Reactions of indoles with nitrogen dioxide and nitrous acid in an aprotic solvent

The reaction of 2-phenyl- and 1-methyl-2-phenylindole with nitrogen dioxide or with nitrous acid (NaNO2-CH3COOH) in benzene leads mainly to the formation of the isonitroso and 3-nitroso indole derivatives, respectively. When reacted with nitrous acid, 1-methyl-2-phenylindole gives also the corresponding azo-bis-indole in good yields. The reaction of indole with nitrogen dioxide leads to 2-(indol-3-yl)-3H-indol-3-one as the main product together with small amounts of 2-(indol-3-yl)-3H-indol-3-oxime; whereas the major product obtained when the same indole is reacted with nitrous acid is represented by 2-(indol-3-yl)-3H-indol-3-oxime. The reaction of 3-alkyl substituted indoles with nitrogen dioxide is rather complex and results in the formation of different nitro indoles, whereas nitrosation is observed when nitrous acid is used. Crystal structures of 2-(indol-3-yl)-3H-indol-3-one and of 4-nitro-N-acetyltryptamine have been determined by X-ray analysis.     

负载型三氧化钼催化剂表面结构和表面酸位的激光Raman光谱研究

测定了MoO3/γ-Al2O3、MoO3/TiO2、MoO3/SiO2的激光Raman谱. 通过MoO3/γ-Al2O3、MoO3/TiO2在吡啶吸附前后、氨水提取前后的谱图对比说明, 单层分散的MoO3, 即特征峰为～950cm^-^1的"二维聚钼酸"中钼的配位状态不是单一的,其中一种表面含钼物种(Mo-1)不吸附吡啶, 不溶于氨水, 不显示较强的表面酸性; 另一种表面含钼物种(Mo-2)可吸附吡啶, 溶于氨水, 与催化剂的表面酸位密切相关. 我们认为Mo-1为四面体配位的钼; Mo-2为八面体配位的钼. MoO3/SiO2中的MoO3能100%被氨水溶去, 其酸位数与表面Mo^6^+数之比接近1, 是由其中Mo-2的比例较高, 载体与活性组分之间的相互作用较弱这两个因素所造成的。     

CO2选择性氧化甲烷制C2烃催化剂La2O3/ZnO的氧化还原和CO2吸附性能

Ｌａ２Ｏ３／ＺｎＯ催化剂体系在以二氧化碳作为氧化剂的甲烷氧化偶联反应中具有很高的Ｃ２烃选择性和稳定性．采用ＣＯ２－ＴＰＤ－ＭＳ和ＴＰＲ技术考察了Ｌａ２Ｏ３／ＺｎＯ对ＣＯ２的吸附性质及其氧化还原行为．结果表明：（１）Ｌａ２Ｏ３／ＺｎＯ催化剂体系存在着强、弱两种碱中心，其中弱碱中心数量随样品中Ｌａ２Ｏ３含量增加而减少，强碱中心强度随样品中Ｌａ２Ｏ３含量增加而增强．（２）由于组分相互作用，高温下，Ｌａ２Ｏ３／ＺｎＯ易产生晶格氧空位，使之对ＣＯ２的吸附增强，吸附后的ＣＯ２与晶格氧作用形成立方晶型Ｌａ２Ｏ２ＣＯ３．（３）Ｌａ２Ｏ３／ＺｎＯ表面的Ｌａ３＋和Ｚｎ２＋可以部分被还原，由于组分间的相互作用，使得二者的还原都较单一组分存在时更难．（４）Ｈ２－ＣＯ２－Ｈ２氧化还原循环实验表明，Ｌａ２Ｏ３／ＺｎＯ表面被部分还原后，ＣＯ２可以将部分被还原的表面再氧化．在此基础上对Ｌａ２Ｏ３／ＺｎＯ催化剂上甲烷与ＣＯ２转化为Ｃ２烃的机制也进行了讨论．     

NF3 decomposition over some metal oxides in the absence of water

NF3 decomposition in the absence of water over Al2O3, Fe2O3, Co3O4 and NiO, and transition metal oxides (Fe2O3, Co3O4 and NiO) coated Al2O3 reagents was investigated. The results show that Al2O3 is an active reagent for NF3 decomposition with 100% conversion lasting for 8.5 h at 400 ℃. Fe2O3, Co3O4 and NiO coated Al2O3 reagents are superior to bare Al2O3, and 5%Co3O4/Al2O3 has a high reactivity with NF3 full conversion maintaining for 10.5 h. It is suggested that the presence of transition metal oxide is beneficial to the reactivity of Al2O3, and results in a significant enhancement in the fluorination of Al2O3.     

Reactions of the Dirhenium(II) Complexes Re(2)X(4)(&mgr;-dppm)(2) (X = Cl, Br; dppm = Ph(2)PCH(2)PPh(2)) with Isocyanides. 11.(1) A Triply Bonded Dirhenium Complex Containing a Labile Acetonitrile Ligand. Synthesis, Structural Characterization, and Reactivity of [(XylNC)(CH(3)CN)ClRe(&mgr;-dppm)(2)ReCl(2)(CO)]O(3)SCF(3)

The reaction of the open bioctahedral form of Re(2)Cl(4)(&mgr;-dppm)(2)(CO)(CNXyl) (1), where XylNC = 2,6-dimethylphenyl isocyanide, with TlO(3)SCF(3) in the presence of acetonitrile proceeds with retention of stereochemistry at the dirhenium unit to afford the complex [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)(NCCH(3))]O(3)SCF(3) (3). The single-crystal X-ray structure determination of 3 shows that a Re&tbd1;Re bond is retained (the Re-Re distance is 2.378(3) ?) and that it is the chloride ligand trans to the XylNC ligand of 1 which is labilized. Complex 1 reacts with TlO(3)SCF(3) in a noncoordinating solvent to produce the unsymmetrical complex [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)]O(3)SCF(3) (2), through loss of this same chloride ligand of 1 and CO transfer from the adjacent Re center. The acetonitrile ligand of 3 is very labile and is readily displaced by XylNC and t-BuNC, with retention of stereochemistry, to produce complexes of stoichiometry [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)(CNR)]O(3)SCF(3) (R = Xyl, 4a; R = t-Bu, 4b). In a noncoordinating solvent, the nitrile ligand of 3 is lost and 2 is formed following CO transfer; this conversion is reversed upon the reaction of 2 with acetonitrile. When 3 is treated with CO, the acetonitrile ligand is again displaced, but in this instance the reaction is accompanied by a structure change to produce an edge-sharing bioctahedral complex of the type [Re(2)(&mgr;-CO)(&mgr;-Cl)(&mgr;-dppm)(2)Cl(2)(CO)(CNXyl)]O(3)SCF(3) (5).     

四电极法测量Na_3AlF_6-Al_2O_3-RE_2O_3熔体的电导率

为了排除和减小电极与熔体接触面间的阻抗,电极与连接导线的电阻以及石英电导池腐蚀的影响,本文用交流四电极法测量了熔体Na_3Na_3AlF_6-Al_3O_3-RE_2O_3的电导率,其中RE指以Ce为主的混合稀土。 实验装置如图1所示,电极为φ0.8mm的Pt和Pt-Rh丝(其中二根Pt、二根Pt-Rh),中     

RhCo双金属催化剂的研究 I. RhCo双金属催化剂的金属-金属及金属-载体相互作用

利用XPS对以金属盐共浸渍制备的Rh+Co/Al2O3和Rh2Co2(CO)12为前体制备的Rh2Co2/Al2O3催化剂的金属-金属及金属-载体相互作用进行了详细研究。发现Rh+Co/Al2O3经400℃H2还原后, Rh的结合能与Rh^0的结合能接近, Co基本上以CoAl2O4状态存在, Co^0的谱峰很弱; 而Rh2Co2/Al2O3经400℃H2还原后, Rh的结合能与Rh^0接近, Co除以CoAl2O4状态存在外, 还有相当一部分以Co^0状态存在。上述结果揭示出两个样品的Rh-Al2O3的相互作用弱, Co-Al2O3的相互作用强。Rh+Co/Al2O3上Rh-Co相互作用弱, 而Rh2Co2/Al2O3在H2还原后仍保持RhCo簇合物的强的Rh-Co相互作用, 导致显著量的Co^0存在。     

A New High Efficiency Green Luminescent Material──the System Al_2O_3-B_2O_3 Containing Ce~(3 ) and Tb~(3 ) Ions

IntroductionThelundnescenceofrare-earth-dopedcompoundshasbeenstudiedextensivelyduringthelastdecade,especiallyontrivalentceriumandterbiumandontheenergytransferbetweentheseionsl'2'3.Thegreen-emittingphosphorousarecerium-sensitizedterbiummaterials,themostwidelyusedoneisCe,.,,Tb,,,MgAl,,O,,'.However,thealuminiumfamilyrequireshightemperaturesfortheirsynthesis.Investigationswere,therefore,focusedonloweringthepreparativetemperatures.Thephosphatefamily,forexample,(La,Ce,Tb)PO"",needsalowerprepara…     

Photo-aquation of cis-[RuCl2(mPTA)4](CF3SO3)4 in water (mPTA = N-methyl-1,3,5-triaza-7-phosphaadamantane)

On irradiating the complex cis-[RuCl(2)(mPTA)(4)](CF(3)SO(3))(4) (2) with near UV light at room temperature, (OC-6-13)-[RuCl(2)(mPTA)(3)(H(2)O)](CF(3)SO(3))(3) (3) was obtained. Complex 3 is the product of the substitution in 2 of one mPTA by a H(2)O molecule and the rearrangement from cis to trans of the two chlorides. The selective photo-reaction of 2 is produced with radiation of 300 < λ < 400 nm or with λ = 367 nm in 50 min (Φ(367 nm) (D(2)O) = 0.18 ± 0.01). The reaction is not reversible with visible light. The transformation of 2 into 3 is not dependent on the pH but only on the radiation used. Reaction of 3 with NaCl leads to (OC-6-21)-[RuCl(3)(mPTA)(3)](CF(3)SO(3))(2) (4) which could be directly obtained by irradiation of 2 with λ = 367 nm in water and 5 eq. of NaCl (Φ(367 nm) (D(2)O) = 0.17 ± 0.01). Complex 4 turns slowly to 2 in water with 1 eq. of mPTA under light of λ > 416 nm. Complete conversion of 4 into 2 was achieved after more than one day. All complexes were characterized by elemental analysis, IR and NMR spectroscopy, and 2, 3 and 4 by single crystal X-ray determination. An easy synthesis for the ligand mPTA(CF(3)SO(3)) is also reported.     

Reactions of diborane with ammonia and ammonia borane: catalytic effects for multiple pathways for hydrogen release

High-level electronic structure calculations have been used to construct portions of the potential energy surfaces related to the reaction of diborane with ammonia and ammonia borane (B2H6 + NH3 and B2H6 + BH3NH3)to probe the molecular mechanism of H2 release. Geometries of stationary points were optimized at the MP2/aug-cc-pVTZ level. Total energies were computed at the coupled-cluster CCSD(T) theory level with the correlation-consistent basis sets. The results show a wide range of reaction pathways for H2 elimination. The initial interaction of B2H6 + NH3 leads to a weak preassociation complex, from which a B-H-B bridge bond is broken giving rise to a more stable H3BHBH2NH3 adduct. This intermediate, which is also formed from BH3NH3 + BH3, is connected with at least six transition states for H2 release with energies 18-93 kal/mol above the separated reactants. The lowest-lying transition state is a six-member cycle, in which BH3exerts a bifunctional catalytic effect accelerating H2 generation within a B-H-H-N framework. Diborane also induces a catalytic effect for H2 elimination from BH3NH3 via a three-step pathway with cyclic transition states. Following conformational changes, the rate-determining transition state for H2 release is approximately 27 kcal/mol above the B2H6 + BH3NH3 reactants, as compared with an energy barrier of approximately 37 kcal/mol for H2 release from BH3NH3. The behavior of two separated BH3 molecules is more complex and involves multiple reaction pathways. Channels from diborane or borane initially converge to a complex comprising the H3BHBH2NH3adduct plus BH3. The interaction of free BH3 with the BH3 moiety of BH3NH3 via a six-member transition state with diborane type of bonding leads to a lower-energy transition state. The corresponding energy barrier is approximately 8 kcal/mol, relative to the reference point H3BHBH2NH3 adduct + BH3. These transition states are 27-36 kcal/mol above BH3NH3 + B2H6, but 1-9 kcal/mol below the separated reactants BH3NH3 + 2 BH3. Upon chemical activation of B2H6 by forming 2 BH3, there should be sufficient internal energy to undergo spontaneous H2 release. Proceeding in the opposite direction, the H2 regeneration of the products of the B2H6 + BH3NH3reaction should be a feasible process under mild thermal conditions.     

Theoretical studies of molybdenum peroxo complexes [MoOn(O2)3-n(OPH3)] as catalysts for olefin epoxidation

The equilibrium geometries of the molybdenum oxo/peroxo compounds MoOn(O2)3-n and the related complexes [MoOn(O2)3-n(OPH3)] and [MoOn(O2)3-n(OPH3)(H2O)] (n = 0-3) have been calculated using gradient-corrected density-functional theory at the B3LYP level. The structures of the peroxo complexes with ethylene ligands [MoOn(O2)3-n(C2H4)] and [MoOn(O2)3-n(OPH3)(C2H4)] (n = 1, 2) where ethylene is directly bonded to the metal have also been optimized. Calculations of the metal-ligand bond-dissociation energies show that the OPH3 ligand in [MoOn(O2)3-n(OPH3)] is much more strongly bound than the ethylene ligand in [MoOn(O2)3-n(C2H4)]. This makes the substitution of phosphane oxide by olefins in the epoxidation reaction unlikely. An energy-minimum structure is found for [MoO(O2)2(OPH3)(C2H4)], for which the dissociation of C2H4 is exothermic with D0 = -5.2 kcal/mol. The reaction energies for the perhydrolysis of the oxo complexes with H2O2 and the epoxidation of ethylene by the peroxo complexes have also been calculated. The peculiar stability of the diperoxo complex [MoO(O2)2(OPH3)(H2O)] can be explained with the reaction energies for the perhydrolysis of [MoOn(O2)3-n(OPH3)(H2O)]. The first perhydrolysis step yielding the monoperoxo complex is less exothermic than the second perhydrolysis reaction, but the further reaction with H2O2 yielding the unknown triperoxo complex is clearly endothermic. CDA analysis of the metal-ethylene bond shows that the binding interactions are mainly caused by charge donation from the ligand to the metal.     

Magnetic and electronic properties of CaCu3Cr4O12 and CaCu3Cr2Sb2O12 by first-principles density functional calculation

The electronic and magnetic properties of CaCu3Cr4O12 and CaCu3Cr2Sb2O12 are investigated by the use of the full-potential linearized augumented plane wave (FPLAPW) method. The calculated results indicate that CaCu3Cr4O12 is a ferrimagnetic and half-metallic compound, in good agreement with previous theoretical studies. CaCu3Cr2Sb2O12 is a ferrimagnetic semiconductor with a small gap of 0.136 eV. In both compounds, because Cr4+ 3d (d2) and Cr3+ 3d (d3) orbitals are less than half filled, the coupling between Cr-Cu is antiferromagnetic, whereas that between Cu-Cu and Cr-Cr is ferromagnetic. The total net spin moment is 5.0 and 3.0 microB for CaCu3Cr4O12 and CaCu3Cr2Sb2O12, respectively. In CaCu3Cr4O12, the 3d electrons of Cr4+ are delocalized, which strengthens the Cr-Cr ferromagnetic coupling. For CaCu3Cr2Sb2O12, the doping of nonmagnetic ion Sb5+ reduces the Cr-Cr ferromagnetic coupling, and the half-filled Cr3+ t2g (t2g3) makes the chromium 3d electrons localized. In addition, the ordering arrangement of the octahedral chromium and antimony ions also prevents the delocalization of electrons. Hence, CaCu3Cr2Sb2O12 shows insulating behavior, in agreement with the experimental observation.     

Binding of pi-acceptor ligands to (triamine)iron(II) complexes

A series of (Me3TACN)FeII derivatives with soft coligands have been investigated, where Me3TACN is N,N',N"-trimethyl-1,4,7-triazacyclononane. Treatment of Me3TACN with FeCl2 afforded a compound with the empirical formula (Me3TACN)FeCl2 (1). Compound 1, which is a versatile precursor reagent, was shown by single-crystal X-ray diffraction to be the salt [(Me3TACN)2Fe2Cl3][(Me3TACN)FeCl3], containing isolated [(Me3TACN)2Fe2Cl3]+ and [(Me3TACN)FeCl3]- subunits. Treatment of 1 with NaBPh4 gave the known [(Me3TACN)2Fe2Cl3]BPh4, while the addition of Me3TACN to FeCl4(2-) gave [(Me3TACN)FeCl3]-. Oxygenation of 1 afforded [(Me3TACN)FeCl2]2(mu-O), which was shown crystallographically to be centrosymmetric with a pair of distorted octahedral Fe centers. The Fe-N bond trans to the Fe-O bond is elongated by 02 A relative to the other Fe-N distances. Solutions of 1 and thiolates absorb CO to give [(Me3TACN)Fe(SPh)(CO)2]BPh4 and (Me3TACN)Fe(S2C2H4)(CO) (nu CO = 1896 cm-1). Treatment of 1 with excess CN- afforded [(Me3TACN)Fe(CN)3]-, isolated as its PPh4+ salt 5. Crystallographic and spectroscopic studies show that 5 is low spin with a C3v structure; its Fe-N distances contracted by 023 A relative to those in [(Me3TACN)FeCl3]-. Aqueous solutions of 1 bind CO upon the addition of CN- to produce (Me3TACN)Fe(CN)2(CO) (6) Analogous to 6 is (Me3TACN)Fe(CN)2(CNMe), prepared by methylation of 5. The metastable dicarbonyl [(Me3TACN)FeI(CO)2]I was prepared by treatment of FeI2(CO)4 with Me3TACN and was crystallographically characterized as its BPh4- salt. Values of E1/2 for [(Me3TACN)FeCl3]-, 5, and 6 are -0409, -0640, and 0533 V vs Fc/Fc+, respectively.     

Reactivity of a palladium fluoro complex towards silanes and Bu3SnCH=CH2: Catalytic derivatisation of pentafluoropyridine based on carbon-fluorine bond activation reactions

The chloro and azido complexes trans-[PdCl(4-C5NF4)(PiPr3)2] (3) and trans-[Pd(N3)(4-C5NF4)(PiPr3)2] (4) can be prepared by reaction of [PdF(4-C5NF4)(PiPr3)2] (2) with Et3SiCl or MeSiN3, respectively. In contrast, reactions of 2 with Ph3SiH or Me2FSiSiFMe2 give the products of reductive elimination 2,3,5,6-tetrafluoropyridine (5) or 4-(fluorodimethylsilyl)tetrafluoropyridine (6) as well as [Pd(PiPr3)2] (1). In a catalytic experiment, pentafluoropyridine can be converted with Ph3SiH into 5 in 62% yield, when 10% of 2 is employed as catalyst. Treatment of trans-[PdF(4-C5NF4)(PiPr3)2] (2) with Bu3SnCH=CH2 in THF at 50 degrees C results in the formation of [Pd(PiPr3)2] (1) and 4-vinyltetrafluoropyridine (7). Complex 2 is also active as a catalyst towards a Stille cross-coupling reaction of pentafluoropyridine with Bu3SnCH=CH2 to give 4-vinyltetrafluoropyridine (7) with a TON of 6. The molecular structure of the complex 3 has been determined by X-ray crystallography.     

Cation-anion interactions in 1-ethyl-3-methylimidazolium trifluoromethanesulfonate-based ionic liquid electrolytes

An important step in developing ionic-liquid-based electrolytes for lithium rechargeable batteries is obtaining a molecular-level understanding of the ionic interactions that occur in these systems. In this study, 1-ethyl-3-methylimidazolium trifluoromethansulfonate ([C2mim]CF3SO3) is complexed with LiCF3SO3, and the local structures of the CF3SO3- and [C2mim]+ ions are investigated with infrared and Raman spectroscopy. The isolation and subsequent refinement of a Li[C2mim](CF3SO3)2 crystal provides further insight into the structure of the [C2mim]CF3SO3-LiCF3SO3 solutions. Minor changes are observed in the infrared and Raman spectra of dilute [C2mim]CF3SO3-LiCF3SO3 solutions compared to pure [C2mim]CF3SO3. However, a suspension of very small Li[C2mim](CF3SO3)2 crystallites forms at a solution composition of [C2mim]CF3SO3:LiCF3SO3 = 10:1 (mole ratio), placing an upper limit on the solubility of LiCF3SO3. Essentially no changes are observed in the vibrational modes of the [C2mim]+ cations over the entire range of LiCF3SO3 compositions studied, suggesting that the addition of these compounds does not significantly perturb the local structure of the [C2mim]+ cations. The salt used in this study has a common anion with the ionic liquid; thus, the ion cloud surrounding the [C2mim]+ ions, which must be primarily composed of CF3SO3- anions, is not significantly altered with the addition of LiCF3SO3.     

pH-dependent H2-activation cycle coupled to reduction of nitrate ion by CpIr complexes.

This paper reports a pH-dependent H2-activation [H2 (pH 1-4) --> H+ + H- (pH -1) --> 2H+ + 2e-] promoted by CpIr complexes [Cp = eta5-C5(CH3)5]. In a pH range of about 1-4, an aqueous HNO3 solution of [CpIr(III)(H2O)3]2+ (1) reacts with 3 equiv of H2 to yield a solution of [(CpIr(III))2(mu-H)3]+ (2) as a result of heterolytic H2-activation [2[1] + 3H2 (pH 1-4) --> [2] + 3H+ + 6H2O]. The hydrido ligands of 2 display protonic behavior and undergo H/D exchange with D+: [M-(H)3-M]+ + 3D+ <==>[M-(D)3-M]+ + 3H+ (where M = CpIr). Complex 2 is insoluble in a pH range of about -0.2 (1.6 M HNO3/H2O) to -0.8 (6.3 M HNO3/H2O). At pH -1 (10 M HNO3/H2O), a powder of 2 drastically reacts with HNO3 to give a solution of [CpIr(III)(NO3)2] (3) with evolution of H2, NO, and NO2 gases. D-labeling experiments show that the evolved H2 is derived from the hydrido ligands of 2. These results suggest that oxidation of the hydrido ligands of 2 [[2] + 4NO3- (pH -1) --> 2[3] + H2 + H+ + 4e-] couples to reduction of NO3- (NO3- --> NO2- --> NO). To complete the reaction cycle, complex 3 is transformed into 1 by increasing the pH of the solution from -1 to 1. Therefore, we are able to repeat the reaction cycle using 1, H2, and a pH gradient between 1 and -1. A conceivable mechanism for the H2-activation cycle with reduction of NO3- is proposed.     

Elusive trimethyllanthanum: snapshots of extensive methyl group degradation in la--Al heterobimetallic complexes

Reactions of [La(AlMe4)3] and [Y(AlMe4)3] with PMe3 show that the phosphine can cleave Ln--CH3--Al linkages, separating Me3Al(PMe3). PMe3 (3 mol equiv) reacts with [Y(AlMe4)3] to give [(YMe3)n] contaminated with by-products containing phosphorus and aluminum. The La-based analog, [(LaMe3)n], is not formed selectively from the reaction of [La(AlMe4)3] with PMe3 or Et2O, which rather yields insoluble La/Al heterobimetallic products. Three multi-nuclear La-based clusters were obtained from a reaction of [La(AlMe4)3] with PMe3 (1 equiv) and identified by X-ray structure analyses. Each cluster exhibits extensive methyl group degradation and contains methylene, methine, or carbide moieties. [La4Al8(CH)4(CH2)2(CH3)20(PMe3)] has a [La4(CH)4] cuboid core supported by AlMe3, Me2AlCH2AlMe2, and PMe3 ligands. [La4Al8(C)(CH)2(CH2)2(CH3)22(toluene)] also contains a cuboid core, [La3Al(C)(CH)2(CH2)], which includes one exo cubic lanthanum atom, and is supported by AlMe3, Me3AlCH2AlMe2, (AlMe4)-, and toluene ligands. The lanthanum atoms in [La5Al9(CH)6(CH3)30] are arranged in a trigonal bipyramidal fashion with (CH) functionalities capping each face. The [La5(CH)6]3- core is formally balanced by three AlMe2 + moieties and is additionally supported by six AlMe3 ligands. The unit cell contains two independent La5 clusters, one with pseudo-C3h and the other with pseudo-D3 symmetry, as well as two molecules of the separation co-product Me3Al(PMe3).     

助剂形态对Pt/γ-A12O3催化剂抗积炭性能的影响

采用CO和H2脉冲吸附、程序升温还原、NH3程序升温脱附及X射线衍射等手段对各金属氧化物改性的Pt/Al2O3催化剂进行了表征,研究了助剂形态对Pt/Al2O3催化剂在非临氢条件下催化环己烷脱氢反应性能的影响.结果表明,催化剂稳定性从高到低依次为Zr-Pt/Al2O3＞ Ca-Pt/Al2O3＞ Ce-Pt/Al2O3...     

La2O3/MgO催化剂上的甲烷氧化偶联

研究了甲烷在La_2O_3/MgO催化剂上的氧化偶联。发现制备过等对催化剂的行为有显著影响。比较了催化剂的反应性能和体相结构,表明在MgO上存在着三种La_2O_3的状态:高分散La_2O_3是最活泼的;La(OH)_3不太活泼;而呈六方晶相的La_2O_3晶粒活性最低。在催化剂中加入Na_2CO_3和K_2CO_3可以改进催化剂的活性和选择性。还考察了反应条件如温度和空速的影响。     

Theoretical Investigation of CH3CF2O2+HOO Reaction

The reactions of CH3CF2O2 with HOO are important chemical cyclic processes of photochemical contamination. In this paper, the reaction pathways and reaction mechanism of CH3CF2O2+HOO are investigated extensively with the Gaussian 98 package at the B3LYP/6-311++G** basis sets. The use of vibrational mode analysis and electron population analysis to reveal the reaction mechanism is firstly reported. The study shows that CH3CF2CO2+HOO→IM1→TS1→CH3CF2O2H+O2 channel is the energetically most favorable, CH3CF2CO2H and O2 are the principal products, and the formation of CH3OH and CF2O is also possible.