Anodic stripping voltammetry of antimony at unmodified carbon electrodes

Antimony is an element of significant environmental concern, yet has been neglected relative to other heavy metals in electroanalysis. As such very little research has been reported on the electroanalytical determination of antimony at unmodified carbon electrodes. In this paper we report the electrochemical determination of Sb(III) in HCl solutions using unmodified carbon substrates, with focus on non-classical carbon materials namely edge plane pyrolytic graphite (EPPG), boron doped diamond (BDD) and screen-printed electrodes (SPE). Using differential pulse anodic stripping voltammetry, EPPG was found to give a considerably greater response towards antimony than other unmodified carbon electrodes, allowing highly linear ranges in nanomolar concentrations and a detection limit of 3.9?nM in 0.25?M HCl. Furthermore, the sensitivity of the response from EPPG was 100 times greater than for glassy carbon (GC). Unmodified GC gave a comparable response to previous results using the bare substrate, and BDD gave an improved, yet still very high limit of detection of 320?nM compared to previous analysis using an iridium oxide modified BDD electrode. SPEs gave a very poor response to antimony, even at high concentrations, observing no linearity from standard additions, as well as a major interference from the ink intrinsic to the working electrode carbon material. Owing to its superior performance relative to other carbon electrodes, the EPPG electrode was subjected to further analytical testing with antimony. The response of the electrode for a 40?nM concentration of Sb(III) was reproducible with a mean peak current of 1.07?µA and variation of 8.4% (n?=?8). The effect of metals copper, bismuth and arsenic were investigated at the electrode, as they are common interferences for stripping analysis of antimony.     

A flow injection method for the analysis of tetracycline antibiotics in pharmaceutical formulations using electrochemical detection at anodized boron-doped diamond thin film electrode

A method using flow injection (FI) with amperometric detection at anodized boron-doped diamond (BDD) thin films has been developed and applied for the determination of tetracycline antibiotics (tetracycline, chlortetracycline, oxytetracycline and doxycycline). The electrochemical oxidation of the tetracycline antibiotics was studied at various carbon electrodes including glassy carbon (GC), as-deposited BDD and anodized BDD electrodes using cyclic voltammetry. The anodized BDD electrode exhibited well-defined irreversible cyclic voltammograms for the oxidation of tetracycline antibiotics with the highest current signals compared to the as-deposited BDD and glassy carbon electrodes. Low detection limit of 10 nM (signal-to-noise RATIO = 3) was achieved for each drug when using flow injection analysis with amperometric detection at anodized BDD electrodes. Linear calibrations were obtained from 0.1 to 50 mM for tetracycline and 0.5–50 mM for chlortetracycline, oxytetracycline and doxycycline. The proposed method has been successfully applied to determine the tetracycline antibiotics in some drug formulations. The results obtained in percent found (99.50–103.01%) were comparable to dose labeled.     

Paper‐based Electrochemical Devices Coupled to External Graphene‐Cu Nanoparticles Modified Solid Electrode through Meniscus Configuration and their Use in Biological Analysis

This paper demonstrates, for the first time, the use of paper‐based electrochemical devices coupled to external solid working electrodes. The paper‐based electrochemical cells were fabricated using inexpensive and largely available office paper, according to a simple protocol that consists on the creation of hydrophobic barriers using paraffinized paper and preheated metal stamp. The counter and reference electrodes were integrated to the paper platform through the deposition of carbon and silver inks, respectively. The electrochemical paper analytical device (ePAD) was coupled to external glassy carbon rod electrode modified with reduced graphene oxide doped with Cu nanoparticles through meniscus configuration. The analytical usefulness of this electrochemical approach was demonstrated through the simultaneous determination of paracetamol and caffeine in biological samples. The analytes were successfully quantified in real urine samples and limits of detection of 24.6 nM (paracetamol) and 36.1 nM (caffeine) were obtained. The paper platform showed good stability (RSD of 1.07 % for the peak currents and 1.43 % for the peak potentials) and satisfactory performance. The use of solid electrodes coupled to paper electrochemical devices, firstly demonstrated here, opens new possibilities for the utilization of ePADs in electrochemistry and electroanalytical chemistry and offers advantages such as the extremely reduced consumption of reagents and the minimal generation of wastes.     

Electrochemical Glutathione Sensor Based on Electrochemically Deposited Poly‐m‐aminophenol

Preparation and characterization of electrodes suitable for determination of glutathione is reported in this study. For this poly‐m‐aminophenol (PmAP), poly‐o‐aminophenol, and poly‐p‐aminophenol were electrochemically deposited from aqueous solution on the surface of glassy carbon (GC) electrode by potential cycling in the range of +0.2–+1.0 V. The modified GC electrodes were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, contact angle measurement and ellipsometry. It was found that poly‐m‐aminophenol modified GC electrode (PmAP/GC‐electrode) is most suitable for electroanalytical determination of glutathione. An electroanalytical system for the determination of glutathione based on the PmAP/GC‐electrode was developed. The analytical system was characterized by low limit of detection, good stability, high sensitivity and wide linear detection range.     

Bio-electrocatalysis of NADH and ethanol based on graphene sheets modified electrodes

Characterization and application of graphene sheets modified glassy carbon electrodes (graphene/GC) have been presented for the electrochemical bio-sensing. A probe molecule, potassium ferricyanide is employed to study the electrochemical response at the graphene/GC electrode, which shows better electron transfer than graphite modified (graphite/GC) and bare glassy carbon (GC) electrodes. Based on the highly enhanced electrochemical activity of NADH, alcohol dehydrogenase (ADH) is immobilized on the graphene modified electrode and displays a more desirable analytical performance in the detection of ethanol, compared with graphite/GC or GC based bio-electrodes. It also exhibits good performance of ethanol detection in the real samples. From the results of electrochemical investigation, graphene sheets with a favorable electrochemical activity could be an advanced carbon electrode materials for the design of electrochemical sensors and biosensors.     

Quick and Easy Modification of Glassy Carbon Electrodes with Ionic Liquid and Tetraruthenated Porphyrins for the Electrochemical Determination of Atrazine in Water

Atrazine is a pesticide used to control broadleaf weeds, however its wide distribution and its high persistence in the soil and in surface waters has resulted in a public and environmental health problem. Present results shows the design, construction and characterization of glassy carbon electrodes modified with tetrarutenated metalloporphyrin (M=Ni (II) and Zn (II)) and 1‐butyl‐3‐methylimidazolium bis (trifluoromethylsulfonyl) imide, BMIMNTF₂. The modification was reproducible and sensitive for the electrochemical detection of atrazine in neutral media. The detection limit was 230 nM when using GC/BMIMNTF₂/ZnTRP and 540 nM with GC/BMIMNTF₂/NiTRP, meaning that his methodology can be a feasible and inexpensive way to detect atrazine in trace levels.     

β‐Cyclodextrin‐Platinum Nanoparticles/Graphene Nanohybrids: Enhanced Sensitivity for Electrochemical Detection of Naphthol Isomers

Naphthol isomers, including α‐naphthol (α‐NAP) and β‐naphthol (β‐NAP), are used widely in various fields and are harmful to the environment and human health. The qualitative and quantitative determination of naphthol isomers is therefore of great significance. Herein, β‐cyclodextrin (β‐CD)‐platinum nanoparticles (Pt NPs)/graphene nanosheets (GNs) nanohybrids (β‐CD‐PtNPs/GNs) were prepared for the first time using a simple wet chemical method and characterized by atomic force microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and electrochemical methods, and then applied successfully in the ultrasensitive electrochemical detection of naphthol isomers. The results show that the oxidation peak currents of naphthol isomers obtained at the glassy carbon (GC) electrode modified with β‐CD‐PtNPs/GNs are much higher than those at the β‐CD/GNs/GC, PtNPs/GNs/GC, GNs/GC, and bare GC electrodes. Additionally, compared with other electrochemical sensors developed previously, the proposed electrode results in improved detection limits of about one order of magnitude for α‐NAP (0.23 nM ) and three orders of magnitude for β ‐NAP (0.37 nM ).     

Recent electroanalytical applications of boron-doped diamond electrodes

This review overviews recent reports on the electroanalytical applications of boron-doped diamond (BDD) electrodes. Because BDD electrodes have excellent features for electroanalysis, such as wide potential window, low background current, electrochemical stability, and fouling resistance, they can be useful for sensitive and stable detection of various substances, including drugs, bio-related substances, metal ions, and organic pollutants. Many articles have reported high-sensitivity detection of real samples, demonstrating that this electrode material is practically applicable. Surface modification of the BDD electrodes using metal nanoparticles, nanocarbons, and polymers can increase the sensitivity of the electrochemical detection. Furthermore, research on the electroanalytical device equipped with BDD electrodes will be expanded by combining peripheral technologies related to the device fabrication.     

金纳米粒子/聚多巴胺/碳纳米管修饰玻碳电极对核黄素的测定

采用原位还原法制备金纳米粒子/聚多巴胺/碳纳米管（Au-PDA-MWNTs）复合材料,并将其用于建立高灵敏检测核黄素的电化学方法.采用紫外–可见光谱、扫描电镜、x-射线能谱对Au-PDA-MWNTs复合材料进行表征,采用循环伏安法和差示脉冲伏安法探讨核黄素（RF）在Au-PDA-MWNTs修饰的玻碳电极上的电化学行为,并对RF含量进行测定.该方法对核黄素的检测在5×10^-9 mol·L^-1～1×10^-5 mol·L^-1的范围内呈良好的线性关系（R=0.9906）,检测限为1.7×10^-9 mol·L^-1.本方法操作简便、抗干扰能力强,方法可行,因此该方法成功实现了维生素药片中RF含量的测定.     

Construction of an electrochemical sensor based on the electrodeposition of Au-Pt nanoparticles mixtures on multi-walled carbon nanotubes film for voltammetric determination of cefotaxime

Mixtures of gold-platinum nanoparticles (Au-PtNPs) are fabricated consecutively on a multi-walled carbon nanotubes (MWNT) coated glassy carbon electrode (GCE) by the electrodeposition method. The surface morphology and nature of the hybrid film (Au-PtNPs/MWCNT) deposited on glassy carbon electrodes is characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques. The modified electrode is used as a new and sensitive electrochemical sensor for the voltammetric determination of cefotaxime (CFX). The electrochemical behavior of CFX is investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results of voltammetric studies exhibited a considerable improvement in the oxidation peak current of CFX compared to glassy carbon electrodes individually coated with MWCNT or Au-PtNPs. Under the optimized conditions, the modified electrode showed a wide linear dynamic range of 0.004-10.0 μM with a detection limit of 1.0 nM for the voltammetric determination of CFX. The modified electrode was successfully applied for the accurate determination of trace amounts of CFX in pharmaceutical and clinical preparations.     

Solidified floating organic drop microextraction for determination of trace amounts of zinc in water samples by flame atomic absorption spectrometry

A glassy carbon electrode was prepared that was coated with a composite film containing electropolymerized poly(amidosulfonic acid) and multi-walled carbon nanotubes. It was used to study the electrochemical response of procaine by differential pulse voltammetry. The results indicate that the electrode exhibits a remarkable improvement in the oxidation peak of procaine, and this led to a simple and sensitive method for the electroanalytical determination of procaine. The peak current is proportional to the concentration of procaine from 80 nM to 1.0 µM. The detection limit is 25 nM (S/N?=?3). The modified electrode was successfully applied to the direct determination of procaine in pharmaceutical formulations.     

Sensitive electrochemical sensing for polycyclic aromatic amines based on a novel core–shell multiwalled carbon nanotubes@ graphene oxide nanoribbons heterostructure

Being awfully harmful to the environment and human health, the qualitative and quantitative determinations of polycyclic aromatic amines (PAAs) are of great significance. In this paper, a novel core–shell heterostructure of multiwalled carbon nanotubes (MWCNTs) as the core and graphene oxide nanoribbons (GONRs) as the shell (MWCNTs@GONRs) was produced from longitudinal partially unzipping of MWCNTs side walls using a simple wet chemical strategy and applied for electrochemical determination of three kinds of PAAs (1-aminopyrene (1-AP), 1-aminonaphthalene and 3,3′-diaminobiphenyl). Scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis and electrochemical methods were used to characterize the as-prepared MWCNTs@GONRs. Due to the synergistic effects from MWCNTs and GONRs, the oxidation currents of PAAs at the MWCNTs@GONRs modified glassy carbon (GC) electrode are much higher than that at the MWCNTs/GC, graphene/GC and bare GC electrodes. 1-AP was used as the representative analyte to demonstrate the sensing performance of the MWCNTs@GONRs/GC electrode, and the proposed modified electrode has a linear response range of 8.0–500.0 nM with a detection limit of 1.5 nM towards 1-AP.     

金纳米粒子/碳纳米管修饰电极对4 壬基酚的电催化氧化及检测研究

制备了金纳米粒子/碳纳米管修饰玻碳电极(AuNPs-CNTs/GCE),采用循环伏安法和线性扫描伏安法研究了4-壬基酚在修饰电极上的电化学行为,并建立了一种灵敏简便地检测4-壬基酚的电化学方法。优化了pH值、扫描速率、富集时间等测定参数,并计算出pH值与氧化峰电压、扫描速率与氧化峰电流之间的数量关系。在pH 10.0的BR缓冲溶液中,4-壬基酚在AuNPs-CNTs/GCE上出现灵敏的氧化峰,氧化电位为0.51 V。与裸玻碳电极(GCE)和单一碳纳米管修饰电极(CNTs/GCE)相比,AuNPs-CNTs/GCE明显提高了4-壬基酚的氧化电流。在优化实验条件下,4-壬基酚的浓度分别在0.05～4μmol/L和6～14μmol/L范围内与氧化峰电流呈良好的线性关系,检出限为0.023μmol/L,对于实际样品测定的回收率为95%～104%。该修饰电极具有良好的重现性和稳定性,可用于环境样品中4-壬基酚的直接检测。     

Use of a Boron-Doped Diamond Electrode for Amperometric Assay of Bromide and Iodide Ions

The electrochemical assay of bromide and iodide ions at boron-doped diamond (BDD) electrode was investigated by cyclic voltammetry (CV) and chronoamperometry (CA). Comparison experiments were carried out using a glassy carbon (GC) electrode. The BDD electrode exhibited well-resolved and irreversible reduction voltammograms, while the GC electrode provided only an ill-defined response. Cyclic voltammetric signals at BDD electrode for 10 mM Br⁻ and I⁻ were observed at 561 and 125 mV vs. SCE; the values shifted negatively for 228.7 and 187.5 mV, respectively, compared to those at GC electrode. It was also found that the peak current of Br⁻ and I⁻ was in direct proportion to the scan rate, which is indicative of a surface confined reduction process. Sensitive amperometric responses for Br⁻ and I⁻ were obtained covering the linear ranges 0.666 μM–1 mM and 13.3 nM–1 mM, respectively, and their detection limits were 0.53 μM and 1.67 nM, respectively, under the optimum pH and applied potential. The amperometric response was very reproducible and stable with satisfactory recovery results. __________ From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 11, 2005, pp. 1193–1199. Original English Text Copyright ? 2005 by Jing Wu, Xiaoli Li, Cunxi Lei, Xumei Wu, Guoli Shen, and Rugin Yu. This article was submitted by the authors in English.     

聚多巴胺/多壁碳纳米管/玻璃碳电极上多巴胺的电分析

基于多巴胺（DA）在多壁碳纳米管（MWCNTs）修饰玻璃碳（GC）电极上的电聚合,制得聚多巴胺(PDA)/MWCNTs/GC电极,并对该修饰电极进行了电化学阻抗谱 (EIS)和循环伏安法(CV)表征。 在该修饰电极上,DA呈现良好的电化学行为。在pH=7.4磷酸缓冲溶液中其氧化电流显著高于在裸电极上的响应,且能有效地抑制2.0 mmol/L抗坏血酸(AA)或K4Fe(CN)6的直接电化学响应,表明MWCNTs可增敏信号,且阳离子选择透过性PDA膜可抑制阴离子的电化学干扰。 采用CV实验检测DA,DA氧化的半微分伏安峰高(ipa-sd)与多巴胺浓度在0.08～1.76 μmol/L范围内呈线性关系,在无抗坏血酸和有0.5 mmol/L抗坏血酸共存时的线性回归方程分别为ipa-sd(μA/s1/2)=0.107+0.405c(μmol/L)（r2=0.986）和ipa-sd(μA/s1/2)=0.628+0.649c(μmol/L)(r2=0.992),检测限均为8.0×10-8 mol/L(S/N=3)。 该法用于盐酸多巴胺注射液中多巴胺的快速测定,结果满意。     

Electrochemical sensor for naphthols based on gold nanoparticles/hollow nitrogen-doped carbon microsphere hybrids functionalized with SH-β-cyclodextrin

Due to awfully harmful to the environment and human health, the qualitative and quantitative determinations of naphthols [1-naphthol (1-NAP) and 2-naphthol (2-NAP)] are of great significance and receive great attention. In this paper, gold nanoparticles (AuNPs)/hollow nitrogen-doped carbon microspheres (HNCMS) hybrids (AuNPs/HNCMS) were prepared and functionalized with thiolated-β-cyclodextrin (HS-β-CD) for the first time, and then applied successfully in sensitive and simultaneous electrochemical detection of naphthols. The results show that the oxidation peak currents of naphthols obtained on the HS-β-CD/AuNPs/HNCMS modified glassy carbon (GC) electrode are much higher than that on the AuNPs/HNCMS/GC, HNCMS/GC and bare GC electrodes. Additionally, compared with other electrochemical sensors developed previously, the proposed electrode results in improved detection limits of about four times for 1-NAP (1.0 nM) and two orders of magnitude for 2-NAP (1.2 nM). The linear response ranges of both 1-NAP and 2-NAP are 2–150 nM.     

Ultrasensitive and Selective Detection of Cd(II) Using ZnSe‐Xanthan Gum Complex/CNT Modified Electrodes

This work describes for the first time the employment of water soluble GSH‐ZnSe QDs stabilized by XG and MWCNT for electrode modification in the detection of Cd ions in a highly sensitive and selective manner resulting from the unique structure and surface chemistry of the used QDs. The surface of a glassy carbon (GC) electrode was modified through casting a thin layer of multiwalled carbon nanotubes (MWCNT) followed by a complex layer of ZnSe quantum dots (QDs) stabilized by xanthan gum (XG). Due to the electrocatalytic properties of MWCNT and electroanalytical performance of ZnSe‐XG complex, the new modified electrode significantly improves the sensitivity and selectivity of Cd(II) detection and exhibits enhanced performance in comparison to bare GC, ZnSe/GC and ZnSe/MWCNT/GC electrodes. Strong interactions between ZnSe QDs and XG resulting from hydrogen bonding and complexing association led to stabilization of ZnSe QDs and higher affinity towards Cd(II) ions adsorption compared to a ZnSe QDs film alone. The modified electrode showed linear response in a wide concentration range from 100 nM to 5 μM (R²=0.9967) along with a high sensitivity of 156.6 nA ⋅ mol⁻¹ ⋅ L⁻¹ and a low detection limit of 20 nM. The electrode shows high selectivity to Cd with negligible interference from other metal ions and salts.     

Electrochemical Sensor for Arabinose Based on Template‐free Pb/Cd Branched Nanorods on Glassy Carbon Electrode

In this paper, the electrochemical behavior of glassy carbon electrodes modified with Cd/Pb (GC/Cd/Pb) branched nanorodes (NRs) was studied using cyclic voltammetry technique. The obtained results showed that the branched nanorods of Cd/Pb can be readily prepared without any templates. The modified electrode was characterized using scanning electron microscopy (SEM), energy dispersive X‐ray analysis (EDAX) and electrochemical impedance spectroscopy (EIS) techniques. The electrocatalytic behavior of GC/Cd/Pb electrode showed an increase in oxidation signal of arabinose by increasing its concentration. The catalytic current was linearly related to arabinose concentration in the range of 0.6 to 6.8 μM with a limit of detection 0.2 μM.     

3,4,9,10-Perylene Tetracarboxylic Acid Noncovalently Modified Multiwalled Carbon Nanotubes: Synthesis,Characterization, and Application for Electrochemical Determination of 2-Aminonaphthalene

Carbon nanotubes have been intensively studied for their diverse applications but are insoluble in water. In this paper, 3,4,9,10-perylene tetracarboxylic acid noncovalently modified multiwalled carbon nanotubes were prepared by a facile approach and applied successfully for electrochemical determination of 2-aminonaphthalene. Infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and electrochemical methods were used to characterize the hybridized nanotubes. The results reveal that the hybrids exhibit high dispersibility in water, and a glassy carbon electrode modified by the hybrids displayed a higher electrochemical response toward 2-aminonaphthalene than bare glassy carbon and multiwalled carbon nanotube–glassy carbon electrodes with a linear dynamic range of 15.0–500.0 nM and a detection limit of 4.5 nM. The modified hybrid electrode was successfully applied for the determination of 2-aminonaphthalene in water.     

Sensitive Electrochemical Detection of Bisphenol A Using Molybdenum Disulfide/Au Nanorod Composites Modified Glassy Carbon Electrode

Bisphenol A, an important compound that is classified as an environmental hormone, has been proven to have harmful effects on human health and ecology. A molybdenum disulfide/Au nanorod‐modified glassy carbon electrode was prepared as an electrochemical sensor for the detection of bisphenol A using a simple and convenient approach. UV–Vis spectrophotometry and transmission electron microscopy were employed to characterize the composite. The electrochemical behavior of bisphenol A at the modified electrode was investigated via differential pulse voltammetry and cyclic voltammetry. The results show that bisphenol A exhibits a good electrochemical signal at the modified electrode under optimized conditions, and a good linear relationship was observed between the bisphenol A concentration and peak current within the range of 0.01–50 μM, with a detection limit of 3.4 nM. Furthermore, the fabricated electrodes showed good anti‐interference, reproducibility and stability. The proposed electrochemical method was successfully applied for the detection of bisphenol A in milk and water samples, and its potential for applications in pollutant detection was demonstrated.