Extraction of actinides in two-phase water-poly(ethylene glycol)—Salt systems in the presence of potassium phosphotungstate

Extraction of actinides has been examined in two-phase aqueous systems based on poly(ethylene glycol) (PEG) from sulfate solutions in the presence of potassium phosphotungstate, which forms strong complexes with ions of tri- and tetravalent transuranium elements. Extraction of these complexes by aqueous PEG solution is complete in contrast to that of penta- and hexavalent actinides. Conditions have been chosen for the separation of actinides in different oxidation states.     

聚丙烯酰胺-聚乙二醇-水体系相图及丙烯酰胺单体在两相中的分配

聚丙烯酰胺(PAAm)和聚乙二醇(PEG)两种水溶液混合时能形成双水相体系,其中上层为PEG富集相,下层为PAAm和PEG的混合相.用凝胶渗透色谱(GPC)法和浊度滴定法研究了PAAm-PEG-H₂O双水相体系的相图,结果表明,随着PEG分子量的升高,体系的分相浓度下降.在PAAm-PEG20000-H₂O体系中,随着体系温度升高,分相浓度先下降后升高,55℃时分相浓度最低.丙烯酰胺(AAm)单体能在两相中发生相分配,分配系数随着PAAm浓度和平衡温度的增加而增大,随着PEG浓度的增加而下降.     

Spectrophotometric determination of phosphate ions with the system cerium(III)Arsenazo III

A new method for the spectrophotometric determination of PO(3-)(4), based on the conversion of the complex of cerium(III) with arsenazo III (CeH(4)R(-)) into CePO(4) is proposed and used for the indirect spectrophotometric determination of phosphorus in ferro-silicon. The reaction between Ce(III) and arsenazo III has been studied spectrophotometrically and the stability constants of the complex CeH(4)R(-) have been determined: log beta(1) = 6.42 +/- 0.10 (for pH 1-3) and log beta(1) = 6.11 +/- 0.02 (for pH 5.5-7).     

Spectrophotometric and electrochemical determination of the formation constants of the complexes Curcumin-Fe(III)-water and Curcumin-Fe(II)-water

The formation of complexes among the Curcumin, Fe(III) and Fe(II) was studied in aqueous media within the 5-11 pH range by means of UV-Vis spectrophotometry and cyclic voltammetry. When the reaction between the Curcumin and the ions present in basic media took place, the resulting spectra of the systems Curcumin-Fe(III) and Curcumin-Fe(II) presented a similar behaviour. The cyclic voltammograms in basic media indicated that a chemical reaction has taken place between the Curcumin and Fe(III) before that of the formation of complexes. Data processing with SQUAD permitted to calculate the formation constants of the complexes Curcumin-Fe(III), corresponding to the species FeCur (lob beta110 = 22.25 +/- 0.03) and FeCur(OH)- (log beta111 = 12.14 +/- 0.03), while for the complexes Curcumin-Fe(II) the corresponding formation constants of the species FeCur- (log beta110 = 9.20 +/- 0.04), FeHCur (log beta111 = 19.76 +/- 0.03), FeH2Cur+ (log beta112 = 28.11 +/- 0.02).     

Self-assembly of medium-chain alkyl monoglucosides in ammonium sulfate solutions with poly(ethylene glycol)

We study the phase behavior and microstructure of alkyl-beta-monoglucosides with intermediate chain lengths (octyl- and nonyl-beta-glucoside) in aqueous solutions containing ammonium sulfate and poly(ethylene glycol) (PEG). When the glucoside surfactants are mixed with PEG of molecular weight 3350 or larger, two different phase transitions are observed in the temperature range 0-100 degrees C, with lower and upper miscibility gaps separated by a one-phase isotropic region. Isothermal titration calorimetry is used to quantify the effect of PEG on the micellization properties of the alkyl monoglucosides, whereas small-angle neutron scattering gives insight into the microstructure of the surfactant/polymer mixtures near the liquid-liquid phase boundary. Results show that the range and the strength of the interactions in these solutions are highly affected by the presence of PEG. Solutions with nonyl-beta-glucoside contain larger micelles than those with octyl-beta-glucoside, and the intermicellar interactions are much stronger and longer ranged. The relevance of these findings for membrane protein crystallization is discussed.     

Synthesis, Characterization and thermal behaviour of hemimellitic acid complexes with lanthanides(III)

The complexes of lanthanides(III) with hemimellitic acid (1,2,3-benzenetricarboxylic acid, H₃btc) of the formula Ln(btc)·nH₂O, where Ln=lanthanide(III) ion and n=2?6 were prepared and characterized by elemental analysis, infrared spectra, X-ray diffraction patterns and thermal analysis. The IR spectra of the complexes indicate coordination of lanthanides(III) through all carboxylate groups. The complexes of La(III), Ce(III), Pr(III) and Er(III) are amorphous. On heating in air atmosphere all complexes lose water molecules and next anhydrous compounds decompose to corresponding metal oxides.     

Extraction of endoglucanase I (Ce17B) fusion proteins from Trichoderma reesei culture filtrate in a poly(ethylene glycol)-phosphate aqueous two-phase system

Endoglucanases (EGI) (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Ce17B) of Trichoderma reesei are industrially important enzymes. Thus, there is a great need for development of a primary recovery method suitable for large-scale utilization. In this study we present a concept applicable for large-scale purification of an EGI fusion protein by one-step extraction in a poly(ethylene glycol) PEG-sodium/potassium phosphate aqueous two-phase system. EGI is a two-module enzyme composed of an N-terminal catalytic module and a C-terminal cellulose binding module (CBM) separated by a glycosylated linker region. Partitioning of six different EGI constructs, containing the C-terminal extensions (WP)2, (WP)4 or the amphiphilic protein hydrophobin I (HFB) of T. reesei instead of the CBM were studied to evaluate if any of the fusions could improve the partition coefficient sufficiently to be suitable for large-scale production. All constructs showed improved partitioning in comparison to full length EGI. The (WP)4 extensions resulted in 26- to 60-fold improvement of partition coefficient. Consequently, a relative minor change in amino acid sequence on the two-module protein EGI improved the partition coefficient significantly in the PEG 4000-sodium/potassium phosphate system. The addition of HFBI to EGI clearly enhanced the partition coefficient (K=1.2) in comparison to full-length EGI (K=0.035). Partitioning of the construct with (WP)4 fused to the catalytic module and a short sequence of the linker [EGI(core-P5)(WP)4] resulted in the highest partition coefficient (K=54) and a yield of 98% in the PEG phase. Gel electrophoresis showed that the construct with the (WP)4 tag attached after a penta-proline linker could be purified from the other bulk proteins by only a single-step separation in the PEG 4000-sodium/potassium phosphate system. This is a major improvement in comparison with the previously studied model (ethylene oxide-propylene oxide)-dextran system. Hence, this construct will be suitable for further optimization of the extraction of the enzyme in a PEG 4000-sodium/potassium phosphate system from culture filtrate.     

Extraction and determination of papaverin in pericarpium papaveris using aqueous two-phase system of poly(ethylene glycol)-(NH4)2SO4 coupled with high-performance liquid chromatography

Based on aqueous two-phase system (ATPS) of poly(ethylene glycol) (PEG)–(NH₄)₂SO₄, a simple pretreatment approach was developed for the extraction and determination of papaverin in pericarpium papaveris. The influence factors on phase behavior of the ATPS and partition behavior of papaverin was investigated, and partition mechanism based on the hydrophobic interaction between PEG and analyte molecules was proposed. Under the optimal conditions, the extraction efficiencies for papaverin were 93–96%, and the recoveries of the added standard were 97–106% with relative standard deviations of 1.8–2.5%. Combined with a high-performance liquid chromatography (HPLC) method, this extraction technique has been successfully applied to the determination of papaverin in pericarpium papaveris with the detection limit of 2 ng mL⁻¹ and the linear range of 0.10–10 μg mL⁻¹. Compared with the conventional liquid–liquid extraction or solid-phase extraction, this method was more environmentally benign, more cost effective and much simpler due to the direct injection of the upper phase into HPLC system.     

Preparation and characterization of iron(II) complexes of ethylene glycol

Nine iron(II) ethylene glycol sulphate complexes were prepared. Their compositions were determined by standard analytical methods. They were characterized by means of temperature-dependent magnetic susceptibility and Mössbauer spectroscopic measurements. On the basis of the patterns of their thermal decompositions, the complexes could be classified into three groups.

---

Zusammenfassung Neun Eisen(II)-ethylenglykol-sulfat-Komplexe wurden dargestellt. Die Zusammensetzung dieser Komplexe wurde nach analytischen Standardmethoden bestimmt. Die Verbindungen wurden durch Messungen der temperaturabhängigen magnetischen Susceptibilität sowie mittels Mössbauer-Spektroskopie charakterisiert. Nach dem Verhalten bei der thermischen Zersetzung konnten diese Komplexe in drei Gruppen klassifiziert werden.

---

, . . , .

     

聚乙二醇双水相萃取光度法测定镍

用水溶性高聚物、表面活性剂及有机物与无机盐形成的双水相体系萃取分离色素、蛋白质及测定金属离子已有报道[1-5].     

Complexes formed between the quadridentate, heterocyclic molecules 6,6'-bis-(5,6-dialkyl-1,2,4-triazin-3-yl)-2,2'-bipyridine (BTBP) and lanthanides(III): implications for the partitioning of actinides(III) and lanthanides(III)

New hydrophobic, tetradentate nitrogen heterocyclic reagents, 6,6'-bis-(5,6-dialkyl-1,2,4-triazin-3-yl)-2,2'-bipyridines (BTBPs) have been synthesised. These reagents form complexes with lanthanides and crystal structures with 11 different lanthanides have been determined. The majority of the structures show the lanthanide to be 10-coordinate with stoichiometry [Ln(BTBP)(NO3)3] although Yb and Lu are 9-coordinate in complexes with stoichiometry [Ln(BTBP)(NO3)2(H2O)](NO3). In these complexes the BTBP ligands are tetradentate and planar with donor nitrogens mutually cisi.e. in the cis, cis, cis conformation. Crystal structures of two free molecules, namely C2-BTBP and CyMe4-BTBP have also been determined and show different conformations described as cis, trans, cis and trans, trans, trans respectively. A NMR titration between lanthanum nitrate and C5-BTBP showed that two different complexes are to be found in solution, namely [La(C5-BTBP)2]3+ and [La(C5-BTBP)(NO3)3]. The BTBPs dissolved in octanol were able to extract Am(III) and Eu(III) from 1 M nitric acid with large separation factors.     

Poly(ethylene glycol)-lipase complexes catalytically active in fluorous solvents

Lipase-catalyzed alcoholysis between vinyl cinnamate and benzyl alcohol in fluorous solvents was investigated. This is the first report of a lipase-catalyzed reaction in a fluorous solvent. Forming the poly(ethylene glycol)(PEG)-lipase PL complex enhanced lipase activity over 16-fold over that of native lipase powder. The PEG-lipase PL complex exhibited markedly higher alcoholysis activities in fluorous solvents than in conventional organic solvents such as isooctane and n-hexane. The optimum reaction temperature for FC-77 (perfluorooctane) was 55 [degree]C and the optimum pH for the preparation of the PEG-lipase complex was 9.0; similar to the conditions for lipase PL-catalyzed reaction in aqueous solution. The alcoholysis reaction in fluorous solvent requires the addition of a FC77-miscible organic solvent (isooctane) in order to dissolve non-fluorinated substrates. Lipase activity in the fluorous solvent was significantly influenced by the volume ratio of isooctane in the reaction medium. Vinyl cinnamate inhibition of the lipase-catalyzed reaction occurred at a much lower concentration in the fluorous solvent than in isooctane. These results can be explained by the localization of substrates around lipase molecules, induced by adsorption of the substrates to the PEG layer of the PEG-lipase complex.     

Extraction of lanthanides(III) by phosphorylated naphthyridine ligands from carbonate solutions

The extraction capacities and selectivities of 1,8-naphthyridine-based neutral organophosphorus reagents in extracting trivalent lanthanides (Ln, Nd, Ho, Yb) from carbonate solutions were studied. The length and nature of the linker between the naphthyridine and phosphoryl moieties were found to have considerable influence on the efficiency and selectivity of lanthanide extraction.     

Molecular interactions in poly(ethylene glycol)-water mixtures at various temperatures: density and isentropic compressibility study.

The densities and sound velocities of mixtures of water with poly(ethylene glycol), poly(ethylene glycol) monomethylether, and poly(ethylene glycol) dimethylether with mean molar weights between 250 and 500 have been measured as a function of mixture composition and temperature between 10 and 40 degrees C. Isentropic compressibilities are derived from the data and are compared to those for the ethylene glycol/water system and for other organic solvent/water mixtures. Relative minima in the mixture volume to ideal volume ratio and in the dependence of the compressibility upon mixture composition are discussed in terms of the conformational variability of the chainlike oligomers, of hydrogen-bonded networks, and of water clusters between the oligomer chains.     

Block copolymerization initiated by Mn(III)-poly(ethylene glycol) redox system — general features and kinetics

The kinetics and mechanism of thermal polymerization of acrylonitrile initiated by Mn(III) pyrophosphate — poly(ethylene glycol) (PEG, molecular weight 6000) redox system in aqueous sulfuric acid medium was studied in the temperature range 30–60°C. The overall rates of polymerization and the disappearance of Mn³⁺ were determined. The polymerization was initiated by the organic free radical produced from the Mn³⁺-PEG reaction and the termination was by the metal ions. The rate of polymerization of acrylonitrile was found to be directly proportional to the square of the monomer concentration and first power of PEG concentration, and inversely proportional to the concentration of Mn³⁺. The rate of manganic ion disappearance was found to be directly proportional to manganic ion concentration and PEG concentration, and independent of the monomer concentration. Based on these observations, a plausible reaction scheme was suggested and suitable kinetic expressions were evaluated.     

Extraction and determination of morphine in compound liquorice using an aqueous two-phase system of poly(ethylene glycol)/K2HPO4 coupled with HPLC

An aqueous two-phase system (ATPS) of poly(ethylene glycol) (PEG)/K₂HPO₄ coupled with high performance liquid chromatography (HPLC) method was developed for the separation and determination of morphine in compound liquorice. Morphine and its analogs were used as model compounds to investigate influence of various factors on extraction behaviors of ATPS, such as the types and concentrations of salts, PEG molecular mass, temperature and pH. It was observed that the types of salt had much influence on extraction efficiencies of morphine and its analogs. The results indicated that hydrophobic force cooperating with hydrogen bond interaction between analytes and phases played important role in extraction process. In the optimal system of containing 0.5 g PEG2000 and 1.5 g K₂HPO₄, the recoveries of the spiked standards for the analytes were all 91.7-100.3% with relative standard deviation of 1.0-3.0%. Morphine in compound liquorice was determined by the proposed method and the results were consistent with those of LC-MS method. Compared with conventional liquid-liquid extraction or solid-phase extraction, this extraction method can be completed in one operation and is low-cost. Since the entire extraction process is organic solvent-free, this new technique is environmental friendly.     

Dielectric properties of aqueous solutions of the ammonium heptamolybdate-poly(vinyl alcohol)-water system

The microwave dielectric properties of aqueous solutions of the ammonium heptamolybdate (AHM)-poly(vinyl alcohol)-water ((NH₄)₆Mo₇O₂₄-PVA-water) system are studied along sections with constant concentrations of the components in the frequency region in which the dispersion peak of the dielectric constant of water falls (13–25 GHz) at 298 and 313 K. The static dielectric constant ε_s and the dielectric relaxation time τ of the solutions are found. The dielectric characteristics along the sections vary additively as a function of concentration with respect to the relationships observed in the AHM-water and PVA-water binary systems. The rotational mobility of water molecules is mainly controlled by polymer additives. We suggest that two (water and polymer-ion) subsystems exist in the solution in this case; these subsystems only weakly affect each other.