Stackable luminescent device integrating blue light emitting diode with red organic light emitting diode

We present a novel stackable luminescent device integrating a blue light emitting diode(LED)with a red organic LED(OLED)in series.The anode of the OLED is connected with the cathode of the LED through a via in the insulation layer on the LED.The LED–OLED hybrid device is electroluminescent and two electroluminescence(EL)peaks(the blue peak around 454 nm and the red peak around 610 nm)are observed clearly.The effect of the indium tin oxide(ITO)layer on the device performance is analyzed.Compared with the individual LED and OLED,their combination shows great potential applications in the field of white lighting,plant lighting,and display.     

Effect of encapsulation technology on organic light emitting diode lifetime

A kind of green organic light-emitting diodes (OLED) was prepared via vacuum thermal evaporation, of which the multilayer structure was indium-tin oxide (ITO)/copper-phthalocyanine (CuPc) (200 Å)/N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (α-NPD) (600 Å)/N′-diphenyl-N,N′-tris(8-hydroxyquinoline) aluminium (Alq3) (400 Å):10-(2-benzothiazolyl)-1,1,7,7-tetramethyl-2,3,6,7-tetrahydro-1H,5H,11H-(l)benzopyropyrano(6,7,8-i, j)quinolizin-11-one (C545T) (2%)/Alq3 (200 Å)/LiF (10 Å)/Al (1000 Å). And we used both traditional glass encapsulation and thin film encapsulation (TFE) technologies to protect the device, reducing impact of vapor and oxygen. Organic film offered an excellent surface morphology, while inorganic film was nearly a perfect barrier to vapor and oxygen. Both of them constituted the encapsulation unit of TFE. According to the results of acceleration life test, the operation lifetime of device using TFE was 22% less than that of device using traditional glass cap encapsulation. So, the technology of TFE should be optimized further, and the quality of TFE needs a great improvement. There is a long way to go and a lot of hard work before realizing flexible display with OLED, but the dream will be true one day.     

Effect of thickness variation of hole injection and hole blocking layers on the performance of fluorescent green organic light emitting diodes

In this paper we present the effect of thickness variation of hole injection and hole blocking layers on the performance of fluorescent green organic light emitting diodes (OLEDs). A number of OLED devices have been fabricated with combinations of hole injecting and hole blocking layers of varying thicknesses. Even though hole blocking and hole injection layers have opposite functions, yet there is a particular combination of their thicknesses when they function in conjunction and luminous efficiency and power efficiency are maximized. The optimum thickness of CuPc (Copper(II) phthalocyanine) layer, used as hole injection layer and BCP (2,9 dimethyl-4,7-diphenyl-1,10-phenanthroline) used as hole blocking layer were found to be 18 nm and 10 nm respectively. It is with this delicate adjustment of thicknesses, charge balancing is achieved and luminous efficiency and power efficiency were optimized. The maximum luminous efficiency of 3.82 cd/A at a current density of 24.45 mA/cm² and maximum power efficiency of 2.61 lm/W at a current density of 5.3 mA/cm² were achieved. We obtained luminance of 5993 cd/m² when current density was 140 mA/cm². The EL spectra was obtained for the LEDs and found that it has a peaking at 524 nm of wavelength.     

Pure red emission of dye-doped organic molecules from microcavity organic light emitting diode

Organic red emitting diode was fabricated by using 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro-1 H,5H-benzo[ij]quinolizin-8-yl)vinyl]-4H-pyran (DCM)-doped tri-(8-quinolitolato) aluminum (Alq₃) as emitter with the structure of G/ITO/NPB(25 nm)/DCM:Alq₃(55 nm)/Alq₃(20 nm)/LiF (1.2 nm)/Al(84 nm), (glass/indium–tin-oxide/4,4-bis-[N-(1-naphthyl)-N-phenyl-amino]biphenyl, G/ITO/NPB), the wavelength of the maximal emission of which is 615 nm. By introducing cavity to Organic light emitting diode (OLED), we got pure red emitting diode with wavelength of the maximal emission of 621 nm and full-width at half-maximum (FWHM) of 27 nm. As far as we know, it is the best result in the dye-doped organic red emitting diode. We also made a device of G/ITO/NPB(25 nm)/DCM:Alq₃(29 nm)/DCM:PBD(26 nm)/Alq₃(20 nm)/LiF(1.2 nm)/Al(84 nm), in order to compare the performance of Alq₃ with that of 2-(4-biphenylyl)-5-(4-t-butylphenyl)-1,3,4-oxadiazole (PBD) as host material. It was found that the performance of device A is better than that of C both in brightness and color purity,as well as in EL efficiency.     

光子晶体发光二极管

利用光子晶体的光子禁带和光栅衍射效应可以提高LED的出光效率,扩大LED的应用范围。总结了光子晶体发光二极管的原理和典型器件。通过比较表明,与光子禁带效应相比,利用光栅衍射效应提高LED出光效率的方法更适用于电注入发光。因此可望用更廉价的方法在LED表面制造光子晶体,可通过光栅衍射效应来有效地提高其出光效率。     

Transparent manganite films as hole injectors for organic light emitting diodes

Organic light-emitting diodes (OLEDs) are nowadays one of the most attractive devices based on organic semiconductors due to their successful application in the display technology. Electroluminescence in OLEDs is mainly governed by the fluorescence from excited singlet states, which have large transition probabilities providing the major radiative pathway. The “forbidden” triplet state emission can be activated by increasing spin–orbit coupling via dye doping. The singlet–triplet exciton formation statistics is usually given by 1:3 partition due to the quantum constrains.

Injection of carriers with finite spin polarisation should influence and modify the recombination statistics and can be used for tuning of the device efficiency. In this context, the development of a new class of electrodes able to guarantee both efficient charge and spin injection becomes of paramount importance. We show that strongly spin polarised colossal magnetoresistance manganite La_0.7Sr_0.3MnO₃ (LSMO) can successfully substitute conventional ITO electrodes in OLEDs. Highly transparent, metallic and ferromagnetic LSMO layers were used in combination with standard Al and spin polarised Co top electrodes. Electrical and optical characterisations of the OLEDs with spin polarised electrodes indicate the applicability of the new manganite electrodes for organic light-emitting devices.     

New double graded structure for enhanced performance in white organic light emitting diode

This study presents a new design that uses a combination of a graded hole transport layer (GH) structure and a gradually doped emissive layer (GE) structure as a double graded (DG) structure to improve the electrical and optical performance of white organic light-emitting diodes (WOLEDs). The proposed structure is ITO/m-MTDATA (15 nm)/NPB (15 nm)/NPB: 25% BAlq (15 nm)/NPB: 50% BAlq (15 nm)/BAlq: 0.5% Rubrene (10 nm)/BAlq: 1% Rubrene (10 nm)/BAlq: 1.5% Rubrene (10 nm)/Alq₃ (20 nm)/LiF (0.5 nm)/Al (200 nm). (m-MTDATA: 4,4′,4″ -tris(3-methylphenylphenylamino)triphenylamine; NPB: N,N′-diphenyl-N,N′-bis(1-naphthyl-phenyl)-(1,1′-biphenyl)-4,4′-diamine; BAlq: aluminum (III) bis(2-methyl-8-quinolinato) 4-phenylphenolate; Rubrene: 5,6,11,12-tetraphenylnaphthacene; Alq₃: tris-(8-hydroxyquinoline) aluminum). By using this structure, the best performance of the WOLED is obtained at a luminous efficiency at 11.8 cd/A and the turn-on voltage of 100 cd/m² at 4.6 V. The DG structure can eliminate the discrete interface, and degrade surplus holes, the electron-hole pairs are efficiently injected and balanced recombination in the emissive layer, thus the spectra are unchanged under various drive currents and quenching effects can be significantly suppressed. Those advantages can enhance efficiency and are immune to drive current density variations.     

Optical design and optimization of light emitting diode automotive head light with digital micromirror device light emitting diode

This research proposes a new method for light emitting diode automotive headlight design with digital micromirror device (DMD). The optical design is advanced because of the following features. First, this optical design controls the angle of light pattern without light masking so as to achieve much higher light efficiency compared with traditional optical design for headlight systems. Second, in view of the tendency that the advanced light emitting diode automobile headlight is designed to be a low beam light module and a high beam light still needs an auxiliary lighting system, the optical system designed in this research, mainly adopting DMD module as high/low beam light switch, can switch on and off both the high and low beam lights. Because DMDs function of accepting a bidimensional image, high/low beam light patterns can be determined by DMD. Third, a light pattern will be created and compensated simultaneously by DMD, which might replace mechanical adaptive front-lighting system in the future because DMD takes advantage of fast response and simultaneous compensation. Fourth, a design using a multiple reflection curved mirror is employed in this research to adjust light energy distribution; therefore, the articulation of the light pattern can be enhanced. For this method, experimental results of light efficiency are up to 85%, which is superior to current products in the market.     

Quasi-homoepitaxial GaN-based blue light emitting diode on thick GaN templateQuasi-homoepitaxial GaN-based blue light emitting diode on thick GaN templateQuasi-homoepitaxial GaN-based blue light emitting diode on thick GaN templateQuasi-homoepitaxial GaN-based blue light emitting diode on thick GaN template

The high power GaN-based blue light emitting diode （LED） on an 80%tm-thick GaN template is proposed and even realized by several technical methods like metal organic chemical vapor deposition （MOCVD）, hydride vapor-phase epi- taxial （HVPE）, and laser lift-off （LLO）. Its advantages are demonstrated from material quality and chip processing. It is investigated by high resolution X-ray diffraction （XRD）, high resolution transmission electron microscope （HRTEM）, Rutherford back-scattering （RBS）, photoluminescence, current-voltage and light output-current measurements. The width of （0002） reflection in XRD rocking curve, which reaches 173＂ for the thick GaN template LED, is less than that for the conventional one, which reaches 258＂. The HRTEM images show that the multiple quantum wells （MQWs） in 80%tm- thick GaN template LED have a generally higher crystal quality. The light output at 350 mA from the thick GaN template LED is doubled compared to traditional LEDs and the forward bias is also substantially reduced. The high performance of 80-~m-thick GaN template LED depends on the high crystal quality. However, although the intensity of MQWs emission in PL spectra is doubled, both the wavelength and the width of the emission from thick GaN template LED are increased. This is due to the strain relaxation on the surface of 80%tin-thick GaN template, which changes the strain in InGaN QWs and leads to InGaN phase separation.     

The use of a perylenediimide derivative as a dopant in hole transport layer of an organic light emitting device

A perylene diimide (PDI) derivative was used as a dopant in the hole transport layer (HTL) of an organic light emitting device. The HTL examined was poly (N-vinylcarbazole) (PVK) and the PDI used was N,N′-di-dodecylperylene-3,4,9,10-bis-(dicarboximide), (N-DODEPER). The structure of the device was ITO/PEDOT:PSS (70 nm)/PVK:N-DODEPER(0, 0.2, 0.4, 0.8 wt.%) (65 nm)/Alq₃ (35 nm)/LiF (1.3 nm)/Al (100 nm). 0.8 wt.% N-DODEPER presence exhibited a luminous efficiency of 7.87 cd/A and an external quantum efficiency of 0.78% at 21 mA/cm² and a power efficiency of 3l m/W at 12 mA/cm². The luminous and power efficiency values were significantly enhanced by a factor of 15 with respect to that of undoped device.     

Electronic properties of phenanthrimidazoles as hole transport materials in organic light emitting devices and in photoelectron transfer to ZnO nanoparticles

Phenanthrimidazoles as hole transport materials have been synthesized, characterized, and applied as nondoping emitters in organic light emitting devices. The synthesized molecules possess high fluorescent quantum yield and thermal properties and display film forming abilities. The highest occupied molecular orbital (HOMO) energies of these materials are shallower than the reported tris(8‐hydroxyquinoline)aluminum (Alq₃), which enables the hole transport ability of these phenanthrimidazoles. Taking advantage of the thermal stability and hole transporting ability, these compounds can be used as a functional layer between NPB [4,4‐bis(N‐(1‐naphthyl)‐N‐phenylamino)biphenyl] and Alq₃ layers and show that these phenanthrimidazoles can be alternatively used as novel hole transport materials and to improve the device performances. Geometrical, optical, electrical, and electroluminescent properties of these molecules have been probed. Further, natural bond orbital, nonlinear optical materials (NLO), molecular electrostatic potential, and HOMO–lowest unoccupied molecular orbital (LMO) energy analysis have been made by density functional theory (DFT) method to support the experimental results. Hyperpolarizability analysis reveals that the synthesized phenanthrimidazoles possess NLO behavior. The chemical potential, hardness, and electrophilicity index of phenanthrimidazoles have also been computed by DFT method. Photoinduced electron transfer explains the enhancement of fluorescence by nanoparticulate ZnO, and the apparent binding constant has been obtained. Adsorption of the fluorophore on ZnO nanoparticle lowers the HOMO and LUMO energy levels of the fluorophore. The strong adsorption of the phenanthrimidazoles on the surface of ZnO nanocrystals is likely due to the chemical affinity of the nitrogen atom of the organic molecule to Zn(II) on the surface of nanocrystal. Copyright © 2013 John Wiley & Sons, Ltd.     

磁场对基于Co铁磁薄膜的有机发光器件效率和电流的影响

制备结构为ITO/Co/NPB/Alq₃/LiF/Al的有机发光器件,测量了室温下磁场对器件发光效率和电流的影响.发现磁场强度小于80 mT时,器件发光效率随磁场强度的增加而增大,最大为18.8%,随磁场强度的继续增加发光效率的增强趋于饱和.效率的增加是Co的自旋极化的注入和磁场效应共同作用的结果,其中自旋极化注入起主要作用.在磁场强度小于60 mT时电流随磁场增强而增加,最大为6.9%,随磁场强度的进一步增加电流的增加有所减弱.产生这种现象的原因可归结为磁场相关的单线态极化子对的解 关键词： 有机电致发光 自旋极化 磁场效应     

Deep blue organic light emitting diode based on anthracene derivative as a dopant

This letter presents a deep blue organic light emitting diode which was fabricated by using 9,10-di(2-naphthyl)anthracene as a dopant and 4,4′-N,N′-dicarbazole-biphenyl as a host. The Commission Internationale de l’Eclairage coordinates of (0.1516, 0.0836) were achieved in the cell, which is very close to the National Television Standards Committee standard of (0.14, 0.08). Meanwhile, maximum luminance over 6500 cd/cm² and maximum current efficiency of 3.5 cd/A were also obtained.     

Pure blue emission from undoped organic light emitting diode based on anthracene derivative

This paper presents organic light emitting diodes (OLEDs) which were fabricated by using undoped 9,10-di(2-naphthyl)anthracene (ADN) as the emitting layer, N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-amine (TPD) as the hole transporting layer, and one of tris-(8-hydroxy-quinolinato) aluminum (Alq₃), 4,7-diphenyl-1,10-phenanthroline (Bphen) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) as the electron transporting layer. By optimization for the thickness of device, efficient pure blue organic light emitting diodes were obtained, which is attributed to the synergy of both the hole transporting layer and the electron transporting layer.     

Characteristics of InGaN light emitting diode depending on Si-doping on InGaN layers below quantum wells

Effect of Si-doping on InGaN layers below the quantum wells (QWs), which cause different levels of charge concentration in the depletion region, have been investigated for InGaN light emitting diodes (LEDs). Four groups of InGaN LEDs with different levels of Si-doping on InGaN/GaN layers below quantum-wells have been produced for the experiment (i.e., 0.5 × 10¹⁷ cm^?3 for group A, 1 × 10¹⁷ cm^?3 for group B, 5 × 10¹⁷ cm^?3 for group C, and 1 × 10¹⁸ cm^?3 for group D.) The reverse leakage current of LED can be significantly decreased and the light output power of LED can be enhanced by lowering the background charge concentration in the depletion region of LED. Such result enables us to improve the device lifetime by inhibiting the degradation of the GaN-based LED.     

Synthesis and characterization of organic/inorganic heterostructure films for hybrid light emitting diode

Thin-film light emitting devices based on organic materials have been gathering attentions for applying a flat-panel display and a solid-state lighting. Alternatively, inorganic technologies such as Si-based thin-film technology have been growing almost independently. It is then expected that combining the Si-based thin-film technology with the organic light emitting diode (OLED) technology will develop innovative devices. Here, we report syntheses of the hybrid light emitting diode (LED) with a heterostructure consisting of p-type SiC_x and tris-(8-hydroxyquinoline) aluminum films and characterization for the hybrid LEDs. We present the energy diagram of the heterostructure, and describe that the use of high dark conductivities of the p-type SiC_x as well as inserting wide-gap intrinsic a-SiC_x at the p-type SiC_x/Alq interface are effective for improving device performance.     

Advantages of an InGaN-based light emitting diode with a p-InGaN/p-GaN superlattice hole accumulation layer

P-InGaN/p-GaN superlattices (SLs) are developed for a hole accumulation layer (HAL) of a blue light emitting diode (LED). Free hole concentration as high as 2.6×1018 cm-3 is achieved by adjusting the Cp2Mg flow rate during the growth of p-InGaN/p-GaN SLs. The p-InGaN/p-GaN SLs with appropriate Cp 2 Mg flow rates are then incorporated between the multi-quantum well and AlGaN electron blocking layer as an HAL, which leads to the enhancement of light output power by 29% at 200 mA, compared with the traditional LED without such SL HAL. Meanwhile, the efficiency droop is also effectively alleviated in the LED with the SL HAL. The improved performance is attributed to the increased hole injection efficiency, and the reduced electron leakage by inserting the p-type SL HAL.     

发光层和空穴传输层对白色电致发光器件性能的影响

利用电子传输性能良好的苯并噻唑螯合锌(Zn(BTZ)₂)作为蓝光层，通过设计不同类型的空穴传输层并试验不同厚度的发光层后，制作了一种最佳厚度的双发光层白色电致发光器件：氧化铟锡(ITO)/N-N′-双(3-甲基苯基)-N-N′-二苯基-1-1′-二苯基-4-4′-二胺(TPD)∶N,N′-二(1-萘基)-N,N′-二苯基-1,1′-联苯-4-4′-二胺(NPB)(1∶0.0 关键词： 厚度 空穴传输层 白光 载流子     

Effect of surface treatment of GaN based light emitting diode wafers on the leakage current of light emitting diode devices

To form low-resistance Ohmic contact to p-type GaN, InGaN/GaN multiple quantum well light emitting diode wafers are treated with boiled aqua regia prior to Ni/Au (5~nm/5~nm) film deposition. The surface morphology of wafers and the current--voltage characteristics of fabricated light emitting diode devices are investigated. It is shown that surface treatment with boiled aqua regia could effectively remove oxide from the surface of the p-GaN layer, and reveal defect-pits whose density is almost the same as the screw dislocation density estimated by x-ray rocking curve measurement. It suggests that the metal atoms of the Ni/Au transparent electrode of light emitting diode devices may diffuse into the p-GaN layer along threading dislocation lines and form additional leakage current channels. Therefore, the surface treatment time with boiled aqua regia should not be too long so as to avoid the increase of threading dislocation-induced leakage current and the degradation of electrical properties of light emitting diodes.     

基于氧化锌纳米线的紫外发光二极管

构建了基于n-ZnO纳米线/p-Si异质结的紫外发光二极管.ZnO纳米线准阵列采用水热法生长于重掺p型Si片上.此法简易，反应温度低，易于大规模生产；其产物ZnO纳米线结晶良好，以c轴为优势取向，光激发下的紫外荧光发射很强.二极管的电学接触采用聚合物填充的In阴极或以氧化铟锡(ITO)玻璃紧压形成阴极.它们的I-V特性体现出良好的二极管性质.在正向偏置电压驱动下，构建的发光二极管可稳定发射波长在387nm的较强的近紫外光和较弱的绿光. 关键词： ZnO纳米线 异质结 电致发光 水热法