Synthesis and Antimicrobial Activity of 2‐(4‐(Hydroxyalkyl)‐1H‐1,2,3‐triazol‐1‐yl)‐N‐substituted propanamides

A series of 21 2‐(4‐(hydroxyalkyl)‐1H ‐1,2,3‐triazol‐1‐yl)‐N ‐substituted propanamides (1,4‐disubstituted 1,2,3‐triazoles having amide linkage and hydroxyl group) have been synthesized from click reaction between terminal alkyne and 2‐azido‐N ‐substituted propanamide (generated in situ from reaction of 2‐bromo‐N ‐substituted propanamide and sodium azide) and characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopy, and HRMS. All the newly synthesized triazoles were tested in vitro for antimicrobial activity against four bacterial cultures – Escherichia coli , Enterobacter aerogenes , Klebsiella pneumoniae , and Staphylococcus aureus – and two fungal cultures – Candida albicans and Aspergillus niger . The synthesized 1,4‐disubstituted 1,2,3‐triazoles displayed moderate to good antimicrobial potential against the tested strains.     

Benedict's solution/ vitamin C: An alternative catalytic protocol for the synthesis of regioselective‐1,4‐disubstituted‐1H‐1,2,3‐triazoles at room temperature

A novel and highly efficient method for the synthesis of 1,4‐disubstituted‐1H‐1,2,3‐triazoles by copper‐catalyzed azide‐alkyne cycloaddition has been developed. This economic and sustainable protocol uses a readily available Benedict's solution/Vitamin C catalyst system affording a wide range of 1,4‐disubstituted‐1H‐1,2,3‐triazoles under mild conditions.     

Metal‐Free CN‐ and NN‐Bond Formation: Synthesis of 1,2,3‐Triazoles from Ketones,N‐Tosylhydrazines,and Amines in One Pot

A novel synthetic approach toward 1,4‐disubstituted 1,2,3‐triazoles by C?N‐ and N?N‐bond formation has been established under transition‐metal‐free conditions. Complete control of the regioselectivity was successfully achieved. Commercially available anilines, ketones, and N‐tosylhydrazine were treated with molecular iodine in one pot to allow the regioselective generation of 1,4‐disubstituted 1,2,3‐triazoles in high yields without the use of azides.     

A Novel ‘Domino‐Click Approach’ to Unsymmetrical Bis‐1H‐1,2,3‐triazoles

Aryl azides 1 were treated with allenylmagnesium bromide ( 2 ) to generate 1,5‐disubstituted butynyl‐1H‐1,2,3‐triazoles 3 in a domino fashion, which upon Cu^I‐catalyzed 1,3‐dipolar cycloaddition with aryl azides 4 afforded novel bis‐1H‐1,2,3‐triazoles 5 in quantitative yields (Scheme 1 and Table).     

A General Proline‐Catalyzed Synthesis of 4,5‐Disubstituted N‐Sulfonyl‐1,2,3‐Triazoles from 1,3‐Dicarbonyl Compounds and Sulfonyl Azide

An efficient proline‐catalyzed synthesis of 4,5‐disubstituted‐N‐sulfonyl‐1,2,3‐triazoles has been accomplished from 1,3‐dicarbonyl compounds and sulfonyl azides. The developed reaction is suitable for various symmetrical and unsymmetrical 1,3‐dicarbonyl compounds, tolerates various functional groups and affords 4,5‐disubstituted‐N‐sulfonyl‐1,2,3‐triazoles in good yield with excellent regioselectivity. Rhodium‐catalyzed denitrogenative functionalization of 4,5‐disubstituted‐N‐sulfonyl‐1,2,3‐triazoles further demonstrates their utility in organic synthesis.     

Novel Hyperbranched Poly([1,2,3]‐triazole)s Derived from AB2 Monomers by a 1,3‐Dipolar Cycloaddition

Summary: Novel hyperbranched poly([1,2,3]‐triazole)s were synthesized from several AB₂ monomers by a 1,3‐dipolar cycloaddition reaction. The compound 3,5‐bis(propargyloxy)benzyl azide was polymerized thermally at room temperature leading to 1,4‐ and 1,5‐disubstituted poly([1,2,3]‐triazole) and catalytically leading only to the 1,4‐disubstituted poly([1,2,3]‐triazole). Only the thermal reaction led to fully soluble products. The AB₂ monomers containing an internal alkyne A unit could be autopolymerized thermally under mild reaction conditions leading to soluble, high‐molecular‐weight hyperbranched poly([1,2,3] triazole)s. All products were characterized by detailed NMR investigations.

Synthesis route for polymers 8a and 8b .     

Efficient Synthesis of Pyrrolo [2,3‐d] Pyrimidines Containing 1,4‐Disubstituted‐1,2,3‐Triazole Derivatives

Here, we demonstrate a simple but highly efficient method for the synthesis of multifunctionalized pyrrolo[2,3‐d]pyrimidines containing 1,4‐disubstituted 1,2,3‐triazole derivative coupled with various amines ( 10a , 10b , 10c , 10d , 10e , 10f , 10g ) and alcohol ( 10h ) to obtain final compounds ( 11a , 11b , 11c , 11d , 11e , 11f , 11g , 11h ) with reasonable to excellent yields (25% to 94%). The newly synthesized compounds were characterized by IR, ¹HNMR, ¹³CNMR, and mass spectroscopy analysis.     

Cu(I)‐Catalyzed Regioselective and Highly Efficient One‐Pot Synthesis of Novel 1,2,3‐Triazoles Decorated with Pyridine and Heterocyclic Amines

An efficient one‐pot synthesis of 1,2,3‐triazoles via the three‐component coupling reaction between propargyl bromide, secondary amines, and 3‐azidopyridine in the presence of CuI as catalyst has been presented. The reaction is highly regioselective and afforded novel 1,4‐disubstituted‐1,2,3‐triazoles in excellent yields by the [3 + 2] Huisgen cycloaddition reaction. This method avoids isolation and handling of terminal acetylenes. The ease of purification has made this methodology clean and safe for the synthesis of 1,2,3‐triazoles with a broad scope.     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

Selenium heterocycles XLIV. Syntheses of 8,9‐dihydro‐1,2,3‐thiadiazolo[4,5‐a]‐4,7‐dihydroxynaphthalene and 1,2,3‐selenadiazolo[4,5‐a]‐4,7‐dimethoxynaphthalene

The reaction of thionyl chloride with the semicarbazone 2 gave 4,5‐dihydro‐6,9‐dihydroxynaphtho‐[1,2‐d][1,2,3]thiadiazole ( 3 ) instead of 4,5‐dihydro‐6,9‐dimethyoxynaphtho[1,2‐d][1,2,3]thiadiazole ( 4 ). Selenium dioxide oxidation of compound 2 gave 4,5‐dihydro‐6,9‐dimethyoxynaphtho[1,2‐d][1,2,3]selenadiazole ( 5 ). Oxidation of compound 5 with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone afforded 6,9‐dimethyoxynaphtho[1,2‐d][1,2,3]selenadiazole ( 6 ).     

Metal‐Free Synthesis of Functional 1‐Substituted‐1,2,3‐Triazoles from Ethenesulfonyl Fluoride and Organic Azides

The boom in growth of 1,4‐disubstituted triazole products, in particular, since the early 2000’s, can be largely attributed to the birth of click chemistry and the discovery of the Cu^I‐catalyzed azide–alkyne cycloaddition (CuAAC). Yet the synthesis of relatively simple, albeit important, 1‐substituted‐1,2,3‐triazoles has been surprisingly more challenging. Reported here is a straightforward and scalable click‐inspired protocol for the synthesis of 1‐substituted‐1,2,3‐triazoles from organic azides and the bench stable acetylene surrogate ethenesulfonyl fluoride (ESF). The new transformation tolerates a wide selection of substrates and proceeds smoothly under metal‐free conditions to give the products in excellent yield. Under controlled acidic conditions, the 1‐substituted‐1,2,3‐triazole products undergo a Michael addition reaction with a second equivalent of ESF to give the unprecedented 1‐substituted triazolium sulfonyl fluoride salts.     

1,3‐Dipolar Cycloaddition Reactions of Organic Azides with Morpholinobuta‐1,3‐dienes and with an α‐Ethynyl‐enamine

The cycloaddition of organic azides with some conjugated enamines of the 2‐amino‐1,3‐diene, 1‐amino‐1,3‐diene, and 2‐aminobut‐1‐en‐3‐yne type is investigated. The 2‐morpholinobuta‐1,3‐diene 1 undergoes regioselective [3+2] cycloaddition with several electrophilic azides RN₃ 2 ( a , R=4‐nitrophenyl; b , R=ethoxycarbonyl; c , R=tosyl; d , R=phenyl) to form 5‐alkenyl‐4,5‐dihydro‐5‐morpholino‐1H‐1,2,3‐triazoles 3 which are transformed into 1,5‐disubstituted 1H‐triazoles 4a , d or α,β‐unsaturated carboximidamide 5 (Scheme 1). The cycloaddition reaction of 4‐[(1E,3Z)‐3‐morpholino‐4‐phenylbuta‐1,3‐dienyl]morpholine ( 7 ) with azide 2a occurs at the less‐substituted enamine function and yields the 4‐(1‐morpholino‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 8 (Scheme 2). The 1,3‐dipolar cycloaddition reaction of azides 2a – d with 4‐(1‐methylene‐3‐phenylprop‐2‐ynyl)morpholine ( 9 ) is accelerated at high pressure (ca. 7–10 kbar) and gives 1,5‐disubstituted dihydro‐1H‐triazoles 10a , b and 1‐phenyl‐5‐(phenylethynyl)‐1H‐1,2,3‐triazole ( 11d ) in significantly improved yields (Schemes 3 and 4). The formation of 11d is also facilitated in the presence of an equimolar quantity of tBuOH. The three‐component reaction between enamine 9 , phenyl azide, and phenol affords the 5‐(2‐phenoxy‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 14d .     

Conjugate Addition of Lithiated (S)‐4‐Isopropyl‐3‐ [(methylthio)methyl]‐5,5‐diphenyloxazolidin‐2‐one to Cinnamoyl Derivatives: Preparation of Enantiomerically Pure 1,4‐Diols

The Li derivative of (S)‐4‐isopropyl‐3‐[(methylthio)methyl]‐5,5‐diphenyloxazolidin‐2‐one (Li‐ 2 ; synthetically equivalent to a chiral formyl anion) adds to enones and enoates in a 1,4‐fashion. Best results are obtained with 1,3‐diarylpropenones (chalcones; Scheme 2), trityl enones, and 2,6‐di(tert‐butyl)‐4‐methoxyphenyl cinnamates (Scheme 3), with yields up to 80% and diastereoselectivities up to and above 99 : 1 of the products ( 5a – f and 8a , b , e ) containing three stereogenic centers! X‐Ray crystal‐structure analysis reveals that the C,C‐bond formation occurs preferentially with relative topicity ul (Re/Si; Fig. 2). The MeS group of the 1,4‐adducts can be replaced by RO groups in Hg²⁺‐assisted substitutions, with subsequent removal and facile recovery of the chiral auxiliary (Schemes 4–6). 4‐Hydroxycarbonyl derivatives (‘homoaldols') and mono‐, di‐, and trisubstituted 1,4‐diols are, thus, accessible in enantiomerically pure forms (cf. 15, 16 , and 18 – 20 ).     

Synthesis of 5,7‐Disubstituted 7H‐Pyrrolo[2,3‐d]Pyrimidin‐4(3H)‐ones and Their N‐Alkylation's under Phase Transfer Conditions

5,7‐disubstituted 7H‐pyrrolo[2,3‐d]pyrimidin‐4(3H)‐ones 2 were synthesized by the cyclocondensation of 1,4‐disubstituted 2‐amino‐3‐cyanopyrrole 1 with formic acid. When comparative study of N versus O alkylation of ambident 5,7‐disubstituted 7H‐pyrrolo[2,3‐d]pyrimidin‐4(3H)‐ones 2 was carried out under liquid–liquid PTC, solid–liquid PTC, and solid–liquid solvent free conditions using various alkylating agents 3 , the N‐alkylated product 4 were obtained selectively and exclusively.     

Synthesis of Purine‐based Triazoles by Copper (I)‐catalyzed Huisgen Azide–Alkyne Cycloaddition Reaction

An efficient protocol for the synthesis of substituted 1,2,3‐triazol‐9H‐purines via copper (I)‐catalyzed click chemistry of 2,6‐dichloropurine with aromatic azide has been reported. A wide range of 1,4‐disubstituted triazoles ( N‐9 substituted purines) was accessible in good‐to‐excellent yields with remarkable functional group tolerance. The base‐catalyst ratio was tuned to achieve optimum reaction condition (>95% conversion and purity in most cases). Furthermore, the structure of 4i has been unambiguously assigned by X‐ray crystallographic study to yield structural information on the 1,3‐dipoles entering the reaction.     

Synthesis of New Hybrid Heterocyclic Compounds Having 1,2,3‐Triazole and Isoxazole via Click Chemistry

A simple and highly efficient method for the regioselective synthesis of isoxazolyl‐1,4‐disubstituted‐1,2,3‐triazoles 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h , 6i , 6j , 6k , 6l in good to excellent yields from terminal alkynes having isoxazole scaffold 4a , 4b , 4c and various azides through Cu(I)‐catalyzed 1,3‐dipolar cycloaddition is described. The reaction proceeds smoothly in 1:1 mixture of t‐BuOH and water at RT. The structures of all newly synthesized hybrid heterocycles are established on the basis of spectral data ir, ¹H nmr, mass, and elemental analysis.     

Synthesis of asymmetrically substituted head‐to‐head polyacetylenes from 2,3‐disubstituted‐1,3‐butadienes

Asymmetrically substituted head‐to‐head polyacetylenes with phenyl and triphenylamine, thienyl or pyrenyl side groups were synthesized through anionic or controlled radical polymerization of 2,3‐disubstituted‐1,3‐butadienes and subsequent dehydrogenation process. Anionic polymerizations of the designed monomers bearing pendent triphenylamine and thienyl group gave narrow disperse disubstituted precursor polybutadienes with exclusive 1,4‐ or 4,1‐structure, which were confirmed by GPC and NMR measurements. In addition, the monomers possessing pyrenyl group were polymerized via nitroxide mediated radical polymerization and the resulting polymers were obtained with controlled molecular weight and low polydispersities. These polybutadiene precursors were then dehydrogenated in the presence of 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone. Thus asymmetrically substituted head‐to‐head polyacetylenes were obtained as indicated by ¹H NMR. The properties of polybutadiene precursors and the corresponding polyacetylenes were analyzed by UV–vis, DSC, and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 395–402     

Synthesis of some new 1‐acyl‐5‐aryl‐3‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐4,5‐dihydro‐1H‐pyrazole

Some new compounds (E)‐3‐aryl‐1‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐prop‐2‐en‐1‐ones 5a–e were prepared by 1‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐ethanone and various aromatic aldehydes. Then one pot reaction was happened by compounds 5a–e with hydrazine hydrate in acetic acid or propionic acid, respectively, to give the title compounds 1acyl‐5‐aryl‐3‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐4,5‐dihydro‐1H‐pyrazoles 6a–i . All structures were established by MS, IR, CHN, ¹H‐NMR and ¹³C‐NMR spectral data. J. Heterocyclic Chem., (2012).     

Two (E)‐2‐arylidene‐1,4‐di‐p‐tosyl‐1,2,3,4‐tetrahydroquinoxaline compounds: supramolecular frameworks built with C—H...O and C—H...π(arene) hydrogen bonds and π–π stacking interactions

The pyrazine ring in two N‐substituted quinoxaline derivatives, namely (E)‐2‐(2‐methoxybenzylidene)‐1,4‐di‐p‐tosyl‐1,2,3,4‐tetrahydroquinoxaline, C₃₀H₂₈N₂S₂O₅, (II), and (E)‐methyl 2‐[(1,4‐di‐p‐tosyl‐1,2,3,4‐tetrahydroquinoxalin‐2‐ylidene)methyl]benzoate, C₃₁H₂₈N₂S₂O₆, (III), assumes a half‐chair conformation and is shielded by the terminal tosyl groups. In the molecular packing of the compounds, intermolecular C—H...O hydrogen bonds between centrosymmetrically related molecules generate dimeric rings, viz. R₂²(22) in (II) and R₂²(26) in (III), which are further connected through C—H...π(arene) hydrogen bonds and π–π stacking interactions into novel supramolecular frameworks.     

Organocatalytic Asymmetric Conjugate Addition of 3‐Monosubstituted Oxindoles to (E)‐1,4‐Diaryl‐2‐buten‐1,4‐diones: A Strategy for the Indirect Enantioselective Furanylation and Pyrrolylation of 3‐Alkyloxindoles

An asymmetric conjugate addition of 3‐monosubstituted oxindoles to a range of (E)‐1,4‐diaryl‐2‐buten‐1,4‐diones, catalyzed by commercially available cinchonine, is described. This organocatalytic asymmetric reaction affords a broad range of 3,3′‐disubstituted oxindoles that contain a 1,4‐dicarbonyl moiety and vicinal quaternary and tertiary stereogenic centers in high‐to‐excellent yields (up to 98 %), with excellent diastereomeric and moderate‐to‐high enantiomeric ratios (up to 99:1 and 95:5, respectively). Subsequently, cyclization of the 1,4‐dicarbonyl moiety in the resultant Michael adducts under different Paal–Knorr conditions results in two new kinds of 3,3′‐disubstituted oxindoles—3‐furanyl‐ and 3‐pyrrolyl‐3‐alkyl‐oxindoles—in high yields and good enantioselectivities. Notably, the studies presented here sufficiently confirm that this two‐step strategy of sequential conjugate addition/Paal–Knorr cyclization is not only an attractive method for the indirect enantioselective heteroarylation of 3‐alkyloxindoles, but also opens up new avenues toward asymmetric synthesis of structurally diverse 3,3′‐disubstituted oxindole derivatives.