A comparative study of aluminum(III), gallium(III), indium(III), and thallium(III) binding to human serum transferrin

Group 13 cations exhibit an essentially similar chemical behavior in aqueous solution. Under physiological conditions these cations exist as metal complexes. They are known to bind tightly to human serum transferrin in the blood. Here, the numerous published studies on the interactions of Group 13 metals with transferrin are reviewed, particular attention being given to the comparative analysis of the binding constants and to the kinetics and mechanisms of metal ion uptake and release. The structural and functional information obtained on these metallotransferrins by advanced physicochemical methods, such as NMR spectroscopy, is presented in light of the recent crystal structures of ferric- and apotransferrin. The biological consequences of binding of aluminum(III), gallium(III) and indium(III) to transferrin are discussed in relation to the relevant roles played by these metal ions in pharmacology and toxicology.     

Effect of alkyl substitueras in hydrophobic 8-quinolinol on the extraction of gallium(III) and applications to the separation of gallium(III) from aluminum(III)

The extraction of gallium(III) with newly prepared 5-alkyloxymethyl-8-quinolinol derivatives with alkyl substituent at the 2-position in 8-quinolinol moiety has been studied. The Ga(III)-5-octyloxymethyl-8-quinolinol (HO(8)Q), Ga(III)-2-methyl-5-octyloxymethyl-8-quinolinol (HMO(8)Q), Ga(III)-2-methyl-5-hexyloxymethyl-8-quinolinol (HM-O(6)Q), and Ga(HI)-2-n-butyl-5-hexyloxymethyl-8-quinolinol (HNBO(6)Q) complexes extracted in heptane from a perchloric acid medium were Ga(O(8)Q)(3), Ga(OH)(H(2)O)(MO(8)Q)(2), Ga(OH)(H(2)O)(MO(6)Q)(2) and Ga(OH)H(2)O)(NBO(6)Q)(2), respectively. The 2-tert-butyl-5-hexyloxymethyl-8-quinolinol did not exhibit any reactivity toward gallium(III). The extraction constants for Ga(O(8)Q)(3) (K(ex) = [Ga(O(8)Q)(3)](org) [H(+)](3)/[Ga(3+)][HO(8)Q](org)(3)), Ga(OH)(H(2)O)(MO(8)Q)(2) (K(ex) = [Ga(OH) (H(2)O)(MO(8)Q)(2)](org) [H(+)](3)/[Ga(3+)][HMO(8)Q](org)(2)), Ga(OH)(H(2)O)(2)(MO(6)Q)(2) and Ga(OH)(H(2)O)(NBO(6)Q)(2), which were extracted in heptane from an acidic solution, are 10(3.21 +/- 0.12), 10(-4.24 +/- 0.16), 10(-3.84 +/- 0.16) and 10(-4.07 +/- 0.07), respectively at I = 0.1 M and 25 degrees C. HNBO(6)Q exhibited very high selectivity toward gallium(III) in the presence of aluminum(III). Even in the presence of a 100 fold excess of aluminum(III) to gallium(III) (1.43 x 10(-5) M), gallium(III) was completely extracted and the distribution ratio of aluminum(III) was found to be less than 2.0 x 10(-3).     

Solvent effect on ion-pair extraction of 2-(2-pyridylazo)-1-naphthol-4-sulfonate anion with solvated hydroxonium ion using alcohols and 1-octanol/octane mixed solvents.

Extraction of 2-(2-pyridylazo)-1-naphthol-4-sulfonate anion with solvated hydroxonium ion was carried out using 14 kinds of alcohols and 1-octanol/octane mixed solvents as a solvent at 25 degrees C. Alcohols are 1-pentanol, 1-hexanol, 1-heptanol, 2-heptanol, 3-heptanol, 4-heptanol, 1-octanol, 2-octanol, 3-octanol, 1-nonanol, 2-nonanol, 3-nonanol, 5-nonanol and 1-decanol. Among them, 1-octanol was found to be extremely high in extractability for 2-(2-pyridylazo)-1-naphthol-4-sulfonate anion with hydroxonium cation. The extraction equilibrium for the systems using 1-octanol/octane mixed solvents was analyzed in detail in order to examine the extraction mechanism for these extraction systems. 2-(2-Pyridylazo)-1-naphthol-4-sulfonate anion was found to be extracted with the hydroxonium ion solvated by three 1-octanol molecules as an ion-pair. The extraction and partition constants of the ion-pair of 2-(2-pyridylazo)-1-naphthol-4-sulfonate anion with solvated hydroxonium ion were estimated in the 1-octanol/octane mixed solvent systems.     

Solvent extraction and separation of gallium(III), indium(III), and thallium(III) with tributylphosphate

A systematic study has been made of the solvent extraction behaviour of milligram amounts of gallium(III), indium(III), and thallium(III) with TBP from hydrochloric acid, and of thallium(III) from nitric acid, sulphuric acid and buffer solutions of different pH. The effect of the metal ion concentration, acid concentration, reagent concentration, salting-out agent, and diverse ions have been critically examined. A scheme for separation of gallium(III), indium(III), and thallium(III) from each other and for their determination is proposed.     

Selective extraction of thallium(III) in the presence of gallium(III), indium(III), bismuth(III) and antimony(III) by salting-out of an aqueous mixture of 2-propanol

Thallium(III), in the presence of other triply charged ions such as gallium, indium, bismuth and antimony in aqueous solution, was quantitatively and selectively extracted into 2-propanol/water phase by addition of NaCl ranging from 2.5 to 4.0 mol dm⁻³. The extraction efficiencies of gallium, indium, bismuth and antimony were much lower than that of thallium(III). Thus a maximal selective separation of thallium(III) from these elements could be attained using a 2-propanol/water mixture. Thallium(III) was extracted as TlCl₄⁻ with Na⁺. The detailed extraction mechanism in the presence of chloride, water in the organic phase and counter ions is discussed.     

Studies on extraction of Cu(II), Ga(III), In(III) and Tl(III) with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one Separation and spectrophotometric determination of copper and gallium

The extraction of Cu(II), Ga(III), In(III) and Tl(III) with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HPMBzP) from aqueous solutions has been investigated. The mechanism of extraction and the composition of the species extracted has been determined. The effect of equilibration time, various organic solvents and salting-out agents on the extraction of copper and gallium has also been investigated. The green Cu(PMBzP)₂ chelate has absorption maxima at 298 and 670 nm, and PMBzP has maximum absorbance at 290 nm. A new and sensitive spectrophotometric method for copper has been devised, based on the absorbance at 670 nm. The presence of excess of reagent does not interfere and no special treatment is necessary to destroy it. The proposed method has some advantages and has been applied for the determination of copper in various soil samples. Gallium has been separated from indium, thallium, copper, iron and many other elements. The recovery of gallium and copper was 100 ± 0.2%.     

Supercritical carbon dioxide extraction equilibrium of gallium(III) with 2-methyl-8-quinolinol and 2-methyl-5-butyloxymethyl-8-quinolinol

This work performed fundamental studies for the extraction of gallium(III) with 2-methyl-8-quinolinol (HMQ) and 2-methyl-5-butyloxymethyl-8-quinolinol (HMO(4)Q) into supercritical carbon dioxide (SF-CO(2)) from a weakly acidic solution. The distribution constants of HMO(4)Q between aqueous and SF-CO(2) phases were determined at 45 degrees C, 8.6-20.4 MPa and I=0.1 M (H, Na)NO(3) (M=mol dm(-3)). At 45 degrees C and 15.7 MPa, gallium(III) was hardly extracted with HMQ into SF-CO(2), but was quantitatively extracted with HMO(4)Q in the pH range of 2.20-2.84. The extraction constant, K(ex, SF-CO(2)) (=[Ga(OH)(MO(4)Q)(2)](SF-CO(2))[H(+)](3)[Ga(3+)](-1)[HMO(4)Q](SF-CO(2))(-2)), of gallium(III) with HMO(4)Q was determined to be 10(-2.6+/-0.1) at 45 degrees C, 15.7 MPa and I=0.1 M (H, Na)NO(3), which was 63 times larger than that in heptane at 45 degrees C and 0.10 MPa. It was also found that the addition of 3,5-dichlorophenol as a synergist enhanced the extractability of gallium(III) with HMO(4)Q into SF-CO(2).     

The use of fluorescence in determining formation constants of complexes : Part II. Complexes which fluoresce

Four different methods for the calculation of the formation constants of fluorescing complexes are discussed. The methods were used to determine constants for the complexes of aluminum(III), gallium(III) and indium(III) with 8-quinolinol-5-sulfonate anion.     

Gallium(III) Extraction from Alkaline Solutions with 5-Amylthio-8-quinolinol

Equilibrium extraction of gallium(III) from alkaline solutions with 5-amylthio-8-quinolinol was studied.     

Extraction of gallium(III) by 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl}-1H-1,2,4-triazole from hydrochloric acid solutions

The extraction of gallium(III) with 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2- yl]methyl}-1H-1,2,4-triazole from hydrochloric acid solutions into toluene was studied. It was found that gallium( III) was efficiently extracted from 5–10 M solutions of HCl by the anion-exchange mechanism. The following metal extraction order was determined in the above aqueous phase acidity range: Ga(III) > In(III) > Al(III). The concentration constants and the thermodynamic parameters of the reaction of gallium(III) extraction from 6 M solutions of HCl at 25 °C were calculated.     

Synergistic cloud point extraction behavior of aluminum(III) with 2-methyl-8-quinolinol and 3,5-dichlorophenol.

The cloud point extraction behavior of aluminum(III) with 8-quinolinol (HQ) or 2-methyl-8-quinolinol (HMQ) and Triton X-100 was investigated in the absence and presence of 3,5-dichlorophenol (Hdcp). Aluminum(III) was almost extracted with HQ and 4(v/v)% Triton X-100 above pH 5.0, but was not extracted with HMQ-Triton X-100. However, in the presence of Hdcp, it was almost quantitatively extracted with HMQ-Triton X-100. The synergistic effect of Hdcp on the extraction of aluminum(III) with HMQ and Triton X-100 may be caused by the formation of a mixed-ligand complex, Al(dcp)(MQ)2.     

Liquid-liquid extraction with long-chain quaternary Ammonium Halides

The extraction of anionic chloro-complexes of certain metal ions using various long-chain quaternary ammonium halides in toluene and chloroform is described. The investigation has concerned itself mainly with coualt(II) and iron(III); a few extractions have also been carried out with indium(III) and gallium(in). The ion association of chloro-anionic complexes of iron, cobalt, indium and gallium in aqueous chloride media (hydrochloric acid or lithium chloride) with the quaternary ammonium ion in the organic phase is responsible for the extraction of the metal ion into the organic phase. Tlic extraction efficiency varies with the nature of the metal ion system involved as well as with the distribution of the quaternary compound and the size, shape and nature of the organic groups substituted in the quaternary compound.     

Extraction of indium(III) from sulfate solutions with organophosphorus acids

Extraction of indium(III) from sulfuric acid solutions with di-2-ethylhexyl hydrogen phosphate and isododecylphosphethanic and diisooctylphosphinic acids was studied. The effect of H₂SO₄ and In(III) concentrations in the aqueous phase, type and concentration of the extractant in the organic phase, temperature, and time of phase contact on the extraction of In(III) and impurity metal ions was considered. The In(III) extraction constants were estimated.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 10, 2004, pp. 1625–1629.Original Russian Text Copyright © 2004 by Travkin, Kubasov, Glubokov, Busygina, Kazanbaev, Kozlov.     

Metal chelate exchange in the organic phase-I Theory: application in spectrophotometry and complex chemistry

Metal chelates, extracted from an aqueous phase by organic solvents, can react with other chelating agents (or their metal chelates) dissolved in the same solvent. This exchange of metal chelates in the organic phase can be used for (1) investigation of the exchange equilibrium and composition of the metal chelates formed, (2) determination of the extraction constants, (3) preparation of new inner-complexes soluble in organic solvents, and (4) spectrophotometric determination of small amounts of metals. The theory and experimental verification of this phenomenon are given. The extraction constants of silver and zinc diethyldithiocarbamates in carbon tetrachloride have been determined by means of the extraction constants of the corresponding dithizonates. A mixed complex of arsenic(III) with dithizone and diethyldithiocarbamic acid has been prepared and its properties studied. A simple method for spectrophotometric determination of microgram quantities of arsenic is proposed.     

Description of liquid—liquid extraction equilibria in exchange extractions of chelates: Part 3. Calculation of pH—pA Diagrams and Enrichment Factors in pH—pA Coordinates

Equilibrium values of free ligand concentration (pA) in extraction systems which contain comparable amounts of metal and extraction agents, particularly exchange extraction systems, can readily be calculated with a desk computer. The technique is applied in the treatment of extraction systems where step-wise complexation, hydrolysis, masking and polynuclear complex formation of the metal take place in the aqueous phase. Data of normalized coordinates are tabulated and proved to be useful in finding pA in extraction systems of chelates MA .... MA₄, of various compositions. The same mathematical approach is used to calculate enrichment factors for two-element separations as a function of pA and pH. Model systems of the Zn, Pb, Co(II), Co(III) and Fe(II) diethyldithiocarbamates and Fe(III) and Sc 8-quinolinolates serve as examples.     

Solvent extraction of 8-quinolinolato-iron(III) with the aid of various phenols as hydrogen-bonding donors

Effect of various phenols (ArOh) on the solvent extraction of iron(III) with 8-quinolinol (HQ) has been investigated. Greatly enhanced extraction is found in the presence of ArOh, e.g., the distribution ratio of iron(III) with HQ in carbon tetrachloride is increased 200,000-fold by 0.10M 3,5-dichlorophenol. From extraction equilibrium analysis, the enhanced extraction has been ascribed to the formation of association complexes of neutral iron(III) 8-quinolinolate (FeQ(3)) with ArOH as FeQ(3) . nArOH (n = 1, 2,3) in the organic phase, and the association constants (beta(ass,n)) have been determined. A linear relation is observed between logarithmic values of beta(ass,n) and the acid-dissociation constant of ArOH. Existence of the hydrogen bond between FeQ(3) and ArOH is clearly shown by infrared spectroscopy.     

Extraction and separation of gallium, indium and thallium with several carboxylic acids from chloride media

A method is proposed for the extraction and individual separation of trivalent gallium, indium and thallium with sec-octylphenoxy acetic acid (CA-12), sec-nonylphenoxy acetic acid (CA-100) and naphthenic acid (NA) from chloride media. The distribution equilibria of gallium (III), indium (III), thallium (III) and thallium (I) between carboxylic acids (CA-12, CA-100 and NA) dissolved in kerosene and acidic aqueous chloride media has been investigated as a function of the concentration of extractants and the concentration of hydrogen ion in aqueous phase. A possible mechanism of the extraction is discussed. The method permits rapid and precise individual separation of gallium (III), indium (III) and thallium (III), and is applicable to the analysis of alloy samples.     

Salting-out extraction technique for pretreatment in the liquid chromatographic determination of copper(II), aluminum(III), iron(III) and manganese(II) in biological samples

A solvent extraction method for the simultaneous determination of Cu, Al, Fe and Mn by reversed phase liquid chromatography is presented. The metal chelates with 5-chloro-8-quinolinol are extracted into an acetonitrile phase with tetrabutylammonium perchlorate and ammonium sulfate as salting-out agents, followed by LC separation and determination using an ODS column. The experimental parameters such as the composition of mobile phase and concentration of the salting-out agent for phase separation have been investigated. The mobile phase is a mixture of 3:1 (v/v) acetonitrile-0.02 mol l(-1) sodium acetate solution containing 5x10(-3) mol l(-1) 5-chloro-8-quinolinol. The proposed method has been applied to the trace analysis of Cu, Al, Fe and Al in bovine liver and citrus leaves.     

COMPLEXES OF GALLIUM(III) WITH HYDROXYAROMATIC LIGANDS

Abstract

The equilibria between gallium(III) ion and selected hydroxyaromatic and dihydroxyaromatic ligands at 25°C, μ=0.100 M (KNO₃) have been determined. Potentiometric measurements on 1:1, 2:1, and 3:1 molar ratios of ligand to Ga(III) have been made as a function of degree of neutralization over the entire accessible ?log [H⁺] scale. Calculations were carried out so as to take account of competing hydrolytic reactions, and formation constants of gallium(III) with chromotropic acid, 8-hydroxyquinoline-5-sulfonic acid, 5-sulfosalicylic acid, and 1,2-dihydroxy-benzene-3,5-disulfonic acid were obtained. Stable hydroxo chelates do not form under the reaction conditions employed. The protonation constants of the ligands and the formation constants of the gallium chelates are discussed and compared with previously published work on these gallium chelates and on chelates of “analogous” metal ions such as those of Fe(III) and A1(III).