Trace determination of uranium in fertilizer samples by total reflection X-ray fluorescence

Uranium is reported to be present in phosphate fertilizers. The recovery of uranium from the fertilizers is important because it can be used as fuel in nuclear reactors and also because of environmental concerns. For both these activities suitable method of uranium determinations at trace levels in these fertilizers are required. Studies have been initiated for such TXRF determination of uranium and the results are reported in the present paper. For TXRF determinations the fertilizer samples were processed with nitric acid and the uranium present in it was removed by solvent extraction using tri-n-butyl phosphate as the extractant. The organic phase containing uranium was equilibrated with 1.5% suprapure nitric acid to bring out uranium in aqueous phase. This aqueous phase was mixed with internal standard Y and the TXRF spectra were measured by depositing samples on float glass supports. The amounts of uranium in four fertilizer samples of Hungarian origin were determined by processing these TXRF spectra. Uranium concentrations in two fertilizer samples were found to be in the range of 4–6 μg/g, whereas two fertilizer samples did not show the presence of uranium. The precision of the TXRF determination of uranium was found to be better than 8% (1σ).     

Mercury in archeological hair samples from Xiongnu burials (Noin‐Ula,Mongolia): SR XRF and CXRM analysis

A technique has been developed for determining mercury content in the concentration range of 1–1000 μg/g in hair samples by X‐ray fluorescence analysis using synchrotron radiation (synchrotron radiation X‐ray fluorescence, Siberian Synchrotron and Terahertz Radiation Center, Budker Institute of Nuclear Physics SB RAS). The mercury content was identified in archeological hair samples from an ancient burial of Xiongnu nobility (Mongolia, mound 22, 1^st century BC–1^st century AD); the content values were elevated (up to 1100 μg/g) in all the samples (n = 41). An X‐ray microanalysis using polycapillary lenses in a confocal scheme (confocal X‐ray microscopy station) was developed at the Synchrotron radiation X‐ray fluorescence to establish mercury distribution in a cross section of hair shaft with a spatial resolution of 5 μm. The findings of the study make it possible to assume exogenous income of mercury (from the burial environment) to the hair.     

Application of total reflection X-ray fluorescence spectrometry for trace elemental analysis of rainwater

Applicability of total reflection X-ray fluorescence (TXRF) spectrometry for trace elemental analysis of rainwater samples was studied. The study was used to develop these samples as rainwater standards by the National University of Singapore (NUS). Our laboratory was one of the participants to use TXRF for this study. The rainwater sample obtained from NUS was analysed by TXRF and the trace elements Mn, Fe, Ni, Cu, Zn, V and Pb were determined as required by the NUS. The average precision was found to be within 16% and the TXRF-determined elemental concentrations of these elements were below 20 μg/l. The average deviation of TXRF-determined values from the certified values were 20% (excluding the deviation for Fe and V which were comparatively high). Apart from the above elements, S, K, Ca, Rb, Sr, Ba and Br were also determined by TXRF and were found to be in the range of 0.2 to 191 μg/l. TXRF-determined values of our laboratory played an important role in the certification of concentration of seven elements in this rainwater sample which was later developed as a rainwater standard.     

The quantification of total lead in lipstick specimens by total reflection X‐ray fluorescence spectrometry

Lipstick is known to contain lead, and this has been a general area of concern. Methods of quantifying lead in lipstick currently require the use of rather harsh digestion procedures given that lipstick specimens are high in their lipid content and contain many refractory materials. A simple method of performing lead analysis in lipstick specimens based on total reflection X‐ray fluorescence spectrometry (TXRF) is presented here. Samples were prepared by melting lipstick specimens along with a non‐ionic surfactant and an yttrium internal standard followed by homogenization. Solid prepared samples were then finely streaked directly onto a quartz reflector, and TXRF measurements made for 900‐s live time. The method was found to produce a mean limit of detection for lead of 0.04μg/g. Precisions were found to be on the order of 11–38% relative standard deviation (RSD) and apparent recoveries for lead between 92% and 106% (n = 8). Although the spreading technique may result in thickness variations that may contribute to the higher than expected variances about the determined lead concentrations, the method presented in this work does show promise as a means of performing routine lead analysis in lipstick specimens without the need for harsh digestion procedures. Copyright © 2015 John Wiley & Sons, Ltd.     

A total reflection X‐ray fluorescence method for the determination of chlorine at trace levels in nuclear materials without sample dissolution

A total reflection X‐ray fluorescence (TXRF) method for the determination of chlorine at trace levels in nuclear fuel samples is described. Chlorine present in trace concentrations in nuclear fuel materials such as U₃O₈, (U,Pu)C, PuO₂ and Pu‐alloys was first separated from the solid matrix by pyrohydrolysis as HCl and was collected in 5 mM NaOH solution. This solution was analyzed for chlorine by TXRF spectrometry using Cl Kα analytical line excited by W Lα. Cobalt was used as internal standard. The precision for such chlorine determination was found to be within 27% (n = 4) when the analysis was carried out in air atmosphere. This could be improved to 8% by making TXRF measurement in flowing helium atmosphere. The results obtained from TXRF determinations were also compared with those obtained from ion chromatography (IC) and were in good agreement. The collection of distillate during pyrohydrolysis in NaOH helped in counterchecking loss of chlorine during TXRF sample preparation. The average deviation of TXRF‐determined values in helium‐purged TXRF measurements with IC determined values (as chloride) was 15% at a chlorine concentration level in the range of 1–70 µg/mL. Copyright © 2012 John Wiley & Sons, Ltd.     

First Derivative Synchronous Fluorescence Spectroscopy for the Simultaneous Determination of Sulpiride and Mebeverine Hydrochloride in Their Combined Tablets and Application to Real Human Plasma

A rapid, simple and highly sensitive first derivative synchronous fluorometric method has been developed for the simultaneous analysis of binary mixture of sulpiride (SUL) and mebeverine hydrochloride (MEB). The method is based upon measurement of the synchronous fluorescence intensity of these drugs at ∆λ = 100 nm in water. The different experimental parameters affecting the fluorescence of the two drugs were carefully studied and optimized. The fluorescence-concentration plots were rectilinear over the range of 0.05–1 μg/mL and 0.2–3.2 μg/mL for SUL and MEB respectively with lower detection limits (LOD) of 0.006 and 0.01 μg/mL and quantification limits (LOQ) of 0.0.02 and 0.05 μg/mL for SUL and MEB, respectively. The proposed method was successfully applied for the determination of the two compounds in synthetic mixtures and in commercial tablets. The high sensitivity attained by the proposed method allowed the determination of both of SUL and MEB metabolite (veratic acid) in real human plasma samples applying second derivative synchronous fluorometric technique. The mean% recoveries (n = 3) for both MEB metabolite (veratic acid) and SUL were 99.82 ± 2.53 and 98.84 ± 6.20 for spiked human plasma respectively, while for real human plasma, the mean% recoveries (n = 3) were 91.49 ± 4.25 and 91.36 ± 8.46 respectively.     

Magnetic nanoparticles as sorbent for preconcentration and determination of lead in fish and water samples

In the present work, a procedure for the preconcentration and determination of lead trace amounts of lead in fish species and water samples by graphite furnace atomic absorption spectrometry (GF AAS) is proposed, which is based on the batch solid phase extraction of lead ions by modified magnetic nanoparticles. An optimization process was performed using two-level fractional factorial designs (2^4-1) and a Box–Behnken matrix. Four variables (pH of solution, nanoparticles mass, morin mass, and shaking time) were regarded as factors in the optimization. The detection limit of the proposed method was found to be 81.0 ng/l. Six samples of fish and three samples of water (tap, river, and lake) were analyzed for lead. The lead contents ranged in fish from 0.013 to 0.038 μg/g and in water from 7.1 to 9.0 μg/l.     

Trace determination of uranium preconcentrated using graphene oxide by total reflection X-ray fluorescence spectrometry

A new method based on dispersive microsolid phase extraction using graphene oxide (GO) as a solid adsorbent and total reflection X-ray fluorescence (TXRF) spectrometry is proposed for trace determination of uranium. In the developed methodology, a suspension of GO was injected into uranium-spiked multielement solutions including rubidium; after filtration, the membrane filter with collected GO was placed in a small volume of internal standard acid solution and the eluent containing uranium was deposited onto a fluorine resin-coated slide glass, which is a disposable sample stage. Using GO was effective for removal of rubidium from the measurement solution to avoid interference between Rb Kα peak and U Lα peak. The high enrichment factor of 150 enables obtaining uranium detection limits of 0.042, 0.087, and 0.12 μg L⁻¹ for ionic strength of 0.01, 0.1, and 1 mol L⁻¹, respectively. Such low detection limits were obtained by using a benchtop TXRF spectrometer with 5-min measurement. The proposed method is suitable for trace uranium determination in water, including high salinity samples.     

Synthesis of Functionalized ZnSe Nanoparticles and Their Applications in the Determination of Bovine Serum Albumin

Luminescent quantum dots (QDs)-semiconductor nanocrystals were promising alternative to organic dyes for fluorescence-based applications. In this paper, we developed procedures to use mercaptoacetic acid (MAA) to modify ZnSe nanoparticles and made the nanoparticles to be soluble for the quantitative and selective determination of bovine serum albumin (BSA). Maximum fluorescence intensity was produced at pH 7.0, with excitation and emission wavelengths at 242 and 348 nm, respectively. Under optimal conditions, the straight line equation: ^△ F = 0.38 + 0.34 C (μg/ml) was found between the relative fluorescence intensity and the concentration of BSA in the range of 9.6–124.8 μg/ml, and the limit of detection was 2 μg/ml.     

Flow injection determination of metoclopramide based on KMnO4—HCHO chemiluminescence in a micellar medium

A novel flow injection chemiluminescence (CL) analysis method for the determination of metoclopramide in the presence of sodium dodecyl sulfonate (SDS) surfactant micelles is described. This method is based on the luminescent properties of the KMnO₄-HCHO-metoclopramide in acid medium sensitized by SDS. The optimized experimental conditions were evaluated and the possible mechanism was discussed. The CL increase is linearly related to the concentration of metoclopramide in the range 0-80.0 μg/ml with a detection limit of 31.3 ng/mL (S/N=3).The relative standard deviation for 20.0 μg/ml samples was 2.6% (n=11). The proposed method has been successfully applied to the determination of metoclopramide in tablets.     

TXRF spectrometry in the bioanalytical sciences: A brief review

This work describes the basic principles of Total-reflection X-Ray Fluorescence (TXRF) spectrometry and some of its most outstanding applications for investigating metal traces, mainly in biological and biomedical samples. TXRF is an analytical technique that combines the versatility of elemental analysis by X-ray energy dispersion with a low detection limit in the order of picograms of absolute mass or a few ppb (μg L⁻¹) as concentration. The microanalytical capacity of TXRF allows the study of small sample quantities. The TXRF can perform qualitative and mass ratio analyses of the elements present in a sample of only a few hundred nanograms. These properties are of great importance in the research of metal traces in biological systems, as they allow fast, precise, and accurate characterisation of the elemental fingerprint at trace level. Its successful application in studies of the coordination kinetics of new platinum-based antitumor drugs with DNA, its application in the study profile of the metal in healthy and cancerous human tissues, or even its application in the study of the processes of metal diffusion through cell membranes are just a few examples of TXRF capabilities in the biomedical sciences. This brief review's main objective is to provide an overview of the physical principles and possibilities of TXRF spectrometry. It also highlights some of the most outstanding applications that have been developed so far, mainly in the biological field, so that the reader can evaluate their potential applications.     

Online Monitoring of Bromate in Ozonized Water Without a Previous Separation Process

The use of ozonation for the purification of drinking water can lead to the formation of bromate. The US Environmental Protection Agency and the European Directive for human drinking water has lowered the regulatory level for bromate down to 10 μg l⁻¹, such that methods must be developed for monitoring the formation of bromate, particularly in on-site situations. In the present work we report a fluorometric method for the determination of bromate based on the reaction with carbostyril-124, a compound that shows florescence mainly at pH values above 4 and, when bromated, generates a non-fluorescent product. The reaction can thus be used as an indirect method for determination of the ion. The proposed method, which uses the flow injection (FI) technique, allows online application and kinetic control of the variables affecting the process, together with shorter reaction times, and it provides maximum sensitivity and selectivity. Under optimum conditions, it is possible to determine the analyte within the 4–200 μg l⁻¹ range, with a limit of detection of 0.9 μg l⁻¹ and a relative standard deviation (n = 12, [] = 5 and 30 μg l⁻¹) of 3.2% and 2.6% respectively. The determination rate was ten samples per hour.     

Spectrofluorometric Determination of Methocarbamol in Pharmaceutical Preparations and Human Plasma

A simple, sensitive and rapid spectrofluorometric method for determination of methocarbamol in pharmaceutical formulations and spiked human plasma has been developed. The proposed method is based on the measurement of the native fluorescence of methocarbamol in methanol at 313 nm after excitation at 277 nm. The relative fluorescence intensity-concentration plot was rectilinear over the range of 0.05–2.0 μg/mL, with good correlation (r = 0.9999), limit of detection of 0.007 μg/ mL and a lower limit of quantification of 0.022 μg/ mL. The described method was successfully applied for the determination of methocarbamol in its tablets without interference from co-formulated drugs, such as aspirin, diclofenac, paracetamol and ibuprofen, The results obtained were in good agreement with those obtained using the official method (USP 30).The high sensitivity of the method allowed the determination of the studied drug in spiked human plasma with average percentage recovery of 99.42 ± 3.84.     

An Enhancement of Europium-/Gadolinium- Diphacinone -<Emphasis Type="Italic">DL</Emphasis>-Histidine- Cetylpyridine Bromide System for the Determination of Diphacinone in Serum

As one of the first generation anticoagulant rodenticide, diphacinone (DPN) was extensively used in China, and often occurred accidental and intentional intoxications. To meet the needs of clinical emergency rescue, a simple, rapid and sensitive method was necessary for the determination of DPN in serum. In this paper, a fluorimetric method using a ternary europium-gadolinium-DPN-DL-histidine-cetylpyridine bromide system was developed. The fluorescence intensity was measured with a 1 cm quartz cell at 335 nm excitation wavelength and 612 nm emission wavelength. The fluorescence intensity of the europium-DPN- DL- histidine complex system was further enhanced by using gadolinium ion (Gd³⁺) in a cetylpyridine bromide (CPB) colloid-type suspension. By adding Gd³⁺ at pH 8.5 to 9.5 in the presence of an ammonia-ammonium chloride buffer solution, about a 100-fold enhancement of the fluorescence intensity was achieved. The enhanced fluorescence intensity showed a good linear relationship with the DPN concentration from 0.01 mg/L to 5.0 mg/L. The limit of detection was 0.001 mg/L in serum. The established method was used to determine DPN in real human serum in clinical specimens. The luminescence mechanism was discussed in detail. In the fluorescence system of the europium-gadolinium-DPN-DL-histidine-CPB, the CPB not only acted as the surfactant but also acted as the energy donor.     

A Gas Diffusion Technique Coupled with Flow Injection Systems. Optimization of the Process in its Application to the Fluorimetric Determination of Ammonium in Water Samples

A novel flow injection-gas-diffusion (GD-FI) system has been developed for the on-line analysis of ammonium ion in waters with fluorimetric detection, using an acceptor solution containing the Eosin-Bluish (EB) acid-base indicator. This, together with optimization of the process of gas transfer through the membrane, increases the sensitivity of the method to a considerable extent. Under optimum conditions, it is possible to determine the analyte within the 0.02–1.5 mg l^-1 range, with a limit of detection of 5 μg l^-1 and relative standard deviations (n = 12, [NH₄⁺] = 50 μg l^-1 and 0.05 μg l^-1) of 3.4% and 3.0% respectively. The determination rate was 15 samples per hour.     

A Batch Chemiluminescence Determination of Enoxacin Using a Tris-(1,10-phenanthroline)ruthenium(II)–Cerium(IV) System

A batch type chemiluminescence (CL) determination of enoxacin is described. In this work, it was observed that enoxacin could enhance the chemiluminescence (CL) emission Ru(phen)₃ ²⁺–Ce(IV) system and this enhancement effect was dependent on the concentration of enoxacin, based on which, CL system was established for the determination of enoxacin. Under the optimum experimental conditions, the linear range and detection limit are 0.6406–64.06 μg/ml and 0.0210 μg/ml, respectively. The R.S.D. is 1.75%. (n=10). The proposed method has been applied to detect the content of enoxacin in pharmaceutical formulation and human serum with satisfactory results. The possible mechanism of the CL reaction was discussed.     

A New Spectrofluorimetric Method for Determination of Trace Amounts 5-Hydroxytryptamine in Human Urine and Serum

A new spectrofluorimetric method was developed for the determination of trace amount of 5-hydroxytryptamine (5-HT) in human urine and serum samples. In the NaAc-HAc buffer solution of pH=5.80, 5-HT can react with formaldehyde-acetylacetone system to form a new compound which sends yellow green fluorescence at 533nm and the enhanced fluorescence intensity is in proportion to the concentration of 5-HT. Optimum conditions for the determination of 5-HT were also investigated. The dynamic range and detection limit for the determination of 5-HT are 5.35×10⁻⁷∼1.07×10⁻⁴ mol/L and 2.08×10⁻⁷ mol/L, respectively. The developed method is simple, practical and can be successfully applied to determination of 5-HT in human urine and serum samples. Moreover, the enhancement mechanisms of the fluorescence intensity in the 5-HT - formaldehyde-acetylacetone system have been also discussed.     

Determination of Tetracaine Hydrochloride by Fluorescence Quenching Method with Some Aromatic Amino Acids as Probes

A novel fluorescence quenching method for the determination of tetracaine hydrochloride (TA·HCl) concentration with some aromatic amino acids as fluorescence probe has been developed. In pH 6.3 acidic medium, tryptophane (Trp), tyrosine (Tyr) or phenylalanine (Phe) can react with tetracaine hydrochloride to form an ion-association complex by electrostatic attraction, aromatic stacking interaction and Van der Waals’ force, which lead to fluorescence quenching of above amino acids. The maximum fluorescence excitation and emission wavelengths of them are located at 278, 274, 258 nm and 354, 306, 285 nm, respectively. The relative fluorescence intensity (F ₀/F) is proportional to the TA·HCl concentration in certain range. The linear ranges and detection limits are 1.2–5.0 μg/mL and 0.37 μg/mL for Tyr-TA·HCl system, 1.3–6.0 μg/mL and 0.38 μg/mL for Trp-TA·HCl system, and 1.4–6.0 μg/mL and 0.41 μg/mL for Phe-TA·HCl system. The optimum reaction conditions, influencing factors and the effect of coexisting substances are investigated. And the results show the method has a good selectivity. Judging from the effect of temperature, the Stern-Volmer plots and fluorescence lifetime determination, the quenching of fluorescence of amino acids by TA·HCl is a static quenching process.     

Spectrofluorimetric Assessment of Metoclopramide Hydrochloride Using Terbium Doped in PMMA Matrix Optical Sensor

A new, simple and accurate spectrofluorimetric method for the determination of metoclopramide hydrochloride was developed. The metoclopramide hydrochloride can remarkably enhance the luminescence intensity of the Tb³⁺ ion doped in PMMA matrix at λ_ex = 360 nm in methanol at pH 6.9. The intensity of the emission band at 545 nm of Tb³⁺ ion doped in PMMA matrix is increased due to the energy transfer from metoclopramide hydrochloride to Tb³⁺ in the excited stated. The effect of different parameters, e.g., pH, temperature, Tb³⁺ concentration, foreign ions that control the fluorescence intensity of the produced ion associate was critically investigated. The calibration curve of the emission intensity at 545 nm shows linear response of metoclopramide over a concentration range of 5 × 10⁻⁵–5.0 × 10⁻⁸ M with detection limit of 8.7 × 10⁻¹⁰ M. The method was used successfully for the determination of metoclopramide in pharmaceutical preparations and human serum. The average recovery of 99.48% with standard deviation of 0.32% and 96.98% with standard deviation of 0.4%, of pharmaceutical preparations and human serum respectively, were obtained which compared will with the results obtained from standard LC method of average recovery 99.04% and standard deviation of 0.6% and average recovery of 98.19% with standard deviation of 0.6% of pharmaceutical preparations and human serum, respectively.     

Validated Spectrofluorimetric Method for the Determination of Lamotrigine in Tablets and Human Plasma Through Derivatization with <Emphasis Type="BoldItalic">o</Emphasis>-phthalaldehyde

A sensitive, simple and selective spectrofluorimetric method was developed for the determination of Lamotrigine (LMT) in pharmaceutical formulations and biological fluids. The method is based on reaction of LMT with o-phthalaldehyde in presence of 2-mercaptoethanol in borate buffer of pH 9.8 to yield a highly fluorescent derivative that is measured at 448 nm after excitation at 337 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The fluorescence-concentration plot was rectilinear over the range of 0.1–1.0 μg ml⁻¹ with lower limit of detection (LOD) 0.02 μg ml⁻¹ and limit of quantification (LOQ) 0.06 μg ml⁻¹ respectively. The proposed method was successfully applied to the the analysis of commercial tablets. Statistical comparison of the results obtained by the proposed and reference method revealed no significant difference in the performance of the two methods regarding the accuracy and precision respectively. The proposed method was further extended to the in-vitro and in-vivo determination of the drug in spiked and real human plasma. The mean percentage recoveries in spiked and real human plasma (n = 3) were 95.78 ± 1.37 and 90.93 ± 2.34 respectively. Interference arising from co-administered drugs was also studied. A proposal for the reaction pathway with o-phthalaldehyde was postulated.