Solvated Graphene Frameworks as High‐Performance Anodes for Lithium‐Ion Batteries

A solvent‐exchange approach for the preparation of solvated graphene frameworks as high‐performance anode materials for lithium‐ion batteries is reported. The mechanically strong graphene frameworks exhibit unique hierarchical solvated porous networks and can be directly used as electrodes with a significantly improved electrochemical performance compared to unsolvated graphene frameworks, including very high reversible capacities, excellent rate capabilities, and superior cycling stabilities.     

Fabrication of Fe‐Doped LiCoO2 Sandwich‐Like Nanocomposites as Excellent Performance Cathode Materials for Lithium‐Ion Batteries

In this article, the two‐layer sandwiched graphene@LiFe_0.2Co_0.8O₂ nanoparticles (SG@LFCO) have been prepared and investigated as high‐rate and long‐life cathode materials for rechargeable lithium‐ion batteries. The materials possess a high‐surface area (267.1 m² g^?1) and lots of void spaces. By combining various favorable conditions, such as Fe doping, coating graphene, and designing novel morphology, the as‐prepared materials deliver a specific capacity of 115 mAh g^?1 at 10 C. At the 0.1 C cycling rate, the capacity retention of 97.2 % is sustained after 250 cycles and a coulombic efficiency of around 97.6 % is obtained.     

Monodisperse Sandwich‐Like Coupled Quasi‐Graphene Sheets Encapsulating Ni2P Nanoparticles for Enhanced Lithium‐Ion Batteries

In this report, sandwiched Ni₂P nanoparticles encapsulated by graphene sheets are first synthesized by directly encapsulating functional units in graphene sheets instead of fabricating separate graphene sheets and then immobilizing the functional components onto the generated surfaces. In this strategy, we use low‐cost, sustainable and environmentally friendly glucose as a carbon source and NiNH₄PO₄ ? H₂O nanosheets as sacrificial templates. This unique structure obtained here cannot only prevent the nanoparticles from aggregation or loss but also enhance the electronic conductivity compared to the independent nanoparticles. Furthermore, the novel sandwich‐like Ni₂P/C can be applied in plenty of fields, especially in electrical energy storage. In this paper, a series of electrochemical tests of the sandwich‐like Ni₂P/C are carried out, which demonstrate the excellent cyclic stability and rate capacity for lithium‐ion batteries.     

Mesoporous Spherical Li4Ti5O12 as High‐Performance Anodes for Lithium‐Ion Batteries

Porous microspherical Li₄Ti₅O₁₂ aggregates (LTO‐PSA) can be successfully prepared by using porous spherical TiO₂ as a titanium source and lithium acetate as a lithium source followed by calcinations. The synthesized LTO‐PSA possess outstanding morphology, with nanosized, porous, and spherical distributions, that allow good electrochemical performances, including high reversible capacity, good cycling stability, and impressive rate capacity, to be achieved. The specific capacity of the LTO‐PSA at 30 C is as high as 141 mA h g^?1, whereas that of normal Li₄Ti₅O₁₂ powders prepared by a sol–gel method can only achieve 100 mA h g^?1. This improved rate performance can be ascribed to small Li₄Ti₅O₁₂ nanocrystallites, a three‐dimensional mesoporous structure, and enhanced ionic conductivity.     

Amorphous MnO2 as Cathode Material for Sodium‐ion Batteries

Amorphous MnO₂ has been prepared from the reduction of KMnO₄ in ethanol media by a facile one‐step wet chemical route at room temperature. The electrochemical properties of amorphous MnO₂ as cathode material in sodium‐ion batteries (SIBs ) are studied by galvanostatic charge/discharge testing. And the structure and morphologies of amorphous MnO₂ are investigated by X‐ray diffraction (XRD ), scanning electron microscopy (SEM ), transmission electron microscopy (TEM ) and Raman spectra. The results reveal that as‐synthesized amorphous MnO₂ electrode material exhibits a spherical morphology with a diameter between 20 and 60 nm. The first specific discharge capacity of the amorphous MnO₂ electrode is 123.2 mAh •g⁻¹ and remains 136.8 mAh •g⁻¹ after 100 cycles at the current rate of 0.1 C. The specific discharge capacity of amorphous MnO₂ is maintained at 139.2, 120.4, 89, 68 and 47 mAh •g⁻¹ at the current rate of 0.1 C, 0.2 C, 0.5 C, 1 C and 2 C, respectively. The results indicate that amorphous MnO₂ has great potential as a promising cathode material for SIBs .     

One‐Pot Synthesis of Carbon‐Coated Nanostructured Iron Oxide on Few‐Layer Graphene for Lithium‐Ion Batteries

Nanostructure engineering has been demonstrated to improve the electrochemical performance of iron oxide based electrodes in Li‐ion batteries (LIBs). However, the synthesis of advanced functional materials often requires multiple steps. Herein, we present a facile one‐pot synthesis of carbon‐coated nanostructured iron oxide on few‐layer graphene through high‐pressure pyrolysis of ferrocene in the presence of pristine graphene. The ferrocene precursor supplies both iron and carbon to form the carbon‐coated iron oxide, while the graphene acts as a high‐surface‐area anchor to achieve small metal oxide nanoparticles. When evaluated as a negative‐electrode material for LIBs, our composite showed improved electrochemical performance compared to commercial iron oxide nanopowders, especially at fast charge/discharge rates.     

Superior Electrochemical Performance of Sulfur/Graphene Nanocomposite Material for High‐Capacity Lithium–Sulfur Batteries

Sulfur/graphene nanocomposite material has been prepared by incorporating sulfur into the graphene frameworks through a melting process. Field‐emission scanning electron microscope analysis shows a homogeneous distribution of sulfur in the graphene nanosheet matrix. The sulfur/graphene nanocomposite exhibits a super‐high lithium‐storage capacity of 1580 mAh g^?1 and a satisfactory cycling performance in lithium–sulfur cells. The enhancement of the reversible capacity and cycle life could be attributed to the flexible graphene nanosheet matrix, which acts as a conducting medium and a physical buffer to cushion the volume change of sulfur during the lithiation and delithiation process. Graphene‐based nanocomposites can significantly improve the electrochemical performance of lithium–sulfur batteries.     

2 D Manganese Vanadate Nanoflakes as High‐Performance Anode for Lithium‐Ion Batteries

Nanometer‐sized flakes of MnV₂O₆ were synthesized by a hydrothermal method. No surfactant, expensive metal salt, or alkali reagent was used. These MnV₂O₆ nanoflakes present a high discharge capacity of 768 mA h g^?1 at 200 mA g^?1, good rate capacity, and excellent cycling stability. Further investigation demonstrates that the nanoflake structure and the specific crystal structure make the prepared MnV₂O₆ a suitable material for lithium‐ion batteries.     

MnO@Carbon Core–Shell Nanowires as Stable High‐Performance Anodes for Lithium‐Ion Batteries

A facile method is presented for the large‐scale preparation of rationally designed mesocrystalline MnO@carbon core–shell nanowires with a jointed appearance. The nanostructures have a unique arrangement of internally encapsulated highly oriented and interconnected MnO nanorods and graphitized carbon layers forming an external coating. Based on a comparison and analysis of the crystal structures of MnOOH, Mn₂O₃, and MnO@C, we propose a sequential topotactic transformation of the corresponding precursors to the products. Very interestingly, the individual mesoporous single‐crystalline MnO nanorods are strongly interconnected and maintain the same crystallographic orientation, which is a typical feature of mesocrystals. When tested for their applicability to Li‐ion batteries (LIB), the MnO@carbon core–shell nanowires showed excellent capacity retention, superior cycling performance, and high rate capability. Specifically, the MnO@carbon core–shell nanostructures could deliver reversible capacities as high as 801 mA h g^?1 at a high current density of 500 mA g^?1, with excellent electrochemical stability after testing over 200 cycles, indicating their potential application in LIBs. The remarkable electrochemical performance can mainly be attributed to the highly uniform carbon layer around the MnO nanowires, which is not only effective in buffering the structural strain and volume variations of anodes during repeated electrochemical reactions, but also greatly enhances the conductivity of the electrode material. Our results confirm the feasibility of using these rationally designed composite materials for practical applications. The present strategy is simple but very effective, and appears to be sufficiently versatile to be extended to other high‐capacity electrode materials with large volume variations and low electrical conductivities.     

Multiple Ambient Hydrolysis Deposition of Tin Oxide into Nanoporous Carbon To Give a Stable Anode for Lithium‐Ion Batteries

A novel ambient hydrolysis deposition (AHD) methodology that employs sequential water adsorption followed by a hydrolysis reaction to infiltrate SnO₂ nanoparticles into the nanopores of mesoporous carbon in a conformal and controllable manner is introduced. The empty space in the SnO₂/C composites can be adjusted by varying the number of AHD cycles. An SnO₂/C composite with an intermediate SnO₂ loading exhibited an initial specific delithiation capacity of 1054 mAh g^?1 as an anode for Li‐ion batteries. The capacity contribution from SnO₂ in the composite electrode approaches the theoretical capacity of SnO₂ (1494 mAh g^?1) if both Sn alloying and SnO₂ conversion reactions are considered to be reversible. The composite shows a specific capacity of 573 mAh g^?1 after 300 cycles, that is, one of the most stable cycling performances for SnO₂/mesoporous carbon composites. The results demonstrated the importance of well‐tuned empty space in nanostructured composites to accommodate expansion of the electrode active mass during alloying/dealloying and conversion reactions.     

Facile Mechanochemical Synthesis of Nano SnO2/Graphene Composite from Coarse Metallic Sn and Graphite Oxide: An Outstanding Anode Material for Lithium‐Ion Batteries

A facile method for the large‐scale synthesis of SnO₂ nanocrystal/graphene composites by using coarse metallic Sn particles and cheap graphite oxide (GO) as raw materials is demonstrated. This method uses simple ball milling to realize a mechanochemical reaction between Sn particles and GO. After the reaction, the initial coarse Sn particles with sizes of 3–30 μm are converted to SnO₂ nanocrystals (approximately 4 nm) while GO is reduced to graphene. Composite with different grinding times (1 h 20 min, 2 h 20 min or 8 h 20 min, abbreviated to 1, 2 or 8 h below) and raw material ratios (Sn:GO, 1:2, 1:1, 2:1, w/w) are investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy and transmission electron microscopy. The as‐prepared SnO₂/graphene composite with a grinding time of 8 h and raw material ratio of 1:1 forms micrometer‐sized architected chips composed of composite sheets, and demonstrates a high tap density of 1.53 g cm^?3. By using such composites as anode material for LIBs, a high specific capacity of 891 mA h g^?1 is achieved even after 50 cycles at 100 mA g^?1.     

Hierarchical Surface Atomic Structure of a Manganese‐Based Spinel Cathode for Lithium‐Ion Batteries

The increasing use of lithium‐ion batteries (LIBs) in high‐power applications requires improvement of their high‐temperature electrochemical performance, including their cyclability and rate capability. Spinel lithium manganese oxide (LiMn₂O₄) is a promising cathode material because of its high stability and abundance. However, it exhibits poor cycling performance at high temperatures owing to Mn dissolution. Herein we show that when stoichiometric lithium manganese oxide is coated with highly doped spinels, the resulting epitaxial coating has a hierarchical atomic structure consisting of cubic‐spinel, tetragonal‐spinel, and layered structures, and no interfacial phase is formed. In a practical application of the coating to doped spinel, the material retained 90 % of its capacity after 800 cycles at 60 °C. Thus, the formation of an epitaxial coating with a hierarchical atomic structure could enhance the electrochemical performance of LIB cathode materials while preventing large losses in capacity.     

An Interwoven Network of MnO2 Nanowires and Carbon Nanotubes as the Anode for Bendable Lithium‐Ion Batteries

A porous interwoven network is synthesized, consisting of ultralong MnO₂ nanowires and multi‐walled carbon nanotubes (MWCNTs). Serving as the anode for a lithium‐ion battery, this nanocomposite demonstrates excellent performance due to the synergistic integration of these two 1D materials. Taking advantage of the excellent flexibility and strength of this MnO₂–MWCNT network, a full, bendable battery is made that offers high capacity, cycling stability, and low cost.     

Excellent Performance of Few‐Layer Borocarbonitrides as Anode Materials in Lithium‐Ion Batteries

Borocarbonitrides (B_xC_yN_z) with a graphene‐like structure exhibit a remarkable high lithium cyclability and current rate capability. The electrochemical performance of the B_xC_yN_z materials, synthesized by using a simple solid‐state synthesis route based on urea, was strongly dependent on the composition and surface area. Among the three compositions studied, the carbon‐rich compound B_0.15C_0.73N_0.12 with the highest surface area showed an exceptional stability (over 100 cycles) and rate capability over widely varying current density values (0.05–1 A g^?1). B_0.15C_0.73N_0.12 has a very high specific capacity of 710 mA h g^?1 at 0.05 A g^?1. With the inclusion of a suitable additive in the electrolyte, the specific capacity improved drastically, recording an impressive value of nearly 900 mA h g^?1 at 0.05 A g^?1. It is believed that the solid–electrolyte interphase (SEI) layer at the interface of B_xC_yN_z and electrolyte also plays a crucial role in the performance of the B_xC_yN_z .     

Superhalogens as Building Blocks of Halogen‐Free Electrolytes in Lithium‐Ion Batteries

Most electrolytes currently used in Li‐ion batteries contain halogens, which are toxic. In the search for halogen‐free electrolytes, we studied the electronic structure of the current electrolytes using first‐principles theory. The results showed that all current electrolytes are based on superhalogens, i.e., the vertical electron detachment energies of the moieties that make up the negative ions are larger than those of any halogen atom. Realizing that several superhalogens exist that do not contain a single halogen atom, we studied their potential as effective electrolytes by calculating not only the energy needed to remove a Li⁺ ion but also their affinity towards H₂O. Several halogen‐free electrolytes are identified among which Li(CB₁₁H₁₂) is shown to have the greatest potential.     

Morphology‐Tuned Synthesis of NiCo2O4‐Coated 3D Graphene Architectures Used as Binder‐Free Electrodes for Lithium‐Ion Batteries

Nanostructured NiCo₂O₄ is directly grown on the surface of three‐dimensional graphene‐coated nickel foam (3D‐GNF) by a facile electrodeposition technique and subsequent annealing. The resulting NiCo₂O₄ possesses a distinct flower or sheet morphology, tuned by potential or current variation electrodeposition, which are used as binder‐free lithium‐ion battery anodes for the first time. Both samples exhibit high lithium storage capacity, profiting from the unique binder‐free electrode structures. The flower‐type NiCo₂O₄ demonstrates high reversible discharge capacity (1459 mAh g^?1 at 200 mA g^?1) and excellent cyclability with around 71 % retention of the reversible capacity after 60 cycles, which are superior to the sheet‐type NiCo₂O₄. Such superb performance can be attributed to high volume utilization efficiency with unique morphological character, a well‐preserved connection between the active materials and the current collector, a short lithium‐ion diffusion path, and fast electrolyte transfer in the binder‐free NiCo₂O₄‐coated 3D graphene structure. The simple preparation process and easily controllable morphology make the binder‐free NiCo₂O₄/3D‐GNF hybrid a potential material for commercial applications.