Dopant-Induced Electronic States Regulation Boosting Electroreduction of Dilute Nitrate to Ammonium

Electrochemically converting NO₃⁻ into NH₃ offers a promising route for water treatment. Nevertheless, electroreduction of dilute NO₃⁻ is still suffering from low activity and/or selectivity. Herein, B as a modifier was introduced to tune electronic states of Cu and further regulate the performance of electrochemical NO₃⁻ reduction reaction (NO₃RR) with dilute NO₃⁻ concentration (≤100 ppm NO₃⁻−N). Notably, a linear relationship was established by plotting NH₃ yield vs. the oxidation state of Cu, indicating that the increase of Cu⁺ content leads to an enhanced NO₃⁻-to-NH₃ conversion activity. Under a low NO₃⁻−N concentration of 100 ppm, the optimal Cu(B) catalyst displays a 100 % NO₃⁻-to-NH₃ conversion at −0.55 to −0.6 V vs. RHE, and a record-high NH₃ yield of 309 mmol h⁻¹ g_cat⁻¹, which is more than 25 times compared with the pristine Cu nanoparticles (12 mmol h⁻¹ g_cat⁻¹). This research provides an effective method for conversion of dilute NO₃⁻ to NH₃, which has certain guiding significance for the efficient and green conversion of wastewater in the future.     

Ammonium and Phosphate Quantification in Wastewater by Using a Voltammetric Electronic Tongue

Ammonia (NH₄? N) and orthophosphate (PO₄? P) quantification in wastewater treatment plants is important due to their implication in the eutrophication process. A voltammetric electronic tongue as a tool for the prediction of ammonia and orthophosphate concentrations from influent and effluent wastewater is proposed herein. An electrochemical study of the response of the ammonium and orthophosphate ions was performed in order to design a suitable waveform for each electrode. Partial Least Squares analysis was used to obtain a correlation between the data from the tongue and the concentrations of ammonia and orthophosphate measured in the laboratory showing good predictive power.     

Molecular Engineering of a Metal-Organic Polymer for Enhanced Electrochemical Nitrate-to-Ammonia Conversion and Zinc Nitrate Batteries

Metal–organic framework-based materials are promising single-site catalysts for electrocatalytic nitrate (NO₃⁻) reduction to value-added ammonia (NH₃) on account of well-defined structures and functional tunability but still lack a molecular-level understanding for designing the high-efficient catalysts. Here, we proposed a molecular engineering strategy to enhance electrochemical NO₃⁻-to-NH₃ conversion by introducing the carbonyl groups into 1,2,4,5-tetraaminobenzene (BTA) based metal-organic polymer to precisely modulate the electronic state of metal centers. Due to the electron-withdrawing properties of the carbonyl group, metal centers can be converted to an electron-deficient state, fascinating the NO₃⁻ adsorption and promoting continuous hydrogenation reactions to produce NH₃. Compared to CuBTA with a low NO₃⁻-to-NH₃ conversion efficiency of 85.1 %, quinone group functionalization endows the resulting copper tetraminobenzoquinone (CuTABQ) distinguished performance with a much higher NH₃ FE of 97.7 %. This molecular engineering strategy is also universal, as verified by the improved NO₃⁻-to-NH₃ conversion performance on different metal centers, including Co and Ni. Furthermore, the assembled rechargeable Zn−NO₃⁻ battery based on CuTABQ cathode can deliver a high power density of 12.3 mW cm⁻². This work provides advanced insights into the rational design of metal complex catalysts through the molecular-level regulation for NO₃⁻ electroreduction to value-added NH₃.     

Effect of inorganic anions on the titanium dioxide-based photocatalytic oxidation of aqueous ammonia and nitrite

In this study, we investigated the effects of four inorganic anions (Cl⁻, SO₄²⁻, H₂PO₄⁻/HPO₄²⁻, and HCO₃⁻/CO₃²⁻) on titanium dioxide (TiO₂)-based photocatalytic oxidation of aqueous ammonia (NH₄⁺/NH₃) at pH ∼ 9 and ∼10 and nitrite (NO₂⁻) over the pH range of 4–11. The initial rates of NH₄⁺/NH₃ and NO₂⁻ photocatalytic oxidation are dependent on both the pH and the anion species. Our results indicate that, except for CO₃²⁻, which decreased the homogeneous oxidation rate of NH₄⁺/NH₃ by UV-illuminated hydrogen peroxide, OH scavenging by anions and/or direct oxidation of NH₄⁺/NH₃ and NO₂⁻ by anion radicals did not affect rates of TiO₂ photocatalytic oxidation. While HPO₄²⁻ enhanced NH₄⁺/NH₃ photocatalytic oxidation at pH ∼ 9 and ∼10, H₂PO₄⁻/HPO₄²⁻ inhibited NO₂⁻ oxidation at low to neutral pH values. The presence of Cl⁻, SO₄²⁻, and HCO₃⁻ had no effect on NH₄⁺/NH₃ and NO₂⁻ photocatalytic oxidation at pH ∼ 9 and ∼10, whereas CO₃²⁻ slowed NH₄⁺/NH₃ but not NO₂⁻ photocatalytic oxidation at pH ∼ 11. Photocatalytic oxidation of NH₄⁺/NH₃ to NO₂⁻ is the rate-limiting step in the complete oxidation of NH₄⁺/NH₃ to NO₃⁻ in the presence of common wastewater anions. Therefore, in photocatalytic oxidation treatment, we should choose conditions such as alkaline pH that will maximize the NH₄⁺/NH₃ oxidation rate.     

Dinitramidoborates: A Fascinating Case of Competing Oxygen and Nitrogen Donors and Tautomerism

Reactions of the BH₄⁻ anion with equimolar amounts of HN(NO₂)₂ or of BH₃⋅THF with K[N(NO₂)₂]⁻ produced a mono‐substituted [BH₃N(NO₂)₂]⁻ anion, which contains a B−N connected dinitramido ligand. The reaction of BH₄⁻ with two equivalents of HN(NO₂)₂ afforded the di‐substituted borate anion consisting of two isomers, one with both nitramido ligands attached to B through N and the other one with one ligand attached through N and the other one through O. The disubstituted dinitramidoborates are marginally stable under ambient conditions, and the isomer with two N‐connected ligands was characterized by its crystal structure. A tri‐substituted borate was tentatively identified by NMR in the reaction of BH₄⁻ with a large excess of HN(NO₂)₂. All of the anions are highly energetic. Theoretical calculations show that the energy differences between the B−N and B−O tautomers are small, explaining the formation of both.     

Electrochemical nitrate reduction to produce ammonia integrated into wastewater treatment: Investigations and challenges

Nitrate (NO₃⁻) is widely found in wastewater, which is harmful to human health and water environmental. Electrochemical reduction can convert NO₃⁻ to high value-added ammonia (NH₃)/ammonium (NH₄⁺) for pollutant removal and resource recovery. Currently, electrochemical nitrate reduction to produce ammonia (ENRA) is mostly focused on the preparation of high-performance catalysts, while ignoring the prerequisite for industrial application as the stable operation and optimal regulation of the process. Therefore, the review focused on wastewater treatment, based on the mechanism of electrochemical nitrate reduction for ammonia production and reactor construction (reactor, power supply system), then summarized the operation control strategies (such as reduction potential, nitrate concentration, inorganic ions, pH) that should be noted for ENRA. Finally, the challenges (system structure, economy) and prospects (ammonia recovery process, construction of large-scale ENRA system, application of real wastewater) of the field as it moves towards commercialization were discussed. It is hoped that this review will facilitate the scaling up of ENRA in the wastewater treatment field.     

Enhancing Electrochemical Nitrate Reduction to Ammonia over Cu Nanosheets via Facet Tandem Catalysis

Electrochemical conversion of nitrate (NO₃⁻) into ammonia (NH₃) represents a potential way for achieving carbon-free NH₃ production while balancing the nitrogen cycle. Herein we report a high-performance Cu nanosheets catalyst which delivers a NH₃ partial current density of 665 mA cm⁻² and NH₃ yield rate of 1.41 mmol h⁻¹ cm⁻² in a flow cell at −0.59 V vs. reversible hydrogen electrode. The catalyst showed a high stability for 700 h with NH₃ Faradaic efficiency of ≈88 % at 365 mA cm⁻². In situ spectroscopy results verify that Cu nanosheets are in situ derived from the as-prepared CuO nanosheets under electrochemical NO₃⁻ reduction reaction conditions. Electrochemical measurements and density functional theory calculations indicate that the high performance is attributed to the tandem interaction of Cu(100) and Cu(111) facets. The NO₂⁻ generated on the Cu(100) facets is subsequently hydrogenated on the Cu(111) facets, thus the tandem catalysis promotes the crucial hydrogenation of *NO to *NOH for NH₃ production.     

Energetic Hydrazine‐Based Salts with Nitrogen‐Rich and Oxidizing Anions

1,1,1‐Trimethylhydrazinium iodide ([(CH₃)₃N? NH₂]I, 1 ) was reacted with a silver salt to form the corresponding nitrate ([(CH₃)₃N? NH₂][NO₃], 2 ), perchlorate ([(CH₃)₃N? NH₂][ClO₄], 3 ), azide ([(CH₃)₃N? NH₂][N₃], 4 ), 5‐amino‐1H‐tetrazolate ([(CH₃)₃N? NH₂][H₂N? CN₄], 5 ), and sulfate ([(CH₃)₃N? NH₂]₂[SO₄]?2H₂O, 6 ?2H₂O) salts. The metathesis reaction of compound 6 ?2H₂O with barium salts led to the formation of the corresponding picrate ([(CH₃)₃N? NH₂][(NO₂)₃Ph ‐ O], 7 ), dinitramide ([(CH₃)₃N? NH₂][N(NO₂)₂], 8 ), 5‐nitrotetrazolate ([(CH₃)₃N? NH₂][O₂N? CN₄], 9 ), and nitroformiate ([(CH₃)₃N? NH₂][C(NO₂)₃], 10 ) salts. Compounds 1 – 10 were characterized by elemental analysis, mass spectrometry, infrared/Raman spectroscopy, and multinuclear NMR spectroscopy (¹H, ¹³C, and ¹⁵N). Additionally, compounds 1 , 6 , and 7 were also characterized by low‐temperature X‐ray diffraction techniques (XRD). Ba(NH₄)(NT)₃ (NT=5‐nitrotetrazole anion) was accidentally obtained during the synthesis of the 5‐nitrotetrazole salt 9 and was also characterized by low‐temperature XRD. Furthermore, the structure of the [(CH₃)₃N? NH₂]⁺ cation was optimized using the B3LYP method and used to calculate its vibrational frequencies, NBO charges, and electronic energy. Differential scanning calorimetry (DSC) was used to assess the thermal stabilities of salts 2 – 5 and 7 – 10 , and the sensitivities of the materials towards classical stimuli were estimated by submitting the compounds to standard (BAM) tests. Lastly, we computed the performance parameters (detonation pressures/velocities and specific impulses) and the decomposition gases of compounds 2 – 5 and 7 – 10 and those of their oxygen‐balanced mixtures with an oxidizer.     

Fe-Doped CoS2 Nanoarrays: Efficient Electrocatalytic Nitrate Reduction to Ammonia under Ambient Conditions

The electrocatalytic nitrate reduction reaction (NO₃⁻RR) enables the reduction of nitrate to ammonium ions under ambient conditions. It was considered as an alternative reaction for the production of ammonia (NH₃) in recent years. In this paper, we report that the Fe doping CoS₂ nanoarrays can effectively catalyze the formation of NH₃ from nitrate (NO₃⁻) under ambient conditions. This is mainly due to the increase of the NO₃⁻ reaction active site by Fe doping and the porous nanostructure of the catalyst, which greatly improves the catalytic activity. Specifically, at −0.9 V vs. RHE, the NH₃ yield rate (R_NH3) of Fe−CoS₂/CC is 17.8×10⁻² mmol h⁻¹ cm⁻² with Faraday Efficiency (FE) of 88.93 %. Besides, such catalyst shows good durability and catalytic stability, which provides the possibility for the future application of electrocatalytic NH₃ production.     

4‐Carboxypiperidinium 1‐carboxycyclobutane‐1‐carboxylate

The title salt, C₆H₁₂NO₂⁺·C₆H₇O₄⁻ or ISO⁺·CBDC⁻, is an ionic ensemble assisted by hydrogen bonds. The amino acid moiety (ISO or piperidine‐4‐carboxylic acid) has a protonated ring N atom (ISO⁺ or 4‐carboxypiperidinium), while the semi‐protonated acid (CBDC⁻ or 1‐carboxycyclobutane‐1‐carboxylate) has the negative charge residing on one carboxylate group, leaving the other as a neutral –COOH group. The –⁺NH₂– state of protonation allows the formation of a two‐dimensional crystal packing consisting of zigzag layers stacked along a separated by van der Waals distances. The layers extend in the bc plane connected by a complex network of N—H...O and O—H...O hydrogen bonds. Wave‐like ribbons, constructed from ISO⁺ and CBDC⁻ units and described by the graph‐set symbols C₃³(10) and R₃³(14), run alternately in opposite directions along c. Intercalated between the ribbons are ISO⁺ cations linked by hydrogen bonds, forming rings described by the graph‐set symbols R₆⁶(30) and R₄²(18). A detailed analysis of the structures of the individual components and the intricate hydrogen‐bond network of the crystal structure is given.     

Computational study of structures and proton transfer in hydrogen‐bonded ammonia complexes using semiempirical valence‐bond approach

In this study, the seGVB method was implemented for the N H bonding system, specifically for hydrogen‐bonded ammonia complexes, and the model well reproduces the MP2 geometries and energetics. A comparison between the ammonia dimer and water dimer is given from the viewpoint of valance‐bond structures in terms of the calculated bond energies and pair–pair interactions. The linear hydrogen bond is found to be stronger than the bent bonds in both cases, with the difference in energy between the linear and cyclic structures being comparable in both cases although the NH bonds are generally weaker. The energy decomposition clearly demonstrates that the changes in electronic energy are quite different in the two cases due to the presence of an additional lone pair on the water molecule, and it is this effect which leads to the net stabilization of the cyclic structure for the ammonia dimer. Proton‐transfer profiles for hydrogen‐bonded ammonia complexes [NH₂ H NH₂]⁻ and [NH₃ H NH₃]⁺ were calculated. The barrier for proton transfer in [NH₃ H NH₃]⁺ is larger than that in [NH₂ H NH₂]⁻, but smaller than that in the protonated water dimer. The different bonding structures substantially affect the barrier to proton transfer, even though they are isoelectronic systems. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 73: 357–367, 1999     

l‐Methioninium chloride and l‐seleno­methioninium chloride at 103 K

The crystal structures of the title compounds, (S)‐1‐carboxy‐3‐(methyl­sulfanyl)­propanaminium chloride, C₅H₁₂NO₂S⁺·Cl⁻, and (S)‐1‐carboxy‐3‐(methyl­selanyl)­propanaminium chloride, C₅H₁₂NO₂Se⁺·Cl⁻, are isomorphous. The proton­ated l ‐methionine and l ‐seleno­methionine mol­ecules have almost identical conformations and create very similar contacts with the Cl⁻ anions in the crystal structures of both compounds. The amino acid cations and the Cl⁻ anions are linked viaN—H⋯Cl⁻ and O—H⋯Cl⁻ hydrogen bonds.     

Tandem Electrocatalytic Nitrate Reduction to Ammonia on MBenes

We demonstrate the great feasibility of MBenes as a new class of tandem catalysts for electrocatalytic nitrate reduction to ammonia (NO₃RR). As a proof of concept, FeB₂ is first employed as a model MBene catalyst for the NO₃RR, showing a maximum NH₃-Faradaic efficiency of 96.8 % with a corresponding NH₃ yield of 25.5 mg h⁻¹ cm⁻² at −0.6 V vs. RHE. Mechanistic studies reveal that the exceptional NO₃RR activity of FeB₂ arises from the tandem catalysis mechanism, that is, B sites activate NO₃⁻ to form intermediates, while Fe sites dissociate H₂O and increase *H supply on B sites to promote the intermediate hydrogenation and enhance the NO₃⁻-to-NH₃ conversion.     

Boosting Electrocatalytic Nitrate-to-Ammonia via Tuning of N-Intermediate Adsorption on a Zn−Cu Catalyst

The renewable-energy-powered electroreduction of nitrate (NO₃⁻) to ammonia (NH₃) has garnered significant interest as an eco-friendly and promising substitute for the Haber–Bosch process. However, the sluggish kinetics hinders its application at a large scale. Herein, we first calculated the N-containing species (*NO₃ and *NO₂) binding energy and the free energy of the hydrogen evolution reaction over Cu with different metal dopants, and it was shown that Zn was a promising candidate. Based on the theoretical study, we designed and synthesized Zn-doped Cu nanosheets, and the as-prepared catalysts demonstrated excellent performance in NO₃⁻-to-NH₃. The maximum Faradaic efficiency (FE) of NH₃ could reach 98.4 % with an outstanding yield rate of 5.8 mol g⁻¹ h⁻¹, which is among the best results up to date. The catalyst also had excellent cycling stability. Meanwhile, it also presented a FE exceeding 90 % across a wide potential range and NO₃⁻ concentration range. Detailed experimental and theoretical studies revealed that the Zn doping could modulate intermediates adsorption strength, enhance NO₂⁻ conversion, change the *NO adsorption configuration to a bridge adsorption, and decrease the energy barrier, leading to the excellent catalytic performance for NO₃⁻-to-NH₃.     

Kinetics of oxidation and comproportionation reactions involving an oxammonium ion,benzyl alcohol and methyltrioxorhenium(VII)

The reactions of 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinium N‐oxide, an oxammonium ion abbreviated R₂NO⁺, have been studied. The previously unreported triflate salt was used in this study because the anions of the usual chloride and bromide salts can themselves be oxidized. Reactions between R₂NO⁺ and alcohols produce ketones and aldehydes; the rate constant for PhCH₂OH is 4.4 × 10⁻³ L mol⁻¹ s⁻¹ in acetonitrile at 298 K. The immediate product is the hydroxylamine, R₂NOH, but its further comproportionation reaction with R₂NO⁺ yields the stable piperidinyl oxyl radical, R₂NO^·. The rate constant of this reaction is 1.78 × 10³ L mol⁻¹ s⁻¹ at 298 K. The possibility of using R₂NO⁺ and MTO as co‐catalysts for the oxidation of alcohols was explored, but the competitive rates are such that the resultant is not particularly attractive. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 381–385, 1999     

Hydrogen bonding in the bromide salts of 4‐aminobenzoic acid and 4‐aminoacetophenone

In the title compounds, 4‐carboxyanilinium bromide, C₇H₈NO₂⁺·Br⁻, (I), and 4‐acetylanilinium bromide, C₈H₁₀NO⁺·Br⁻, (II), each asymmetric unit contains a discrete cation with a protonated amino group and a halide anion. Both crystal structures are characterized by two‐dimensional hydrogen‐bonded networks. The ions in (I) are connected via N—H...Br, N—H...O and O—H...Br hydrogen bonds, with three characteristic graph‐set motifs, viz. C(8), C₂¹(4) and R₃²(8). The centrosymmetric hydrogen‐bonded R²₂(8) dimer motif characteristic of carboxylic acids is absent. The ions in (II) are connected via N—H...Br and N—H...O hydrogen bonds, with two characteristic graph‐set motifs, viz. C(8) and R₄²(8). The significance of this study lies in its illustration of the differences between the supramolecular aggregations in two similar compounds. The presence of the methyl group in (II) at the site corresponding to the hydroxyl group in (I) results in a significantly different hydrogen‐bonding arrangement.     

Electrical Pulse-Driven Periodic Self-Repair of Cu-Ni Tandem Catalyst for Efficient Ammonia Synthesis from Nitrate

Electrocatalytic nitrate reduction sustainably produces ammonia and alleviates water pollution, yet is still challenging due to the kinetic mismatch and hydrogen evolution competition. Cu/Cu₂O heterojunction is proven effective to break the rate-determining NO₃⁻-to-NO₂⁻ step for efficient NH₃ conversion, while it is unstable due to electrochemical reconstruction. Here we report a programmable pulsed electrolysis strategy to achieve reliable Cu/Cu₂O structure, where Cu is oxidized to CuO during oxidation pulse, then regenerating Cu/Cu₂O upon reduction. Alloying with Ni further modulates hydrogen adsorption, which transfers from Ni/Ni(OH)₂ to N-containing intermediates on Cu/Cu₂O, promoting NH₃ formation with a high NO₃⁻-to-NH₃ Faraday efficiency (88.0±1.6 %, pH 12) and NH₃ yield rate (583.6±2.4 μmol cm⁻² h⁻¹) under optimal pulsed conditions. This work provides new insights to in situ electrochemically regulate catalysts for NO₃⁻-to-NH₃ conversion.     

Density functional theory investigation of the binding interactions between phosphoryl,carbonyl, imino,and thiocarbonyl ligands and the pentaaqua nickel(II) complex: Coordination affinity and associated parameters

Density Functional Theory (UB3LYP/6‐311++G(d,p)) calculations of the affinity of the pentaaqua nickel(II) complex for a set of phosphoryl [O?P(H)(CH₃)(PhR)], imino [HN?C(CH₃)(PhR)], thiocarbonyl [S?C(CH₃)(PhR)] and carbonyl [O?C(CH₃)(PhR)] ligands were performed, where R?NH₂, OCH₃, OH, CH₃, H, Cl, CN, and NO₂ is a substituent at the para‐position of a phenyl ring.The affinity of the pentaaqua nickel(II) complex for these ligands was analized and quantified in terms of interaction enthalpy (ΔH), Gibbs free energy (ΔG²⁹⁸), geometric and electronic parameters of the resultant octahedral complexes. The ΔH and ΔG²⁹⁸ results show that the ligand coordination strength increases in the following order: carbonyl < thiocarbonyl < imino < phosphoryl. This coordination strength order is also observed in the analysis of the metal‐ligand distances and charges on the ligand atom that interacts with the Ni(II) cation. The electronic character of the substituent R is the main parameter that affects the strength of the metal‐ligand coordination. Ligands containing electron‐donating groups (NH₂, OCH₃, OH) have more exothermic ΔH and ΔG²⁹⁸ than ligands with electron‐withdrawing groups (Cl, CN, NO₂). The metal‐ligand interaction decomposed by means of the energy decomposition analysis (EDA) method shows that the electronic character of the ligand modulates all the components of the metal‐ligand interaction. The absolute softness of the free ligands is correlated with the covalent contribution to the instantaneous interaction energy calculated using the EDA method. © 2013 Wiley Periodicals, Inc.     

4‐Methoxyanilinium tetrafluoroborate–dibenzo‐18‐crown‐6 (1/1)

In the structure of the complex of dibenzo‐18‐crown‐6 [systematic name: 2,5,8,15,18,21‐hexaoxatricyclo[20.4.0.0^9,14]hexacosa‐1(26),9,11,13,22,24‐hexaene] with 4‐methoxyanilinium tetrafluoroborate, C₇H₁₀NO⁺·BF₄⁻·C₂₀H₂₄O₆, the protonated 4‐methoxyanilinium (MB‐NH₃⁺) cation forms a 1:1 supramolecular rotator–stator complex with the dibenzo‐18‐crown‐6 molecule via N—H...O hydrogen bonds. The MB‐NH₃⁺ group is attached from the convex side of the bowl‐shaped crown, in contrast with similar ammonium cations that nest in the curvature of the bowl. The cations are associated via C—H...π interactions, while the cations and anions are linked by weak C—H...F hydrogen bonds, forming cation–crown–anion chains parallel to [011].     

Tapioca Biofilm Containing Nitrogen‐doped Titanium Dioxide Nanoparticles for Electrochemical Detection of 17‐β Estradiol

A novel sensor architecture based on thin film of tapioca decorated within nitrogen‐doped titanium dioxide (N‐TiO₂) nanoparticles is reported. The nanostructures were characterized by scanning electron microscope, transmission electron microscope, X‐rays diffraction and voltammetric techniques. The proposed electrode was used for detection of low concentrations of 17‐β estradiol in without purification step, which was investigated by using linear sweep adsorptive stripping voltammetry. Under optimal conditions, the analytical curve was linear over a 17β‐estradiol concentration range of 9.9×10⁻⁶ to 1.4×10⁻⁵ mol L⁻¹, with a detection limit of 1.7×10⁻⁷ mol L⁻¹. The tapioca and N‐TiO₂ nanoparticles homogeneous film was applied for detection of 17‐β‐estradiol in tap water and synthetic urine samples, which presented satisfactory results.