Test‐Strip‐Based Fluorometric Detection of Fluoride in Aqueous Media with a BODIPY‐Linked Hydrogen‐Bonding Receptor

The measurement of biologically relevant anions, such as fluoride, is an important task in analytical chemistry, in particular, for dental health and osteoporosis. Although a large number of fluoride probes are known, the applicability under relevant conditions is limited to a few examples. To improve this situation, BODIPY‐amidothiourea dyes with varying hydrogen‐bond donating strengths were developed, the most H‐acidic of which ( 1 c ) could detect F^? from an inorganic source (NaF) in 50 % aqueous solution (DMSO/water 1:1, v/v) with 0.01 ppm sensitivity through selective fluorescence quenching by a photoinduced electron‐transfer (PET) process. Use of the probe and a reference dye with a test‐strip assay and a portable and rapidly recording lateral‐flow fluorescence reader made determination of F^? in neat aqueous solutions, such as spiked water samples and toothpaste extracts, possible in a self‐referenced manner, achieving a detection limit of 0.2 ppm.     

The Structures of Uncommon Cationic N‐alkenyl Purine and Pyrimidine Bases

The structures of 1,3 bis‐(allyl)cytosinium bromide ( 1 ), 7,9 bis‐(allyl)adeninium bromide hydrate ( 2 ) and 3‐(butenyl)adeninium bromide ( 3 ) have been determined. 1 is dimeric via N―H…Br hydrogen bonds, which further associate into ribbons via weaker C―H…Br interactions. 2 is also dimeric, now from N―H…N hydrogen bonds, which build up further through a complex array of hydrogen bonds involving both the anion and water of crystallization (O―H…N, O―H…Br, C―H…Br). 3 does not dimerise but forms polymeric sheets via a series of N―H…N, C―H…N and C―H…Br hydrogen bonds.     

Synthesis of Novel Pyrazino[2,1‐a]isoindolediones via Intramolecular Hydroamination of 2,3‐Dihydro‐3‐oxo‐2‐(prop‐2‐yn‐1‐yl)‐1H‐isoindole‐1‐carboxamides

Novel derivatives of pyrazino[2,1‐a]isoindolediones were synthesized through 6‐exo‐dig intramolecular hydroamination of 2,3‐dihydro‐3‐oxo‐2‐(prop‐2‐yn‐1‐yl)‐1H‐isoindole‐1‐carboxamides followed by 1,3‐H shift, in the presence of sodium hydride in DMF at 80°. All products were obtained in good yields (60 – 80%) within short reaction time (40 – 60 min).     

Hydrogen atom abstraction reactions of the sugar moiety of 2′‐deoxyguanosine with an OH radical: A quantum chemical study

Mechanisms of hydrogen atom abstraction reactions of the sugar moiety of 2′‐deoxyguanosine with an OH radical were investigated using the B3LYP and BHandHLYP functionals of density functional theory and the second order Møller–Plesset Perturbation (MP2) theory in gas phase and aqueous media. The 6‐31+G* and AUG‐cc‐pVDZ basis sets were used. Gibbs free barrier energies and rate constants of the reactions in aqueous media suggest that an OH radical would abstract the hydrogen atoms of the sugar moiety of 2′‐deoxyguanosine in the following order of preference: H5′ ≈ H5″ > H3′ > H4′ > H1′ ≈ H2′ > H2″, the rate constant for H5′ abstraction being 10³–10⁵ times greater than that for H2″ at the different levels of theory. Relative stabilities of the different deoxyribose radicals are also discussed. The most and least favored hydrogen abstraction reactions found here are in agreement with experimental observation. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Antimicrobial Investigation and Structural Study of 4′‐Methylazobenzene‐2‐sulfenyl Thiocyanate by X‐Ray Diffraction,DFT, and Ab Initio HF Calculations

4′‐Methylazobenzene‐2‐sulfenyl thio‐cyanate (MABS‐SCN) was synthesized in an aqueous medium and characterized by ¹H nuclear magnetic resonance, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, and elemental analysis. The crystal structure was confirmed by single crystal X‐ray diffraction and its geometry was optimized in ground state by Hartree–Fock model and (B3LYP) density functional theory, and in solution (ethanol) using polarized continuum model at restricted HF using the basis set 6–31+G*. The compound crystallizes in orthorhombic space group Pbca, with unit cell parameters a = 7.165 (7) Å, b = 18.846 (2) Å, c = 20.379 (2) Å, V = 2752.1 (5) ų, and Z = 8. It attains a planar thiadiazolium salt structure due to strong ortho azo–sulfur interaction imparting exceptional thermal stability, nonreactive solubility in aqueous medium, and high melting crystalline solid nature. A weak intramolecular C H…S type interaction, one C H…S type, four C H…N type intermolecular hydrogen bonds, and van der Waal's interactions are believed to be the stabilizing force for the crystal structure. MABS‐SCN was also tested for antimicrobial activity.     

Synthesis of hyperbranched polymethylvinylborosiloxanes and modification of addition‐curable silicone with improved thermal stability

This paper reports a non‐catalyzed environmentally friendly method of synthesizing hyperbranched polymethylvinylborosiloxanes (PMVBSs) and their use to improve the thermal stability of normal addition‐curable silicones (ACSs). PMVBSs were synthesized by the direct polycondensation of dimethoxymethylvinylsilane with boric acid at 80–130°C in 1,4‐dioxane or diglyme. They were characterized by gel permeation chromatography; FT‐IR; ¹H, ¹³C, ²⁹Si and ¹¹B NMR; and TGA. PMVBSs were composed of Si―O―Si and Si―O―B bridges with some unreacted B―OH groups remaining, and had a ceramic yield up to 65.97% at 900°C. PMVBS‐modified ACSs (PBS‐ACSs) were prepared by curing the PMVBSs with hydrogen‐containing silicone oil under Karstedt (platinum divinyltetramethyldisiloxane) catalysis. Thermal stability of PBS‐ACSs was characterized by TGA in N₂ or air, and ceramic yields as high as 76.7% were obtained. Gas decomposition during the ceramization of PBS‐ACSs was examined by TG/mass spectroscopy. The SiBOC ceramics formed were characterized by FT‐IR, Raman, ²⁹Si and ¹¹B magic angle spinning NMR and elemental analysis. This method provides a valuable way to improve the thermal stability of ACSs. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of 1‐silacyclopent‐2‐ene derivatives using 1,2‐hydroboration, 1,1‐organoboration and protodeborylation

The reaction of di(alkyn‐1‐yl)vinylsilanes R¹(H₂C═CH)Si(C≡C―R)₂ (R¹ = Me ( 1 ), Ph ( 2 ); R = Bu (a), Ph (b), Me₂HSi (c)) at 25°C with 1 equiv. of 9‐borabicyclo[3.3.1]nonane (9‐BBN) affords 1‐silacyclopent‐2‐ene derivatives ( 3a , 3b , 3c , 4a , 4b ), bearing one Si―C≡C―R function readily available for further transformations. These compounds are formed by consecutive 1,2‐hydroboration followed by intramolecular 1,1‐carboboration. Treated with a further equivalent of 9‐BBN in benzene they are converted at relatively high temperature (80–100°C) into 1‐alkenyl‐1‐silacyclopent‐2‐ene derivatives ( 5a , 5b 6a , 6b ) as a result of 1,2‐hydroboration of the Si―C≡C―R function. Protodeborylation of the 9‐BBN‐substituted 1‐silacyclopent‐2‐ene derivatives 3 , 4 , 5 , 6 , using acetic acid in excess, proceeds smoothly to give the novel 1‐silacyclopent‐2‐ene ( 7 , 8 , 9 , 10 ). The solution‐state structural assignment of all new compounds, i.e. di(alkyn‐1‐yl)vinylsilanes and 1‐silacyclopent‐2‐ene derivatives, was carried out using multinuclear magnetic resonance techniques (¹H, ¹³C, ¹¹B, ²⁹Si NMR). The gas phase structures of some examples were calculated and optimized by density functional theory methods (B3LYP/6‐311+G/(d,p) level of theory), and ²⁹Si NMR parameters were calculated (chemical shifts δ²⁹Si and coupling constants ⁿJ(²⁹Si,¹³C)). Copyright © 2014 John Wiley & Sons, Ltd.     

Novel side‐chain naphthalimide polyphenylacetylene as a ratiometric fluorescent chemosensor for fluoride ion

Novel polyphenylacetylene ( P1 ) containing naphthalimides units in the side chain was designed and synthesized. The structure and properties of the polymer were characterized and evaluated by IR, NMR, UV, and PL. The measurements of sensing behavior to various halide anions, that is, F^?, Cl^?, Br^?, and I^?, reveal that the polymer is a ratiometric fluorescent chemosensors for fluoride ion. The polymer sensor shows spectral shifts and intensity changes in the presence of fluoride, in a wavelength‐ratiometric and ‐colorimetric manner, which can detect fluoride concentrations in range of 10–100 μM at visible wavelengths. The obvious colorless‐to‐yellow color change and blue‐to‐orange emission color change on the addition of fluoride ion are easily observed by naked eyes. It provides a feasible way to construct a ratiometric fluorescent chemosensors for fluoride ion. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1544–1552, 2009     

Sulfonated salicylidene thiadiazole complexes with Co (II) and Ni (II) ions as sustainable corrosion inhibitors and catalysts for cross coupling reaction

Condensation of 2,5‐dihydrazinyl thiadiazole with 5‐sodium sulfonate salicylaldehyde afforded dibasic tetradentate pincer N,O,O,N‐salicyldiene thiadiazole ligand (H₂Sanp). The novel dipolar ligand formed para‐magnetic pincer complexes within Co (II) and Ni (II) ions (Co‐Sanp and Ni‐Sanp) under sustainable conditions. The water‐soluble ligand and its metal‐complexes were estimated by mass, IR and UV–Visible spectroscopy, EA (elemental analyses), TGA (Thermogravimetric analyses), magnetic susceptibility, and conductivity measurements. The catalytic reactivity of Co‐Sanp and Ni‐Sanp were evaluated in the Suzuki and Buchwald‐Hartwig cross coupling reaction in aqueous‐methanol binary mixtures. Both reactions of boronic acid or aryl amines with aryl halides gave high chemoselective yield of C―C or C―N product. The inhibition characteristics of H₂Sanp and its Ni‐ and Co‐complexes were performed for the C‐steel corrosion in 1.0 M HCl using electrochemical measurements and surface analysis methods. These methods indicated that the synthesized compounds have served as efficient mixed‐type corrosion inhibitors and their adsorption on the steel surface obeyed isotherm model of Langmuir. Co‐Sanp inhibitor displays the best corrosion inhibition efficiency, and the capacity is up to 97.11% at of 250 mg L^?1. Surface analysis confirms formation of protective layer on the C‐steel surface.     

Highly Effective Recognition of Carbohydrates by Phenanthroline‐Based Receptors: α‐ versus β‐Anomer Binding Preference

¹H NMR spectroscopic titrations in competitive and non‐competitive media, as well as binding studies in two‐phase systems, such as phase transfer of sugars from aqueous into organic solvents and dissolution of solid carbohydrates in apolar media revealed both highly effective recognition of neutral carbohydrates and interesting binding preferences of an acyclic phenanthroline‐based receptor 1 . Compared to the previously described acyclic receptors, compound 1 displays significantly higher binding affinities, the rare capability to extract sugars from water into non‐polar organic solutions and α‐ versus β‐anomer binding preference in the recognition of glycosides, which differs from those observed for other receptor systems. X‐ray crystallographic investigations revealed the presence of water molecules in the binding pocket of 1 that are engaged in the formation of hydrogen‐bonding motifs similar to those suggested by molecular modelling for the sugar OH groups in the receptor–sugar complexes. The molecular modelling calculations, synthesis, crystal structure and binding properties of 1 are described and compared with those of the previously described receptors.     

Synthesis and investigation of dual pH‐ and temperature‐responsive behaviour of poly[2‐(dimethylamino)ethyl methacrylate]‐grafted gold nanoparticles

Gold nanoparticles (AuNPs) were synthesized by reduction of chloroauric acid (HAuCl₄) aqueous solution with hydrazine monohydrate. The AuNPs were immediately treated with cysteamine to obtain amine‐functionalized nanoparticles (Au‐NH₂). The reaction of Au‐NH₂ with epichlorohydrin and subsequent treatment with sodium hydroxide gave epoxidized AuNPs (Au‐EP). Then, thiol‐capped AuNPs (Au‐SH) were synthesized by reaction of Au‐EP with cysteamine. A ‘grafting to’ approach was utilized to graft bromine‐terminated poly(N ,N ′‐dimethylaminoethyl methacrylate), synthesized via aqueous atom transfer radical polymerization, with various molecular weights (6280, 25 800, 64 200 and 87 600 g mol⁻¹) onto Au‐SH to obtain Au‐P1, Au‐P2, Au‐P3 and Au‐P4 samples, respectively. All samples were exposed to temperature and pH variations, and Z‐average diameter was monitored using dynamic light scattering. According to the results, polymer‐grafted nanoparticles collapsed at lower temperatures with increasing solution pH for all molecular weight ranges due to deprotonation of tertiary amine groups. However, higher molecular weight polymers were more sensitive to pH variation especially in alkaline media. Also, a high degree of agglomeration was observed for Au‐P4 nanoparticles in alkaline media on increasing the temperature to 55 and 65 °C.     

Preparation and characterization of natural zeolite supported nano TiO2 photocatalysts by a modified electrostatic self‐assembly method

Natural zeolite supported nano TiO₂ photocatalysts were prepared by a modified electrostatic self‐assembly (ESA) method. First, γ‐mercaptopropyltrimethoxysilane with sulfhydryl (―SH) functional groups was modified on the zeolite powders by using a ‘dry process’. Second, silane with ―SH functional groups was oxidized to sulfonate (―SO₃H) groups by using a hydrogen peroxide/glacial acetic acid mixed solution, and the surface of ―SO₃H silane–zeolite was electronegative charged due to the ionization of ―SO₃H. Third, the hydrolytic titanium polycation from TiCl₄ solution assembled onto the electronegative charged zeolite under electrostatic attraction in the reaction solutions. Finally, zeolite supported nano TiO₂ photocatalysts can be obtained after the above compounds calcined at certain temperature. The samples were characterized by X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface areas, Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS) and X‐ray fluorescence (XRF). The photocatalytic activities of the samples were evaluated by the degradation of methyl orange in aqueous solution. The results showed that ESA method effectively improved the composite efficiency of zeolite with TiO₂. The photocatalysts prepared by ESA method exhibited higher photocatalytic and recycling activities than that of traditional method. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of fluorinated/non‐fluorinated β‐diketones and side‐chain branching of N‐protected amino acids on the antibacterial potential of new heptacoordinated monobutyltin(IV) complexes

The effect of fluorinated/non‐fluorinated β‐diketones and side‐chain branching of N‐protected amino acids on the antibacterial potential of new heptacoordinated monobutyltin(IV) complexes was investigated. New heptacoordinated monobutyltin(IV) complexes having the general formulae BuSn(A)₂B and BuSnA(B)₂ [where AH = (1,3‐dihydro‐1,3‐dioxo‐α‐(substituted)‐2H ‐isoindole‐2‐acetic acids, N‐protected amino acids), R =  CH(CH₃)CH₂CH₃: A₁H; R =  CH(CH₃)₂: A₂H; and BH = R'COCH₂COR″ (β‐diketones), R′ = R″ =  CH₃: B₁H; R′ =  CH₃, R″ =  C₆H₅: B₂H; R′ =  CF₃, R″ =  C₆H₅: B₃H] were synthesized. Complexes BuSn(A)₂B and BuSnA(B)₂ were generated by the reaction of sodium salts of the ligands AH and BH with BuSnCl₃ in 2:1:1 and 1:2:1 molar ratios, respectively. These newly generated complexes were characterized in physicochemical and spectroscopic studies. These complexes contain heptacoordinated tin centres as revealed by ¹¹⁹Sn NMR chemical shift values. Some of the newly generated complexes and their corresponding ligands were screened for their antibacterial activity to study the structure–activity relationship.     

Naked-eye detection of cyanide ions in aqueous media based on an azo-azomethine chemosensor

The optical and colorimetric properties of a new chemosensor 4-((2,4-dichlorophenyl)diazenyl)-2-(3-hydroxypropylimino)methyl)phenol (L) for cyanide ions were investigated by the naked-eye detection and UV–vis spectroscopy. This receptor reveals visual changes toward CN⁻ anions in aqueous media. No significant color changes were observed upon the addition of any other anions. The cyanide recognition properties of the receptor through proton-transfer were monitored by UV–vis titration and ¹H NMR spectroscopy. The binding constant (K_a) and stoichiometry of the formed host–guest complex were calculated by the Benesi–Hildebrand (B–H) plot and Job's plot method, respectively. The detection limit of the probe towards CN⁻ was 1.03 × 10⁻⁶ mol L⁻¹, which is lower than the maximum value of cyanide (1.9 × 10⁻⁶ mol L⁻¹) permitted by the World Health Organization in drinking water. Thus, this chemosensor was sensitive enough to detect cyanide in aqueous solutions. ¹H NMR experiments were conducted to investigate the nature of interaction between the receptor and CN⁻ anions. Notably, the designed sensor can be applied for the rapid detection of cyanide anions in the basic pH range and also under physiological conditions, for practical purposes for a long duration. The sensing behavior of the receptor was further emphasized by computational studies. Quantum-chemical calculations and molecular studies via Density Functional Theory (DFT) were carried out to supplement the experimental results.     

New microstructured chromium doped poly(p‐toluidine) as a new acid–base indicator and precursor for chromic oxide nanostructured

New chromium doped poly(p‐toluidine) (Cr‐PPT) was synthesized via chemical oxidative polymerization of p‐toluidine with potassium dichromate as an initiator in acidic aqueous medium. The spectrophotometric behavior of Cr‐PPT in acetone and chloroform as different solvents was investigated. Cr‐PPT exhibits bathochromically red shift at 46‐nm value with the increasing of solvent polarity. The intermolecular charge transfer band peak for Cr‐PPT shifted from 422 nm in low‐polar solvent (chloroform) to high‐polar solvent (acetone) to 468 nm. Optical absorption measurements are used to obtain the energy gap of prepared Cr‐PPT. Cr‐PPT has an optical band gap (E_g = 1.90 to 2.05 eV) that is located in the semiconductor range. Pink color was observed using Cr‐PPT solution in acidic media while it changes sharply to yellow in basic medium. Based on intermolecular charge transfer, the Cr‐PPT was used as acid–base indicator. Cr‐PPT and phenolphthalein (phph) indicator were used for determination of normality of HCl using standard 0.1 N NaOH, the two indicators gave equal end point values. Using Cr‐PPT as a new molecular precursor for the production chromium oxide in nanoscale by thermal decomposition route was studied, and the average size of synthesized Cr₂O₃ was found in the range of 54–61 nm. Copyright © 2017 John Wiley & Sons, Ltd.     

A new cross‐linked system of silicone rubber based on silicone‐polyurea block copolymer

A new cross‐linked system of silicone rubber (SR) was obtained from silicone‐polyurea block copolymers that was synthesized with aminopropyl terminated polydimethylsiloxane and (4‐isocyanatocyclohexyl)‐methane. SR possessed self‐reinforced and physical cross‐linked structure. It had better mechanical properties that the hardness, the tensile strength, and the elongation at break could reach 65 Shore A, 3.78 MPa, and 458% with the polyurea segment content ranging from 2.01% to 9.13% by weight . The hydrogen bond that led to the physical cross‐linked structure was proved byFourier transform infrared spectroscopy. The microphase separated structure that caused the self‐reinforcement was illustrated by scanning electron microscopy, X‐ray diffraction analysis, and dynamic mechanical analysis. Fourier transform infrared spectroscopy results showed the hydrogen bond formation between the polyurea units. Scanning electron microscopy, dynamic mechanical analysis, and X‐ray diffraction analysis results proved the microphase separation existed between polyurea units and ―Si―O―Si― chains. The increase of polyurea contents enhanced the binding of hydrogen bond and improved the extent of microphase separation. Accordingly, it decreased the thermal properties and lowered the glass transition temperature (T_g) from −108°C to −114°C. Also, the increase of polyurea contents increased the hydrophobicity of SR that the surface free energy could reach to −24.81 mN/m.     

Synthesis and Biological Evaluation of Some New N1‐[4‐(4‐Chlorophenylsulfonyl)benzoyl]‐N 4‐(aryl)‐thiosemicarbazides and Products of Their Cyclization

In the present study, new 1,2,4‐triazoles, 1,3,4‐thiadiazoles, and acylthiosemicarbaz‐ides derived from 4‐(4‐chlorophenylsulfonyl)benzoic acid hydrazide were synthesized and screened for their antimicrobial and analgesic activities. Acylthiosemicarbazides 2–4 were synthesized by a reaction of 4‐(4‐chlorophenyl‐sulfonyl)benzoic acid hydrazide 1 with different arylisothiocyanates.4,5‐Disubstituted‐2,4‐dihydro‐3H‐1,2,4‐triazol‐3‐thiones 5–7 and 2,5‐disubstituted‐1,3,4‐thiadiazoles 8–10 were obtained by dehydrative cyclization of corresponding acylthiosemicarbazide derivatives 2–4 in basic media (8% aqueous sodium hydroxide) and in acidic media (sulfuric acid or phosphorous oxychloride), respectively. The structures of the newly synthesized compounds have been confirmed on the basis of elemental analysis and spectral studies (IR, ¹H NMR, ¹³C NMR, MS). Their antimicrobial activities against some bacteria and yeasts were investigated. The analgesic activity of all compounds was performed with two pharmacological tests: the writhing test induced with acetic acid and hot‐plate test. The results showed that triazole 7 had the best antimicrobial activity against Bacillus cereus. In the chemical stimulus test, triazoles 6 and 7 were the most active compounds whereas in the hot‐plate test thiadiazoles 9 and 10 exhibited the highest analgesic activity.     

Effective removal of 2,4,6‐trinitrophenol over hexagonal metal–organic framework NH2‐MIL‐88B(Fe)

A nanostructured organic–inorganic framework, hexagonal NH₂‐MIL‐88B, has been prepared through a facile one‐pot reflux reaction and then it was characterized using various techniques. The as‐prepared sample with high specific surface area (414 m² g^?1) showed excellent adsorption for 2,4,6‐trinitrophenol (TNP) in the liquid phase. Detailed studies of the adsorption kinetics, adsorption mechanism, adsorption isotherm, activation energy and various thermodynamic parameters were conducted. The adsorption mechanism of NH₂‐MIL‐88B for TNP may be ascribed to hydrogen bond interaction, and the complexation between ─OH in TNP and unsaturated Fe(III) on the surface of NH₂‐MIL‐88B. The maximum adsorption capacity of NH₂‐MIL‐88B for TNP based on the Langmuir isotherm was 163.66 mg g^?1. The as‐prepared NH₂‐MIL‐88B adsorbent seems to be a promising material in practice for TNP removal from aqueous solution.     

Half‐sandwich Ru (II) complexes containing (N,O) Schiff base ligands: Catalysts for base‐free transfer hydrogenation of ketones

Two new half‐sandwich Ru (II)(p‐cymene) complexes ( 1 and 2 ) containing dopamine‐based (N, O) Schiff base ligands ( L ¹ H and L ² H ) were synthesized and characterized by FT‐IR, UV–Visible and ¹H & ¹³C NMR spectral techniques, and elemental analyses. The spectroscopic and analytical data revealed monobasic bidentate coordination of the ligands with Ru ion. The molecular structures of L ¹ H , L ² H and 2 were further confirmed by single crystal X‐ray diffraction study. Complexes 1 and 2  have been employed as catalysts in the transfer hydrogenation of ketones using 2‐propanol as a hydrogen source at 85 °C under base‐free condition. Good to the excellent yield of secondary alcohols, gram scale synthesis, and high TON and TOF made this catalytic system interesting.