蓄热调温石蜡相变微胶囊的制备及性能

采用界面聚合法,以甲苯2,4-二异氰酸酯和哌嗪为反应单体、30号相变石蜡为芯材,制得了一种智能纺织品用蓄热调温相变微胶囊。通过红外光谱、扫描电镜、差示扫描量热仪对微胶囊的化学组成、形貌和蓄热性能进行了表征,测试了其耐热和耐溶剂性。结果表明:所得微胶囊主要为球形,表面光滑,平均粒径为10.6μm,对w=0.40的NaOH溶液、w=0.60的H2SO4溶液、无水乙醇、丙酮稳定,能被甲苯、二甲基甲酰胺、乙醚破坏。相变潜热为118 J/g,石蜡在微胶囊中的质量分数为84%。     

Thermal-Conductivity-Enhancing Copper-Plated Expanded Graphite/Paraffin Composite for Highly Stable Phase-Change Materials

Paraffin (PA)/expanded graphite (EG) is an important composite phase change material with low cost, high heat storage, good thermal conductivity and cycling stability. Its thermal conductivity needs to be further improved for application in the thermal management system of power lithium-ion batteries. In this paper, copper plated expanded graphite (CPEG) with 3D porous structure was prepared by electroless copper plating method, which was used as thermal conductivity enhancing material to replace part of EG in PA/EG composite materials. For the optimized phase change material composed of 80 %PA-14 %EG-6 %CPEG, the copper content is very low (0.768 wt %), but its thermal conductivity can be significantly improved without loss of latent heat and thermal cycling stability. Its thermal conductivity is increased from 11 times to 16.5 times that of paraffin while compared with the copper-free composite material (80 %PA-20 %EG). The PA/EG/CPEG composite material exhibits good temperature control effect on power lithium-ion batteries.     

石蜡相变微胶囊的制备与表征

采用复乳交联法制备了以相变石蜡为芯材、壳聚糖为壁材的新型储能相变微胶囊。 此相变微胶囊具有很高的相变焓值（可达110 J/g以上）,并且可以根据具体需要改变芯材的温度;TGA研究表明,该相变微胶囊具有很好的热稳定性,在150 ℃以下可以稳定存在;由于壳材料进行了化学交联反应,使得该相变微胶囊具有很好溶剂稳定性,可以在水、乙醇和乙醚等常见溶剂中稳定存在。     

New Polyurethane/Docosane Microcapsules as Phase‐Change Materials for Thermal Energy Storage

Polyurethane microcapsules were prepared by mini‐emulsion interfacial polymerization for encapsulation of phase‐change material (n‐docosane) for energy storage. Three steps were followed with the aim to optimize synthesis conditions of the microcapsules. First, polyurethane microcapsules based on silicone oil core as an inert template with different silicone oil/poly(ethylene glycol)/4,4′‐diphenylmethane diisocyanate wt % ratio were synthesized. The surface morphology of the capsules was analyzed by scanning electronic microscopy (SEM) and the chemical nature of the shell was monitored by Fourier transform infrared spectroscopy (FT‐IR). Capsules with the silicone oil/poly(ethylene glycol)/4,4′‐diphenylmethane diisocyanate 10/20/20 wt % ratio showed the best morphological features and shell stability with average particle size about 4 μm, and were selected for the microencapsulation of the n‐docosane. In the second stage, half of the composition of silicone oil was replaced with n‐docosane and, finally, the whole silicone oil content was replaced with docosane following the same synthetic procedure used for silicone oil containing capsules. Thermal and cycling stability of the capsules were investigated by thermal gravimetric analysis (TGA) and the phase‐change behavior was evaluated by differential scanning calorimetry (DSC).     

三元脂肪酸/膨胀石墨复合相变材料的制备、包覆定形及热性能

采用癸酸、 月桂酸和棕榈酸的三元共晶混合物作为相变材料, 以膨胀石墨为基体, 通过膨胀石墨多孔结构的毛细吸附和复合涂饰剂的包覆定形, 将多元相变材料固定在膨胀石墨的孔道结构中, 制备出结构稳定、 密封性能优异、 热稳定性好和高导热的新型三元脂肪酸/膨胀石墨复合定形相变材料. 膨胀石墨具有膨胀疏松的多孔结构和良好的吸附性能; 其熔融潜热为95.6 J/g, 结晶焓为82.8 J/g, 说明其具有很好的相变蓄热特性和热循环稳定性; 材料的导热性能可增加至0.738 W/(m·K), 与脂肪酸相比得到大幅度提高.     

Characterization of Unripe and Mature Avocado Seed Oil in Different Proportions as Phase Change Materials and Simulation of Their Cooling Storage

Environmental problems have been associated with energy consumption and waste management. A solution is the development of renewable materials such as organic phase change materials. Characterization of new materials allows knowing their applications and simulations provide an idea of how they can developed. Consequently, this research is focused on the thermal and chemical characterization of five different avocado seed oils depending on the maturity stage of the seed: 100% unripe, 25% mature-75% unripe, 50% mature-50% unripe, 75% mature-25% unripe, and 100% mature. The characterization was performed by differential scanning calorimetry, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The best oil for natural environments corresponded to 100% matured seed with an enthalpy of fusion of 52.93 J·g−1, and a degradation temperature between 241–545 °C. In addition, the FTIR analysis shows that unripe seed oil seems to contain more lipids than a mature one. Furthermore, a simulation with an isothermal box was conducted with the characterized oil with an initial temperature of −14 °C for the isothermal box, −27 °C for the PCM box, and an ambient temperature of 25 °C. The results show that without the PCM the temperature can reach −8 °C and with it is −12 °C after 7 h, proving its application as a cold thermal energy system.     

长链烷酸接枝羟丙基纤维素相变材料的制备及其性能

采用酯化的方法将具有相变特征的长链脂肪酸接枝到羟丙基纤维素主链上, 得到了一系列性能稳定, 温度范围适宜的高分子固-固相变材料, 并利用傅里叶红外光谱(FT-IR)、核磁共振(NMR)、差示扫描量热仪(DSC)、热失重分析仪(TGA)和X射线散射等技术手段对其化学结构及相变行为进行了研究。 结果表明, 该材料呈现出可逆的固-固相转变特性, 相变温度范围可通过改变脂肪酸的长度调节。 利用棕榈酸、硬脂酸和花生酸获得的相变材料焓值达到60 J/g, 所获得的材料在250 ℃以内不发生热分解。 通过将两种长链脂肪酸混合同时接枝到羟丙基纤维素主链上, 所得产物的吸/放热温度随着混合脂肪酸组分含量的变化而变化, 同时X射线散射的结果也证明羟丙基纤维素混合酯的分子间距是位于其两种单一酯之间的。这一结果为制备一定温度范围内任意相变温度的高分子固-固相变材料提供了简便的方法。     

具有薄荷香味的相变微胶囊的制备与表征

利用界面聚合法,以异佛尔酮二异氰酸酯与己二胺为单体聚合形成的聚脲为外壳,以正十八烷、薄荷素油的混合物为芯材,制备了具有薄荷香味的相变微胶囊。利用光学显微镜、扫描电镜、红外光谱仪、差示扫描量热仪、热重分析仪等对微胶囊的形貌、化学结构和热性能进行了表征。结果表明:制备的微胶囊为球形,平均粒径约7.0μm,有较高的储热能力和较好的热稳定性;芯材中添加8.3%的正十四醇或高熔点石蜡,可很好地抑制相变微胶囊的过冷现象。     

相变物质正十四醇微胶囊的制备与表征综合化学实验

为将相变储能材料这一前沿研究领域引入到本科教学实验中,特推荐一个综合性研究实验--相变物质正十四醇微胶囊的制备与表征。首先采用原位聚合法制备以正十四醇为芯材的相变微胶囊,然后运用红外光谱仪、扫描电子显微镜和差示扫描量热法分别对微胶囊的化学结构、形貌和储热性能进行了表征。该实验的制备部分可使学生熟悉高分子化学中缩聚反应原理以及微胶囊制备中常用的原位聚合法,对产物的测试和表征有利于加深学生对红外光谱法和差示扫描量热法的理解。实验过程既锻炼了学生的动手操作能力,也培养了学生的科研创新能力。     

活性炭/有机质复合相变材料的热-电性能

用活性炭(AC)作为支撑材料,石蜡(PW)、十六酸(PA)和硬脂酸(SA)作为相变主材,通过熔融共混法制备AC/PW、AC/PA和AC/SA复合相变材料,并考察了其热-电性能。结果表明,添加活性炭时有机质均不会泄漏;复合材料充-放热过程中温度场分布都比较均匀,热循环会使材料导热性能略有下降;此外,三种复合材料的电阻率均随压力增加而减小。     

添加提钒尾渣对膨胀石墨/石蜡复合相变材料稳定性和导电性的影响

以不同膨胀石墨(EG-300、EG-350和EG-400)为支撑材料,石蜡(PW)为相变主材,提钒尾渣(VT)为导电强化剂,采用熔融共混法制备复合相变材料,并对复合材料的稳定性和导电性进行测试分析.结果表明,进行60次热循环,EG/PW复合材料质量损失率小于0.03％,VT/EG/PW复合材料质量损失率小于0.08％,...     

Extensively Reversible Thermal Transformations of a Bistable,Fluorescence‐Switchable Molecular Solid: Entry into Functional Molecular Phase‐Change Materials

Functional phase‐change materials (PCMs) are conspicuously absent among molecular materials in which the various attributes of inorganic solids have been realized. While organic PCMs are primarily limited to thermal storage systems, the amorphous–crystalline transformation of materials like Ge‐Sb‐Te find use in advanced applications such as information storage. Reversible amorphous–crystalline transformations in molecular solids require a subtle balance between robust supramolecular assembly and flexible structural elements. We report novel diaminodicyanoquinodimethanes that achieve this transformation by interlinked helical assemblies coupled with conformationally flexible alkoxyalkyl chains. They exhibit highly reversible thermal transformations between bistable (crystalline/amorphous) forms, along with a prominent switching of the fluorescence emission energy and intensity.     

用非等温DSC基于Harcourt-Esson方程估算含能材料热爆炸临界温度的一种简单方法

用合理假设,由Semenov热爆炸理论和基于Harcourt-Esson速率表达式非等温动力学方程 ,推导了估算含能材料热爆炸临界温度的一种简单方法。该计算式为 ,比较简单。从非等温DSC曲线上onset温度（ ）通过表达式 可得到 ,由方程 可求得 值,随后算出 。该方法计算结果与Zhang-Hu-Xie-Li方法结果相一致。     

石蜡/膨胀石墨/石墨烯复合相变储热材料的制备及性能

以石蜡(PA)作为相变储热材料、 膨胀石墨(EG)作为主导热材料和支撑材料, 石墨烯气凝胶(GA)作为导热增强材料和辅支撑材料制备了PA/EG/GA复合相变材料, 研究了GA添加量对复合相变材料相变温度、 相变潜热、 导热性能以及循环稳定性的影响. 结果表明, 所制备的80%PA-17%EG-3%GA复合相变材料导热性能良好, 循环稳定性出色. 与80%PA-20%EG复合材料相比, 该材料的相变温度、 相变潜热以及循环稳定性无明显变化, 但导热系数由4.089 W/(m·K)提升到了5.336 W/(m·K), 显示出良好的应用前景.     

六羟基化合物为骨架的高分子固-固相变材料的合成与性能

分别使用三种含6个羟基的化合物(山梨醇、双季戊四醇和肌醇)作为分子骨架,聚乙二醇(PEG)作为相变功能链,4,4'-二苯基甲烷二异氰酸酯(MDI)为交联剂,合成了3种具有不同交联结构的新型固-固相变储能材料。通过傅里叶变换红外光谱(FT IR)、X-射线衍射(XRD)、偏光显微镜(POM)、示差扫描量热法(DSC)和热重量分析法(TG)分别对合成材料的分子结构、结晶性能、相变行为和热稳定性进行了研究。结果显示,所制备的材料在30~70℃温度范围内具有典型的固-固相变特性,其升温和冷却过程的相变焓最高可达107.5J/g和102.9J/g。此外,通过热重分析发现所合成材料具有较好的可重复使用性和热稳定性。因此,合成的新型固-固相变材料在热能储存和控温领域具有巨大的应用潜力。     

一种致密的相变储能微胶囊的制备与表征

制备了以聚脲为第一壁材、苯乙烯-二乙烯苯为第二壁材,以相变点在16℃左右的石蜡为芯材的相变储能微胶囊。采用红外光谱、差示扫描量热分析、热重分析测试技术表征了制备的相变储能微胶囊的结构组成以及热性能;采用溶剂淋洗法研究了影响包覆率的因素。结果表明,相变储热微胶囊是复合相变材料,微胶囊的热稳定性好,致密性优良;通过对水油比、乳化剂及苯乙烯-二乙烯苯用量等各因素对微胶囊包覆率影响的讨论,得出在水与油质量比3.2,乳化剂相对于水的质量分数为2%时,加入苯乙烯与二乙烯苯质量比为10∶1混合液的质量分数为6.0%时,其包覆率达81.14%;制备的微胶囊能耐较高温度,在150℃以下无质量损失,且微胶囊储热能力高达80J/g。同时发现,储热能力与芯壁比有关,比值越大储热潜能越高。     

In Situ Synthesis of Porous Carbons by Using Room‐Temperature,Atmospheric‐Pressure Dielectric Barrier Discharge Plasma as High‐Performance Adsorbents for Solid‐Phase Microextraction

A one‐step, template‐free method is described to synthesize porous carbons (PCs) in situ on a metal surface by using a room‐temperature, atmospheric‐pressure dielectric barrier discharge (DBD) plasma. This method not only features high efficiency, environmentally friendliness, and low cost and simple equipment, but also can conveniently realize large‐area synthesis of PCs by only changing the design of the DBD reactor. The synthesized PCs have a regulated nestlike morphology, and thus, provide a high specific surface area and high pore volume, which result in excellent adsorption properties. Its applicability was demonstrated by using a PC‐coated stainless‐steel fiber as a solid‐phase microextraction (SPME) fiber to preconcentrate polycyclic aromatic hydrocarbons (PAHs) prior to analysis by gas chromatography with flame ionization detection (GC‐FID). The results showed that the fiber exhibited excellent enrichment factors (4.1×10⁴ to 3.1×10⁵) toward all tested PAHs. Thus, the PC‐based SPME‐GC‐FID provides low limits of detection (2 to 20 ng L ^?1), good precision (<7.8 %), and good recoveries (80–115 %) for ultra‐sensitive determination of PAHs in real water samples. In addition, the PC‐coated fiber could be stable enough for more than 500 replicate extraction cycles.     

Emerging Applications of Phase‐Change Materials (PCMs): Teaching an Old Dog New Tricks

The nebulous term phase‐change material (PCM) simply refers to any substance that has a large heat of fusion and a sharp melting point. PCMs have been used for many years in commercial applications, mainly for heat management purposes. However, these fascinating materials have recently been rediscovered and applied to a broad range of technologies, such as smart drug delivery, information storage, barcoding, and detection. With the hope of kindling interest in this incredibly versatile range of materials, this Review presents an array of aspects related to the compositions, preparations, and emerging applications of PCMs.     

无柔性间隔基侧链型液晶高分子复合定形相变材料的制备与性能研究

设计合成了一系列具有不同烷氧基尾链长度的单体4′-烷氧基-4-联苯酚甲基丙烯酸酯Mbi Cm(m=1,2,4,6,8,10,12,14,16,18),通过自由基聚合方法合成了相应的具有不同烷氧基尾链长度的无柔性间隔基侧链型液晶高分子PMbi Cm,将所得的侧链型液晶高分子和相变材料石蜡按一定质量比混合,通过"加热-冷却法"成功制备了定形相变材料.通过凝胶测试发现当尾链长度为m=12,14,16,18时,高分子对固体石蜡具有良好的凝胶定形效果,且随着烷氧基尾链的增长,聚合物和石蜡的相容性增加,最低凝胶浓度降低,得到定形相变材料的凝胶解缔温度也相应下降.通过示差扫描量热法(DSC)、热重分析法(TG)、流变(Rheology)等测试考察了定形相变材料的相变储能性能、热稳定性和流变性能,实验结果表明该定形相变材料具有相变焓值高、热稳定性好、凝胶强度高等优点.通过红外光谱(FTIR)、偏光显微镜(POM)和扫描电镜(SEM)等测试发现PMbi Cm通过非共价键作用力自聚集形成三维凝胶网络结构,对石蜡起固定支撑作用.     

相变贮热材料四氯合钴酸铵共析物的制备和热性能

在温度353 K的乙醇溶液中, 采用热回流法合成了热致相变化合物四氯合钴酸铵(1-C_nH_2n+1NH₃)₂CoCl₄(n=10, 18)(分别简写为C₁₀Co、C₁₈Co)及其二元混合物. 利用差示扫描量热和X射线法对二元体系进行了表征.根据测定实验数据构筑二元相图, 所得相图结果表明, 在w_C10Co=52.51% (质量分数)处存在中间化合物(1-C₁₀H₂₁NH₃)(1-C₁₈H₃₇NH₃)CoCl₄. 相图还包括两个三相线, 相对应的两个共析温度分别为(347±1)和(343±1) K, 共析点分别在w_C10Co=38.50%和w_C10Co=69.86%处. 并且, 在相图的左右边界存在端际固溶体(α、β)及中间区域存在非化学计量相(γ). 四氯合钴酸铵及其二元混合体系作为相变材料贮热时, 相变温度范围为340-370 K, 相变焓大小范围在2.13到141.12 J·g^-1之间.