Selective Sensing of Fe3+ and Al3+ Ions and Detection of 2,4,6‐Trinitrophenol by a Water‐Stable Terbium‐Based Metal–Organic Framework

A water‐stable luminescent terbium‐based metal–organic framework (MOF), {[Tb(L₁)_1.5(H₂O)] ? 3 H₂O}_n (Tb‐MOF), with rod‐shaped secondary building units (SBUs) and honeycomb‐type tubular channels has been synthesized and structurally characterized by single‐crystal X‐ray diffraction. The high green emission intensity and the microporous nature of the Tb‐MOF indicate that it can potentially be used as a luminescent sensor. In this work, we show that Tb‐MOF can selectively sense Fe³⁺ and Al³⁺ ions from mixed metal ions in water through different detection mechanisms. In addition, it also exhibits high sensitivity for 2,4,6‐trinitrophenol (TNP) in the presence of other nitro aromatic compounds in aqueous solution by luminescence quenching experiments.     

A Multi‐responsive Regenerable Europium–Organic Framework Luminescent Sensor for Fe3+, CrVI Anions,and Picric Acid

A novel luminescent microporous lanthanide metal–organic framework (Ln‐MOF) based on a urea‐containing ligand has been successfully assembled. Structural analysis revealed that the framework features two types of 1D channels, with urea N?H bonds projecting into the pores. Luminescence studies have revealed that the Ln‐MOF exhibits high sensitivity, good selectivity, and a fast luminescence quenching response towards Fe³⁺, Cr^VI anions, and picric acid. In particular, in the detection of Cr₂O₇^2? and picric acid, the Ln‐MOF can be simply and quickly regenerated, thus exhibiting excellent recyclability. To the best of our knowledge, this is the first example of a multi‐responsive luminescent Ln‐MOF sensor for Fe³⁺, Cr^VI anions, and picric acid based on a urea derivative. This Ln‐MOF may potentially be used as a multi‐responsive regenerable luminescent sensor for the quantitative detection of toxic and harmful substances.     

A Metal–Organic Framework Containing Unusual Eight‐Connected Zr–Oxo Secondary Building Units and Orthogonal Carboxylic Acids for Ultra‐sensitive Metal Detection

Two metal–organic frameworks (MOFs) with Zr–oxo secondary building units (SBUs) were prepared by using p,p′‐terphenyldicarboxylate (TPDC) bridging ligands pre‐functionalized with orthogonal succinic acid (MOF‐ 1 ) and maleic acid groups (MOF‐ 2 ). Single‐crystal X‐ray structure analysis of MOF‐ 1 provides the first direct evidence for eight‐connected SBUs in UiO‐type MOFs. In contrast, MOF‐ 2 contains twelve‐connected SBUs as seen in the traditional UiO MOF topology. These structural assignments were confirmed by extended X‐ray absorption fine structure (EXAFS) analysis. The highly porous MOF‐ 1 is an excellent fluorescence sensor for metal ions with the detection limit of <0.5 ppb for Mn²⁺and three to four orders of magnitude greater sensitivity for metal ions than previously reported luminescent MOFs.     

Well‐Defined Metal–Organic Framework Hollow Nanocages

Metal–organic frameworks (MOFs) have demonstrated great potentials in a variety of important applications. To enhance the inherent properties and endow materials with multifunctionality, the rational design and synthesis of MOFs with nanoscale porosity and hollow feature is highly desired and remains a great challenge. In this work, the formation of a series of well‐defined MOF (MOF‐5, Fe^II‐MOF‐5, Fe^III‐MOF‐5) hollow nanocages by a facile solvothermal method, without any additional supporting template is reported. A surface‐energy‐driven mechanism may be responsible for the formation of hollow nanocages. The addition of pre‐synthesized poly(vinylpyrrolidone)‐ (PVP) capped noble‐metal nanoparticles into the synthetic system of MOF hollow nanocages yields the yolk–shell noble metal@MOF nanostructures. The present strategy to fabricate hollow and yolk–shell nanostructures is expected to open up exciting opportunities for developing a novel class of inorganic–organic hybrid functional nanomaterials.     

Air‐Free Synthesis of a Ferrous Metal‐Organic Framework Featuring HKUST‐1 Structure and its Mössbauer Spectrum

Single crystals of the Fe^II metal‐organic framework (MOF) with 1,3,5‐benzenetricarboxylate (BTC) as a linker were solvothermally obtained under air‐free conditions. X‐ray diffraction analysis of the crystals demonstrated a structure for Fe^II‐MOF analogous to that of [Cu₃(BTC)₂] (HKUST‐1). Unlike HKUST‐1, however, the Fe^II‐MOF did not retain permanent porosity after exchange of guest molecules. The Mössbauer spectrum of the Fe^II‐MOF was recorded at 80 K in zero field yielding an apparent quadrupole splitting of ΔE_Q = 2.43 mm · s^–1, and an isomer shift of δ = 1.20 mm · s^–1, consistent with high‐spin central iron(II) atoms. Air exposure of the Fe^II‐MOF was found to result in oxidation of the metal atoms to afford Fe^III. These results demonstrate that Fe^II‐based MOFs can be prepared in similar fashion to the [Cu₃(BTC)₂], but that they lack permanent porosity when degassed.     

A Water‐Stable Terbium(III)–Organic Framework as a Chemosensor for Inorganic Ions,Nitro‐Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro‐compounds, excessive Fe³⁺ and MnO₄^?, is crucial for human health and environmental protection. Here, a new terbium(III)–organic framework, namely [Tb(TATAB)(H₂O)]?2H₂O ( Tb‐MOF , H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐m‐aminobenzoic acid), was assembled and characterized. The Tb‐MOF exhibits a water‐stable 3D bnn framework. Due to the existence of competitive absorption, Tb‐MOF has a high selectivity for detecting Fe³⁺, MnO₄^?, 4‐nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb‐MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III‐based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro‐compounds, and antibiotics simultaneously.     

A stable pillared metal–organic framework constructed by H4TCPP ligand as luminescent sensor for selective detection of TNP and Fe3+ ions

A novel luminescent metal–organic framework ( Zn‐TCPP/BPY ) with pillared structure based on 2,3,5,6‐tetrakis(4‐carboxyphenyl)pyrazine (H₄TCPP) and 4,4′‐bipyridine (BPY) has been designed and synthesized through a solvothermal reaction. The [Zn₂(COO)₄] paddlewheel units are linked by TCPP^4? ligands to form two‐dimensional layers and further connected by BPY ligands as pillars to construct the twofold interpenetrating three‐dimensional framework. Interestingly, Zn‐TCPP/BPY possesses outstanding stability in organic solvents and water as well as maintains its structural rigidity in aqueous solutions of different pH values (3–12). After activation, Zn‐TCPP/BPY possesses permanent porosity with Brunauer–Emmett–Teller surface area of 630 m² g^–1. Remarkably, Zn‐TCPP/BPY displays excellent fluorescent property in virtue of the aggregation‐induced emission effect of the H₄TCPP ligand, which can be highly active and quenched by small amounts of 2,4,6‐trinitrophenol (TNP) and Fe³⁺ ions. Furthermore, the detection effect of Zn‐TCPP/BPY remains basically the same even after five cycles. The excellent stability, high sensitivity, and recyclability of Zn‐TCPP/BPY make it an outstanding chemical sensor for detecting TNP and Fe³⁺ ions.     

Sequential Transformation of Zirconium(IV)‐MOFs into Heterobimetallic MOFs Bearing Magnetic Anisotropic Cobalt(II) Centers

Heterometallic metal–organic frameworks (MOFs) allow the precise placement of various metals at atomic precision within a porous framework. This new level of control by MOFs promises fascinating advances in basic science and application. However, the rational design and synthesis of heterometallic MOFs remains a challenge due to the complexity of the heterometallic systems. Herein, we show that bimetallic MOFs with MX₂(INA)₄ moieties (INA=isonicotinate; M=Co²⁺ or Fe²⁺; X=OH^?, Cl^?, Br^?, I^?, NCS^?, or NCSe^?) can be generated by the sequential modification of a Zr‐based MOF. This multi‐step modification not only replaced the linear organic linker with a square planar MX₂(INA)₄ unit, but also altered the symmetry, unit cell, and topology of the parent structure. Single‐crystal to single‐crystal transformation is realized so that snapshots for transition process were captured by successive single‐crystal X‐ray diffraction. Furthermore, the installation of Co(NCS)₂(INA)₄ endows field‐induced slow magnetic relaxation property to the diamagnetic Zr‐MOF.     

Selective and Sensitive Aqueous‐Phase Detection of 2,4,6‐Trinitrophenol (TNP) by an Amine‐Functionalized Metal–Organic Framework

Highly selective and sensitive aqueous‐phase detection of nitro explosive 2,4,6‐trinitrophenol (TNP) by a hydrolytically stable 3D luminescent metal–organic framework is reported. The compound senses TNP exclusively even in the presence of other nitro‐compounds, with an unprecedented sensitivity in the MOF regime by means of strategic deployment of its free amine groups. Such an accurate sensing of TNP, widely recognized as a harmful environmental contaminant in water media, establishes this new strategic approach as one of the frontiers to tackle present‐day security and health concerns in a real‐time scenario.     

An Efficient Visible and Near‐Infrared (NIR) Emitting SmIII Metal–Organic Framework (Sm‐MOF) Sensitized by Excited‐State Intramolecular Proton Transfer (ESIPT) Ligand

We report herein an unprecedented example of a luminescent Sm^III metal–organic framework (Sm‐MOF), in which both the visible and near‐infrared (NIR) emissions of Sm³⁺ ions are able to be sensitized by an excited‐state intramolecular proton transfer (ESIPT) ligand. Due to the solvent‐mediated interchange between enol and keto excited states of the ligand and subsequent energy transfer rate to Sm³⁺ ions, the luminescent decay lifetime of the Sm‐MOF can be tuned in different solvent‐grinding systems.     

A novel nano‐size lanthanum metal–organic framework based on 5‐amino‐isophthalic acid and phenylenediamine: Photoluminescence study and sensing applications

In this paper, a novel lanthanum metal–organic framework La‐MOF was prepared via hydrothermal and reflux methods. The La‐MOF was achieved through the reaction of a 5‐amino‐isophthalic acid with 1, 2‐phenylenediamine and lanthanum chloride. The prepared La‐MOF structure was confirmed by XRD, mass spectrometry, IR, UV–Vis and elemental analysis, whereas the size, and morphology was examined by FE‐SEM/EDX and HR‐TEM. The results indicated that the La‐MOF prepared via both methods have the same structure and composition. Meanwhile, the MOF yield, reaction time, morphology, physiochemical and sensing properties were highly depended on the used preparation method. The photoluminescence (PL) study was carried out for the La‐MOF, and the results showed that La‐MOF exhibits strong emission at 558 nm after excitation at 369 nm. Moreover, the PL data indicating that the La‐MOF has highly selective sensing properties for iron (III) competing with different metal ions. The Stern‐Völmer graph shows a linear calibration curve which achieved over a concentration range 1.0–500 μM of Fe³⁺ with a correlation coefficient, detection, and quantitation limits 0.998, 1.35 μM and 4.08 μM, respectively. According to the remarkable quenching of the PL intensity of La‐MOF using various concentrations of Fe³⁺, it was successfully used as a sensor for Fe³⁺detecting in different water resources (pure and waste) samples. The quenching mechanism was studied and it has a dynamic type and due to efficient energy transfer between the La‐MOF and Fe³⁺.     

Highly Selective Detection of 2,4,6‐Trinitrophenol and Cu2+ Ions Based on a Fluorescent Cadmium–Pamoate Metal–Organic Framework

A luminescent cadmium–pamoate metal–organic framework, [Cd₂(PAM)₂(dpe)₂(H₂O)₂]?0.5(dpe) ( 1 ), has been synthesized under hydrothermal conditions by using π‐electron‐rich ligands 4,4′‐methylenebis(3‐hydroxy‐2‐naphthalenecarboxylic acid) (H₂PAM) and 1,2‐di(4‐pyridyl)ethylene (dpe). Its structure is composed of both mononuclear and dinuclear Cd^II building units, which are linked by the PAM and dpe ligands, resulting in a (4,8)‐connected 3D framework. The π‐conjugated dpe guests are located in a 1D channel of 1 . The strong emission of 1 could be quenched efficiently by trace amounts of 2,4,6‐trinitrophenol (TNP), even in the presence of other competing analogues such as 4‐nitrophenol, 2,6‐dinitrotoluene, 2,4‐dinitrotoluene, nitrobenzene, 1,3‐dinitrobenzene, hydroquinone, dimethylbenzene, and bromobenzene. The high sensitivity and selectivity of the fluorescence response of 1 to TNP shows that this framework could be used as an excellent sensor for identifying and quantifying TNP. In the same manner, 1 also exhibits superior selectivity and sensitivity towards Cu²⁺ compared with other metal ions such as Zn²⁺, Mn²⁺, Mg²⁺, K⁺, Na⁺, Ni²⁺, Co²⁺, and Ca²⁺. This is the first MOF that can serve as a dual functional fluorescent sensor for selectively detecting trace amounts of TNP and Cu²⁺.     

Intrinsic White‐Light‐Emitting Metal–Organic Frameworks with Structurally Deformable Secondary Building Units

The secondary building units in metal–organic frameworks (MOFs) are commonly well‐defined metal–oxo clusters or chains with very limited structural strain. Herein, the structurally deformable haloplumbate units that are often observed in organolead halide perovskites have been successfully incorporated into MOFs. The resultant materials are a rare class of isoreticular MOFs exhibiting large Stokes‐shifted broadband white‐light emission, which is probably induced by self‐trapped excitons from electron–phonon coupling in the deformable, zigzag [Pb₂X₃]⁺ (X=Cl, Br, or I) chains. In contrast, MOFs with highly symmetric, robust haloplumbate chains only exhibit narrow UV–blue photoemission. The designed MOF‐based intrinsic white‐light photoemitters have a number of advantages over hybrid inorganic–organic perovskites in terms of stability and tunability, including moisture resistance, facile functionalization of photoactive moieties onto the organic linkers, introduction of luminescent guests.     

Core‐Shell Structured Layered Lanthanide‐Organic Complexes with Stilbazolium‐type Dye Encapsulation for Multifunctional Performances

Host‐guest encapsulation of functional organic dye into a porous metal‐organic framework can give rise to the development of new functional materials. In this work, by intercalating the stilbazolium‐type dye (DEAST)I (4′‐diethylamino‐N‐methyl stilbazolium) into four lanthanide layered metal‐organic complexes (Ln‐LMOCs), i. e. {[Ln(BTB)(H₂O)₂]?3(DMF)?2(H₂O)}_n (Ln=La (1), Nd (2), Sm (3), Er (4)), four responsive (DEAST)I@Ln‐LMOC composites have been prepared, serving as multifunctional performance platform. The core–shell structures of (DEAST)I@Ln‐LMOC composites have been fully characterized by IR, UV/Vis, PXRD, SEM, TEM, TGA and ESR. Significantly, after intercalation of dyes, the (DEAST)I@Ln‐LMOC composites exhibit enhanced luminescent sensing properties in detecting Fe³⁺ with much higher water stabilities. The luminescent sensing behavior stems from the fluorescence resonance energy transfer (FRET) from the π‐electron‐rich BTB ligands to the Fe³⁺, and their higher water stabilities are induced by electrostatic interactions and lower porosity. Specially, the characteristic emissions of Sm³⁺ will not be affected after the encapsulation guest dyes, which provide a theoretical guide for the modulation of luminescence devices. Finally, better ion conductivities and diminished photocurrents can be achieved after the embedding of the functional organic dye. In all, the formation of (DEAST)I@Ln‐LMOC composites with core–shell structures can be utilized as a multifunctional platform with good stability.     

A Highly Stable Zeotype Mesoporous Zirconium Metal–Organic Framework with Ultralarge Pores

Through topological rationalization, a zeotype mesoporous Zr‐containing metal–organic framework (MOF), namely PCN‐777, has been designed and synthesized. PCN‐777 exhibits the largest cage size of 3.8 nm and the highest pore volume of 2.8 cm³ g^?1 among reported Zr‐MOFs. Moreover, PCN‐777 shows excellent stability in aqueous environments, which makes it an ideal candidate as a support to incorporate different functional moieties. Through facile internal surface modification, the interaction between PCN‐777 and different guests can be varied to realize efficient immobilization.     

Enhanced Separation of Potassium Ions by Spontaneous K+‐Induced Self‐Assembly of a Novel Metal–Organic Framework and Excess Specific Cation–π Interactions

A novel metal–organic framework (MOF) was fabricated by spontaneous K⁺‐induced supramolecular self‐assembly with the embedded tripodal ligand units. When the 3D ligand was loaded onto Fe₃O₄@mSiO₂ core‐shell nanoparticles, it could effectively separate K⁺ ions from a mixture of Na⁺, K⁺, Mg²⁺, and Ca²⁺ ions through nanoparticle‐assisted MOF crystallization into a Fe₃O₄@mSiO₂@MOF hybrid material. Excess potassium ions could be extracted because of the specific cation–π interaction between K⁺ and the aromatic cavity of the MOF, leading to enhanced separation efficiency and suggesting a new application for MOFs.     

Mixed‐Matrix Membranes

Research into extended porous materials such as metal‐organic frameworks (MOFs) and porous organic frameworks (POFs), as well as the analogous metal‐organic polyhedra (MOPs) and porous organic cages (POCs), has blossomed over the last decade. Given their chemical and structural variability and notable porosity, MOFs have been proposed as adsorbents for industrial gas separations and also as promising filler components for high‐performance mixed‐matrix membranes (MMMs). Research in this area has focused on enhancing the chemical compatibility of the MOF and polymer phases by judiciously functionalizing the organic linkers of the MOF, modifying the MOF surface chemistry, and, more recently, exploring how particle size, morphology, and distribution enhance separation performance. Other filler materials, including POFs, MOPs, and POCs, are also being explored as additives for MMMs and have shown remarkable anti‐aging performance and excellent chemical compatibility with commercially available polymers. This Review briefly outlines the state‐of‐the‐art in MOF‐MMM fabrication, and the more recent use of POFs and molecular additives.     

Surface‐Specific Functionalization of Nanoscale Metal–Organic Frameworks

A method for modifying the external surfaces of a series of nanoscale metal–organic frameworks (MOFs) with 1,2‐dioleoyl‐sn‐glycero‐3‐phosphate (DOPA) is presented. A series of zirconium‐based nanoMOFs of the same topology (UiO‐66, UiO‐67, and BUT‐30) were synthesized, isolated as aggregates, and then conjugated with DOPA to create stably dispersed colloids. BET surface area analysis revealed that these structures maintain their porosity after surface functionalization, providing evidence that DOPA functionalization only occurs on the external surface. Additionally, dye‐labeled ligand loading studies revealed that the density of DOPA on the surface of the nanoscale MOF correlates to the density of metal nodes on the surface of each MOF. Importantly, the surface modification strategy described will allow for the general and divergent synthesis and study of a wide variety of nanoscale MOFs as stable colloidal materials.     

Design and Synthesis of a Water‐Stable Anionic Uranium‐Based Metal–Organic Framework (MOF) with Ultra Large Pores

Ionic metal–organic frameworks (MOFs) are a subclass of porous materials that have the ability to incorporate different charged species in confined nanospace by ion‐exchange. To date, however, very few examples combining mesoporosity and water stability have been realized in ionic MOF chemistry. Herein, we report the rational design and synthesis of a water‐stable anionic mesoporous MOF based on uranium and featuring tbo‐type topology. The resulting tbo MOF exhibits exceptionally large open cavities (3.9 nm) exceeding those of all known anionic MOFs. By supercritical CO₂ activation, a record‐high Brunauer‐Emmett‐Teller (BET) surface area (2100 m² g^?1) for actinide‐based MOFs has been obtained. Most importantly, however, this new uranium‐based MOF is water‐stable and able to absorb positively charged ions selectively over negatively charged ones, enabling the efficient separation of organic dyes and biomolecules.     

A Recyclable bi‐functional Luminescent Zinc (II) metal–organic framework as highly selective and sensitive sensing probe for nitroaromatic explosives and Fe3+ ions

By introducing carboxyl tag to the aromatic ligands system and borrowing the organic template open framework idea, a stable fluorescent Zn metal–organic framework was successfully prepared through a rigid ligand H₆L (3,5‐bis‐(3‐carboxyphenoxy)benzoic acid) under hydrothermal conditions. The selectivity and sensitivity of the Zn‐MOF to metal ions and nitro‐aromatic compounds (NACs) were investigated by fluorescence quenching. And the Zn‐MOF showed a high sensibility of nitro‐aromatic compounds (NACs) and Fe³⁺ ions, especially for 4‐(4‐nitropheny lazo) resorcinol (NPLR). More importantly, the detection limit of the Zn‐MOF for detecting NPLR solution was found to be 1.71 ppb. Moreover, this sensor is remarkable recyclable and is promisingly applied for rapid, on‐site and sensing of explosive residuals.