Determination of microgram quantities of gadolinium by cathode-ray polarography

A cathode-ray polarographic method has been developed for the determination of microgram quantities of gadolinium with the use of an azo-dye, Solochrome Violet RS. Disadvantages in the use of 0sd1M potassium chloride, commonly recommended as electrolyte for the polarographic determination of rare earths, have been demonstrated. The influence of pH, temperature, ligand concentration and purity, and the stability of the complex, have been investigated for the optimum performance of the method. The linear range is 0.5-12 mug/ml of gadolinium. Interferences by some lanthanides and other cations have been examined.     

Application of differential pulse polarography for trace determination of polycytidylic acid in absence and presence of some metal ions

Summary A differential pulse polarographic method has been applied to the determination of trace concentrations of polycytidylic acid (Poly-C) in absence and presence of metal ions. The applicability of differential pulse polarography for the trace determination of the investigated biological compound was examined with regard to the dependence of differential pulse current on various parameters such as pH, pulse amplitude, scan rate and drop time. The selectivity of this technique for the determination of binary and a ternary mixtures of poly-C and some metal ions has been also reported. Limits of detection and quantitation have been calculated for the differential pulse polarographic determination of the poly-C and various metal ions. The validity of this method is supported by the constancy of the i_p/C values and a statistical analysis is included on calibration curve parameters and observed concentration.     

Differential pulse polarographic determination of molybdenum after separation by 8-hydroxyquinoline extraction into dichloromethane

A polarographic investigation of several metal 8-hydroxyquinolinates in dichloromethane medium following solvent extraction has been made. From the data obtained, a selective, specific and sensitive method for the determination of molybdenum at ng ml levels has been developed involving direct differential pulse polarographic measurement on the dichloromethane extract. In this work, EDTA is used as an effective masking agent to separate molybdenum from other metals. The proposed method has been applied to the determination of molybdenum in a variety of steels and NBS-SRM 1577 bovine liver with good accuracy and precision.     

Study on Polarographic Absorption Wave of Soluble Porphyrin Copper Complex

The porphyrins is a kind of sensitive color-producing reagent. However, its selectivity is low. If the porphyrin is used in polarographic analysis, the selectivity and sensitivity can be improved. Copper is one of the most important trace element in human and mammalian body. The polarographic method is a kind of important method in determination of metal ion [1]. In this paper, meso-tetra (4-sulfonylphenyl) porphyrin (H2TPPS4) is used as the soluble ligand. The polarographic absorption behavior of meso-tetra (4-sulfonylphenyl) porphyrin complex with copper ion has been studied.     

The polarographic determination of indium in zinc-base alloys : The determination of indium in zinc and in zinc alloys of low aluminium content

Studies of the application of an 8-hydroxyquinoline extraction and of a zinc oxide “collection” procedure for the separation of trace amounts of indium from zinc alloys are described and discussed. A combination of radio-chemical and polarographic determination were employed for this work. A polarographic method for the determination of indium in zinc and in zinc alloys of low aluminium content is presented     

Polarographic determination of methyl methacrylate

The permanganate oxidation of methyl methacrylate in weakly acidic solution yields methyl pyruvate. Hydroxylamine hydrochloride is used for destroying the excess of permanganate. At the same time it is consumed for oximation of the pyruvate, and the resulting oxime is determined polarographically. The reaction scheme of permanganate oxidation of methyl methacrylate is suggested and optimum working conditions are found both for permanganate oxidation and for polarographic determination. The method is used for the determination of vapours of methyl methacrylate in the air, for industrial hygiene purposes.     

The polarographic determination of manganese,copper, chromium and iron in the insoluble residue remaining after the solution of calcium metal in hydro

The development of a method for the polarographic determination of manganese, copper, chromium and iron in the insoluble residue remaining after the dissolution of calcium metal is described. The base electrolyte used is sodium hydroxide and maiinitol. The probable electrode reactions of the manganese and copper reductions in this medium are suggested.     

Electrochemical determination of trace amounts of environmentally important dyes

A number of dyes exhibit genotoxic or ecotoxic properties leading to the need for sensitive and selective methods for their determination. Because of the easy reducibility of dyes, modern polarographic and voltammetric methods (differential pulse polarography on classical dropping mercury electrode, differential pulse voltammetry on hanging mercury drop electrode or adsorptive stripping voltammetry) are suitable for the determination of trace amounts of these substances in the general environment in the vicinity of production plants. The scope and limitations of these methods is reviewed and optimum conditions for recently developed methods are summarized. It is shown that the sensitivity of newly developed polarographic and voltammetric methods is sufficient even for the most demanding applications and their selectivity can be increased by their combination with preliminary separation using thin layer chromatography or liquid extraction.     

Polarographic determination of mitoxantrone in pharmaceutical preparations and biological media

An A.c. tast polarographic method for the determination of mitoxantrone in pharmaceutical preparations and biological media is described. The optimum pH for the extraction of the drug from various samples into a 4:1 mixture of chloroform-isopropanol is indicated. The effect of other parameters such as temperature, composition of supporting electrolyte and polarographic variables (drop time, a.c. voltage amplitude, voltage sweep rate) on the sensitivity and reproducibility of the method is also verified, and a simple and precise recommended method is proposed for the determination of mitoxantrone. The method is found to be applicable to the analysis of the drug in extracted phases at concentrations 5 x 10(-7) - 2.5 x 10(-5) M with a precision of about 1.5% (relative standard deviation). The limit of detection is calculated as 3.5 x 10(-7) M for both aqueous pharmaceutical preparations and biological media.     

Electrochemical determination of trace amounts of environmentally important dyes

A number of dyes exhibit genotoxic or ecotoxic properties leading to the need for sensitive and selective methods for their determination. Because of the easy reducibility of dyes, modern polarographic and voltammetric methods (differential pulse polarography on classical dropping mercury electrode, differential pulse voltammetry on hanging mercury drop electrode or adsorptive stripping voltammetry) are suitable for the determination of trace amounts of these substances in the general environment in the vicinity of production plants. The scope and limitations of these methods is reviewed and optimum conditions for recently developed methods are summarized. It is shown that the sensitivity of newly developed polarographic and voltammetric methods is sufficient even for the most demanding applications and their selectivity can be increased by their combination with preliminary separation using thin layer chromatography or liquid extraction.     

The polarographic behaviour of some elements in concentrated calcium chloride solution : The development of a method for the determination of metallic impurities in calcium metal

The results of investigations discussed in this and previous papers are employed to develop a polarographic method for the determination of copper, chromium, lead, cadmium and manganese in calcium metal. Full details of the method are given and results and conclusions are presented.     

Simultaneous determination of N-unsubstituted and N-substituted nitroazoles and criteria for their identification-III Chromatographic separation and polarographic determination of halo-nitroimidazoles

Methods for identifying and determining halo-nitroimidazoles appearing together during synthetic processes, regardless of the preparation methods, are proposed. Polarographic determination can be used in all synthetic processes when halo-nitroimidazoles have been obtained by nitration of the halo-imidazoles. When the halo-nitroimidazoles have been obtained from 5(4)-halo-4(5)-nitroimidazoles by substitution of the imino hydrogen atom, and when only one N-substituted derivative has been obtained in a reaction mixture, simultaneous polarographic determination of both compounds is possible, but only when an alkaline medium is used as supporting electrolyte. In some cases, simultaneous polarographic determination of all three compounds present in a reaction mixture during N-substitution processes [one 5(4)-halo-4(5)-nitroimidazole and two N-substituted isomers] is also possible with alkaline supporting electrolyte. Explanations are given of the phenomena on which the simultaneous polarographic determination is based. When simultaneous polarographic determination cannot be used to determine the amount of each polarographically-active compound present in a reaction mixture, the compounds can be separated chromatographically and then determined individually by polarography.     

Differential pulse polarographic determination of the herbicides atrazine, prometrine and simazine

A differential pulse polarographic method, using the dropping mercury electrode for the determination of the herbicides atrazine, prometrine and simazine is described. The optimum pH is 2. The limit of detection is 8 x 10(-8)M, corresponding to about 15 mu/l. The electrochemical behaviour of the compounds on glassy-carbon and mercury-coated glassy-carbon electrodes was also examined with a view to its use for electrochemical detection of the herbicides after their separation by HPLC.     

Sine-wave polarographic determination of zirconium or niobium in aqueous media

The sine-wave polarographic determination of zirconium in aqueous media was investigated using solutions which were 0.55 – 5.5·10^-3M in zirconyl chloride and 1 M in potassium chloride and had been adjusted to pH 2.0 with hydrochloric acid. It was possible to determine zirconium in the concentration range of 0.05 to 0.4 mg per ml. The sine-wave polarographic behavior of zirconium in aqueous solutions in the pH range 2–3 is discussed. The sine-wave polarographic determination of niobium in aqueous media was investigated using concentrated sulfuric acid containing 5 to 0.1 mg of niobium per ml in a supporting electrolyte of citric acid; the determination of niobium was possible down to 0.1 mg of niobium per ml of concentrated sulfuric acid although the D.C. polarographic method was impractical for the determination of less than 0.5 mg of niobium per ml.     

Polarographic determination of nitrate in vegetables

A polarographic method for the determination of nitrate in vegetables is presented. The method is based on the reduction of nitrate to nitric oxide which reacts in solution with colbalt (II) and thiocyanate ions forming an electroactive complex that is reduced at the dropping mercury electrode at -0.5 V (vs. SCE). The nitric oxide is generated outside the polarographic cell by addition of ferrous ammonium sulfate and ammonium molybdate in hydrochloric acid to the previously triturated vegetable matrices. The calibration graph was linear in the range of 2-12x10(-6) mol nitrate. The recovery of nitrate in vegetable matrices (broccoli, kale, lettuce, radish, red beet, spinach, turnip and watercress) varied from 85.4 to 107.4 % and the nitrate content, expressed as sodium nitrate, varied from 751 to 10 806 mg kg(-1) of fresh vegetable. The relative standard deviation for the proposed method is lower than 7% and considering a sample of 5.0 g, the determination limit was 39 mg of nitrate per kg fresh vegetable weight. The precision and accuracy of the polarographic method were comparable to those of the reference spectrophotometric method (official AOAC reference method for the determination of nitrate in foodstuffs).     

Application of the spectral correction method and "neural networks" for simultaneous determination of V(V) and Al(III)

Simultaneous determination of V(V) and Al(III) was performed by application of neural networks when the calibration matrix was performed using β-correction spectra. Two reactions between V(V) and Al(III) and Alizarin Red S (ARS) as a ligand have been investigated and applied for the simultaneous spectrophotometric determination of these metal ions. The parameters controlling behavior of the system were investigated and optimum conditions selected. Feed-forward neural networks have been trained to quantify considered metal ions in mixtures under optimum conditions. Sigmoidal functions were used in the hidden and output layers. Determinations were made over the concentration range 0.10-7.80 μg ml⁻¹ of V(V) and 0.11-4.20 μg ml⁻¹ of Al(III). Applying this method satisfactorily to simultaneous determination of these metal ions in several synthetic solutions with total relative standard error less than 4.02% validated the proposed method.     

Solution Equilibria. A Unified Mathematical Treatment of Experimental Polarographic and Potentiometric Data from Acid?Base and Ligand Titrations. A Polarographic and Ion Selective Electrode Study of CdII?(N‐(2‐hydroxyethyl)iminodiacetic acid)?OH System

It has been demonstrated that potentiometric and polarographic data coming from either acid? base or ligand titrations can be evaluated by the same set of equations and mathematical procedures involving mass‐balance equations written for any metal? ligand model, including polynuclear species. It is shown that the concept of the complex formation curves, used previously in modeling and refinement of stability constants in acid‐base titration, is of general nature and can be successfully used in polarographic and potentiometric experiments conducted as a function of pH or an excess of a ligand. It appears that the linear relationship ΔE vs. log [M], typical for potentiometric studies with ISE, holds also in the case of the study of kinetically mixed metal‐ligand system studied by polarography when the corrected shift in the polarographic signal is used. The relationship ΔE vs. log [M] applies equally to the acid‐base and ligand titration for both experimental techniques employed (potentiometry and polarography). The significance of the corrected shift is discussed and its meaning in the study of kinetically fast or slow metal? ligand systems is elaborated. Advantages of the acid‐base titration over the ligand titration are discussed. The generalized mathematical data treatment was successfully employed in the study of the Cd^II? (N‐(2‐hydroxyethyl)iminodiacetic acid) system. Results obtained from both analytical techniques (potentiometry with the use of an ion selective electrode, and two polarographic techniques) and analytical procedures (acid? base and ligand titrations) compare well with each other and with the literature data (the formation and stability constants of ML and ML₂). In addition, a new complex M(HL) was identified and its stability constant is reported.     

Polarographic indication of the end-point in chelometric titrations with triethylenetetraminehexa-acetic acid

The application of d.c. and square-wave polarographic measurements for the indication of the end-point in titrations with triethylenetetraminehexa-acetic acid (TTHA) has been studied. TTHA has ten co-ordinating groups and forms complexes with metal to ligand ratios of either 1:1 or 2:1, depending on the metal and experimental conditions. The shape of the titration curves, determined by the dependence of the limiting current (peak current of the square-wave polarographic curve) or of the half-wave potential (peak potential) on the amount of TTHA added indicates the composition of the complex formed in the titration. The composition of this complex as determined from the studied titration curves agrees with that predicted by theory. Titrations with polarographic indication of the end-point were also applied for direct titrations of binary mixtures of metal ions. The resulting titration curves indicated the existence of mixed dinuclear complexes and also the kinetic factors involved in the reactions between two different metal ions and TTHA.     

Differential-pulse polarographic determination of the insecticide imidacloprid in commercial formulations

The reduction reaction of imidacloprid [1-(6-chloro-3-pyridylmethyl)-N-nitroimidazolidin-2-ylideneamine] at a mercury electrode shows two well-defined waves in the range of pH 2.0–11.0. The characteristics of the electrode processes were examined. The analyte captures four electrons in the first step and two in the second to give the hydroxylamine and amine derivatives, respectively. A differential-pulse polarographic method for the determination of imidacloprid based on the first reduction peak of this compound is presented. Britton-Robinson buffer was used as a supporting electrolyte and optimum pH value was found to be pH 8.O. The applicable concentration range was from 10 to 200 ng/ml, with a relative standard deviation of 1.5% (for a level of 80 ng/ml) and a detection limit of 3 ng/ml. The method has been satisfactorily applied to the determination of imidacloprid in commercial formulations.