固-溶法制备中温固体氧化物燃料电池高性能La0.8Sr0.2MnO3-Ba0.5Sr0.5Co0.8Fe0.2O3阴极

研究了新型固溶法合成La_0.8Sr_0.2MnO₃（LSM）包覆Ba_0.5Sr_0.5Co_0.8Fe_0.2O₃（BSCF）复合粉体（LSM-BSCF）,并探讨了其作为中温固体氧化物燃料电池阴极材料的电化学性能。LSM-BSCF阴极结合了LSM和BSCF阴极的优点,不仅增大了三相界面,而且稳定了微观结构。当温度为600-750℃时,其极化阻抗为0.61-0.09 Ω·cm²。与溶液注入法制备的高性能电极相比,极大地提高了性能稳定性。     

Modification of mixed conducting Ba<Subscript>0.5</Subscript>Sr<Subscript>0.5</Subscript>Co<Subscript>0.8</Subscript>Fe<Subscript>0.2</Subscript>O<Subscript>3–δ</Subscript> by partial substitution of cobalt with tungsten

The Ba_0.5Sr_0.5Co_0.8–xW_xFe_0.2O_3–δ (х = 0–0.1) materials prepaMIECred by partial substitution of cobalt in BSCF with tungsten were studied. The tungsten solubility limit in the structure of cubic perovskite BSCF was shown to be ~2%. The doping with the highly charged W⁶⁺ (2%) cation improved the functional properties of BSCF: it increased the oxygen permeability and membrane stability in the CO₂-containing atmosphere and suppressed the cubic–hexagonal perovskite polymorphic transition. This stabilizes high oxygen fluxes during long-term stability tests.     

The enhancement of oxygen flux on Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) hollow fibers using silver surface modification

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCF) hollow fibers were fabricated using a phase inversion/sintering method. As oxygen permeation of BSCF hollow fibers is controlled by the rate surface exchange kinetics, catalytic Ag particles were coated on both inner and outer surfaces using chemical deposition method, as verified by SEM and EDX. The Ag coated BSCF membranes showed up to 100% increase in oxygen permeation at 700 °C, and improvements lower than 10% were measured at 950 °C as compared with unmodified membranes. It was found that Ag catalyst surface loading was non-homogenous and concentrated on the perovskite grain boundaries. As a result, lighter Ag surface loading delivered improved oxygen flux while oxygen flux reached a maximum even though in the presence of excess catalyst loading. The catalytic activity of Ag was beneficial in enhancing surface reaction kinetics up to 850 °C attributed to the spillover effect. Above this temperature, the increase in oxygen permeation rate was marginally diminished due to the reduction of the spillover effect.     

AFM investigations on the influence of CO2 exposure on Ba0.5Sr0.5Co0.8Fe0.2O3–δ

In this work, fresh and CO₂-exposed specimens of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3–δ (BSCF) are examined by atomic force microscopy (AFM) using amplitude-modulated Kelvin probe force microscopy (KPFM) and also electrostatic force microscopy (EFM) to characterize the early stages of the formation of reaction products due to reaction with gaseous CO₂. A comparison is made with results from electron microscopy on the same samples. BSCF specimens exposed for 24 and 240 h to an atmosphere of 99.9 % CO₂ at 900 °C, respectively, were analyzed and compared with non-exposed specimens. The observation of interconnected carbonate islands on BSCF forming a continuous carbonate layer after some exposure to CO₂ indicates a Stranski–Krastanov or Volmer–Weber growth mechanism of the carbonate layer. Our results demonstrate that the measurement of surface potential variations by means of KPFM and EFM constitutes a very sensitive technique to detect the formation of reaction layers on gas permeation membranes such as BSCF. In contrast to electron microscopy techniques, scanning probe techniques permit the investigation of the topography and of electrochemical characteristics of the sample surface as received and without further preparation.     

Synthesis and characterization of La<Subscript>0.8</Subscript>Sr<Subscript>0.2</Subscript>Co<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>O<Subscript>3±δ</Subscript> nanopowders by microwave assisted sol–gel route

Nano-crystalline La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ powder has been successfully synthesized by microwave assisted sol–gel (MWSG) method. The decomposition and crystallization behavior of the gel-precursor was studied by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) analysis. From the result of FT-IR and X-ray diffraction patterns, it is found that a perovskite La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ was formed by irradiating the precursor at 700 W for 3 min, but the well-crystalline perovskite La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ was obtained at 700 W for 35 min. Morphological and specific area analysis of the powder were done by transmission electron microscopy (TEM), scanning electron microscope (SEM) and Brunauer–Emmett–Teller (BET). The surface areas measured was 38.9 m²/g and the grain size was ∼23 nm. Electrochemical properties of pure LSCF cathode on YSZ electrolyte at intermediate temperatures were investigated by using AC impedance analyzer, which shows a low area specific resistance (0.077 Ω cm² at 1073 K and 0.672 Ω cm² at 953 K). Moreover, the synthesis period of 20 h usually observed for conventional heating mode is reduced to a few minutes. Thus, the MWSG method is proved to be a novel, extremely facile, time-saving and energy-efficient route to synthesize LSCF powders.     

A Bifunctional Perovskite Catalyst for Oxygen Reduction and Evolution

La_0.3(Ba_0.5Sr_0.5)_0.7Co_0.8Fe_0.2O_3?δ is a promising bifunctional perovskite catalyst for the oxygen reduction reaction and the oxygen evolution reaction. This catalyst has circa 10 nm‐scale rhombohedral LaCoO₃ cobaltite particles distributed on the surface. The dynamic microstructure phenomena are attributed to the charge imbalance from the replacement of A‐site cations with La³⁺ and local stress on Co‐site sub‐lattice with the cubic perovskite structure.     

Sm0.5Sr0.5Co1−xNixO3−δ—A Novel Bifunctional Electrocatalyst for Oxygen Reduction/Evolution Reactions

The development of non-precious metal catalysts with excellent bifunctional activities is significant for air–metal batteries. ABO₃-type perovskite oxides can improve their catalytic activity and electronic conductivity by doping transition metal elements at B sites. Here, we develop a novel Sm_0.5Sr_0.5Co_1−xNi_xO_3−δ (SSCN) nanofiber-structured electrocatalyst. In 0.1 M KOH electrolyte solution, Sm_0.5Sr_0.5Co_0.8Ni_0.2O_3−δ (SSCN82) with the optimal Co: Ni molar ratio exhibits good electrocatalytic activity for OER/ORR, affording a low onset potential of 1.39 V, a slight Tafel slope of 123.8 mV dec⁻¹, and a current density of 6.01 mA cm⁻² at 1.8 V, and the ORR reaction process was four-electron reaction pathway. Combining the morphological characteristic of SSCN nanofibers with the synergistic effect of cobalt and nickel with a suitable molar ratio is beneficial to improving the catalytic activity of SSCN perovskite oxides. SSCN82 exhibits good bi-functional catalytic performance and electrochemical double-layer capacitance.     

SrNb0.1Co0.7Fe0.2O3−δ Perovskite as a Next‐Generation Electrocatalyst for Oxygen Evolution in Alkaline Solution

The perovskite SrNb_0.1Co_0.7Fe_0.2O_3?δ (SNCF) is a promising OER electrocatalyst for the oxygen evolution reaction (OER), with remarkable activity and stability in alkaline solutions. This catalyst exhibits a higher intrinsic OER activity, a smaller Tafel slope and better stability than the state‐of‐the‐art precious‐metal IrO₂ catalyst and the well‐known BSCF perovskite. The mass activity and stability are further improved by ball milling. Several factors including the optimized e_g orbital filling, good ionic and charge transfer abilities, as well as high OH^? adsorption and O₂ desorption capabilities possibly contribute to the excellent OER activity.     

Composite cathode materials Ag-Ba0.5Sr0.5Co0.8Fe0.2O3 for solid oxide fuel cells

Silver-Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF) cathodes were prepared in two ways. In the first method, Ag-BSCF composite powder was prepared in ethanol solution, where Ag nanoparticles serving as a component in the preparation of Ag-BSCF composite cathodes had been previously obtained via one-step synthesis in absolute ethanol using a neutral polymer (polyvinylpyrrolidone). To the best of our knowledge, this is the first study to use a Ag sol obtained by the above method for preparation of Ag-BSCF composite powder. Then, a paste containing this powder was screen-printed on a Sm_0.2Ce_0.8O_1.9 electrolyte and sintered at 1,000 °C. In the second technique, an aqueous solution of AgNO₃ was added to a previously sintered BSCF cathode, which was then sintered again at 800 °C. The oxygen reduction reaction at the quasi-point BSCF cathode on the Sm_0.2Ce_0.8O_1.9 electrolyte was tested by electrochemical impedance spectroscopy at different oxygen concentrations in three electrode setup. The continuous decrease of polarization resistance was observed under polarization ?0.5 V at 600 °C. The comparative studies of both obtained composite Ag-BSCF materials were performed in hydrogen-oxygen IT-SOFC involving samaria-doped ceria as an electrolyte and Ni-Gd_0.2Ce_0.8O_1.9 anode. In both cases, the addition of silver to the cathode caused an increase in current and power density compared with an IT-SOFC built with the same components but involving a monophase BSFC cathode material.     

Improvement of magnetoelectric coupling effect in Ba0.8Sr0.2TiO3-Co0.5Cu0.5Fe2O4 multiferroic fluids by tuning the composition

Ba_0.8Sr_0.2TiO₃ (BST) and Cu_0.5Co_0.5Fe₂O₄ (CCFO) nanopowders were prepared by hydrothermal method and chemical coprecipitation, respectively. Barium strontium titanate nanopowder–nano mixed oxides containing copper, cobalt, and iron (BST-CCFO) multiferroic fluids with different mass ratios (m_BST/m_CCFO = 1:2, 1:1, and 2:1) were prepared by using dimethyl silicone oil and silane coupling agent. Effect of mass ratio on the magnetoelectric performance was comparatively investigated. X-ray diffraction (XRD) showed that the BST and CCFO powders had no secondary phases, which are tetragonal perovskite structure and cubic spinel structure, respectively. Scanning electron microscopy (SEM) showed that the average grain size of BST and CCFO was 26.34 nm and 26.82 nm, respectively. The agglomeration of BST nanopowder was serious. Under the external magnetic field, the BST-CCFO multiferroic fluid will form a chain structure due to the directional movement of magnetic particles, thus enhancing the dielectric properties and ferroelectric properties of multiferroic fluid. The chain structure under the action of magnetic field will change the motion of ferroelectric particles, so that the magnetoelectric coupling effect of multiferroic fluid is significantly enhanced, which is much higher than that of the same type of magnetoelectric composite ceramics. This study is expected to provide a new way to improve the magnetoelectric coupling effect of multiferroic materials.     

Remarkable Oxygen‐Evolution Activity of a Perovskite Oxide from the Ca2−xSrxFe2O6−δ Series

Herein in we report the unprecedented catalytic activity of an iron‐based oxygen‐deficient perovskite for the oxygen‐evolution reaction (OER). The systematic trends in OER activity as a function of composition, defect‐order, and electrical conductivity have been demonstrated, leading to a methodical increase in OER catalytic activity: Ca₂Fe₂O_6?δ<CaSrFe₂O_6?δ<Sr₂Fe₂O_6?δ. Sr₂Fe₂O_6?δ also has the highest electrical conductivity and a unique type of defect‐order. In conventional experiments using glassy carbon electrode, Sr₂Fe₂O_6?δ shows better OER activity than the current state of the art catalysts, Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ and RuO₂. It also offers a high intrinsic electrical conductivity, which allows it to act as a catalyst without the need for glassy carbon electrode or carbon powder. Pure disks of this material exhibit an outstanding activity for OER, without any additives or need for electrode preparation.     

Novel in situ method (vacuum assisted electroless plating) modified porous cathode for solid oxide fuel cells

A novel in situ method – vacuum assisted electroless plating (VA–EP) is developed to modify the porous structure of various materials. The advantage of this method is it can form a metal network based on the already-given structure. We utilize this method to deposit silver (VA–EPA) in porous perovskite cathode Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCF) for an intermediate temperature solid oxide fuel cell (IT–SOFC) in the present research. The results of investigation show the performance of the modified cathode (VA–EPA–BSCF) enhances greatly, for example, the polarization resistance of VA–EPA–BSCF decreases by 60% at 600 °C compared to BSCF.     

Comparison of LaFeO3, La0.8Sr0.2FeO3, and La0.8Sr0.2Fe0.9Co0.1O3 perovskite oxides as oxygen carrier for partial oxidation of methane

Comparison of LaFeO3, La0.8Sr0.2FeO3, and La0.8Sr0.2Fe0.9CO0.1O3 perovskite oxides as oxygen carrier for partial oxidation of methane in the absence of gaseous oxygen was investigated by continuous flow reaction and sequential redox reaction, Methane was oxidized to syngas with high selectivity by oxygen species of perovskite oxides in the absence of gaseous oxygen. The sequential redox reaction revealed that the structural stability and continuous oxygen supply in redox reaction decreased over La0.8Sr0.2Fe0.9Co0. 1O3 oxide, while LaFeO3 and La0.8Sr0.2FeO3 exhibited excellent structural stability and continuous oxygen supply.     

Interfacial Enhancement by γ‐Al2O3 of Electrochemical Oxidative Dehydrogenation of Ethane to Ethylene in Solid Oxide Electrolysis Cells

Oxidative dehydrogenation of ethane (ODE) is limited by the facile deep oxidation and potential safety hazards. Now, electrochemical ODE reaction is incorporated into the anode of a solid oxide electrolysis cell, utilizing the oxygen species generated at anode to catalytically convert ethane. By infiltrating γ‐Al₂O₃ onto the surface of La_0.6Sr_0.4Co_0.2Fe_0.8O_3‐δ‐Sm_0.2Ce_0.8O_2‐δ (LSCF‐SDC) anode, the ethylene selectivity reaches as high as 92.5 %, while the highest ethane conversion is up to 29.1 % at 600 °C with optimized current and ethane flow rate. Density functional theory calculations and in situ X‐ray photoelectron spectroscopy characterizations reveal that the Al₂O₃/LSCF interfaces effectively reduce the amount of adsorbed oxygen species, leading to improved ethylene selectivity and stability, and that the formation of Al‐O‐Fe alters the electronic structure of interfacial Fe center with increased density of state around Fermi level and downshift of the empty band, which enhances ethane adsorption and conversion.     

Direct Observation of Oxygen Dissociation on Non‐Stoichiometric Metal Oxide Catalysts

Oxygen dissociation on metal oxides is a key reaction step, limiting the efficiency of numerous technologies. The complexity of the multi‐step oxygen reduction reaction (ORR) makes it difficult to investigate the oxygen dissociation step independently. Direct observation of the oxygen dissociation process is described, quantitatively, on perovskites La_0.6Sr_0.4Co_0.2Fe_0.8O_3‐δ and (La_0.8Sr_0.2)_0.95MnO_3±δ, using gas‐phase isotope‐exchange with a 1:1 ¹⁶O₂:¹⁸O₂ ratio. Oxygen transport mechanisms between gas–surface reactions and surface–bulk exchange are deconvoluted. Our findings show that regardless of participation of lattice oxygen, La_0.6Sr_0.4Co_0.2Fe_0.8O_3‐δ is better at oxygen dissociation than (La_0.8Sr_0.2)_0.95MnO_3±δ. Heteroexchange, involving lattice oxygen, dominates on La_0.6Sr_0.4Co_0.2Fe_0.8O_3‐δ. In contrast, (La_0.8Sr_0.2)_0.95MnO_3±δ shows both homoexchange and heteroexchange, with the latter only happening above 600 °C. Using a 1:1 isotope mixture, a simple method is presented for separation of the oxygen dissociation step from the overall ORR.     

Electrochemical properties of perovskite and A<Subscript>2</Subscript>MO<Subscript>4</Subscript>-type oxides used as cathodes in protonic ceramic half cells

Three selected materials have been prepared and shaped as cathode of half cells using the proton-conducting electrolyte BaCe_0.9Y_0.1O_3 − δ (BCY10): two perovskite compounds, Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3 − δ (BSCF) and La_0.6Sr_0.4Fe_0.8Co_0.2O_3 − δ (LSFC), and the praseodymium nickelate Pr₂NiO_4 + δ (PRN) having the K₂NiF₄-type structure. The electrochemical properties of these compounds have been studied under zero current conditions (two-electrode cell) and under polarization (three-electrode cell). Their measured area-specific resistances were about 1–2 Ω cm² at 600 °C. Under direct current polarization, it appears that the three compounds show almost similar values of current densities at 625 °C; however, at lower temperatures, BSCF appears to be the most efficient cathode material.     

Nickel‐substituted cobalt ferrite nanoparticles supported on arginine‐modified graphene oxide nanosheets: Synthesis and catalytic activity

The amino acid arginine was used to modify the surface of graphene oxide nanosheets and then nickel‐substituted cobalt ferrite nanoparticles were supported on those arginine‐grafted graphene oxide nanosheets (Ni_0.5Co_0.5Fe₂O₄@Arg–GO). The prepared Ni_0.5Co_0.5Fe₂O₄@Arg–GO was characterized using flame atomic absorption spectroscopy, inductively coupled plasma optical emission spectrometry, energy‐dispersive spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, Raman spectroscopy, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The application of Ni_0.5Co_0.5Fe₂O₄@Arg–GO as a catalyst was examined in a one‐pot tandem oxidative cyclization of primary alcohols with o ‐phenylenediamine to benzimidazoles under aerobic oxidation conditions. The results showed that 2‐phenylbenzimidazole derivatives were successfully achieved using Ni_0.5Co_0.5Fe₂O₄@Arg–GO nanocomposite catalyst via the one‐pot tandem oxidative cyclization strategy.     

Relationship between powder structure and electrochemical performance of Ba0.5Sr0.5Co0.8Fe0.2O3 − δ cathode material

Highly pure Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3???δ (BSCF) perovskite nanocompound was synthesized via glycine-nitrate process (GNP) and coprecipitation-azeotropic distillation method (ADM), respectively. Compared to ADM, GNP was proved to facilitate the synthesis of BSCF powder with small crystal and particle sizes as well as large surface area. BSCF material was employed as the cathode of solid oxide fuel cell (SOFC) incorporating with Sm_0.2Ce_0.8O_1.9 (SDC) electrolyte. Linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) tests indicated that the GNP powder-based cathode not only exhibited high electrocatalytic activity but also possessed low oxygen diffusion resistance due to the high porosity. As a result, the cell with GNP powder-based cathode showed a power density of 0.35 W cm^?2 when the voltage was 0.7 V at 650 °C. Furthermore, the cathode performance was significantly improved at the high current density condition.     

Preparation and Characterization of Single-Phase Perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ

Single-phase perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ has been successfully prepared by using citrate-EDTA complexation method at relatively low calcination temperature. The structure and thermal decomposition process of the complex precursor have been investigated by means of differential scanning calorimetry-thermal gravimetric analysis (DSC/TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopic (FT-IR) measurements. The precursor decomposed completely and started to form perovskite-type oxide above 420℃ according to the differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) results. Single-phase perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ obtained has been confirmed from the XRD pattern, and no peak of SrCO3 was found by XR.D of the oxides synthesized at a relatively low temperature of 800 ℃. The reducibility of La0.6Sr0.4Co0.8Fe0.2O3-δ was also characterized by the temperature programmed reduction (TPR) technique. Disk shaped dense La0.6Sr0.4Co0.8Fe0.2O3-δ membrane was prepared by the isostatical pressing method. The oxygen flux rate of dense La0.6Sr0.4Co0.8Fe0.2O3-δ membrane was (2.8-18)×10-8 mol/(cm2·s) in the temperature range of 800-1 000℃.     

A Universal and Facile Way for the Development of Superior Bifunctional Electrocatalysts for Oxygen Reduction and Evolution Reactions Utilizing the Synergistic Effect

Increasing energy demands have stimulated intense research activities on reversible electrochemical conversion and storage systems with high efficiency, low cost, and environmental benignity. It is highly challenging but desirable to develop efficient bifunctional catalysts for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). A universal and facile method for the development of bifunctional electrocatalysts with outstanding electrocatalytic activity for both the ORR and OER in alkaline medium is reported. A mixture of Pt/C catalyst with superior ORR activity and a perovskite oxide based catalyst with outstanding OER activity was employed in appropriate ratios, and prepared by simple ultrasonic mixing. Nanosized platinum particles with a wide range of platinum to oxide mass ratios was realized easily in this way. The as‐formed Pt/C–oxide composites showed better ORR activity than a single Pt/C catalyst and better OER activity than a single oxide to bring about much improved bifunctionality (ΔE is only ≈0.8 V for Pt/C–BSCF; BSCF=Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ), due to the synergistic effect. The electronic transfer mechanism and the rate‐determining step and spillover mechanism were two possible origins of such a synergistic effect. Additionally, the phenomenon was found to be universal, although the best performance could be reached at different platinum to oxide mass ratios for different oxide catalysts. This work thus provides an innovative strategy for the development of new bifunctional electrocatalysts with wide application potentials in high‐energy and efficient electrochemical energy storage and conversion.