Ultrahigh-efficiency TEM<Subscript>00</Subscript> diode-side-pumped Nd:YVO<Subscript>4</Subscript> laser

Ultrahigh-efficiency TEM₀₀ operation is demonstrated in a diode-pumped Nd:YVO₄ laser in a bounce amplifier geometry using a specially designed astigmatically optimised cavity configuration. Optical efficiency >68% is demonstrated and up to 27.1 W of output power for multimode operation. For single-mode TEM₀₀ operation, an output power of 23.1 W for 39.5 W of diode pumping was produced with beam propagation parameters of M_x ²=1.3 and M_y ²=1.1. Received: 10 October 2002 / Revised version: 9 December 2002 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +44-20/7594-7744, E-mail: a.minassian@ic.ac.uk     

High efficiency,high repetition-rate Nd:YVO<Subscript>4</Subscript> laser with TEM<Subscript>00</Subscript> end-pumped by 887 nm

Thermal effect of laser crystal is a very important factor for solid lasers. The most of heat is generated from the quantum loss between pump light and lasing light. If a longer wavelength of pump light is adopted, quantum loss and quantum loss efficiency can be reduced and improved, respectively. In this paper, a Nd:YVO₄ laser end-pumped by 887 nm LD is reported. Output power of 25 W is obtained from a single Nd:YVO₄, when the crystal absorbs pump light power of 38 W. The corresponding opto-optic conversion efficiency is up to 65.7%. When 30.7 W pump light is absorbed in the crystal, 19.4 W TEM₀₀ is obtained with M _x ² = 1.30, M _y ² = 1.26 and opto-optic conversion efficiency of 63.2%. The laser can work at the Q-switched mode. The uniform pulses are generated at high repetition of 100 kHz. And the conditions of pulse stability are analyzed in this paper.     

High-peak-power,high-repetition-rate LD end-pumped Nd:YVO<Subscript>4</Subscript> burst mode laser

A compact high-peak-power, high-repetition-rate burst mode laser is achieved by an acousto-optical Q-switched Nd:YVO₄ 1064 nm laser directly pumped at 878.6 nm. Pulse trains with 10–100 pulses are obtained using acousto-optical Q-switch at repetition rates of 10–100 kHz under a pulsed pumping with a 1 ms duration. At the maximum pump energy of 108.5 mJ, the pulse energy of 10 kHz burst mode laser reaches 44 mJ corresponding to a single pulse energy of 4.4 mJ and an optical-to-optical efficiency of 40.5 %.The maximum peak power of ~468.1 kW at 10 kHz is obtained with a pulse width of 9.4 ns. The beam quality factor is measured to be M ² ~1.5 and the pulse jitter is estimated to be less than 1 % in both amplitude and time region.     

High power Q-switched TEM<Subscript>00</Subscript> Nd:YVO<Subscript>4</Subscript> laser with self-adaptive compensation of thermal lensing effect

a high power dual-end-pumped Nd:YVO₄ laser with adaptive compensation of thermal lensing effect by adjusting HR mirror along the optical axis was proposed. In Q-switching operation at 70 kHz, the laser worked at different pump power (from 90 W to 70 W) with stable beam quality (M ² ∼ 1.15) and high output power (from 39 to 28.4 W), corresponding to the absorbed-output conversion efficiency of 55%. In the meantime, the pulse duration was increased from 24 to 31.7 ns. At various repetition rate from 60 to 100 kHz, the beam quality factors were all measured less than 1.2.     

Single-longitudinal mode Nd:YVO<Subscript>4</Subscript>/YVO<Subscript>4</Subscript>/KTP green solid state laser

We present the concept and practical realization of a single frequency, tuneable diode pumped Nd:YVO₄/YVO₄/KTP microchip laser operating at 532 nm. Theoretical analysis of the single mode operation of such a laser configuration is presented. The single frequency operation has been obtained in a birefringent filter, where an YVO₄ beam displacer acts as an ideal polarizer. Experimental results are in good agreement with theoretical analysis. We have obtained stable single frequency operation, tuneable over 0.6 nm in the spectral range around 1064 nm. The laser operated with output power up to 110 mW at 53 nm. The total optical efficiency (808 nm to 532 nm) was 14%.     

7 W laser diode end-pumped Nd:YVO<Subscript>4</Subscript> passively mode-locking laser with a semiconductor saturable absorber mirror

A powerful and stable LD end pumped Nd:YVO₄ passively mode-locking oscillator by SESAM was demonstrated. At the pumping power of 30 W, 7 W output was obtained with repetition rate of 79.5 MHz and pulse duration of 15 ps. The beam quality factors M ² were measured to be 1.30 and 1.33, respectively.     

High beam quality and compact diode end-pumped Nd:YVO<Subscript>4</Subscript> slab laser with a hybrid resonator

A compact, high power and high beam quality diode-end-pumped CW Nd:YVO₄ slab 1064 nm laser with a hybrid resonator is demonstrated. The maximum output power of 23.0 W is obtained under the pump power of 66.7 W, which gives the slope efficiency and optical conversion efficiency of 52.0 and 34.0%, respectively. The beam quality M² factors are measured to be 1.5 in the unstable direction and 1.7 in the stable direction. The power stability of the LD end-pumped slab laser at an output power of 19 W is measured to be 0.7% for half an hour operation.     

880 nm laser-diode end-pumped Nd:YVO<Subscript>4</Subscript> slab laser at 1342 nm

43.6 W near-diffraction-limited continuous-wave laser beam at 1342 nm in 880 nm laser-diode partially end-pumped Nd:YVO₄ slab laser is presented. The slope efficiency and optical-to-optical efficiency with respect to absorbed pumping power were 45.4% and 35.9%, respectively. At output power of 34.5 W, the M ² factors in unstable and stable directions were 1.3 and 1.2, respectively.     

LD end-pumped passively mode-locked Nd:YVO<Subscript>4</Subscript> laser with single-walled carbon nanotubes

We demonstrate a LD end-pumped passively mode-locked Nd:YVO₄ laser using a single-walled carbon nanotubes saturable absorber (SWCNT-SA). The SWCNT wafer was fabricated by electric arc discharge method on quartz substrate with absorption wavelength of 1064 nm. At the absorbed pump of 15.8 W, an output power of 750 mW CW (continuous wave) mode-locked laser pulse was achieved with the repetition of 79.7 MHz, corresponding to optical-optical efficiency of 4.75%.     

Transverse mode locking of Stokes radiation in diode end-pumped Nd:YVO<Subscript>4</Subscript> laser passively Q-switched by Cr<Superscript>4+</Superscript>:YAG

Transverse mode locking of the Stokes component generated in the mode of stimulated Raman scattering self-conversion by a pulsed diode end-pumped Nd:YVO₄/Cr:YAG laser is implemented for the first time under conditions of frequency degeneracy of cavity modes.     

Compact TEM<Subscript>00</Subscript> grazing-incidence Nd:GdVO<Subscript>4</Subscript> laser using a folded cavity

A compact diode-side-pumped Nd:GdVO₄ laser system using a folded cavity and grazing-incidence configuration is presented. The highest multimode output power obtained was 21.8 W at 36 W of effective diode pump power. Highest optical-to-optical conversion efficiency of 61.5% was achieved at 33 W of effective diode pump power with 20.3 W of multimode output power. For single-mode TEM₀₀ operation, an intracavity telescope was adopted for mode matching in the horizontal direction. Because of the folded cavity and the intracavity telescope, this laser head was the most compact to our knowledge of the TEM₀₀ grazing-incidence laser geometry. At last, an output power of 15 W was produced at 36 W of effective diode pump power. The stable Q-switching operation was also obtained. PACS 42.55.-f; 42.55.Xi; 42.60.Gd     

A high efficient end-pumped TEM<Subscript>00</Subscript> laser with pulse repetition rate of 5 kHz

An end-pumped Nd:YVO₄ laser fiber-coupled diode was designed. A maximum output power of 4.74 W TEM₀₀ mode CW laser was obtained for a pump power of 10.5 W. The optical efficiency and slope efficiency were measured as 45.1 and 57.8% at 1064 nm, respectively. In Q-switching operation, 4.45 W average power at a pulse repletion rate of 5 kHz was produced, with a stability of pulse peak value <2%.     

Study of Yb:YVO<Subscript>4</Subscript> lasers end-pumped by a 985-nm diode laser

Efficient continuous-wave operation is demonstrated at room temperature with a Yb:YVO₄ laser end pumped by a 985-nm diode. An output power of 2.46 W is generated at the highest available absorbed pump power of 6.2 W, with an optical-to-optical and slope efficiency of 40 and 76%, respectively. A theoretical calculation of the laser characteristics agrees closely with the experimental results.     

Quasi-three-level Nd:YVO<Subscript>4</Subscript> laser by diode pumping at 888 nm

We report efficient laser emission on the 914 nm ⁴ F _3/2 to ⁴ I _9/2 transition in Nd:YVO₄ under the pump with diode lasers at 888 nm for the first time. Continuous wave 6.57 W output power at 914 nm is obtained from a V-type resonator under 18.3 W of absorbed pump power; the slope efficiency with respect to the absorbed pump power was 60.6%. Moreover, intracavity frequency doubling with BiB₃O₆ (BiBO) nonlinear crystal yielded 1.77 W of deep-blue light at 457 nm with beam quality characterized by an M₂ factor of 1.25.     

LD end-pumped c-Cut Nd:YVO<Subscript>4</Subscript>/KTP self-Raman laser at 560 nm

Intra-cavity sum frequency generation (SFG) of c-cut Nd:YVO₄ self-Raman laser was investigated for the first time. A 4 × 4 × 10 mm³ KTP crystal with a type-II phase-matching cutting angle (θ = 83.4°, φ = 0°) was used for SFG between the fundamental light at 1066 nm and first-Stokes light at 1178 nm. The laser system with different curvature radii of output couplers and different pulse repetition frequencies were investigated. At a pump power of 14 W and pulse repetition frequency of 20 kHz, the average output power of yellow-green laser at 560 nm up to 840 mW was achieved, corresponding to a slope efficiency of 7.6% and a conversion efficiency of 6% with respect to diode pump power.     

High-pulse-stability double-end continuous-grown YVO<Subscript>4</Subscript>/Nd:YVO<Subscript>4</Subscript>/YVO<Subscript>4</Subscript> acousto-optically Q-switched laser at high repetition rates

High pulse amplitude stability of 0.62% (rms) is achieved at 60 kHz repetition rate in fundamental mode with double-end continuous-grown YVO₄/Nd:YVO₄/YVO₄ composite crystal. The average output power and pulse peak power are 32.9 W and 27.7 kW, respectively, with 19.8 ns pulse width and 548 μJ pulse energy. The pulse amplitude stability is investigated experimentally. The stability gets improved with the decrease of repetition rate and output transmission. From theoretical analysis, the reason of pulse instability at high repetition rates is that the initial population inversion doesn’t saturate and the final population inversion doesn’t approach zero. With the decrease of repetition rate and output transmission, the final population inversion decreases and the interaction between two adjacent pulse periods is weakened. Therefore, pulse stability improves.     

Passively Q-switched laser operation in a composite Nd:YVO<Subscript>4</Subscript>/Nd:YVO<Subscript>4</Subscript>/Nd:YVO<Subscript>4</Subscript> crystal with a single-walled carbon nanotube saturable absorber

By using a piece of single-walled carbon nanotube saturable absorber, the performance of the passively Q-switched composite Nd:YVO₄ laser has been demonstrated for the first time. The maximum average output power and the shortest pulse width are 1220 mW and 103 ns at the incident pump power of 5.04 W for a 10% transmission of the output coupler. The highest pulse repetition rate of 415.6 kHz and the largest single-pulse energy of 2.94 μJ are also obtained. The composite Nd:YVO₄ crystal has more excellent laser performance than the normal Nd:YVO₄ crystal at 1064 nm.     

Stationary generation of diode-pumped self-Raman Nd:YVO<Subscript>4</Subscript>/YVO<Subscript>4</Subscript> composite crystal laser

Output power dependences of composite Nd³⁺:YVO₄ Raman laser stationary generation on the longitudinal diode pump power are measured at different transmissions of the output mirror at the Stokes radiation frequency. The deviation of the measured dependences from linear is explained by the influence of thermal effects on both the overlap of the beams and diffraction losses. A method to estimate the laser and Stokes losses in the cavity and the parameters characterizing the overlap of the laser radiation with the pump and Stokes beams is proposed. A Stokes-component of power 2.1 W is obtained and corresponds to 12% diode-to-Stokes efficiency.     

Simultaneous self-mode-locking of TEM<Subscript>0,0</Subscript> and TEM<Subscript>1,0</Subscript> modes in a Nd:YVO<Subscript>4</Subscript> laser: Application for measuring the thermal focal length

We demonstrate that the simultaneous self-mode-locking of TEM_0,0 and TEM_1,0 modes can be achieved in a standard end-pumped Nd:YVO₄ laser. With this simultaneous self-mode-locking, the transverse beat frequency can be accurately measured as a function of the absorbed power. We employ the measured beat frequency and the cavity theory to precisely determine the effective focal length of the thermal lens in the gain medium.     

All-solid-state Nd:YVO<Subscript>4</Subscript> laser at 1342 nm under 914 nm diode laser pumping

A Nd:YVO₄ crystal was pumped directly into the emitting level by a laser diode at 914 nm. We achieved an output power of 1.46 W at 1342 nm for an incident pump power of 18.3 W, corresponding to an optical-to-optical conversion efficiency of 8.0%. The fluctuation of the output power was better than 2.3% in the given 30 min. The beam quality M₂ factor value was equal to 1.15 at the maximum output power.