基于石墨烯修饰的分子印迹膜丝网印刷电极快速测定烟草中苯霜灵农药残留

建立了一种基于石墨烯修饰的分子印迹膜丝网印刷电极快速检测烟草样品中苯霜灵的电化学分析法。利用石墨烯的信号放大作用,结合分子印迹技术,以丙烯酰胺为功能单体,苯霜灵(Ben)为模板分子,在石墨烯修饰的丝网印刷电极表面,通过紫外引发聚合形成能识别苯霜灵分子的印迹敏感膜,采用循环伏安法、差分脉冲伏安法研究了印迹膜的结构、性能和分子印迹效应。该传感器对Ben的检测浓度范围为7.0×10~(–9)～6.8×10~(–4) mol/L,Ben的检出限为2.1×10~(–9) mol/L,测定结果的相对标准偏差不大于3.21%(n=5),加标回收率为101.7%～110.4%。该方法可用于烟草中苯霜灵的测定。     

基于分子印迹膜的检测牛奶中琥珀酸氯霉素残留传感方法的研究

采用光聚合法在一次性丝网印刷电极上制备琥珀酸氯霉素分子印迹膜,然后将丝网印刷电极通过电极插口与电化学分析装置相连接,组装成检测琥珀酸氯霉素残留的电化学传感仪.使用与传感装置相连接的记录仪记录响应的结果.采用本传感仪建立了检测氯霉素的标准曲线并测试了实际牛奶样品中氯霉素含量.电镜学观察表明,与非印迹膜相比,在印迹膜表面形成大量直径约为100 nm的印迹微孔.本传感仪装置检测琥珀酸氯霉素具有很高的灵敏度和特异性,检出限为2×10-9 mol/L,检测线性范围为1×10-8～1.2×10-5 mol/L,基于牛奶样品的检测回收率介于93.5%～95.5%之间.     

检测猪肉中地西泮的分子印迹仿生传感器的研制

在一次性丝网印刷电极上原位制备地西泮的分子印迹膜,将丝网印刷电极通过电极插口与便携式电导仪相连接,组装成检测地西泮残留的电导型传感器,建立了检测地西泮的标准曲线并测试了实际肉类样品中的地西泮含量.通过扫描电镜分析了该膜的表征,与非印迹膜相比,印迹膜表面形成了大量印迹微孔.本传感器装置对地西泮具有很高的灵敏度和特异性,检出限为0.008 mg/L,线性范围为0.039～1.25 mg/L,基于肉品的检测回收率为91.3%～95.0%,可实现现场快速检测.     

基于纳米材料增效的2,6-二叔丁基对甲酚分子印迹电化学传感器的研究及应用

以2,6-二叔丁基对甲酚(BHT)为模板分子,以邻氨基苯硫酚功能化的纳米金为功能单体制备分子印迹聚合物。利用表面修饰技术,将石墨烯和所制备的分子印迹聚合物修饰至电极表面构建基于纳米材料增效的分子印迹电化学传感器。在优化条件下,该传感器的线性检测范围为5×10–6~1×10–2 mol/L,最低检测限为1.56×10–6 mol/L,5次重复测定结果的相对标准偏差为4.6%,样品加标回收率为96.5%~104.0%。该分子印迹电化学传感器能够实现对BHT的特异性识别,具有良好的重复性和稳定性,可用于实际样品检测。     

多壁碳纳米管-分子印迹传感器测定盐酸克伦特罗

结合碳纳米材料和分子印迹技术,建立了以K3[Fe(CN)6]为探针测定盐酸克伦特罗的方法。以邻苯二胺为功能单体,盐酸克伦特罗为模板,采用电化学聚合法在多壁碳纳米管修饰电极表面制备了分子印迹薄膜。用乙腈水溶液可快速去除模板,得到多壁碳纳米管-分子印迹传感器。用循环伏安法、交流阻抗法和石英晶体微天平技术对印迹膜进行了表征,膜厚为12.3 nm。K3[Fe(CN)6]的相对峰电流与盐酸克伦特罗的浓度在4.0×10-8～6.6×10-6 mol/L范围内呈线性关系,检测限为8.1×10-9 mol/L。选择性实验表明传感器对结构类似物具有较强的抗干扰能力。此传感器可用于猪肉中盐酸克伦特罗的测定,加标回收率为101.3%～107.9%。     

基于石墨烯的毒死蜱分子印迹电化学传感器的制备及对毒死蜱的测定

利用分子印迹技术,以马来松香丙烯酸乙二醇酯为交联剂,使用自由基热聚合法在石墨烯修饰的玻碳电极表面合成毒死蜱( CPF)分子印迹聚合膜,制得了CPF分子印迹电化学传感器。采用循环伏安法、线性扫描伏安法和电化学交流阻抗法等,考察了此CPF分子印迹膜的电化学性能。在最佳检测条件下,传感器的峰电流与CPF浓度在2.0×10-7~1.0×10-5mol/L范围内呈线性关系,线性方程为Ip(μA)=-7.1834-0.2424C (μmol/L),相关系数r2=0.9959,检出限为6.7×10-8 mol/L(S/N=3)。构建了CPF分子印迹电化学传感器的动力学吸附模型,测得印迹传感器的印迹因子β=2.59,结合速率常数k=12.2324 s。传感器表现出良好的重现性和稳定性,并成功用于实际水样和蔬菜样品中CPF的测定,加标回收率为94.1%~101.4%。     

水杨酸分子印迹膜电化学传感器的制备

以水杨酸为模板分子,采用循环伏安法电聚合形成聚吡咯膜,以固定电位过氧化法去除印迹分子,制备了水杨酸分子印迹膜电极.本印迹电极能促进水杨酸电氧化过程,有效地避免结构类似物(如苯甲酸)对其测定的干扰.循环伏安法用于电化学检测,当富集时间为10 min,磷酸盐缓冲溶液的pH=6.86 时,在1.0×10-6～2.0×10-3 mol/L浓度范围内,水杨酸氧化峰电流与其浓度呈良好的线性关系,检出限为0.8 μmol/L, 用分子印迹膜电极对加标样品进行分析,回收率为94.6%～103.4%.     

Au-Pd合金纳米管修饰的尼古丁分子印迹膜传感器的研究

基于Au-Pd合金修饰的玻碳电极为工作电极,采用循环伏安法将邻氨基酚与尼古丁电沉积在工作电极上,制备了尼古丁分子印迹膜传感器。采用差分脉冲伏安法研究尼古丁在尼古丁分子印迹膜传感器上的电化学行为,考察了模板溶解时间、富集时间和溶液pH值对尼古丁测定的影响。在优化实验条件下,尼古丁分子印迹膜传感器的线性范围为1.2×10~(-7)~2.5×10~(-3) mol/L,检出限为4.6×10~(-8) mol/L。用该传感器对吸烟者血液中尼古丁的含量进行检测,结果表明,该传感器具有灵敏度高、线性范围宽、重现性及稳定性好等优点。     

碱性橙Ⅱ印迹传感器的制备及其应用

以纳米石墨烯和纳米银作为修饰材料修饰工作电极,制备一种以碱性橙Ⅱ为模板分子,邻氨基苯酚和邻苯二胺为复合功能单体的新型快速检测碱性橙Ⅱ的印迹传感器。运用紫外光谱法选择最佳功能单体,并研究了模板分子与功能单体之间的作用形式和作用强度,采用电化学分析法优化各种制备条件,用甲醇?0.4 mol/L NaOH水溶液（体积比2∶1）洗脱模板分子,得到分子印迹电极,并对印迹电极的分析性能进行了研究。实验结果表明,该印迹传感器对碱性橙Ⅱ具有高选择性,样品加标平均回收率为88.45%～101.40%,相对标准偏差（RSD）在1.31%～2.83%之间（n=5）,线性范围为3.0×10^-9～5.0×10^-5 mol/L,检出限为1.0×10^-9 mol/L。该传感器成功应用于食品中碱性橙Ⅱ残留的快速检测。     

自组装分子印迹单层膜修饰电极对L-丝氨酸的检测

以电沉积多孔金膜为基底,L-丝氨酸为模板分子,L-半胱氨酸为功能单体构建了信号放大的自组装分子印迹单层膜修饰电极.电极对L-丝氨酸浓度响应的线性范围为5.0×10-6～2.0×10-4 mol/L,检出限为4.8×10-7 mol/L,灵敏度为215 mA·L·mol-1.由于多孔金膜有效增加了模板分子的固定量,印迹电极响应性能较无多孔金膜修饰的印迹电极有明显提高.     

Construction of a novel electrochemical sensor based on molecularly imprinted polymers for the selective determination of chlorpyrifos in real samples

We present a novel electrochemical sensor based on an electrode modified with molecularly imprinted polymers for the detection of chlorpyrifos. The modified electrode was constructed by the synthesis of molecularly imprinted polymers by a precipitation method then coated on a glassy carbon electrode. The surface morphology of the modified electrode was characterized by using field‐emission scanning electron microscopy and transmission electron microscopy. The performance of the imprinted sensor was thoroughly investigated by using cyclic voltammetry and differential pulse voltammetry. The imprinted electrochemical sensor displayed high repeatability, stability, and selectivity towards the template molecules. Under the optimal experimental conditions, the peak current response of the imprinted electrochemical sensor was linearly related to the concentration of chlorpyrifos over the range 1 × 10⁻¹⁰–1 × 10⁻⁵ mol/L with a limit of detection of 4.08 × 10⁻⁹ mol/L (signal‐to‐noise ratio = 3). Furthermore, the proposed molecularly imprinted electrochemical sensor was applied to the determination of chlorpyrifos in the complicated matrixes of real samples with satisfactory results. Therefore, the molecularly imprinted polymers based electrochemical sensor might provide a highly selective, rapid, and cost‐effective method for chlorpyrifos determination and related analysis.     

Selective Electrochemical Determination of Salicylic Acid in Wheat Using Molecular Imprinted Polymers

Salicylic acid is a phytohormone, playing crucial roles in signal transduction, crop growth, and development, and defense to environmental challenges. In this study, a highly selective electrochemical sensor was designed and used to determine salicylic acid using molecularly imprinted polymers for recognition. The electrochemical sensor was fabricated via stepwise modification of gold nanoparticle–graphene–chitosan and molecularly imprinted polymers on a glassy carbon electrode. With electrochemical deposition, a gold nanoparticle–graphene–chitosan film was deposited on the glassy carbon electrode and enhanced the sensitivity. Molecularly imprinted polymers with adsorbed template salicylic acid were added to the surface of the modified electrode. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the modified electrodes. Salicylic acid in wheat was quantified by the sensor using the molecularly imprinted polymer/gold nanoparticle–graphene–chitosan/glassy carbon electrode. Concentrations of salicylic acid from 5?×?10^?10 to 5?×?10^?5?mol?L^?1 were determined showing that the developed sensor was suitable for the analysis of food.     

安定分子印迹聚合物的制备及应用

以安定为模板分子,通过本体聚合和沉淀聚合的方法合成了分子印迹聚合物材料,考察了交联剂、致孔剂及温度等条件对聚合物材料性能的影响。电镜扫描图片显示本体聚合得到的聚合物呈不规则形状,而沉淀聚合得到的则是微球颗粒,形状规则。吸附实验表明,聚合物微球对安定的最大吸附量约为130μg/g,对奥沙西泮和硝西泮的吸附量约为110μg/g,对安定类化合物具有较高的吸附性能和选择性。通过对比合成现象和聚合物性能,最终选用以DVB为交联剂、乙腈为致孔剂合成的聚合物微球为固相萃取材料填充固相萃取小柱,从饲料及猪尿样品中选择性地分离、富集痕量安定类药物。结合高效液相色谱法检测,奥沙西泮、硝西泮和安定3种药物在0.1～20 mg/L范围内线性良好,相关系数为0.999 6～0.999 9,检出限(S/N=3)为0.03～0.08 mg/L,加标回收率为66%～79%。该方法为安定类药物的检测提供了一种新途径。     

自组装碳纳米管-氯洁霉素分子印迹溶胶-凝胶电化学传感器研究

结合自组装技术, 采用电聚合方法在碳纳米管修饰金电极表面制备对氯洁霉素具有特异性识别位点的分子印迹溶胶-凝胶薄膜, 成功构建了一种新型印迹溶胶-凝胶电化学传感器. 通过循环伏安法(CV)、示差脉冲法(DPV)、安培计时法(I-t)和扫描电镜(SEM)表征了该印迹溶胶-凝胶膜的电化学性能和表面形貌. 结果表明, 该传感器具有良好的选择性和灵敏度, 氯洁霉素在多壁碳纳米管修饰的印迹溶胶-凝胶传感器上的响应明显提高. 该印迹溶胶-凝胶传感器对氯洁霉素的浓度响应线性范围为5.0×10^-7~8.0×10^-5 mol/L, 检出限为2.44×10^-8 mol/L. 该传感器被成功地用于人体尿液中氯洁霉素的分析测定.     

Molecularly Imprinted Polypyrrole for DNA Determination

In this study graphite electrodes modified by a thin DNA‐imprinted polypyrrole layer, which was able to bind specific target‐DNA, are reported. For this aim, electrochemical synthesis of polypyrrole was performed on a pencil graphite electrode by cyclic voltammetry (CV) or by potential pulse sequences (PPS). The modified electrode surface was used for electrochemical determination of target‐DNA by differential pulse voltammetry. According to our best knowledge this is a first report on the application of DNA‐imprinted polymer for the determination of target‐DNA. The results showed that the molecularly imprinted polypyrrole (MIPPy) layer that formed on the carbon electrode surface was sensitive for target‐DNA, while the nonimprinted polypyrrole layer was not sensitive to the same target‐DNA. Comparison of electrodes modified using PPS and CV techniques is presented.     

Determination of Oxytetracycline with a Gold Electrode Modified by Chitosan-Multiwalled Carbon Nanotube Multilayer Films and Gold Nanoparticles

A molecularly imprinted electrochemical sensor was fabricated based on a gold electrode modified by chitosan-multiwalled carbon nanotube composite (CS-MWCNTs) multilayer films and gold nanoparticles (AuNPs) for convenient and sensitive determination of oxytetracycline (OTC). The multilayer of CS-MWCNTs composites and AuNPs were used to augment electronic transmission and sensitivity. The molecularly imprinted polymers (MIPs) were synthesized using OTC as the template molecule and o-phenylenediamine (OPD) as the functional monomer. They were modified on a gold electrode by electropolymerization. The electrochemical behavior of OTC at the imprinted sensor was characterized by cyclic voltammetry (CV), scanning electron microscopy (SEM), and amperometry. The molecularly imprinted sensor showed high selectivity and excellent stability toward OTC. The linear range was from 3.0 × 10^?8 to 8.0 × 10^?5 mol/L, with a limit of detection (LOD) of 2.7 × 10^?8 mol/L (S/N = 3). The developed sensor showed good recovery in spiked samples analysis.     

Uniform-sized molecularly imprinted polymer for (S)-naproxen selectively modified with hydrophilic external layer.

A uniform-sized molecularly imprinted polymer (MIP) for (S)-naproxen selectively modified with hydrophilic external layer has been prepared. First, the molecularly imprinted polymer for (S)-naproxen was prepared using 4-vinylpyridine and ethylene glycol dimethacrylate (EDMA) as a functional monomer and cross-linker, respectively, by a multi-step swelling and thermal polymerization method. Next, a 1:1 mixture of glycerol monomethacrylate (GMMA) and glycerol dimethacrylate (GDMA) was used for hydrophilic surface modification, and it was added directly to the molecularly imprinted polymer for (S)-naproxen 4 h after the start of molecular imprinting. The retention factors of all solutes tested were decreased with the surface modified molecularly imprinted polymer, compared with the unmodified molecularly imprinted polymer. However, chiral recognition of racemic naproxen was attained with the surface modified molecularly imprinted polymer as well as the unmodified molecularly imprinted polymer. Further, bovine serum albumin was completely recovered from the surface modified molecularly imprinted polymer. These results revealed that the chiral recognition sites of (S)-naproxen remained unchanged with hydrophilic surface modification, and that the molecularly imprinted polymer for (S)-naproxen was selectively modified with hydrophilic external layer. Preliminary results reveal that the surface modified molecularly imprinted polymer could be applicable to direct serum injection assays of (S)-naproxen.     

基于纳米材料修饰的高灵敏性L-苯丙氨酸印迹溶胶-凝胶传感器的研究

将氧化锌纳米膜(ZnO-NFs)、多壁碳纳米管(MWNTs)、纳米铜颗粒(Cu-NPs)和印迹溶胶-凝胶聚合物(MIP)依次修饰到碳电极(CE)表面,制备了一种对L-苯丙氨酸具有特异识别能力的印迹电化学传感器.采用电子扫描显微镜(SEM)对各修饰电极进行形貌表征;采用循环伏安法(CV)、示差脉冲伏安法(DPV)、安培时...     

Capacitive Chemical Sensor for Thiopental Assay Based on Electropolymerized Molecularly Imprinted Polymer

A novel capacitive sensor based on electropolymerized molecularly imprinted polymer (MIP) for thiopental detection is described. The molecularly imprinted film as a recognition element was prepared by electropolymerization of phenol on a gold electrode in the presence of thiopental (template). Cyclic voltammetry and capacitive measurements were used for characterization and evaluation of the polymeric film. The template molecules were removed from the modified electrode surface by washing with an ethanol:water solution. The sensor’s linear response range was between 3 and 20 µM, with a detection limit of 0.6 µM. The proposed sensor exhibited good selectivity, reproducibility. Satisfactory results were obtained in the direct detection of real samples.     

对羟基苯甲酸酯分子印迹电化学传感器的研制

利用分子印迹技术,以对羟基苯甲酸乙酯为模板分子,甲基丙烯酸为单体,在玻碳电极表面原位聚合分子印迹聚合物敏感膜.采用方波伏安法对对羟基苯甲酸乙酯在该印迹电极上的电化学行为进行了研究,当响应时间为15 min时,0.95 V(vs SCE)处的峰电流与对羟基苯甲酸乙酯的浓度在2.0×10-6 ～2.0×10-4 mol/L范围内呈线性关系,检出限(S/N=3)为1.0 μmol/L,而相同条件下,对羟基苯甲酸乙酯在控制电极上的响应非常小并对浓度变化不灵敏;同时在印迹电极上氧化峰电位较在裸电极上发生了微弱正移.同一支印迹电极对对羟基苯甲酸乙酯响应值的RSD为4.3%(n=10).该印迹电极对尼泊金酯类具有良好的选择性,对对羟基苯甲酸甲酯、丙酯以及丁酯的选择性系数分别为1.89、1.70和2.01;对结构相似的苯酚、对羟基苯甲酸、对氨基苯甲酸等响应不灵敏,对结构差异较大的如维生素C等几乎无响应.用该分子印迹电极对实际样品进行分析,加标回收率大于90%.