A one‐dimensional nickel(II) coordination polymer containing 2,6‐dipicolinate and dipyrido[3,2‐a:2′,3′‐c]phenazine

A new coordination polymer, catena‐poly[[(dipyrido[3,2‐a:2′,3′‐c]phenazine‐κ²N,N′)nickel(II)]‐μ‐2,6‐dipicolinato‐κ⁴O²,N,O⁶:O^2′], [Ni(C₇H₃NO₄)(C₁₈H₁₀N₄)]_n, exhibits a one‐dimensional structure in which 2,6‐dipicolinate acts as a bridging ligand interconnecting adjacent nickel(II) centers to form a chain structure. The asymmetric unit contains one Ni^II center, one dipyrido[3,2‐a:2′,3′‐c]phenazine ligand and one 2,6‐dipicolinate ligand. Each Ni^II center is six‐coordinated and surrounded by three N atoms and three O atoms from one dipyrido[3,2‐a:2′,3′‐c]phenazine ligand and two different 2,6‐dipicolinate ligands, leading to a distorted octahedral geometry. Adjacent chains are linked by π–π stacking interactions and weak interactions to form a three‐dimensional supramolecular network.     

N,N,N′,N′‐Tetrabromobenzene‐1,3‐disulfonamide Catalyzed Synthesis of New Spiro[chroman‐3,2′‐chromeno[2,3‐b]furan]‐2,4,4′‐(3′H)‐trione Derivatives

An efficient approach for one‐pot synthesis of biologically active new spiro[chroman‐3,2′‐chromeno[2,3‐b ]furan]‐2,4,4′‐(3′H )‐trione derivatives from tandem Knoevenagel–Michel addition–heterocyclization reaction between 4‐hydroxycumarin and various aldehydes in the presence of N,N,N ′,N ′‐tetrabromobenzene‐1,3‐disulfonamide as an efficient catalyst at ambient temperature under solvent‐free conditions was reported. Simple procedure, high yields, easy work‐up, and reusability of the catalyst are the significant advantages of this process.     

An Efficient Route for the Synthesis of 11‐Aroyldiindeno[1,2‐b:2′,1′‐e]pyridine‐10,12‐diones

A series of novel 11‐aroyldiindeno[1,2‐b :2′,1′‐e ]pyridine‐10,12‐dione derivatives were synthesized, in good to excellent yields and short reaction times via one‐pot, three‐component reactions between indan‐1,3‐dione, ammonium acetate, and arylglyoxal hydrates in the presence of solid p ‐toluenesulfonic acid.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

Study of reaction between activated acetylenes and N,N′‐diethyl‐2‐thiobarbituric acid in the presence of isocyanides or triphenylphosphine

In a series of separate experiments reaction between N,N′‐diethyl‐2‐thiobarbituric acid and acetylenic diesters in the presence of isocyanides or triphenylphosphine led to highly functionalized 4H‐pyrano[2,3‐d]thiopyrimidine or 1,4‐di‐ionic organophosphorus derivatives. The ¹H NMR spectra of diethyl‐7‐(2,6‐dimethylphenylamino)‐4‐oxo‐2‐thio‐ 1,3‐diethyl‐4H‐pyrano[2,3‐d]pyrimidine‐5,6‐dicarboxylate showed dynamic NMR effect that was attributed to restricted rotation around the aryl‐nitrogen single bond. Activation free energy (ΔG^≠) for this process is about 54.85 ± 2 kJ mol⁻¹. Betaines as 1,4‐diionic organophosphorus compounds in this reaction are possessed of two vicinal stereogenic centers and exist in the solution as a mixture of two diastereoisomers. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:228–235, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20601     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Green Synthesis of 1‐(1,2,4‐Triazol‐4‐yl)spiro[azetidine‐2,3′‐(3H)indole]‐2′,4′(1′H)‐diones as Potential Insecticidal Agents

One pot green synthesis of 1‐(1,2,4‐triazol‐4‐yl)spiro[azetidine‐2,3′‐(3H)‐indole]‐2′,4′(1′H)‐diones was carried out by the reaction of indole‐2,3‐diones,4‐amino‐4H‐1,2,4‐triazole and acetyl chloride/chloroacetyl chloride in ionic liquid [bmim]PF₆ with/without using a catalyst. It was also prepared by conventional method via Schiff's bases, 3‐[4H‐1,2,4‐triazol‐4‐yl]imino‐indol‐2‐one. Further, the corresponding phenoxy derivatives were obtained by the reaction of chloro group attached to azetidine ring with phenols. The synthesized compounds were characterized by analytical and spectral (IR, ¹H NMR, ¹³C NMR, and FAB mass) data. Evaluation for insecticidal activity against Periplaneta americana exhibited promising results.     

Novel synthesis of 2‐amino[1,4,5]benzoxadiazepine derivatives via a mild one‐pot reaction

The diazonium salt of 2‐aminophenol 2 was coupled in situ with malononitrile derivatives 3a‐d , 2‐cyanomethylthiazolin‐4‐one 9 , 2‐cyanomethylbenzimidazole 11a , and 2‐cyanomethylbenzothiazole 11b to give 2‐amino[1,4,5]benzoxadiazepine derivatives 6a‐d, 10 and 12a,b via a one‐pot reaction.     

μ‐{N,N′‐Bis[2‐(dimethyl­amino)ethyl]oxamidato(2–)}‐1κ2O,O′:2κ4N,N′,N′′,N′′′‐bis­(4,4′‐dimethyl‐2,2′‐bipyridine‐1κ2N,N′)dinickel(II) bis­(perchlorate)

In the crystal structure of the title complex, [Ni₂(C₁₀H₂₀N₄O₂)(C₁₂H₁₂N₂)₂](ClO₄)₂ or [Ni(dmaeoxd)Ni(dmbp)₂](ClO₄)₂ {H₂dmaeoxd is N,N′‐bis­[2‐(dimethyl­amino)ethyl]oxamide and dmbp is 4,4′‐dimethyl‐2,2′‐bipyridine}, the deprotonated dmaeoxd²⁻ ligand is in a cis conformation and bridges two Ni^II atoms, one of which is located in a slightly distorted square‐planar environment, while the other is in an irregular octa­hedral environment. The cation is located on a twofold symmetry axis running through both Ni atoms. The dmaeoxd²⁻ ligands inter­act with each other via C—H⋯O hydrogen bonds and π–π inter­actions, which results in an extended chain along the c axis.     

Hexanuclear Wheel‐Shaped Lithium N‐(2,6‐Diisopropylphenyl)‐N′‐(2‐pyridylethyl)benzamidinate

Lithiation of N‐(2,6‐diisopropylphenyl)‐N′‐(2‐pyridylethyl)benzamidine ( 1 ) with LiN(SiMe₃)₂ in a solvent mixture of toluene and TMEDA yields hexameric lithium N‐(2,6‐diisopropylphenyl)‐N′‐(2‐pyridylethyl)benzamidinate ( 2 ), which can be purified by recrystallization from a solvent mixture of toluene and THF. The three‐coordinate lithium ions have T‐shaped coordination spheres. The negative charge is delocalized within the 1,3‐diazaallylic system, which adopts a (syn‐Z)‐arrangement.     

Facile One‐pot,Three‐component Synthesis of Novel Bis‐heterocycles Incorporating 5H‐chromeno[2,3‐b]pyridine‐3‐carbonitrile Derivatives

Novel bis‐chromeno[2,3‐b ]pyridine derivatives were synthesized with good yields by a clean and efficient methodologies involving one‐pot three‐component synthesis of bis‐aldehydes, malononitrile dimer, and dimedone in the presence of piperidine as a catalyst in EtOH. Depending on the length and position of the spacer in the bis‐aldehyde derivatives 1 , the reactions proceeded to give either the bis(2,4‐diamino‐tetrahydro‐5H‐chromeno[2,3‐b ]pyridine‐3‐carbonitriles) 4 or bis(4‐amino‐2,6‐dioxo‐hexahydro‐2H‐chromeno[2,3‐b ]pyridine‐3‐carbonitriles) 5 . All of the new compounds have been characterized by spectral data.     

Synthesis and tuberculostatic activity of novel N′‐methyl‐4‐(pyrrolidin‐1‐yl)picolinohydrazide and N′‐methylpyrimidine‐2‐carbohydrazide derivatives

The synthesis of N′‐methyl‐4‐(pyrrolidin‐1‐yl)picolinohydrazide and N′‐methyl‐pyrimidine‐2‐carbohydrazide derivatives ( 5a and 5b ) was carried out. These compounds were used as starting materials to obtain methyl N′‐methylhydrazinecarbodithioates 6a and 6b , which, on reaction with either triethylamine or hydrazine, gave corresponding 1,3,4‐oxadiazioles 7a and 7b or 1,2,4‐triazoles 9a and 9b with the free NH₂ group at the N‐4 position, respectively. Compounds 8a – e , particularly containing cyclic amines at N‐4 of the 1,2,4‐triazole ring, were also obtained. Synthesized compounds were tested in vitro for their activity against Mycobacterium tuberculosis. The structure–activity relationship analysis for obtained compounds was done. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:223–230, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21008     

One‐pot Synthesis of Novel 2,8‐dithioxopyrano[2,3‐d:6,5‐d′]dipyrimidine‐4,6(1H)‐dione Catalyzed by p‐Toluenesulfonic Acid

Novel 2,8‐dithioxopyrano[2,3‐d:6,5‐d′]dipyrimidine‐4,6(1H)‐dione derivatives were synthesized by a clean and efficient methodologies involving one‐pot regioselective and chemoselective reactions between two moles substituted thiobarbituric acid and 1 mol various aromatic aldehydes in the presence of p‐toluenesulfonic acid as a catalyst in EtOH with good yields in compression with alternative conditions such as microwave and promoted ultrasound. All of the compounds have been characterized by IR, ¹H NMR, ¹³C NMR spectral data, and elemental analyses.     

Quantum chemical calculation of exchange interactions in supramolecularly arranged N,N′‐dioxy‐2,6‐diazaadamantane organic biradical

Quantum mechanical exchange effects in purely organic N,N′‐dioxy‐2,6‐diazaadamantane biradical derivatives with promesogenic substituents have been studied. To determine intermolecular exchange energies, packing conditions of the radical core units in layered liquid crystalline phases are simulated using the Gaussian 09 program. The broken symmetry approach gives J ≈ 7 cm^?1 for intramolecular ferromagnetic exchange interactions between nitroxyl radical centers in one molecule. Both ferromagnetic and antiferromagnetic intermolecular interactions are possible in this kind of systems according to the obtained calculation results. Depending on the mutual positioning and orientation of molecules, the intermolecular antiferromagnetic exchange constant can reach a value of ?50 cm^?1, and the intermolecular ferromagnetic constant a value of 10 cm^?1. The simultaneous presence of intramolecular and intermolecular exchange between spin‐carrying centers in this kind of supramolecularly ordered multispin systems is favorable for the formation of magnetically interacting chains and two‐dimensional networks. © 2016 Wiley Periodicals, Inc.     

Mononuclear Carbene Dithiolate [Ni(NHX)(′S2C ′)] Complexes with HNX = HNPiPr3 or HNSPh2 Coligands (′S2C ′ 2– = 1,3‐ImidazolidinylN,N′‐bis(2‐benzenethiolate)(2–))

Cleavage reactions of the dinuclear [{Ni(′S₂C ′)}₂] · DMF (′S₂C ′ ^2– = 1,3‐imidazolidinyl‐N,N′‐bis(2‐benzenethiolate)(2–)) with HNPiPr₃ or HNSPh₂ yielded the mononuclear complexes [Ni(NHPiPr₃)(′S₂C ′)] ( 1 ) and [Ni(NHSPh₂)(′S₂C ′)] ( 2 ) which have been completely characterized. The nickel‐carbene‐dithiolate [Ni(′S₂C ′)] moiety is one of the very rare complex fragments that are able to coordinate both HNPR₃ or HNSR₂. IR spectra and X‐ray structure determinations show that 1 and 2 exhibit intramolecular N–H…S(thiolate) hydrogen bonds. Geometric parameters and NMR spectroscopic data of 1 and 2 are compatible with N–X single bonds and ylidic structures of the HNPiPr₃ and HNSPh₂ ligands. Comparison of Ni–N distances in diamagnetic and paramagnetic [Ni(NHSPh₂)] complexes was rendered possible through the X‐ray structure determination of the homoleptic [Ni(NHSPh₂)₆]Cl₂ ( 3 ) which formed as minor by‐product in the synthesis of 2 .     

A Novel and Efficient Synthesis of 3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐ones (=3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐1‐benzopyran‐2‐ones)

An efficient one‐pot synthesis of 3‐[(4,5‐dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐one (=3‐[(4,5‐dihydro‐1H‐pyrrol‐3yl)carbonyl]‐2H‐1‐benzopyran‐2‐one) derivatives 4 by a four‐component reaction of a salicylaldehyde 1 , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, a benzylamine 2 , and a diaroylacetylene (=1,4‐diarylbut‐2‐yne‐1,4‐dione) 3 in EtOH is reported. This new protocol has the advantages of high yields (Table), and convenient operation. The structures of these coumarin (=2H‐1‐benzopyran‐2‐one) derivatives, which are important compounds in organic chemistry, were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

Synthesis,one‐ and two‐photon properties of poly[9,10‐bis(3,4‐bis(2‐ethylhexyl‐oxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐/2,7‐carbazolevinylene]

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of two novel 2,6‐anthracenevinylene‐based copolymers, poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐carbazolevinyl‐ene] ( P1 ) and poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinyl‐ene‐alt‐N‐octyl‐2,7‐carbazolevinylene] ( P2 ) were reported. The as‐synthesized polymers have the number‐average molecular weights of 1.56 × 10⁴ for P1 and 1.85 × 10⁴ g mol^?1 for P2 and are readily soluble in common organic solvents. They emit strong bluish‐green one‐ and two‐photon excitation fluorescence in dilute toluene solution (? _P1 = 0.85, ? _P2 = 0.78, λ_em( P1 ) = 491 nm, λ_em( P2 ) = 483 nm). The maximal TPA cross‐sections of P1 and P2 measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses in toluene are 840 and 490 GM per repeating unit, respectively, which are obviously larger than that (210 GM) of poly[9,10‐bis‐(3,4‐bis(2‐ethylhexyloxy) phenyl)‐2,6‐anthracenevinylene], indicating that the poly(2,6‐anthracenevinylene) derivatives with large TPA cross‐sections can be obtained by inserting electron‐donating moieties into the polymer backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 463–470, 2010     

Ultrasound‐Promoted Catalyst‐Free Synthesis of 2,2′‐(1,4‐Phenylene)bis[1‐acetyl‐1,2‐dihydro‐4H‐3,1‐benzoxazin‐4‐one] Derivatives

A convenient approach to 2,2′‐(1,4‐phenylene)bis[1‐acetyl‐1,2‐dihydro‐4H‐3,1‐benzoxazin‐4‐one] derivatives 4 was explored employing the one‐pot condensation of anthranilic acids (=2‐aminobenzoic acids) 1 with terephthalaldehyde (=benzene‐1,4‐dicarboxaldehyde; 2 ) under ultrasound‐irradiation conditions (Scheme 1). The reactions proceeded smoothly in the presence of excess Ac₂O in the absence of any other catalyst and solvent to afford the respective products in high yields.