模板剂对全硅MCM-41介孔分子筛结构的影响

分别采用十六烷基三甲基溴化铵和十六烷基三乙基溴化铵作为模板剂,硅溶胶为硅源,用水热晶化法在碱性（NaOH）介质中合成了MCM-41介孔分子筛样品.通过XRD、N2吸附-脱附、TG-DTA、IR等测试手段对这两种样品进行了对比表征分析.考察了两种不同模板剂对其晶体结构、比表面及孔径大小的影响.实验结果表明,相对于十六烷基三甲基溴化铵做模板剂,采用大头基的十六烷基三乙基溴化铵可以合成较大孔径和孔容（分别为4.72 nm和1.14 cm3•g-1）的MCM-41介孔分子筛,而且具有较窄的孔径分布,因此对于合成大孔径的介孔分子筛MCM-41,十六烷基三乙基溴化铵是一种很好的模板剂.     

介孔材料MCM-41的合成与性能表征

在水热条件下用新的合成控制手段得到孔壁较厚的MCM-41介孔分子筛材料,并采用XRD、N2吸附、TG-DTA、SEM和吡啶程序升温脱附等测试手段对合成的MCM-41样品进行表征,结果表明合成的介孔材料结晶度比较高,具有六方排列的孔道结构,孔径分布较窄,BET表面积较大,样品热稳定性高,吡啶-TPD谱图表明样品具有弱的或中等强度的酸性.用MCM-41作为活性组分制备成催化剂,进行微反活性实验,表明其裂化活性较低,但对柴油有较高的选择性.     

预置晶种合成MCM-41/ZSM-3复合分子筛

以十六烷基三甲基溴化铵和四甲基氢氧化铵为模板剂，以ZSM-3为晶种，在水热条件下合成了同时具有中孔和微孔的复合分子筛MCM-41/ZSM-3。通过XRD、IR、N2吸附脱附等温线和SEM表征，样品的XRD图谱在小角度衍射区和大角度衍射区同时出现了MCM-41和ZSM-3的衍射峰；IR图谱上也同时出现了MCM-41和ZSM-3的吸收谱带，并且合成样品与两种分子筛的机械混合物有明显差别；N2吸附脱附等温线证明样品含中孔和微孔结构，并且微孔直径集中分布在0.7 nm左右，中孔直径集中分布在3.3 nm左右；从SEM照片可以看出，复合分子筛和机械混合物形貌不同，前者为附晶生长或再结晶，后者为均匀分散。     

利用Triton X-100合成介孔二氧化硅及其形貌研究

以非离子型表面活性剂Triton X-100为模板剂,正硅酸乙酯为硅源,合成了介孔二氧化硅分子筛.利用XRD、N2吸附—脱附、SEM、以及TG-DTA对样品进行了表征,结果表明合成的材料具有有序介孔结构、高比表面积及高孔容。同时比较了不同条件下所得产物的形貌结构,并分析了它们的形成机理。     

氨水介质中含Ti的MCM-41介孔分子筛的合成

 在氨水介质中采用TiCl3和正硅酸乙酯合成了含Ti量不同的MCM-41介孔分子筛. 该方法可避免使用昂贵的辅助模板剂,也不需要加入醇来调节水解速度,因而合成过程相对简单、易于控制. 采用XRD和N2吸附-脱附等技术对介孔分子筛的结构进行了表征. 结果表明,合成的MCM-41介孔分子筛的六方介孔有序性好,结晶度高. UV-Vis光谱表明,Ti-MCM-41在200～300 nm间出现了四个清晰可辨的吸收峰,说明Ti原子以多种状态存在于介孔分子筛骨架中.     

Sm-Al-MCM-41分子筛的合成与表征

以十六烷基三甲基溴化铵为模板剂, Na2Si3O7为硅源,采用水热合成方法制备了双金属Sm-Al-MCM-41介孔分子筛,并用XRD, FT-IR, SEM, TG-DTA等方法对样品进行表征.结果表明该分子筛具有典型的MCM-41介孔分子筛特征.     

锌锡双金属掺杂MCM-41的合成及表征

以硅酸钠为硅源, 锡酸钠，硝酸锌为金属源，十六烷基三甲基溴化铵为模板剂，采用直接水热合成法合成出了锌锡双金属同时掺杂的介孔MCM-41。通过ICP﹑XRD、TG-DTA﹑FTIR﹑HRTEM以及BET等技术对材料的结构和性质进行了表征。结果表明，合成的材料具有典型的六方介孔结构，比表面高，孔分布窄，热稳定性较高，且锌锡可能进入介孔MCM-41骨架中。该材料对苯酚羟基化反应具有良好的催化性能，双金属修饰MCM-41催化活性明显优于单组分掺杂。     

混合阳离子-非离子表面活性剂为模板剂合成含沸石次级结构单元的介孔分子筛

利用混合阳离子-非离子表面活性剂为模板剂采用两步晶化法合成了孔壁具有沸石次级结构单元的介孔分子筛，通过XRD、N2吸附-脱附、FT-IR以及异丙苯裂解探针反应等手段对样品进行了表征。结果表明，合成的介孔材料在结构上与相应的M41S材料类似，无微孔沸石相的存在。立方介孔材料具有较高的热稳定性和水热稳定性，在催化异丙苯裂解反应中，六方介孔材料的催化活性明显高于相似条件下用单一表面活性剂为模板剂合成的含沸石次级结构单元的六方介孔材料。     

非水介质中合成介孔分子筛MCM-41

首次采用十六烷基三甲基溴化铵为模板剂、正硅酸乙酯为硅源, 分别使用无机和有机弱碱, 溶剂热晶化法在非水甘油介质中合成了介孔分子筛MCM-41, 通过XRD, N₂吸附-脱附, TG-DTG, IR, SEM等测试手段对样品进行了表征分析, 结果表明在甘油体系中得到的样品具有优良的孔结构性质. 相比于氢氧化钠, 以有机弱碱(无水乙二胺、三乙胺)作为碱源, 可以得到有序性更好、结晶度高的样品, 样品具有较窄的孔径分布.     

AlMCM-41介孔分子筛的合成及表征

以拟薄水铝石为铝源、水玻璃为硅源、十六烷基三甲基溴化铵为模板剂,在110℃时水热晶化合成了含Al的MCM-41介孔分子筛.采用X射线衍射(XRD)、N2吸附-脱附、固体29Si、27Al魔角旋转核磁共振技术(MASNMR)、扫描电镜(SEM)及吡啶吸附傅里叶变换红外(FTIR)光谱技术对AlMCM-41分子筛进行了表征.结果表明:AlMCM-41分子筛具有六方排列的孔道结构,同时具有很高的相对结晶度、比表面积和孔容,且孔分布单一;AlMCM-41分子筛中Si原子在骨架内键合的程度更高,使AlMCM-41分子筛具有更好的骨架晶化程度;同时具有四配位骨架铝,使AlMCM-41介孔分子筛具有适当的酸性.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

钒与糖代谢及糖尿病

微量元素钒作为生物体内必需元素，经证实有很重要的生理学功能，与机体糖代谢有十分密切的关系，且能降低糖尿病动物模型的高血糖，极有可能被开发为治疗糖尿病的药物。     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Synthesis of Tyrosol and Hydroxytyrosol Glycofuranosides and Their Biochemical and Biological Activities in Cell-Free and Cellular Assays

Tyrosol (T) and hydroxytyrosol (HOT) and their glycosides are promising candidates for applications in functional food products or in complementary therapy. A series of phenylethanoid glycofuranosides (PEGFs) were synthesized to compare some of their biochemical and biological activities with T and HOT. The optimization of glycosylation promoted by environmentally benign basic zinc carbonate was performed to prepare HOT α-L-arabino-, β-D-apio-, and β-D-ribofuranosides. T and HOT β-D-fructofuranosides, prepared by enzymatic transfructosylation of T and HOT, were also included in the comparative study. The antioxidant capacity and DNA-protective potential of T, HOT, and PEGFs on plasmid DNA were determined using cell-free assays. The DNA-damaging potential of the studied compounds for human hepatoma HepG2 cells and their DNA-protective potential on HepG2 cells against hydrogen peroxide were evaluated using the comet assay. Experiments revealed a spectrum of different activities of the studied compounds. HOT and HOT β-D-fructofuranoside appear to be the best-performing scavengers and protectants of plasmid DNA and HepG2 cells. T and T β-D-fructofuranoside display almost zero or low scavenging/antioxidant activity and protective effects on plasmid DNA or HepG2 cells. The results imply that especially HOT β-D-fructofuranoside and β-D-apiofuranoside could be considered as prospective molecules for the subsequent design of supplements with potential in food and health protection.     

Ferrocene and ferrocenium modified clays and their styrene and EVA composites

In this work, ferrocene- and ferrocenium-containing salts were employed to modify montmorillonite. X-ray measurements show an increase in the interlayer spacing upon clay modification, which means that the larger and more organophilic cations were inserted into the gallery space of montmorillonite. Attempts to prepare nanocomposites of polystyrene and ethylene vinyl acetate copolymers lead to immiscible systems; the morphology of these systems was elucidated with TEM, XRD and cone calorimetry. The thermal stability of the composites is greater than that of the virgin polymer.