TATB/氟聚物PBX沿不同晶面力学性能的分子动力学模拟

用分子动力学(MD)方法, 模拟计算了著名钝感炸药TATB(1, 3, 5-三氨基-2, 4, 6-三硝基苯)与四种氟聚合物[聚偏二氟乙烯(PVDF)、聚三氟氯乙烯(PCTFE)、氟橡胶(F₂₃₁₁)、氟树脂(F₂₃₁₄)]构成的高聚物粘结炸药(PBX)的力学性能. 结果表明, 在TATB中添加少量氟聚物能有效改善其力学性能; 沿TATB不同晶面与氟聚物“粘结”, 构成PBX的力学性能有所不同, 改善力学性能的整体效应为(010)≈(100)>(001).     

CL-20/HMX共晶及其为基PBX界面作用和力学性能的MD模拟研究

为提高共晶炸药的实际使用价值, 改善其安全性和力学性能, 以CL-20/HMX共晶炸药为基, 分别添加2种高聚物粘结剂Estane 5703(聚氨基甲酸乙酯)和HTPB(端羟基聚丁二烯), 共构建两种共晶基高聚物粘结炸药(PBX)模型, 进行细致的295 K NPT分子动力学(MD)模拟研究. 通过两种PBX模型及其与该共晶炸药的MD模拟结果比较表明, 与基炸药之间的结合能Estane 5703大于HTPB, 预示含少量Estane 5703的PBX稳定性和相容性更佳; 对相关函数g(r)揭示粘结剂与基炸药界面相互作用的方式, 以基炸药中H分别与Estane 5703中羰基O和HTPB中端羟基O之间的氢键较强. 与CL-20/HMX共晶炸药相比, 少量粘结剂Estane 5703或HTPB的加入, 使弹性系数C_ij下降, 拉伸模量(E)、体积模量(K)和剪切模量(G)均显著减小, 而泊松比(ν), 柯西压(C₁₂－C₄₄)和K/G值明显增大, 表明PBXs体系刚性减小, 延展性增强, 力学性能大为改善. 少量粘结剂包覆使PBXs致钝, 主要归因于其隔热、吸热并使体系变“软”的缓冲作用, 而界面作用造成的分子结构引发键键长变化变为次要因素.     

HMX晶体和HMX/F2311 PBXs力学性能的MD模拟研究

用分子动力学方法, 在295 K NVT系综和COMPASS力场下, 对环四甲撑四硝胺(HMX)晶体和F₂₃₁₁沿HMX (001), (010)和(100)晶面所构成PBXs模型的力学性能进行模拟研究. 结果表明, 加入F₂₃₁₁降低了HMX的刚性, 增强了它的延展性. 在HMX (100)面上添加F₂₃₁₁对提高体系的延展性较显著. 为考察温度对力学性能的影响及其机理, 在245～445 K范围完成对HMX (100)/F₂₃₁₁ PBX的MD模拟. 力学分析表明, 随温度增加HMX (100)/F₂₃₁₁的延展性呈抛物线变化规律, 归因于F₂₃₁₁分子链的运动及其构象随温度的变化.     

分子动力学模拟浓度和温度对TATB/PCTFE PBX力学性能的影响

为探讨高聚物粘结炸药(Polymer Bonded Explosive, PBX)的力学性能随温度和高聚物浓度而变化的规律, 用分子动力学(MD)方法和compass力场, 对著名高能炸药1,3,5-三氨基-2,4,6-三硝基苯(TATB)与常用高聚物粘结剂聚三氟氯乙烯(PCTFE)所构成的TATB/PCTFE PBX进行模拟计算. 结果表明, 在一定范围内, 随高聚物浓度的增加, PBX的弹性系数和模量减小, 表明其刚性减小、弹性增加; 而随温度的升高, PBX的刚性减小、弹性增强. 还发现PBX的结合能随浓度增高而增大, 随温度升高而减小.     

PETN基PBX结合能和力学性能的理论研究

PETN(季戊四醇四硝酸酯)是著名的硝酸酯类猛炸药,用量子力学(QM)、分子力学(MM)和分子动力学(MD)方法,计算模拟其与高聚物组成的PBX(高聚物粘结炸药)的结合能和力学性能.以AM1-MO法和MM方法取PETN与系列高聚物的尺寸匹配原子簇模型,经几何全优化计算,发现两种方法求得的结合能彼此线性相关.对PETN超晶胞及其与系列氟聚物组成的双组分PBX,实施COMPASS力场下的分子动力学(MD)周期性模拟,求得其弹性系数、拉伸模量、体模量、剪切模量和泊松比,发现添加少量高聚物确能有效改善炸药的力学性能.     

TATB基PBX结合能的分子动力学模拟

用分子动力学（MD）方法, 模拟计算了四种氟聚合物(聚偏二氟乙烯（PVDF）、聚三氟氯乙烯（PCTFE）、氟橡胶（F₂₃₁₁)、氟树脂(F₂₃₁₄))与TATB(1,3,5- 三氨基- 2,4,6- 三硝基苯)晶体的相互作用. 结果发现, 四种氟聚物与TATB的结合能大小排序为PVDF>F₂₃₁₁>F₂₃₁₄>PCTFE, 各氟聚物在TATB不同晶面上的结合能大小排序为(001)>(010)>(100), 结合能主要由分子间氢键决定.     

HMX/F2311 NPT高聚物粘合炸药力学性能的NPT系综分子动力学模拟研究

本文用分子动力学模拟方法研究了以β型奥克托金(β-HMX)含能材料为基,以氟聚物F2311为粘合剂的高聚物粘合炸药(PBX)的力学性能。β-HMX晶体和以其为基的高聚物粘合炸药的弹性常数均由静态弹性常数分析法计算求得,而工程模量和泊松比则由Reuss平均法导出。根据柯西压和本体模量与剪切模量的比值,发现通过加入少量该种聚合物可有效地提高HMX晶体的延展性。     

TATB基PBX结合能和力学性能的理论研究

以SCF-MO-AM1方法和MM-COMPASS力场, 对TATB (1,3,5-三氨基-2,4,6-三硝基苯)与系列高聚物组成的PBX(高聚物粘结炸药)尺寸匹配原子簇, 分别进行全优化几何构型计算, 发现两种方法求得的结合能存在良好的线性关系. 对TATB (3×3×4)超晶胞及其与系列氟聚物组成的双组分PBX, 实施COMPASS力场下的分子动力学(MD)周期性模拟计算, 首次求得其弹性系数、模量和泊松比, 发现添加少量高聚物即能有效改善炸药的力学性能.     

HTPB与A1不同晶面结合能和力学性能的分子动力学模拟

采用分子力学（MM）和分子动力学（MD）方法,在250、300、350、400、450K,对固体推进剂端羟基聚丁二烯（HTPB）和铝晶胞不同晶面结构所组成的层模型在COMPASS力场下,进行模拟计算,求得结合能和静态力学性能（弹性系数、模量和泊松比）．模拟结果表明,在400K时HTPB与A1（011）面的结合能最大,从综合力学性能优劣上看,各个面从优到劣的排序为（011）〉（221）〉（001）,HTPB与A1的结合能与力学性能具有对应关系,结合能大的力学性能优异,结合能小的力学性能较差．     

HTPB与Al不同晶面结合能和力学性能的分子动力学模拟

采用分子力学(MM)和分子动力学(MD)方法, 在250、300、350、400、450 K, 对固体推进剂端羟基聚丁二烯(HTPB)和铝晶胞不同晶面结构所组成的层模型在COMPASS力场下, 进行模拟计算, 求得结合能和静态力学性能(弹性系数、模量和泊松比). 模拟结果表明, 在400 K时HTPB与Al(011)面的结合能最大, 从综合力学性能优劣上看, 各个面从优到劣的排序为(011)>(221)>(001), HTPB与Al的结合能与力学性能具有对应关系, 结合能大的力学性能优异, 结合能小的力学性能较差.     

TATB/氟聚物PBX力学性能、结合能和爆炸性能的模拟计算

Molecular dynamics （MD） method was used to simulate 1,3,5-triamino-2,4,6-trinitrobenzene （TATB） coated with fluorine containing polymers. The mechanical properties and binding energies of PBXs were obtained. It was found that when the number of chain monomers of fluorine containing polymers was the same, the elasticity of TATB/F2314 was increased more greatly than others and the binding energy of TATB/F2311 was the largest among four PBXs. Detonation heat and velocity of such four PBXs were calculated according to theoretical and empirical formulas. The results show that the order of detonation heat is TATB〉TATB/PVDF〉TATB/F2311〉TATB/ F2314 〉 TATB/PCTFE while the order of detonation velocity is TATB/PVDF 〈 TATB/F2311 〈 TATB/F2314 〈 TATB/PCTFE 〈TATB.     

Anisotropic Reaction Properties for Different HMX/HTPB Composites: A Theoretical Study of Shock Decomposition

Plastic-bonded explosives (PBXs) consisting of explosive grains and a polymer binder are commonly synthesized to improve mechanical properties and reduce sensitivity, but their intrinsic chemical behaviors while subjected to stress are not sufficiently understood yet. Here, we construct three composites of β-HMX bonded with the HTPB binder to investigate the reaction characteristics under shock loading using the quantum-based molecular dynamics method. Six typical interactions between HMX and HTPB molecules are detected when the system is subjected to pressure. Although the initial electron structure is modified by the impurity states from HTPB, the metallization process for HMX does not significantly change. The shock decompositions of HMX/HTPB along the (100) and (010) surface are initiated by molecular ring dissociation and hydrogen transfer. The initial oxidations of C and H within HTPB possess advantages. As for the (001) surface, the dissociation is started with alkyl dehydrogenation oxidation, and a stronger hydrogen transfer from HTPB to HMX is detected during the following process. Furthermore, considerable fragment aggregation is observed, which mainly derives from the formation of new C−C and C−N bonds under high pressure. The effect of cluster evolution on the progression of the following reaction is further studied by analyzing the bonded structure and displacement rate.     

Effect of Vacancy Defects on the Young's Modulus and Fracture Strength of Graphene: A Molecular Dynamics Study

The Young's modulus of graphene with various rectangular and circular vacancy defects is investigated by molecular dynamics simulation. By comparing with the results calculated from an effective spring model, it is demonstrated that the Young's modulus of graphene is largely correlated to the size of vacancy defects perpendicular to the stretching direction. And a linear reduction of Young's modulus with the increasing concentration of mono‐atomic‐vacancy defects (i.e., the slope of ?0.03) is also observed. The fracture behavior of graphene, including the fracture strength, crack initiation and propagation are then studied by the molecular dynamics simulation, the effective spring model, and the quantized fracture mechanics. The blunting effect of vacancy edges is demonstrated, and the characterized crack tip radius of 4.44 Å is observed.     

Study of Defect and Large Thermal Strain Nature in Organic Crystal of Rubidium Hydrogen Phthalate

ＳｔｕｄｙｏｆＤｅｆｅｃｔａｎｄＬａｒｇｅＴｈｅｒｍａｌＳｔｒａｉｎＮａｔｕｒｅｉｎＯｒｇａｎｉｃＣｒｙｓｔａｌｏｆＲｕｂｉｄｉｕｍＨｙｄｒｏｇｅｎＰｈｔｈａｌａｔｅＺＨＡＯＱｉｎｇ－Ｌａｎ；ＨＵＡＮＧＹｉ－Ｓｅｎ（ＦｕｊｉａｎＩｎｓｔｉｔｕｔｅｏｆ...