Ionic conduction and dielectric relaxation in polycrystalline Na2SO4

In the present paper, the ionic conductivity and the dielectric relaxation properties of Na₂SO₄ have been investigated by means of impedance spectroscopy measurements over wide ranges of frequencies and temperatures. The frequency dependent impedance data has been modeled by appropriate equivalent circuit representing the bulk and grain boundary properties of the sample. Phase transition temperatures and the activation energies of conduction in different phases have been determined from the temperature dependence of the dc conductivity. Dielectric relaxation has been studied using the complex electric modulus and permittivity formalisms. From the electric modulus formalism it is concluded that the relaxation mechanism is independent of temperature. The dielectric permittivity spectra were analyzed by the Cole–Cole formula where different parameters are determined.     

Preparation,electric conductivity and dielectrical properties of Cu6PS5I-based superionic composites

Composite samples based on microcrystalline Cu₆РS₅I superionic conductors, embedded in matrices of polyvinylacetate, epoxy and conducting glue, are produced. Temperature and frequency studies of complex electric conductivity and dielectric permittivity as well as dielectric loss of the obtained composites are carried out. The effect of differences in the composite production technology on the temperature of a second-order phase transition in the superionic phase, values of electrical conductivity, activation energy and dielectric permittivity is shown.     

Dielectric behaviour of cellulose acetate-based polymer electrolytes

The present work deals with the findings on the dielectric behaviour of cellulose acetate (CA) and its complexes consisting of ammonium tetrafluoroborate (NH₄BF₄) and polyethylene glycol with a molecular weight of 600?g/mol (PEG₆₀₀) that were prepared using the solution casting method. The highest ?? obtained for CA-NH₄BF₄ film was 2.18?×?10^?7 S cm^?1 and enhanced to 1.41?×?10^?5 S cm^?1 with the addition of 30?wt.% PEG₆₀₀. The dielectric behaviours of the selected samples were analyzed using complex impedance Z*, complex admittance A*, complex permittivity ?*, and complex electric modulus M*-based frequency and temperature dependence in the range of 10?Hz?C1?MHz and 303?C363?K, respectively. The variation in dielectric permittivity (?? _r and ?? _i) as a function of frequency at different temperatures exhibits a dispersive behaviour at low frequencies and decays at higher frequencies. The variation in dielectric permittivity as a function of temperature at different frequencies is typical of polar dielectrics in which the orientation of dipoles is facilitated with the rising temperature, and thereby the permittivity is increased. Modulus analysis was also performed to understand the mechanism of electrical transport process, whereas relaxation time was determined from the variation in loss tangent with temperature at different frequencies.     

Phase transitions in CuBiP2Se6 crystals

Investigation results of dielectric (20?Hz–1?MHz) properties of layered CuBiP₂Se₆ crystals are presented. The temperature dependence of the static dielectric permittivity reveals the first-order “displacive” antiferroelectric phase transition at T _c?=?136?K. In the paraelectric phase, at low frequencies, dielectric spectra are highly influenced by the high ionic conductivity with the activation energy of 2473?K (0.21?eV). In the antiferroelectric phase the electrical conductivity and its activation energy (531.1?K (0.045?eV)) are considerably smaller. At low temperatures, the temperature behaviour of the distribution of relaxation times reveals complex freezing phenomena. A part of long relaxation time distribution is strongly affected by external direct current (DC) electric field and it is obviously caused by antiferroelectric domain dynamics.     

The effects of thermal activation on the complex conductivity of Ag2HgI4 in the microwave region

The complex conductivity of polycrystalline Ag₂HgI₄, a superionic conductor, has been measured as a function of temperature at 10, 24 and 70 GHz. Both conductivity and permittivity exhibited sharp changes at the β?α phase transition. The microwave conductivity of the β-phase was found to be insensitive to temperature changes and that of the α-phase has thermal activation energies lower than that of dc. The observed monotonic increasing conductivity, decreasing permittivity, together with thermal activation effects are indicative of hopping ionic transport.     

Structural,electrical conductivity,and transport analysis of PAN–NH<Subscript>4</Subscript>Cl polymer electrolyte system

Poly (acrylonitrile) (PAN) and ammonium chloride (NH₄Cl)-based proton conducting polymer electrolytes with different compositions have been prepared by solution casting technique. The amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. The FTIR analysis confirms the complex formation of the host polymer (PAN) with the salt (NH₄Cl). DSC measurements show a decrease in T_g with the increase in salt concentration. The conductivity analysis shows that the 25 mol% ammonium chloride doped polymer electrolyte has a maximum ionic conductivity, and it has been found to be 6.4 × 10^?3 Scm^?1, at room temperature. The temperature dependence of conductivity of the polymer electrolyte complexes appears to obey the Arrhenius nature. The activation energy (E_a = 0.23 eV) has been found to be low for 25 mol% salt doped polymer electrolyte. The dielectric behavior has been analyzed using dielectric permittivity (ε*), and the relaxation frequency (τ) has been calculated from the loss tangent spectra (tan δ). Using this maximum ionic conducting polymer electrolyte, the primary proton conducting battery with configuration Zn + ZnSO₄·7H₂O/75 PAN:25 NH₄Cl/PbO₂ + V₂O₅ has been fabricated and their discharge characteristics have been studied.     

Ac conductivity study of lithium and potassium diphosphate LiK3P2O7 using impedance spectroscopy

In this work, a LiK₃P₂O₇ ceramic material was prepared by the solid-state reaction method and identified by X-ray diffractometry. The dielectric properties, impedance characteristics, and modulus were studied over a range of frequency (200 Hz to 5 MHz) and temperature (615–708 K). The frequency and temperature dependence of dielectric permittivity, dielectric loss, and electric modulus is studied. The frequency analysis of modulus properties showed a distribution of relaxation times. Conductivity plots against frequency at a higher frequency suggested the response obeying the universal power law. The temperature behavior of the frequency exponents shows that the correlated barrier hopping CBH model is well adapted to this material. The activation energy associated with the impedance relaxation and the electric modulus spectra is close to the activation energy for dc conductivity indicating the similar nature of relaxation and conductivity. Thermodynamic parameters such as free energy of activation, enthalpy, and entropy have been calculated.     

Dielectric properties for the ordered-perovskite cuprate Sr2Cu(Re0.69Ca0.31)O6

Dielectric properties are reported on polycrystalline cubic ordered-perovskite cuprate Sr₂Cu(Re_0.69Ca_0.31)O₆ in the frequency range 10 Hz-100 kHz at temperature from 300 to 500 K. Both the dielectric permittivity and dielectric loss factor are found to be frequency and temperature dependent. The enhanced value of the low frequency dielectric permittivity is associated to ionic polarization and interfacial phenomena. The material is found to possess significantly high dielectric permittivity. The calculated ac conductivity suggests semiconducting behaviour for the Sr₂Cu(Re_0.69Ca_0.31)O₆.     

Dielectric properties of antiferroelectric liquid crystals composed of banana-like molecules

The dielectric properties of an antiferroelectric B₂ phase representing a homolog (n=14) from a series of 4-chloro-1,3-phenylene-bis[4-(4-n-alkylphenyl)aminobenzoates] with banana-like molecules were studied. The temperature dependence of the dielectric relaxation time was measured, and the corresponding activation energy was determined. The kinetics of the dielectric permittivity was studied in the course of the polarization vector variation under the action of a low-slope triangular bias voltage in the entire temperature range of existence of the B₂ phase. Dependence of the dielectric permittivity on the electric field strength (bias voltage) is determined by the presence of two polar subsystems forming the antiferroelectric B₂ phase.     

The ac conductivity and complex impedance of CuO-doped (Ba0.5Sr0.5)TiO3 ceramic

The AC conductivity and complex impedance spectroscopy of CuO-doped (Ba_0.5Sr_0.5)TiO₃ ceramic were investigated. X-ray diffraction analysis showed that CuO-doped (Ba_0.5Sr_0.5)TiO₃ has a perovskite structure without any pyrochlore phase. Frequency dependent dielectric permittivity was discussed at a different temperature range. The activation energy was calculated and discussed through the Arrehnius equation from the ac conductivity with different frequency plots. CuO-doped (Ba_0.5Sr_0.5)TiO₃ ceramics have a negative temperature coefficient of resistivity. Dependence of impedance spectroscopy on frequency and temperature showed that the conduction process in the CuO-doped (Ba_0.5Sr_0.5)TiO₃ ceramic follows the thermally activated conduction mechanism.     

Synthesis and impedance analysis of proton-conducting polymer electrolyte PVA:NH4F

An attempt has been made to prepare a new proton-conducting polymer electrolyte based on poly(vinyl alcohol) doped with ammonium fluoride (NH₄F) by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction and Fourier transform infrared spectroscopy studies. The highest ionic conductivity has been found to be 6.9?×?10^?6?Scm^?1 at ambient temperature (303 K) for 85PVA:15NH₄F polymer electrolyte. The conductance spectra contain a low frequency plateau region and high frequency dispersion region. The dielectric spectra exhibit the low frequency dispersion, which is due to space charge accumulation at the electrode–electrolyte interface. The modulus spectra indicate non-Debye nature of the material. The highest ionic conductivity polymer electrolyte 85PVA:15NH₄F has low activation energy 0.2 eV among the prepared polymer electrolytes.     

巨介电常数氧化物CaCu3Ti4O12的介电和阻抗特性

采用固相烧结法合成了单相巨介电常数氧化物CaCu₃Ti₄O₁₂（CCTO）.用阻抗分析仪分析了10—420 K温度范围内的介电频谱和阻抗谱特性,并结合ZVIEW软件进行了模拟.结果表明：温度高于室温时,频谱出现两个明显的弛豫台阶,低频弛豫介电常数随温度升高而显著增大,表现出热离子极化特点;温度低于室温时,频谱表现出类德拜弛豫,且高、低平台介电常数值基本不随温度变化,表现出界面极化特点和较好的温度稳定性.频谱中依次出现的介电弛豫对应于阻抗谱中 关键词： 3Ti₄O₁₂')" href="#">CaCu₃Ti₄O₁₂ 介电频谱 阻抗谱 Cole-Cole半圆弧     

AC conductivity and dielectric behavior of bulk Furfurylidenemalononitrile

AC conductivity and dielectric behavior for bulk Furfurylidenemalononitrile have been studied over a temperature range (293–333 K) and frequency range (50–5×10⁶ Hz). The frequency dependence of ac conductivity, σ_ac, has been investigated by the universal power law, σ_ac(ω)=Aω^s. The variation of the frequency exponent (s) with temperature was analyzed in terms of different conduction mechanisms, and it was found that the correlated barrier hopping (CBH) model is the predominant conduction mechanism. The temperature dependence of σ_ac(ω) showed a linear increase with the increase in temperature at different frequencies. The ac activation energy was determined at different frequencies. Dielectric data were analyzed using complex permittivity and complex electric modulus for bulk Furfurylidenemalononitrile at various temperatures.     

Dielectric relaxation in complex perovskite oxide BaCo1/2W1/2O3

Polycrystalline BaCo_1/2W_1/2O₃ (BCW) is prepared by the solid-state reaction technique. The X-ray diffraction study of the compound at room temperature reveals the monoclinic phase. The field dependence of the dielectric constant and the conductivity are measured in the frequency range from 50 Hz to1 MHz and in the temperature range from 300 to 413 K. An analysis of the real and imaginary parts of the dielectric permittivity with frequency is performed. The frequency-dependent maxima in the imaginary impedance are found to obey an Arrhenius law with an activation energy=0.86 eV. The frequency-dependent electrical data are also analysed in the framework of the conductivity and modulus formalisms.     

Raman scattering investigations of KY3F10

Single crystals of the fluoride compound KY₃F₁₀ (O_h⁵) were studied by Raman scattering from 40 to 950 K. Group theory analysis predicts 3A_1g + 4E_g + 6F_2g Raman-active modes, but the experimental spectra show two F_2g modes missing. Over the whole temperature range the frequency shifts are negligible whereas the line widths show a strong increase with temperature. Both reversible and irreversible line width behaviour are exhibited for different temperature runs, indicating a complex microscopic phenomenon underlying the creation of defects responsible for these line widths and their interaction with the different phonon modes. An approximate activation energy for defect creation of ΔE ≈︁ 0.3 eV can be obtained from the temperature behaviour of the line widths. This activation energy may be connected with the high-temperature ionic conduction mentioned previously for this crystal.     

Dielectric absorption in mixtures of anisole with some primary alcohols at microwave frequency

Dielectric properties of binary mixtures of anisole with methanol (MeOH), 1-propanol (1-PrOH), 1-butanol (1-BuOH) and 1-heptanol (1-HeOH) over an entire concentration range have been studied at a fixed temperature 40°C. The dielectric constant (ε′) and dielectric loss (ε″) of the binary mixtures of polar liquids have been determined at a microwave frequency of 9.1?GHz. The static dielectric permittivity (ε ₀) of the liquid samples was also determined using a precision LCR meter. Determined values of static dielectric permittivity (ε ₀) and dielectric permittivity (ε*) at 9.1?GHz frequency were used to evaluate relaxation time (τ) and high frequency limit dielectric permittivity (ε _∞). Dielectric parameters were interpreted in terms of molecular interaction between the anisole and alcohol molecules.     

Anisotropy of the ionic conductivity and dielectric response in orthorhombic and monoclinic inorganic fluorides

The anisotropy of the ionic conductivity and permittivity of (1) BaR₂F₈ (R=rare earth element) single crystals with monoclinic BaTm₂F₈ structure and of (2) (β-YF₃ structured) rare earth trifluorides is studied. Single crystals, eutectic composites and ceramics are investigated in a broad temperature range. In the monoclinic BaR₂F₈ crystals, a pronounced anisotropy of the ionic conductivity and a slight anisotropy of the permittivity are found. The fastest ionic transport with the lowest activation energy (0.563 eV) and the highest value of the permittivity are observed along thea axis. The temperature dependencies of the fluoride ion conductivities of various orthorhombic rare earth trifluorides differ only slightly from one another. For the bulky single crystals, the conductivity at 500 °C and the conduction activation enthalpy are equal to 1.1(4)×10⁻⁵ S/cm and 0.75(3) eV, respectively. The ionic conductivity is almost isotropic, but the anisotropy of the permittivity is significant. For the fluorides of both structural types, plausible conduction mechanisms are proposed, networks of most probable conduction paths are presented and the origin of the observed anisotropy of the ionic conductivity is elucidated. Paper presented at the 4th Euroconference on Solid State Ionics, Renvyle, Galway, Ireland, Sept. 13–19, 1997     

Structural Phase Transition and the Dielectric Permittivity of the Model Lipid Bilayer [(CH2)12(NH3)2]CuCl4

Structural phase transitions in the lipid-like bilayer material [(CH₂)₁₂(NH₃)₂]CuCl₄ have been observed using differential thermal scanning. The compound shows an irreversible thermochromic transition at ? 465 K and three reversible transitions at T ₁ = 433 ± 4 K and T ₂ = 411 ± 2 K and T ₃ = 358 K. The transition at 350 K is ascribed to chain melting. The other two correspond to crystalline phase transformation.

Phase (IV) T₃ = 358 ± 2K Phase (III) T₂ = 411 ± 2K Phase (II) T₁ = 433 ± 4K Phase (I)

Dielectric permittivity is studied as a function of temperature in the range 300-440 K and frequency, range (60 Hz-100 kHz). It confirms the observed transitions. The dielectric permittivity reflects rotational and conformational transitions for the compound. The variation of the real part of the conductivity with temperature is thermally activated in the temperature range above 350 K, with frequency-dependent activation energy, the values of activation energy lie in the range of ionic hopping. The dependence of the conductivity on frequency follows the universal power law σ = σ₀ + A(T) ω ^{s ( T )} with 0<s<1. Comparison of this material with other members of the series is discussed     

Impact of MoO3 concentration,frequency and temperature on the dielectric properties of zinc phosphate glasses

Phosphate glasses with the chemical composition of 47P₂O₅–24ZnO-(29-x)Na₂O-xMoO₃, x = 0, 2, 4, 6, 8 and 10, have been prepared using the melt quenching technique. Dielectric properties of these phosphate glasses are carried out in the frequency range from 1 to 100 kHz at different temperatures. Dielectric parameters such as dielectric constant ε′, dielectric loss ε′′ and ac conductivity of the investigated glasses have been evaluated. The dependences of these dielectric parameters on frequency, composition and temperature have been discussed. It is found that dielectric constant decreases with increasing frequency due to the reduction of space-charge polarization and dipole polarization. The dependence of ac conductivity on the MoO₃ content indicates a competition between electronic and ionic conduction. The temperature dependence of the dielectric parameters reveals a rising trend of the dielectric parameters with temperature. This rising trend is indicated due to the increase of the amplitude of the thermal vibration of the charge carriers which facilitates the electron hopping and drifting of the mobile ions. The linear trend of the ln(σ_ac)-1000/T plot indicates that ac conductivity of the investigated glasses is thermally-activated transport process and follows the Arrhenius equation. The activation energy and its composition dependence have been reported.     

New Measuring Apparatus for Complex Permittivity at Millimeter-Wave Frequencies

A dielectric rod resonator excited by a nonradiative dielectric waveguide is used for measuring complex permittivity of low loss dielectric materials. The complex permittivties of single crystal sapphire, polycrystalline Ba (Mg_1/2 W_1/2) O₃ and Mg₂ Al₄ Si₅ O₁₈ (cordierite) have been obtained at 60 and 77 GHz by the new apparatus. The first time the measurement results of complex permittivity of brain grey and white matters from 15 to 50GHz utilizing a two-port microstrip test fixture is presented. S-parameters of Test fixture are simulated employing the finite-element method. A new spectrometer for the precision measurement of dielectric permittivity and loss tangent, which is capable of providing high resolution data for the first time over an extended W-band (68-118 GHz) frequency for specimens with a large range of absorption values, including highly absorbing specimens that otherwise would not be possible.