Characterization of complex,heterogeneous lipid A samples using HPLC‐MS/MS technique III. Positive‐ion mode tandem mass spectrometry to reveal phosphorylation and acylation patterns of lipid A

In this study, we report the detailed analysis of the fragmentation patterns of positively charged lipid A species based on their tandem mass spectra obtained under low‐energy collision‐induced dissociation conditions of an electrospray quadrupole time‐of‐flight mass spectrometer. The tandem mass spectrometry experiments were performed after the separation of the compounds with a reversed‐phase high performance liquid chromatography method. We found that both, phosphorylated and nonphosphorylated lipid A molecules can be readily ionized in the positive‐ion mode by adduct formation with triethylamine added to the eluent. The tandem mass spectra of the lipid A triethylammonium adduct ions showed several product ions corresponding to inter‐ring glycosidic cleavages of the sugar residues, as well as consecutive and competitive eliminations of fatty acids, phosphoric acid, and water following the neutral loss of triethylamine. Characteristic product ions provided direct information on the phosphorylation site(s), also when phosphorylation isomers (ie, containing either a C1 or a C4′ phosphate group) were simultaneously present in the sample. Continuous series of high‐abundance B‐type and low‐abundance Y‐type inter‐ring fragment ions were indicative of the fatty acyl distribution between the nonreducing and reducing ends of the lipid A backbone. The previously reported lipid A structures of Proteus morganii O34 and Escherichia coli O111 bacteria were used as standards. Although, the fragmentation pathways of the differently phosphorylated lipid A species significantly differed in the negative‐ion mode, they were very similar in the positive‐ion mode. The complementary use of positive‐ion and negative‐ion mode tandem mass spectrometry was found to be essential for the full structural characterization of the C1‐monophosphorylated lipid A species.     

Electron‐induced dissociation (EID) for structure characterization of glycerophosphatidylcholine: determination of double‐bond positions and localization of acyl chains

Glycerophospholipids are a highly abundant and diverse collection of biologically relevant lipids, and distinction between isomeric and isobaric species is a fundamental aspect for confident identification. The ability to confidently assign a unique structure to a glycerophospholipid of interest is dependent on determining the number and location of the points of unsaturation and assignment of acyl chain position. The use of high‐energy electrons (>20 eV) to induce gas‐phase dissociation of intact precursor ions results in diagnostic product ions for localizing double‐bond positions and determining acyl chain assignment. We describe a high‐resolution, tandem mass spectrometry method for structure characterization of glycerophospholipids using electron‐induced dissociation (EID). Furthermore, the inclusion of nomenclature to systematically assign bond cleavage sites with acyl chain position and double‐bond location enables a uniform platform for lipid identification. The EID methodology detailed here combines novel application of an electron‐based dissociation technique with high‐resolution mass spectrometry that facilitates a new experimental approach for lipid biomarker discovery and validation. Copyright © 2015 John Wiley & Sons, Ltd.     

Negative ion electrospray tandem mass spectrometric structural characterization of leukotriene B4 (LTB4) and LTB4-derived metabolites

The low energy collision induced dissociation (CID) of the carboxylate anions generated by electrospray ionization of leukotriene B₄ (LTB₄) and 16 of its metabolites was studied in a tandem quadrupole mass spectrometer. LTB₄ is a biologically active lipid mediator whose activity is terminated by metabolism into a wide variety of structural variants. The collision-induced dissociation spectra of the carboxylate anions revealed structurally informative ions whose formation was determined by the position of hydroxyl substituents and double bonds present in the LTB₄ metabolite. Major ions resulted from charge remote α-hydroxy fragmentation or charge directed α-hydroxy fragmentation. The conjugated triene moiety present in some metabolites was proposed to undergo cyclization to a 1,3-cyclohexadiene structure prior to charge remote or charge driven a-hydroxy fragmentation. The mechanisms responsible for all major ions observed in the CID spectra were studied using stable isotope labeled analogs of the LTB₄ metabolites. In general, the collision-induced decomposition of carboxylate anions produced unique spectra for all LTB₄ derived metabolites. The observed decomposition product ions from the carboxylate anion could be useful in developing assays for these molecules in biological fluids.     

Dissociation of disulfide‐intact somatostatin ions: the roles of ion type and dissociation method

The dissociation chemistry of somatostatin‐14 was examined using various tandem mass spectrometry techniques including low‐energy beam‐type and ion trap collision‐induced dissociation (CID) of protonated and deprotonated forms of the peptide, CID of peptide‐gold complexes, and electron transfer dissociation (ETD) of cations. Most of the sequence of somatostatin‐14 is present within a loop defined by the disulfide linkage between Cys‐3 and Cys‐14. The generation of readily interpretable sequence‐related ions from within the loop requires the cleavage of at least one of the bonds of the disulfide linkage and the cleavage of one polypeptide backbone bond. CID of the protonated forms of somatostatin did not appear to give rise to an appreciable degree of dissociation of the disulfide linkage. Sequential fragmentation via multiple alternative pathways tended to generate very complex spectra. CID of the anions proceeded through CH₂? S cleavages extensively but relatively few structurally diagnostic ions were generated. The incorporation of Au(I) into the molecule via ion/ion reactions followed by CID gave rise to many structurally relevant dissociation products, particularly for the [M+Au+H]²⁺ species. The products were generated by a combination of S? S bond cleavage and amide bond cleavage. ETD of the [M+3H]³⁺ ion generated rich sequence information, as did CID of the electron transfer products that did not fragment directly upon electron transfer. The electron transfer results suggest that both the S? S bond and an N? C_α bond can be cleaved following a single electron transfer reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Travelling‐wave ion mobility and negative ion fragmentation of high‐mannose N‐glycans

The isomeric structure of high‐mannose N‐glycans can significantly impact biological recognition events. Here, the utility of travelling‐wave ion mobility mass spectrometry for isomer separation of high‐mannose N‐glycans is investigated. Negative ion fragmentation using collision‐induced dissociation gave more informative spectra than positive ion spectra with mass‐different fragment ions characterizing many of the isomers. Isomer separation by ion mobility in both ionization modes was generally limited, with the arrival time distributions (ATD) often showing little sign of isomers. However, isomers could be partially resolved by plotting extracted fragment ATDs of the diagnostic fragment ions from the negative ion spectra, and the fragmentation spectra of the isomers could be extracted by using ions from limited areas of the ATD peak. In some cases, asymmetric ATDs were observed, but no isomers could be detected by fragmentation. In these cases, it was assumed that conformers or anomers were being separated. Collision cross sections of the isomers in positive and negative fragmentation mode were estimated from travelling‐wave ion mobility mass spectrometry data using dextran glycans as calibrant. More complete collision cross section data were achieved in negative ion mode by utilizing the diagnostic fragment ions. Examples of isomer separations are shown for N‐glycans released from the well‐characterized glycoproteins chicken ovalbumin, porcine thyroglobulin and gp120 from the human immunodeficiency virus. In addition to the cross‐sectional data, details of the negative ion collision‐induced dissociation spectra of all resolved isomers are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Dendrimer Disassembly in the Gas Phase: A Cascade Fragmentation Reaction of Fréchet Dendrons

The mass spectrometric characterization of Fréchet‐type dendrons is reported. In order to provide the charges necessary for electrospray ionization, dendrons bearing an OH group at the focal point can be deprotonated and observed in the negative ion mode. Alternatively, the corresponding bromides can be converted to quaternary ammonium ions that can easily be detected in the positive mode. If the latter ions are subjected to collision‐induced dissociation experiments, a fragmentation cascade begins with the dissociation of the focal amine. The focal benzyl cation quickly decomposes in a fragmentation cascade from the focal point to the periphery until the peripheral benzyl (or naphthylmethyl) cations are formed. Five different mechanisms are discussed in detail, three of which can be excluded based on experimental evidence. The cascade fragmentation is reminiscent of self‐immolative dendrimers.     

CID of singly charged antioxidants applied in lubricants by means of a 3D ion trap and a linear ion trap-Orbitrap mass spectrometer

The aim of this study was to investigate the fragmentation behavior induced by low‐energy collision‐induced dissociation (LE‐CID) of four selected antioxidants applied in lubricants, by two different types of ion trap mass spectrometers: a three‐dimensional ion trap (3D‐IT) and a linear IT (LIT) Orbitrap MS. Two sterically hindered phenols and two aromatic amines were selected as model compounds representing different antioxidant classes and were characterized by positive‐ion electrospray ionization (ESI) and LE‐CID. Various types of molecular ions (e.g. [M]^+?, [M + H]⁺, [M + NH₄]⁺ or [M + Na]⁺) were used as precursor ions generating a significant number of structurally relevant product ions. Furthermore, the phenolic compounds were analyzed by negative‐ion ESI. For both IT types applied for fragmentation, the antioxidants exhibited the same unusual LE‐CID behavior: (1) they formed stable radical product ions and (2) C? C bond cleavages of aliphatic substituents were observed and their respective cleavage sites depended on the precursor ion selected. This fragmentation provided information on the type of structural isomer usually not obtainable for branched aliphatic substituents utilizing LE‐CID. Comparing the two instruments, the main benefit of applying the LIT‐Orbitrap was direct access to elemental composition of product ions enabling unambiguous interpretation of fragmentation trees not obtainable by the 3D‐IT device (e.g. loss of isobaric neutrals). It should be emphasized that the types of product ions formed do not depend on the type of IT analyzer applied. For characterizing degradation products of antioxidants, the LIT‐Orbitrap hybrid system, allowing the determination of accurate m/z values for product ions, is the method of choice. Copyright © 2011 John Wiley & Sons, Ltd.     

Strategies for generating peptide radical cations via ion/ion reactions

Several approaches for the generation of peptide radical cations using ion/ion reactions coupled with either collision induced dissociation (CID) or ultraviolet photo dissociation (UVPD) are described here. Ion/ion reactions are used to generate electrostatic or covalent complexes comprised of a peptide and a radical reagent. The radical site of the reagent can be generated multiple ways. Reagents containing a carbon–iodine (C―I) bond are subjected to UVPD with 266‐nm photons, which selectively cleaves the C―I bond homolytically. Alternatively, reagents containing azo functionalities are collisionally activated to yield radical sites on either side of the azo group. Both of these methods generate an initial radical site on the reagent, which then abstracts a hydrogen from the peptide while the peptide and reagent are held together by either electrostatic interactions or a covalent linkage. These methods are demonstrated via ion/ion reactions between the model peptide RARARAA (doubly protonated) and various distonic anionic radical reagents. The radical site abstracts a hydrogen atom from the peptide, while the charge site abstracts a proton. The net result is the conversion of a doubly protonated peptide to a peptide radical cation. The peptide radical cations have been fragmented via CID and the resulting product ion mass spectra are compared to the control CID spectrum of the singly protonated, even‐electron species. This work is then extended to bradykinin, a more broadly studied peptide, for comparison with other radical peptide generation methods. The work presented here provides novel methods for generating peptide radical cations in the gas phase through ion/ion reaction complexes that do not require modification of the peptide in solution or generation of non‐covalent complexes in the electrospray process. Copyright © 2015 John Wiley & Sons, Ltd.     

Characterization of complex,heterogeneous lipid A samples using HPLC–MS/MS technique II. Structural elucidation of non‐phosphorylated lipid A by negative‐ion mode tandem mass spectrometry

Non‐phosphorylated lipid A species confer reduced inflammatory potential for the bacteria. Knowledge on their chemical structure and presence in bacterial pathogens may contribute to the understanding of bacterial resistance and activation of the host innate immune system. In this study, we report the fragmentation pathways of negatively charged, non‐phosphorylated lipid A species under low‐energy collision‐induced dissociation conditions of an electrospray ionization quadrupole time‐of‐flight instrument. Charge‐promoted consecutive and competitive eliminations of the acyl chains and cross‐ring cleavages of the sugar residues were observed. The A‐type fragment ion series and the complementary X‐type fragment(s) with corresponding deprotonated carboxamide(s) were diagnostic for the distribution of the primary and secondary acyl residues on the non‐reducing and the reducing ends, respectively, of the non‐phosphorylated lipid A backbone. Reversed‐phase liquid chromatography in combination with negative‐ion electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry could provide sufficient information on the primary and secondary acyl residues of a non‐phosphorylated lipid A. As a standard, the hexa‐acylated ion at m/z 1636 with the Escherichia coli‐type acyl distribution (from E. coli O111) was used. The method was tested and refined with the analysis of other non‐phosphorylated hexa‐ and several hepta‐, penta‐, and tetra‐acylated lipid A species detected in crude lipid A fractions from E. coli O111 and Proteus morganii O34 bacteria. Copyright © 2016 John Wiley & Sons, Ltd.     

Dipolar DC induced collisional activation of non‐dissociated electron‐transfer products

The application of electron transfer and dipolar direct current induced collisional activation (ET‐DDC) for enhanced sequence coverage of peptide/protein cations is described. A DDC potential is applied across one pair of opposing rods in the high‐pressure collision cell of a hybrid quadrupole/time‐of‐flight tandem mass spectrometer (QqTOF) to induce collisional activation, in conjunction with electron transfer reactions. As a broadband technique, DDC can be employed for the simultaneous collisional activation of all the first‐generation charge‐reduced precursor ions (eg, electron transfer no‐dissociation or ETnoD products) from electron transfer reactions over a relatively broad mass‐to‐charge range. A systematic study of ET‐DDC induced collision activation on peptide/protein cations revealed an increase in the variety (and abundances) of sequence informative fragment ions, mainly c‐ and z‐type fragment ions, relative to products derived directly via electron transfer dissociation (ETD). Compared with ETD, which has low dissociation efficiency for low‐charge‐state precursor ions, ET‐DDC also showed marked improvement, providing a sequence coverage of 80% to 85% for all the charge states of ubiquitin. Overall, this method provides a simple means for the broadband collisional activation of ETnoD ions in the same collision cell in which they are generated for improved structural characterization of polypeptide and protein cations subjected to ETD.     

High energy collision-induced dissociation of alkali-metal ion adducts of crown ethers and acyclic analogs.

High energy collision-induced dissociation (CID) techniques were applied for structural elucidation of alkali-metal ion adducts of crown ethers. The CID of alkali-metal adducts of tetraglyme and hexaethylene glycol were also evaluated to contrast the fragmentation pathways of the cyclic ethers with those of acyclic analogs. A common fragmentation channel for alkali-metal ion adducts of all the ethers, which results in distonic radical cations, is the homolytic cleavage of carbon-carbon bonds. Additionally, dissociation by carbon-oxygen bond cleavages occurs, and these processes are analogous to the fragmentation pathways observed for simple protonated ethers. The proposed fragmentation pathways for alkali-metal ion adducts of crown ethers result mostly in odd-electron, acyclic product ions. Dissociation of the alkali-metal ion adducts of the acyclic ethers is dominated by losses of various neutral species after an initial hydride or proton transfer. The CID processes for all ethers are independent of the alkali-metal ion sizes; however, the extent of dissociation of the complexes to bare alkali-metal ions increases with the size of the metal.     

Investigation of c ions formed by N‐terminally charged peptides upon collision‐induced dissociation

Peptide fragments such as b and y sequence ions generated upon low‐energy collision‐induced dissociation have been routinely used for tandem mass spectrometry (MS/MS)‐based peptide/protein identification. The underlying formation mechanisms have been studied extensively and described within the literature. As a result, the ‘mobile proton model’ and ‘pathways in competition model’ have been built to interpret a majority of peptide fragmentation behavior. However, unusual peptide fragments which involve unfamiliar fragmentation pathways or various rearrangement reactions occasionally appear in MS/MS spectra, resulting in confused MS/MS interpretations. In this work, a series of unfamiliar c ions are detected in MS/MS spectra of the model peptides having an N‐terminal Arg or deuterohemin group upon low‐energy collision‐induced dissociation process. Both the protonated Arg and deuterohemin group play an important role in retention of a positive charge at the N‐terminus that is remote from the cleavage sites. According to previous reports and our studies involving amino acid substitutions and hydrogen–deuterium exchange, we propose a McLafferty‐type rearrangement via charge‐remote fragmentation as the potential mechanism to explain the formation of c ions from precursor peptide ions or unconventional b ions. Density functional theory calculations are also employed in order to elucidate the proposed fragmentation mechanisms. Copyright © 2016 John Wiley & Sons, Ltd.     

A comparison of positive and negative ion collision‐induced dissociation for model heptapeptides with one basic residue

The effects of the identity and position of basic residues on peptide dissociation were explored in the positive and negative modes. Low‐energy collision‐induced dissociation (CID) was performed on singly protonated and deprotonated heptapeptides of the type: XAAAAAA, AAAXAAA, AAAAAXA and AAAAAAX, where X is arginine (R), lysine (K) or histidine (H) residues and A is alanine. For [M + H]⁺, the CID spectra are dominated by cleavages adjacent to the basic residues and the majority of the product ions contain the basic residues. The order of a basic residue's influence on fragmentation of [M + H]⁺ is arginine > histidine ≈ lysine, which is also the order of decreasing gas‐phase basicity for these amino acids. These results are consistent with the side chains of basic residues being positive ion charge sites and with the more basic arginine residues having a higher retention (i.e. sequestering) of the positive charge. In contrast, for [M ? H]^? the identity and position of basic residues has almost no effect on backbone fragmentation. This is consistent with basic residues not being negative mode charge sites. For these peptides, more complete series of backbone fragments, which are important in the sequencing of unknowns, can be found in the negative mode. Spectra at both polarities contain C‐terminal y‐ions, but y_n″⁺ has two more hydrogens than the corresponding y_n^?. Another major difference is the production of the N‐terminal backbone series b_n⁺ in the positive mode and c_n^? in the negative mode. Thus, comparison of positive and negative ion spectra with an emphasis on searching for pairs of ions that differ by 2 Da (y_n″⁺ vs y_n^?) and by 15 Da (b_n⁺ vs c_n^?) may be a useful method for determining whether a product ion is generated from the C‐terminal or the N‐terminal end of a peptide. In addition, a characteristic elimination of NH?C?NH from arginine residues is observed for deprotonated peptides. Copyright © 2010 John Wiley & Sons, Ltd.     

Gas‐phase fragmentation of γ‐lactone derivatives by electrospray ionization tandem mass spectrometry

Fragmentation reactions of β‐hydroxymethyl‐, β‐acetoxymethyl‐ and β‐benzyloxymethyl‐butenolides and the corresponding γ‐butyrolactones were investigated by electrospray ionization tandem mass spectrometry (ESI‐MS/MS) using collision‐induced dissociation (CID). This study revealed that loss of H₂O [M + H ?18]⁺ is the main fragmentation process for β‐hydroxymethylbutenolide (1) and β‐hydroxymethyl‐γ‐butyrolactone (2). Loss of ketene ([M + H ?42]⁺) is the major fragmentation process for protonated β‐acetoxymethyl‐γ‐butyrolactone (4), but not for β‐acetoxymethylbutenolide (3). The benzyl cation (m/z 91) is the major ion in the ESI‐MS/MS spectra of β‐benzyloxymethylbutenolide (5) and β‐benzyloxymethyl‐γ‐butyrolactone (6). The different side chain at the β‐position and the double bond presence afforded some product ions that can be important for the structural identification of each compound. The energetic aspects involved in the protonation and gas‐phase fragmentation processes were interpreted on the basis of thermochemical data obtained by computational quantum chemistry. Copyright © 2009 John Wiley & Sons, Ltd.     

Dissociation behavior of a bifunctional tempo‐active ester reagent for peptide structure analysis by free radical initiated peptide sequencing (FRIPS) mass spectrometry

We have synthesized a homobifunctional active ester cross‐linking reagent containing a TEMPO (2,2,6,6‐tetramethylpiperidine‐1‐oxy) moiety connected to a benzyl group (Bz), termed TEMPO‐Bz‐linker. The aim for designing this novel cross‐linker was to facilitate MS analysis of cross‐linked products by free radical initiated peptide sequencing (FRIPS). The TEMPO‐Bz‐linker was reacted with all 20 proteinogenic amino acids as well as with model peptides to gain detailed insights into its fragmentation mechanism upon collision activation. The final goal of this proof‐of‐principle study was to evaluate the potential of the TEMPO‐Bz‐linker for chemical cross‐linking studies to derive 3D‐structure information of proteins. Our studies were motivated by the well documented instability of the central NO―C bond of TEMPO‐Bz reagents upon collision activation. The fragmentation of this specific bond was investigated in respect to charge states and amino acid composition of a large set of precursor ions resulting in the identification of two distinct fragmentation pathways. Molecular ions with highly basic residues are able to keep the charge carriers located, i.e. protons or sodium cations, and consequently decompose via a homolytic cleavage of the NO―C bond of the TEMPO‐Bz‐linker. This leads to the formation of complementary open‐shell peptide radical cations, while precursor ions that are protonated at the TEMPO‐Bz‐linker itself exhibit a charge‐driven formation of even‐electron product ions upon collision activation. MS³ product ion experiments provided amino acid sequence information and allowed determining the cross‐linking site. Our study fully characterizes the CID behavior of the TEMPO‐Bz‐linker and demonstrates its potential, but also its limitations for chemical cross‐linking applications utilizing the special features of open‐shell peptide ions on the basis of selective tandem MS analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Localization of cyclopropyl groups and alkenes within glycerophospholipids using gas-phase ion/ion chemistry

Shotgun lipid analysis using electrospray ionization tandem mass spectrometry (ESI-MS/MS) is a common approach for the identification and characterization of glycerophohspholipids GPs. ESI-MS/MS, with the aid of collision-induced dissociation (CID), enables the characterization of GP species at the headgroup and fatty acyl sum compositional levels. However, important structural features that are often present, such as carbon–carbon double bond(s) and cyclopropane ring(s), can be difficult to determine. Here, we report the use of gas-phase charge inversion reactions that, in combination with CID, allow for more detailed structural elucidation of GPs. CID of a singly deprotonated GP, [GP − H]⁻, generates FA anions, [FA − H]⁻. The fatty acid anions can then react with doubly charged cationic magnesium tris-phenanthroline complex, [Mg(Phen)₃]²⁺, to form charge inverted complex cations of the form [FA − H + MgPhen₂]⁺. CID of the complex generates product ion spectral patterns that allow for the identification of carbon–carbon double bond position(s) as well as the sites of cyclopropyl position(s) in unsaturated lipids. This approach to determining both double bond and cyclopropane positions is demonstrated with GPs for the first time using standards and is applied to lipids extracted from Escherichia coli.     

Gas‐phase fragmentation reactions of protonated benzofuran‐ and dihydrobenzofuran‐type neolignans investigated by accurate‐mass electrospray ionization tandem mass spectrometry

We have investigated gas‐phase fragmentation reactions of protonated benzofuran neolignans (BNs) and dihydrobenzofuran neolignans (DBNs) by accurate‐mass electrospray ionization tandem and multiple‐stage (MSⁿ) mass spectrometry combined with thermochemical data estimated by Computational Chemistry. Most of the protonated compounds fragment into product ions B ([M + H–MeOH]⁺), C ([ B –MeOH]⁺), D ([ C –CO]⁺), and E ([ D –CO]⁺) upon collision‐induced dissociation (CID). However, we identified a series of diagnostic ions and associated them with specific structural features. In the case of compounds displaying an acetoxy group at C‐4, product ion C produces diagnostic ions K ([ C –C₂H₂O]⁺), L ([ K –CO]⁺), and P ([ L –CO]⁺). Formation of product ions H ([ D –H₂O]⁺) and M ([ H –CO]⁺) is associated with the hydroxyl group at C‐3 and C‐3′, whereas product ions N ([ D –MeOH]⁺) and O ([ N –MeOH]⁺) indicate a methoxyl group at the same positions. Finally, product ions F ([ A –C₂H₂O]⁺), Q ([ A –C₃H₆O₂]⁺), I ([ A –C₆H₆O]⁺), and J ([ I –MeOH]⁺) for DBNs and product ion G ([ B –C₂H₂O]⁺) for BNs diagnose a saturated bond between C‐7′ and C‐8′. We used these structure‐fragmentation relationships in combination with deuterium exchange experiments, MSⁿ data, and Computational Chemistry to elucidate the gas‐phase fragmentation pathways of these compounds. These results could help to elucidate DBN and BN metabolites in in vivo and in vitro studies on the basis of electrospray ionization ESI‐CID‐MS/MS data only.     

Fragmentation studies of sartans by electrospray ionization mass spectrometry

Sartans and related analogues with 5‐oxo‐l, 2, 4‐oxadiazole ring and tetrazole ring are investigated in detail using collision‐induced dissociation (CID) method in positive ion mode by electrospray ionization tandem mass spectrometry (ESI‐MSⁿ). It is found that the protonated sartans and related analogues tend to form the N‐substituted‐3‐substituted phenanthridin‐6‐amine ion which has a large conjugative structure. The possible fragmentation pathways were proposed for the first time, and the key structure of product ions was confirmed by high resolution tandem mass spectrometry and theoretical calculation. It is very helpful for understanding the intriguing roles of sartans analogues in fragmentation reactions and enriching the knowledge of the gas‐phase chemistry of the oxadiazole and tetrazole ring. Copyright © 2017 John Wiley & Sons, Ltd.     

Evidence for linkage position determination in cobalt coordinated pentasaccharides using ion trap mass spectrometry

A methodology to determine the linkage position of oligosaccharides is presented. In order to illustrate this technique, several oligosaccharides and disaccharides were ionized by electrospray and analyzed in a Paul trap mass spectrometer. Multiple stage tandem mass spectrometry experiments were used to determine linkage and structural information for the following four cobalt coordinated and singly charged ([M+Co?H]⁺) pentasaccharides: Lacto-N-fucopentaose I, II, III, and V. In order to differentiate between linkage positions, multiple low energy collision induced experiments with mass selected C type ions have been carried out in an ion trap mass spectrometer. Because of the coordination with cobalt, which directs the dissociation pathways, these C type ions undergo specific fragmentation reactions upon low energy collision induced dissociation. These dissociation pathways are unambiguously dependent on their linkage position, thus allowing differentiation between 1→2, 1→3, 1→4, and 1→6 linkage positions throughout the oligomers. Studies on various linked disaccharides and N-acetyl-disaccharides, which are smaller constituents of the pentasaccharides, were used to verify and confirm the results obtained from the pentasaccharides.     

Efficient Structural Characterization of Poly(Methacrylic Acid) by Activated-Electron Photodetachment Dissociation

Characterization of end-groups in poly(methacrylic acid) (PMAA) was achieved using tandem mass spectrometry after activated-electron photodetachment dissociation (activated-EPD). In this technique, multiply deprotonated PMAA oligomers produced in the negative-ion mode of electrospray ionization were oxidized into radical anions upon electron photodetachment using a 220 nm laser wavelength, and further activated by collision. In contrast to conventional collision induced dissociation of negatively charged PMAA, which mainly consists of multiple dehydration steps, fragmentation of odd-electron species is shown to proceed via a radical-induced decarboxylation, followed by reactions involving backbone bond cleavages, giving rise to product ions containing one or the other oligomer termination. A single radical-induced mechanism accounts for the four main fragment series observed in MS/MS. The relative position of the radical and of the anionic center in distonic precursor ions determines the nature of the reaction products. Experiments performed using PMAA sodium salts allowed us to account for relative abundances of product ions in series obtained from PMAA, revealing that ion stability is ensured by hydrogen bonds within pairs of MAA units.