共查询到20条相似文献,搜索用时 31 毫秒
1.
The object of this study is the comparison of two methods for the quantitative analysis of anions in aqueous samples: ion chromatography with conductimetric detection, and capillary zone electrophoresis with indirect photometric detection. The comparison includes modeling of experimental peaks as well as statistical validation criteria according to the recommendations of the International Conference on Harmonisation. In ion chromatography, peak shapes are Gaussian or exponentially modified Gaussian, and the number of theoretical plates calculated using the appropriate mathematical relations correspond well to those obtained from statistical moments. Peaks in capillary electrophoresis, however, do not follow the same models. A different model, treating the peaks as right angle triangles, has been studied. Equations corresponding to this model permit a good estimation of plate numbers. The statistical validation of these methods includes detection limits, linearity, accuracy and precision. Overall, ion chromatography yields better validation results than capillary electrophoresis. In the latter method the injection mode plays an important role, with voltage injection giving lower detection limits than hydrodynamic injection. 相似文献
2.
Capillary electrophoresis techniques offer high plate numbers and are highly suited for the efficient separations of a wide variety of chemical components in diverse matrices. Because of the small capillary and detection cell dimensions, together with the minute volumes of samples to be injected, sensitive detection schemes based on different physicochemical principles are being developed. One logical approach to increased sensitivity in capillary electrophoresis detection has been the development of chemiluminescence-based detectors. The development of on-line ultrasensitive chemiluminescence detection (referred to the concentration detection limit of nM order of magnitude or mass detection limit of amol order of magnitude) in capillary electrophoresis system is reviewed. The applications and limitations of the current detection methodology are briefly considered and future prospects for the development are discussed. 相似文献
3.
Distortion of the starting zone upon its electrophoretic migration toward the detection window gives rise to both symmetrical zones caused by diffusion, sedimentation in the horizontal section of the capillary and the curvature of the capillary, and asymmetrical zones having their origin in Joule heating, sedimentation in the vertical section of the capillary, pH and conductivity differences between the sample zone and the surrounding buffer, solute adsorption onto the capillary wall, and association-dissociation of complexes between the analyte and a buffer constituent or between analytes. Interestingly and importantly a theoretical study shows that moderate pH and conductivity differences as well as adsorption and all of the above interactions when they are characterized by a fast on/off kinetics do not increase the zone broadening (or only slightly), because the sharpening of one boundary of the zone is about the same as the broadening of the other boundary. In addition the peak symmetry caused by a conductivity difference is in most experiments counteracted by a pH difference. The experimentally determined plate numbers in the absence of electroosmosis exceeded one million per meter in some experiments (Part II). These plate numbers are among the highest reported [Z. Zhao, A. Malik, M.L. Lee, Anal. Chem. 65 (1993) 2747; M. Gilges, K. Kleemiss, G. Schomburg, Anal. Chem. 66 (1994) 2038; H. Wan, M. Ohman, L.G. Blomberg, J. Chromatogr. A 924 (2001) 591 (plate numbers determined in the presence of electroosmosis may be higher, although the width of the zone in the capillary may be larger) [p. 680 in S. Hjertén, Electrophoresis 11 (1990) 665]). Capillary free zone electrophoresis is perhaps the only separation method, which, under optimum conditions, gives a plate number not far from the theoretical limit. A prerequisite for this high performance is that the polyacrylamide-coated capillary is washed with 2 M HCl between the runs and stored in water over night (Part II). The difference between the experimentally determined total variance and the sum of the calculated variances originating from the width of the starting zone, longitudinal diffusion, Joule heating, sedimentation in the vertical section of the capillary, curvature of the capillary (i.e., the sum of all other variances) was in our most successful experiments about 28% of the variance of diffusion. The zone broadening, 2sigma, caused by diffusion was estimated at 0.77 mm. The total zone width (2sigma) calculated from the experimentally determined plate number was as small as 1 mm when the migration distance was 40 cm. Accordingly, the only efficient way to reduce drastically the total zone width is to decrease the analysis time and, thereby, the diffusional broadening. An important finding was that the variance originating from the loops of the capillary is not always negligible in high-performance runs. Therefore, one should employ straight capillaries and avoid CE apparatus with cartridges that require a strong curvature of the capillary, common in most commercial instruments. Mathematical formulas have been derived for the sedimentation of the solute zone, the enrichment factor, and the migration time in experiments where the solute is dissolved in a dilute running buffer. This zone sharpening method gave very narrow starting zones (0.04-0.4 mm). However, upon high dilution of the buffer the enrichment becomes so strong that part of the sample zone probably sediments out of the capillary; the almost inevitable change in pH may decrease the mobility of the proteins and, thus, cause the enrichment factor to become still lower than expected. Diffusion of the protein in the very narrow starting zone (located close to the tip of the capillary) and sometimes the thermal expansion of the buffer in the capillary contributes to additional loss of protein in the enrichment step. In some buffers, the interaction between the protein and the buffer constituents is so slow that the peaks become broad. Therefore, different types of buffers should be tested when high resolution is required. The relation sigma2 (the variance of the interaction between a protein and the buffer constituents) = constant x u (the mobility) seems to be valid for all proteins in the applied sample, at least when they have similar molecular masses. To facilitate the understanding of the progress of a free zone electrophoresis experiment, we have discussed in simple terms how the concentrations of the background electrolytes become rearranged during a run and why the difference between the mobilities of the proteins and the mobilities of the background electrolyte determines whether a peak exhibits fronting or tailing. A theoretical analysis of zone broadening in capillary zone electrophoresis, chromatography, and electrochromatography indicates that electrochromatography in homogeneous gels might be the only chromatographic technique which can compete in performance with free electrophoresis. Using an equation, valid not only for electrophoresis, but also for chromatography and centrifugation, the mobility of a concentration boundary has been calculated for the first time and was, as expected, low. Equations based on the Kohlrausch regulating function do not permit such calculations. Another regulating function (the H function) and some of its characteristics are briefly discussed. The theoretical discussions in this paper and the experimental studies in Part II show that high-performance electrophoresis deserves its prefix when the runs are designed to give minimum zone broadening. Some guidelines are given to facilitate this optimization. The plate numbers are so high that the resolution cannot be increased by more than 30% even if they approach the theoretically maximum values. 相似文献
4.
Norbert Burggraf Andreas Manz Carlo S. Effenhauser Elisabeth Verpoorte Nico F. de Rooij H. Michael Widmer 《Journal of separation science》1993,16(10):594-596
A novel concept for repeated column switching in capillary electrophoresis is presented. Theoretical considerations predict high plate numbers per volt. Using micromachining techniques, a planar glass structure has been fabricated, which contains four capillaries of 20 mm length arranged in a square. Laser fluorescence detection gave a cycle time of 70 s for 2.5 kV applied. After five cycles a theoretical plate number of 40,000 was reached. 相似文献
5.
A new sensitive chemiluminescent detection method for capillary electrophoresis is described. Underivatized amines and amino acids were detected following capillary electrophoresis separation by their chemiluminescent reaction with Ru(bpy)(3)(3+) generated in situ at 35 mum carbon fibers. Detection limits for triethylamine and proline were 5 and 3 fmol, respectively at a SNR of three. The noise limiting the detectability of separated analytes was determined to exist at the level of the dark noise limit of the PMT used for these studies and additional noise reduction strategies are expected to improve the quantitative aspects of the method. Theoretical plate numbers for proline were approximately 20 000. End column addition of Ru(bpy)(3)(2+) coupled with in situ generation of Ru(bpy)(3)(3+), has been shown to be compatible with the nanoliter elution volumes characteristic of capillary electrophoresis. 相似文献
6.
Andreas Manz Elisabeth Verpoorte Carlo S. Effenhauser Norbert Burggraf Daniel E. Raymond H. Michael Widmer 《Fresenius' Journal of Analytical Chemistry》1994,348(8-9):567-571
Miniaturization of separation columns implies equally reduced volumes of injectors, detectors and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron sized structures such as channels. This is demonstrated with three examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical pathlength cell despite its volume of 4 nL. A capillary electrophoresis device allows for integrated injections of 100 pL samples, for efficiencies of 70 000 to 160 000 theoretical plates in 10 to 20 seconds, and for external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm. A system for synchronized cyclic capillary electrophoresis is also presented in which plate numbers per volt can be dramatically increased. 相似文献
7.
New peak broadening parameter for the characterization of separation capability in capillary electrophoresis
下载免费PDF全文
![点击此处可从《Journal of separation science》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The influence of separation conditions on peak broadening is usually estimated by the number of theoretical plates. Using the data available in literature and experimental data, it is shown that in pressure‐assisted capillary electrophoresis the plate number is not directly related to the separation capability of conditions used. The experiments at different electrolyte flow velocities demonstrate that a higher plate number (the best separation efficiency) can be obtained with a lower peak resolution. Since ions are separated by electrophoresis due to the difference in electrophoretic mobilities, the peak width in terms of electrophoretic mobility is suggested as a new peak broadening parameter describing the separation capability of the conditions used. The parameter can be calculated using the tailing factor and the temporal peak width at 5% of the peak height. A simple equation for the resolution calculation is derived using the parameter. The advantage of the peak width in terms of mobility over other parameters is shown. The new parameter is recommended to be used not only in pressure‐assisted capillary electrophoresis but also in general capillary electrophoresis when in a number of runs the virtual separative migration distance and separation capability of the conditions used change widely. 相似文献
8.
Kenji Uchiyama Manabu Tokeshi Yoshikuni Kikutani Akihiko Hattori Takehiko Kitamori 《Analytical sciences》2005,21(1):49-52
This paper presents a capillary-to-microchip connection, which can be used as an interface for coupling capillary electrophoresis (CE) with a thermal lens microscope (TLM). It is difficult to directly apply TLM to samples in a capillary with a curved surface, and such an interface chip at the end of a CE separation column is needed for reliable TLM measurements. The dependence of the TLM signal intensity on the TLM detection point in the interface chip and the dependence of the theoretical plate number of CE separation on the channel dimensions of the interface chip were investigated and optimized with a mixture of 4-dimethylaminoazobenze-4'-sulfonyl (DABSYL)-derivatized amino acids (glycine, alanine, methionine, and proline) as a model sample. By using an optimized interface chip, theoretical plate numbers of DABSYL-glycine, -methionine, -alanine, and -proline were obtained to be 104000, 95000, 104000, and 95000, respectively. 相似文献
9.
The separation of acidic and basic model proteins was studied in capillary free zone electrophoresis in a polyacrylamide-coated, electroosmosis-free capillary at pH below their isoelectric points (pI) using various buffers at pH 2.7-4.8 with UV detection at 200 nm. The separation performance was significantly dependent on the coating quality, which may even differ within the same batch of capillaries. In addition, a washing step with 2 M HCl and the storage of the capillary in distilled water was essential for the performance. For high efficiency and resolution the choice of buffer constituents was extremely important which is discussed in quantitative terms in Part I. The most promising buffers were ammonium acetate and ammonium hydroxyacetate at pH 4 (ionic strengths: 0.12 and 0.15 M, respectively) with plate numbers up to 1,700,000 plates/m, corresponding to a zone width (2sigma) of only 1 mm in a capillary with 40 cm effective length, when the injected samples were dissolved in a 10-fold diluted background electrolyte (BGE), a zone even narrower than those obtained in polyacrylamide gel electrophoresis, the characteristic feature of which is remarkably thin zones. In the experiment giving this plate number, the calculated variance for longitudinal diffusion was larger than all the other calculated variances (those for the width of the starting zone, Joule heating, sedimentation and the curvature of the capillary). Interestingly, the effect of capillary curvature was significant. In addition, the sum of all other imaginable variances (corresponding to various types of slow on/off kinetics and hyper-sharp peaks) was in the most successful experiments only 28-50% of the variance for longitudinal diffusion. One hundred- to two hundred-fold dilution of the BGE improved the detection limits and provided high precision in both migration times and peak areas with ammonium hydroxyacetate and ammonium acetate as background electrolytes. However, that high dilution increased the variance 140-400% for these buffers, respectively, at least partly due to conductivity or pH differences between the sample and buffer zones (hyper-sharp peaks). Sedimentation of the enriched sample, a factor that has not previously been treated theoretically or experimentally, was probably another reason for our finding that peak heights did not increase when the sample was dissolved in a buffer diluted more than 200-fold, although pH changes and in some cases thermal expansion in the capillary also may contribute. Loss of protein may occur at the ionic strength 0.01 and lower due to precipitation. Limits of detection were in the range 4-17 pmol of proteins with ammonium acetate as BGE. No indication of denaturation of proteins at pH 4 was observed. However, the separation performance at pH 3 was not satisfactory and loss of proteins was observed, possibly indicating such problems. The protein mobilities decreased unexpectedly from pH 4 to 3--a further indication of conformation changes. 相似文献
10.
Polyacrylamide gel electrophoresis (PAGE) is used frequently for isolation and purification of DNA fragments. In the present study, DNA fragments extracted from polyacrylamide gels showed significant band broadening in capillary electrophoresis (CE). A pHY300PLK (a shuttle vector functioning in Escherichia coli and Bacillus subtilis) marker, which contained nine fragments ranging from 80 to 4870 bp, was separated by PAGE, and each fragment was isolated by phenol/chloroform extraction and ethanol precipitation. After extraction from the polyacrylamide gel, the peaks of the isolated DNA fragments exhibited band broadening in CE, where a linear poly(ethylene oxide) was used as a sieving matrix. The theoretical plate numbers of the DNA fragments contained in the pHY300PLK marker were >106 for all the fragments before extraction. However, the DNA fragments extracted from the polyacrylamide gel showed decreased theoretical plate numbers (5–20 times smaller). The degradation of the theoretical plate number was significant for middle sizes of the DNA fragments ranging from 489 to 1360 bp, whereas the largest and smallest fragments (80 and 4870 bp) had no obvious influence. The band broadening was attributed to contamination of the DNA fragments by polyacrylamide fibers during the separation and extraction process. 相似文献
11.
A background electrolyte for capillary electrophoresis containing tris(-hydroxymethyl) aminomethane (THAM) and ethanesulfonic acid (ESA) gives excellent efficiency for separation of drug cations with actual theoretical plate numbers as high as 300,000. However, the analyte cations often elute too quickly and consequently offer only a narrow window for separation. The best way to correct this is to induce a reverse electroosmotic flow (EOF) that will spread out the peaks by slowing their migration rates, but this has always been difficult to accomplish in a controlled manner. A new method for producing a variable EOF is described in which a low variable concentration of tributylammonium- or triethylammonium ESA is added to the BGE. The additive equilibrates with the capillary wall to give it a positive charge and thereby produce a controlled opposing EOF. Excellent separations of complex drug mixtures were obtained by this method. 相似文献
12.
Yan Man XueFei Lv Javed Iqbal Fuchao Jia Peng Xiao Murtaza Hasan Qin Li Rongji Dai Lina Geng Hong Qing Yulin Deng 《Chromatographia》2013,76(1-2):59-65
A novel and simple coating method was developed by coating bovine serum albumin (BSA) onto the inner surface of a fused-silica capillary, to avoid the adsorption of analytes during CE. The advantage presented here was that the coating process is more simple, fast, stable, and reproducible. The coated capillary avoided the adsorption of analytes onto the inner surface of a fused-silica capillary and might be a promising candidate for separation of complex biological samples with further development. Meanwhile, the efficiencies of the coated capillary were evaluated by EOF, chromatographic peak shape, and theoretical plate number (N m?1) of RNase A. The optimal coating conditions were obtained from the results. The pH value of coating buffer PB was 4.2, the standing time was 12 h at 4 °C, and the coating concentration of BSA was 1.5 mg mL?1. The stability of the coating on the inner wall of the capillary and the reproducibility of the coated capillaries were good. The theoretical plate number values of RNase A were over 1.3 × 105 (N m?1) in the coated capillary. After successive electrophoresis for 48 h using the coated capillary, the RSD values of EOF and the theoretical plate number were 4.14 % and 9.14 %, respectively. In addition, the RSD values of EOF and the theoretical plate number (N m?1) in the coated capillaries were 13.19 % and 8.96 %, respectively. Finally, the coated capillary was successfully applied to separate the mixture of four basic proteins (RNase A, lysozyme, trypsin and myoglobin). 相似文献
13.
Introduced in this article is fabrication of an integrated capillary for the applications of electrochemical detection in capillary electrophoresis. The separation section, voltage decoupler, and working electrode were composed into a single section of capillary. The porous decoupler was constructed by HF etching till the thickness of the capillary wall less than 20 μm. The working electrode was prepared by sputtering Au-films on the outlet of the capillary. The integration of the separation capillary with a complete detection assembly improves the convenience for the routine application of electrochemical measurements in capillary electrophoresis. For a 100-μm-i.d. capillary, the theoretical plate number of catechol and the migration time reproducibility can reach 120,000 and 1.9% RSD, respectively. The linear range exceeds 3 order of magnitude and the detection limit is lower than 0.65 μM. 相似文献
14.
在石英单晶表面制成矩矩截面毛细管柱中进行电泳实验。由于矩形柱比圆形柱有更大散热侧面积且石英单晶的导热性能远无于熔融石英,所以可施加较高的场强,不仅提高了柱效,而且缩矩了分离时间。两相交的通道之间形成自然连接,可实现二维分离,并消除死体积。 相似文献
15.
A simple capillary zone electrophoresis method has been developed for the separation of polyethylene glycols (PEGs) consisting of differing amounts of polymers with different monomer numbers up to an average molecular mass of 1500. To provide both charge and detectability, the analytes were derivatized with phthalic anhydride according to a conventional method and a newly developed microwave-assisted method. While obtaining nearly equal amounts of single and double esterificated PEGs with the conventional method, the fraction of single derivatized PEGs is considerably reduced by microwave-assisted reaction. In order to compare the capillary zone electrophoresis results, an HPLC method with evaporative light scattering detection has been established. This method was successfully applied to the analysis of underivatized PEG 400, 1000 and 1500. 相似文献
16.
The purpose of this study is to develop a method for precise evaluation of band broadening in capillary electrophoresis. A capillary electrophoresis system with on-column twin detectors is constructed. Back-and-forth electrophoresis permits zones to make a round trip between the twin detectors placed at distant positions on the capillary. The system is capable of eliminating extra-column effects and discriminating between reversible and irreversible band-broadening mechanisms. 相似文献
17.
CGE is a well-established separation technique for the analysis of biologically important molecules such as nucleic acids. The inherent high resolving power, rapid analysis times, excellent detection sensitivity, and quantification capabilities makes this method favorable compared to conventional manual polyacrylamide and agarose slab gel electrophoresis techniques. In this paper we introduce a novel single-channel capillary gel electrophoresis system with LED-induced fluorescence detection also utilizing a compact pen-shaped capillary cartridge design for automatic analysis of samples from a 96-well plate. To evaluate the suitability of the system, 1000 genomic DNA(gDNA) samples were analyzed in gel filled capillaries and detected by the microball ended excitation and emission optical fiber based LED-induced fluorescence detection system. Excellent migration time reproducibility of RSD <0.75% was obtained over the course of 1000 runs. The system rapidly distinguished between intact and degraded gDNA samples, therefore provided important information if they could be used for downstream quantitative PCR processing where high-quality intact gDNA was key. We envision that this novel system design will rapidly find new applications in both research and clinical diagnostic laboratories as a highly sensitive and easy to use bio-analytical approach. 相似文献
18.
H. A. Claessens M. J. J. Hetem P. A. Leclercq C. A. Cramers 《Journal of separation science》1988,11(2):176-180
In comparison with conventionally packed HPLC columns, from a theoretical point of view, open capillary liquid chromatography (OTLC) systems offer a number of advantages like high plate numbers and short analysis times. On the other hand, drastic changes have to be made to the instrumentation. In particular, the contribution to band broadening by the chromatographic equipment must be considerably reduced. In the present study an OTLC system was developed and evaluated, which yields satisfactory results for 26 μm i. d. columns. The determination of the contribution of the chromatographic equipment to the total band broadening is discussed. 相似文献
19.
A large-volume sample injection (> 5 microL) with an extremely high theoretical plate number (N > 10(7)) was achieved when the sweeping-MEKC mode and a coupled-capillary (100 - 50 microm i.d.) were simultaneously used in a capillary electrophoresis (CE) separation. A low-cost and compact violet-LED ( approximately 2 mW) was used as the fluorescence excitation source. As a result, the theoretical plate numbers of the detected peaks (two model compounds: naphthalene-2,3-dicarboxaldehyde derivatized-dopamine and -norepinephrine) were 1.0 x 10(7) and 7.4 x 10(6), respectively. The limits of detection (at S/N = 3) of these were determined to be 2.8 x 10(-10) M (92 ppt) and 2.3 x 10(-10) M (83 ppt), respectively. 相似文献
20.
提出了一种基于芯片-毛细管复合装置的紫外检测-微流控芯片毛细管电泳分析系统.采用小死体积的耦合技术实现了石英毛细管与“十”字通道型微流控玻璃芯片的耦合.本系统的紫外检测灵敏度与商品化毛细管电泳仪相当.采用夹流进样方式,达到较高的进样重现性,2mmol/L苯甲酸的峰高相对标准偏差(RSD)为1.5%(n=11).可用于复方磺胺甲唑片剂的两种有效成分的快速分离. 相似文献