Bis[1]benzothieno[1,4]thiazines: Planarity,Enhanced Redox Activity and Luminescence by Thieno-Expansion of Phenothiazine

Twofold Buchwald–Hartwig aminations selectively furnish three regioisomers of bis[1]benzothieno[1,4]thiazines; X-ray structure analyses and DFT calculations were corroborated for correlation of their electronic properties. All regioisomers outscore the parent compound phenothiazine with respect to a low-lying oxidation potential and reversible redox activity. The anti-anti bis[1]benzothieno[3,2-b:2′,3′-e][1,4]thiazines possess the lowest oxidation potentials in this series and displayed pronounced green luminescence in solution (Φ_F≈20 %) and in the solid state. Syn-anti regioisomers were only weakly luminescent in solution, but showed aggregation-induced emission enhancement and solid-state luminescence. Most interestingly, X-ray structure analyses revealed that anti-anti derivatives have an amazingly coplanar structure of the pentacyclic anellated 1,4-thiazine system, emphasizing a structural similarity to heteroacenes. The calculated theoretical nucleus-independent chemical shifts additionally suggested that these 8π-electron core systems can be considered as the first electronically unbiased anellated 1,4-thiazines with antiaromatic character.     

Über die Dicyanierung der 1,4-Diaminoanthrachinone und die Reaktivität der 1,4-Diamino-9,10-dihydroanthracen-2,3-dicarbonitrile gegenüber nucleophilen Reagenzien 3. Mitteilung über Arylierungen und Heterocyclisierungen von Anthrachinonsystemen

The Dicyanation of 1,4-Diaminoanthraquinones and the Reactivity of 1,4-Diamino-9,10-dioxo-9,10-dihydroanthracene-2,3-dicarbonitriles towards Nucleophilic Reagents The reaction of 1-amino-9, 10-dioxo-4-phenylamino-9,10-dihydroanthracene-2-sulfonic acid ( 1 , R?C₆H₅) with cyanide in water yields a mixture of 1-amino-9,10-dioxo-4-phenylamino-9,10-dihydroanthracene-2-carbonitrile ( 3 , R ? C₆H₅) and 1-amino-4-(phenylamino)anthraquinone ( 4 , R ? C₆H₅) under the usual reaction conditions (Scheme 1). In dimethylsulfoxide, however, a second cyano group is introduced, and 1-amino-9,10-dioxo-4-phenylamino-9,10-dihydroanthracene-2,3-dicarbonitrile (7) is formed (Scheme 2). The cyano groups are very reactive towards nucleophiles. The cyano group in 2-position can be substituted by hydroxide and aliphatic amines (Schemes 5 and 6). The cyano group in 3-position can be eliminated by aliphatic amines and hydrazine (Scheme 7). Nucleophilic attack at the cyano C-atom of the 2-cyano group by suitable reagents leads to ring formation, yielding e.g. 2-(Δ²-1, 3-oxazolin-2-yl)-, 2-(benz[d]imidazol-2-yl)- and 2-(1H-tetrazol-5-yl)anthraquinones (Schemes 8 and 10).     

Hydrogen bonds in carbonylated 1,4-dihydropyridines

For H bonds stabilized by π-conjugation in carbonylated 1,4-dihydropyridines, an analysis of the structural data of the Cambridge Structural Databank showed that the hydrogen bond was an essential condition for π-conjugation. It was found that π-delocalization possibly correlated with the bioactivity of drugs that were calcium antagonists. In the presence of two carbonyl groups, hydrogen bonds in crystal are predominantly formed by the carbonyl group that is anti-periplanar to the 1,4-dihydropyridine ring.     

Novel solid-state synthesis of dimeric 4-aryl-1,4-dihydropyridines

On irradiation in the solid state the 4-aryl-1,4-dihydroypridines 1 undergo [2+2] cycloadditon to centrosymmetric head-to-tail dimers 3 and 4a . The almost exclusive formation of the cage dimers 3 via the C₂-symmetric syn-dimers 2 takes place in nearly quantitative yields, in contrast with the cycloaddition reaction of the anti-dimer 4a , which is accompanied by photooxidation to pyridine 5a .     

Ab Initio and in-Crystal Geometry of trans-1,4-Dibromo1,4-dicarboxymethylcyclohexane

The structure of trans-1,4-dibromo-1,4-dicarboxymethylcyclohexane (I) has been determined by single crystal x-ray diffraction. The molecules, located on symmetry centers, are in the rigid chair conformation with the Br and COOCH₃ axial and equatorial, respectively. The molecular geometry observed in the crystal is similar to that calculated for the isolated molecule using ab initio calculations performed at the HF/6-31(d) level. A peculiar arrangement of the carboxymethyl substituents, along with short contacts involving the Br atoms, seem to play a role in the stabilization of the crystalline structure.     

Synthesis and molecular structure of 1,4-dimethyl-4,5,7,8-tetrahydro-6H-imidazo[4,5-e][1,4]-diazepine-5,8-dithione

1,4-dimethyl-4,5,7,8-tetrahydro-6H-imidazo[4,5-e][1,4]-diazepine-5,8-dithione was synthesized by boiling 1,4-dimethyl-4,5,7,8-tetrahydro-6H-imidazo[4,5-e][1,4]-diazepine-5,8-dione (a cyclic homolog of theobromine) with P₂S₅. Its molecular and crystal structures were determined by X-ray structure analysis, PMR spectroscopy and the calculations using the MM2 program. The crystals are monoclinic, sp. gr. P2 ₁ /n with a=9.305(4), b=9.464(3), c=11.628(3) Å, -90.49(3)^o, Z=4 for C₈H₁₀N₄S₂. M.p. 268–269 °C. The 7-membered heterocycle has a boat conformation in the crystal, while in solution at room temperature it undergoes interconversion. The geometrical parameters of the molecule obtained by X-ray structure analysis, by PMR spectroscopy below the coalescence temperature (290 K), and by MM2 calculations are in good agreement.A. V. Bogatsky Physico-Chemical Institute, Ukrainian Academy of Sciences. Translated fromZhurnal Struktumoi Khimii, Vol. 34, No. 3, pp. 86–90, May–June 1993.Translated by T. Yudanova.     

Syntheses and Characterization of 1,4‐Phenylenebisphosphonates,A[HO3PC6H4PO3H2] (A = Li,K, Rb,Cs, Tl,Ag and NH4) and Crystal Structure of 1,4‐Phenylenebisphosphonic Acid

Seven 1,4‐phenylenebisphosphonates of monovalent ions, A(HO₃PC₆H₄PO₃H₂) (A = Li, K, Rb, Cs, Tl, Ag and NH₄), were synthesized and characterized by single‐crystal X‐ray diffraction, spectroscopic and thermal methods. These compounds and the reported sodium analogue have four structure types. The sodium compound, one‐dimensional lithium compound and pillared‐layered cesium compounds have different structure types, whereas the potassium, rubidium, thallium, ammonium and silver compounds have a pillared ladder‐like structure. They undergo initial thermal decomposition in the range of 120–270 °C. Moreover, the single crystal X‐ray structure of 1,4‐phenylenebisphosphonic acid was determined.     

Synthesis,Crystal Structure,and Physical Properties of a Barium(II) p‐(Carboxyl‐methyloxy)‐benzenecarboxylic Acid Complex

A coordination polymer [Ba(pcmb)(H₂O)_2.5] ( 1 ) was obtained by self‐assembly of the corresponding metal carbonate with a flexible ligand, p‐(carboxyl‐methyloxy)‐benzenecarboxylic acid (H₂pcmb), and its structure was determined by single‐crystal X‐ray diffraction studies. The result revealed that complex 1 has a three‐dimensional structure, in which the barium(II) atom takes a distorted eight‐coordinate bicapped anti‐prism arrangement. The pcmb^2– anion acts as a μ₄‐bridge ligand, in which carboxylate groups adopt monodentate and μ₃‐η²:η¹‐bridging two different coordination models to generate a three‐dimensional network structure. The luminescence property and thermal stability of 1 were investigated.     

The crystal structure of 1,4-benzenedithiol by rietveld analysis and studies on the mechanism of solid-state addition polymerization of 1,4-benzenedithiol to 1,4-diethynylbenzene

The crystal structure of 1,4-benzenedithiol (BDT) was determined by the Rietveld method based on the calculation of the atomic coordinates of the BDT molecule using the Molecular Mechanics Program (MMP2). The refined crystal structure of BDT was monoclinic P₂₁/c with dimensions, a = 7.795, b = 7.290, c = 5.955 Å, β = 92.16°, z = 2. The R factor of the refined structure was 0.038. Using above results, the mechanism of solid-state addition polymerization of BDT to 1,4-diethynylbenzene (DEB) was studied. Sublimed BDT piles up onto glass plate substrate and forms the layer structure along with the a axis. An inclination angle of the piled BDT column was 60° toward the substrate surface. DEB crystal structure was also monoclinic P₂₁/c with a = 4.007, b = 6.018; c = 15.340 Å, β = 91.42°, z = 2. Sublimation of equimolar mixture of BDT and DEB gave a crystal having 1 : 1 composition, in which DEB column is situated between the columns of BDT. Relative arrangement of both monomers was suitable for the addition of  SH and  CCH groups, since the distance between the two groups is 3.3 Å by CERIUS II calculation. Therefore, the addition polymerization of BDT to DEB easily proceeded by UV irradiation and the resulting polymer had a highly layer structure along with the a axis of BDT crystal. Tentatively estimated crystal structure of polymer obtained is monoclinic with a = 7.73, b = 7.30, c = 5.95 Å, β = 92.16°. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1621–1625, 1997     

Water-based Synthesis and Properties of a Scandium 1,4-Naphthalenedicarboxylate

A new scandium naphthalenedicarboxylate with the framework composition [Sc₂(1,4-NDC)₃] (H₂-1,4-NDC = 1,4-naphthalenedicarboxylic acid) was obtained under hydrothermal synthesis conditions. A structure model could be developed by a combination of 3D electron diffraction measurements and computationally assisted structure determination, which was further validated by a good agreement with the experimental powder X-ray diffraction pattern. The structure consists of isolated ScO₆ octahedra interconnected by the carboxylate groups of linker molecules to form chains. These chains are connected by the naphthalene-moieties to form a three-dimensional framework with square-shaped pores and the organic group pointing into the pores. Although very similar synthesis conditions were chosen, [Sc₂(1,4-NDC)₃] is not isostructural to aluminum naphthalenedicarboxylate [Al(OH)(1,4-NDC)], which crystallizes in a MIL-53 type structure. This can be traced back to the different inorganic building units that are observed. The compound was thoroughly characterized by elemental analysis, IR spectroscopy, sorption measurements, thermogravimetric analysis and luminescence measurements. [Sc₂(1,4-NDC)₃] exhibits a high thermal stability and a ligand-based blue luminescence in the solid state at room temperature.     

Aqua[N-(6-carboxylato-κO-pyridine-2-carbonyl-κN)-l-histidinato-κ2N,N′]copper(II)

The title compound, [Cu(C₁₃H₁₀N₄O₅)(H₂O)], is an asymmetric and pentacoordinated square-pyramidal copper(II) complex, with a water mol­ecule occupying an apical position. It consists of syn and anti isomers of the apical water mol­ecule with respect to the metal-free carboxyl group on the equatorial ligand. The crystal structure of this complex is a rare example of conformational isomerization, in which the two isomers cocrystallize in a 1:3 ratio of syn to anti mol­ecules in the same lattice.     

Solution and Solid‐State Polymerization of 2,3‐Dicyano‐5,7‐dimethyl‐6H‐1,4‐diazepine

Abstract

2,3‐Dicyano‐5,7‐dimethyl‐6H‐1,4‐diazepine (1) is polymerized to a conjugated structure in solution by both alkaline sugar reagents and butoxide in n‐butanol and in the solid state by thermal annealing. From both infrared and nuclear magnetic resonance spectra, all polymers have a similar chain repeat structure involving polymerization at one of the two cyano groups in the molecular structure of 1. Electronic spectra, gel permeation chromatography (GPC), and thermal analysis further characterize the polymers. The methyl protons of 1 are acidic, and solution polymerization is likely initiated by a delocalized anion derived from 1. This delocalized anion also provides a rationalization for polymerization at only one of the cyano groups of 1 instead of cyclopolymerization. The solid state polymerization leads to an amorphous product in a heterogeneous process. The crystal structure of 1 does not allow formation of an infinite chain. A tautomeric form of 1 likely initiates the solid state polymerization. The tautomerization creates a defect site in the crystal of 1, and the initial addition reaction is likely topochemical.     

Resolution and chiroptical properties of [32](1,4)barrelenophanedicarbonitrile

(±)-[3₂](1,4)Barrelenophane was completely resolved into its enantiomers by HPLC separation using a chiral stationary phase (Chiralcel OD) with hexane/propan-2-ol (1:9). The specific rotations and circular dichroism spectra of (+)- and (−)-[3₂](1,4)barrelenophanes indicated the enantiomeric relationships. The longest absorption band at 360 nm (ε 541, CH₂Cl₂) is identified mainly as AN intramolecular charge transfer band between the benzene ring and the double bond conjugated with cyano groups. The X-ray structure of the (+)-isomer has been determined.     

Synthesis and Structure of Catena-[Bis(2-Methylimidazole)(μ-Phthalato)cobaltate(II)]

A new coordination compound [Co(Pht)(2-MeIm)₂] (I), where Pht^2–is the deprotonated radical of o-phthalic acid (H₂Pht) and 2-MeIm is 2-methylimidazole, was synthesized. Its structure was established using X-ray diffraction analysis. The crystal is orthorhombic: space group Pca2₁, a= 15.350(3), b= 7.957(2), c= 13.997(3) Å, (calcd.) = 1.505 g/cm³, and Z= 4. The tetrahedral coordination of the Co(II) atom includes two N atoms of two 2-methylimidazole molecules and two oxygen atoms of two carboxyl groups from different acid radicals. The Co–N distances are equal to 2.022(2) and 2.031(2) Å, while the Co–O distances are 1.972(2) and 2.000(2) Å. The carboxyl groups of the Pht^2–radical and the aromatic nucleus form angles of 47.2° and 35.9°, whereas the angle formed by the carboxyl groups themselves is 50.3°. Compound Iis a polymer, which is confirmed by the 1,6-bridging function of the o-phthalic acid radical. The Co···Co distance in a chain is equal to 7.367 Å. Separate chains are united in the crystal into a framework via N–H···O hydrogen bonds.     

Mössbauer,far-infrared and Raman spectra of tetrachloro[1,4-di(p-methoxyphenyl)-2,3-dimethyl-1,4-diazabutadiene] tin(IV)

Summary The dependence of the logarithm of the area under the tin-119 Mössbauer resonance (A at different temperatures are normalized toA ₇₇) vs. temperature is measured for tetrachloro[1,4-di(p-methoxyphenyl)-2,3-dimethyl-1,4-diazabutadiene] tin(IV). The slope of the plot of lnA vs.T is –2.46·10^–2K^–1, suggesting a monomeric structure. In the vibrational spectra the significant stretching vibrations agree with acis octahedral configuration of C_2v symmetry.

---

Mössbauer-, Fernes-Infrarot- und Raman-Spektren von Tetrachlor[1,4-di(p-methoxyphenyl)-2,3-dimethyl-1,4-diazabutadien]zinn(IV)

Zusammenfassung Die Abhängigkeit des Logarithmus der Fläche unter der Zinn-119-Mössbauer-Resonanz (A in verschiedenen Temperaturen werden zuA ₇₇ normalisiert) von der Temperatur wurde für Tetrachlor[1,4-di(p-methoxyphenyl)-2,3-dimethyl-1,4-diazabutadien]zinn(IV) gemessen. Der Anstieg lnA gegenT von –2.46·10^–2K^–1 spricht für eine monomere Struktur. In den Vibrations-Spektren stimmen die wichtigsten Dehnungsschwingungen mit einercis-oktaedrischen Konfiguration von C_2v-Symmetrie überein.

     

Synthesis,alkylation, and molecular and crystal structure ofN-methylmorpholinium 6-amino-3,5-dicyano-1,4-dihydropyridine-4-spirocyclohexane-2-thiolate

The reaction of cyano(cyclohexylidene)thioacetamide with cyanothioacetamide or malononitrile andN-methylmorpholine yieldsN-methylmorpholinium 6-amino-3,5-dicyano-1,4-dihydropyridine-4-spirocyclohexane-2-thiolate. Its structure was established based on the results of alkylation and X-ray structural analysis.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2535–2540, October, 1996.     

Photoredox- and Nickel-Catalyzed Hydroalkylation of Alkynes with 4-Alkyl-1,4-dihydropyridines: Ligand-Controlled Regioselectivity

Dual photoredox- and nickel-catalyzed hydroalkylation of terminal alkynes with 4-alkyl-1,4-dihydropyridines under visible light irradiation to afford Markovnikov- or anti-Markovnikov-type alkylated alkenes in good-to-high yields has been achieved, in which the regioselectivity of the products was effectively controlled by coordination ligands for nickel species. Using [NiCl₂(dtbbpy)] as a catalyst led to the formation of Markovnikov-type products, whereas using NiCl₂ ⋅ 6 H₂O led to the formation of anti-Markovnikov-type products.     

Non-coplanar aromatic carboxylic acids: Unusual conformation-dependent self-assembly and pseudopolymorphism of di(3-carboxymesityl)methane

The dicarboxylic acids 3 and 4, i.e., di(3-carboxy-2,4,6-trimethylphenyl)methane and di(3-carboxyphenyl)methane, are created by a methylene tethering of mesitoic acid and benzoic acid, respectively. These diacids may explore two low energy conformations, viz., syn and anti. Whereas the syn-diacid 3 is found to undergo self-assembly in the solid state via a very rare tetrameric motif, the anti-diacid 3 is found to exhibit pseudopolymorphism with guest molecules such as DMSO and PhOH–H₂O. The unusual patterns of assembly and the occurrence of pseudopolymorphism for the syn and anti conformers, respectively, appear to emanate from an unique structural feature that emerges as a consequence of tethering. It appears that the molecules that contain strongly interacting functional groups in non-coplanar aryl rings will suffer from packing problems, which manifests itself in a new mode of packing and the phenomenon of pseudopolymorphism.     

Spectroscopic Properties,Conformation and Structure of Difluorothiophosphoryl Isocyanate in the Gaseous and Solid Phase

Difluorothiophosphoryl isocyanate, F₂P(S)NCO was characterized with UV/vis, NMR, IR (gas and Ar-matrix), and Raman (liquid) spectroscopy. Its molecular structure was also established by means of gas electron diffraction (GED) and single crystal X-ray diffraction (XRD) in the gas phase and solid state, respectively. The analysis of the spectroscopic data and molecular structures is complemented by extensive quantum-chemical calculations. Theoretically, the C_s symmetric syn-conformer is predicted to be the most stable conformation. Rotation about the P−N bond requires about 9 kJ mol⁻¹ and the predicted existence of an anti-conformer is dependent on the quantum-chemical method used. This syn-orientation of the isocyanate group is the only one found in the gas phase and contained likewise in the crystal. The overall molecular structure is very similar in gas and solid, despite in the solid state the molecules arrange through intramolecular O⋅⋅⋅F contacts into layers, which are further interconnected by S⋅⋅⋅N, S⋅⋅⋅C and C⋅⋅⋅F contacts. Additionally, the photodecomposition of F₂P(S)NCO to form CO, F₂P(S)N, and F₂PNCO is observed in the solid Ar-matrix.     

Additionsverbindungen zwischen Antimon(III)-Halogeniden und 1,4-Dithiacycloheptan

Addition Compounds between Antimony(III)-Halides and 1,4-Dithiacycloheptane SbCl₃, SbBr₃, and SbI₃ do form the addition compounds SbCl₃ · 1,4-Dithiacycloheptane, SbBr₃ · 1,4-Dithiaheptane and 2 SbI₃ · 1,4-Dithiacycloheptane from benzene solutions. The new compounds are only stable in the solid form. FIR spectra of the SbCl₃ and SbBr₃ complexes are recorded as well as the X-ray structure of the SbCl₃ compound.