Extraction of uranium(VI) and thorium(IV) from nitric acid solution by N-alkylcaprolactam

Extraction of uranium(VI), thorium(IV) from nitric acid has been studied with N-octylcaprolactam and N-(2-ethyl)hexylcaprolactam. Distribution coefficients of U(VI), Th(IV) and HNO₃ as a function of aqueous NHO₃ concentration, extractant concentration and temperature have been studied. The compositions of extracted species, thermodynamic parameters of extraction have been evaluated. Third phase formation in extraction of U(VI) has been studied. Back extraction behavior of U(VI) and Th(IV) from the organic phase has also been tested. The results obtained are compared with those obtained by using TBP under the same experimental conditions.     

Extraction of copper(II) and nickel(II) by nopinoquinone dioxime

In the research for a selective extractant for nickel a strained dioxime, β-nopinoquinone dioxime, has been studied in its extraction properties for copper(II) and nickel(II). Spectroscopic investigations (ESR and NMR) showed that both copper and nickel are extracted as a N,N-coordinated chelate. The extraction studies showed that the use of strained instead of aliphatic dioximes makes the extraction more convenient because of the higher extraction rate, but the selectivity for nickel above copper disappears.δ-nopinoquinone dioxime is easily converted into its furazan by treatment with 1N NaOH. This furazan is a rather weak ligand without significant extraction capacities.     

Potentiometric studies on aqueous fluoride complexes of actinides: Stability constants of Th(IV)-, U(IV)-, Np(IV)- and Pu(IV)-fluorides

The extraction behaviour of Th(IV) and U(VI) in extraction chromatography has been investigated on the basis of partition and infrared studies. The stationary phase was purified undiluted TBP supported on Amberlite XAD-4 and the mobile phase was nitric acid. The results have shown that the equilibria for the extraction of Th(IV) and U(VI) by the TBP/XAD-4 resin agreed very closely with those in solvent extraction.     

The separation of zinc(II) and cadmium(II) by liquid-liquid extraction

The extraction of Zn(II) and Cd(II) from thiocyanate solutions with bis-2-ethylhexyl sulphoxide (B₂EHSO) in benzene as an extractant has been studied by tracer techniques. For comparison, extraction has also been carried out with tributylphosphate (TBP). The extraction data have been analysed by both graphical and theoretical methods by taking into account complexation of the metal in the aqueous phase by inorganic ligands and plausible complexes extracted into the organic phase. The results demonstrate that Zn(II) is extracted as Zn(SCN)₂·2B2EHSO and Zn(SCN)₂·2TBP. In the case of Cd(II), the extracted species are Cd(SCN)₂·4B2EHSO/4TBP. The synergistic extraction of Zn(II) and Cd(II) with mixtures of 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5 (HPMBP) and B2EHSO or TBP or trioctylphosphine oxide (TOPO) from acetate buffer solutions has also been investigated. Zn(II) is extracted as Zn(PMBP)₂·B2EHSO/TBP/TOPO. On the other hand, Cd(II) is found to be not extracted with these mixed-ligand systems under the experimental conditions. These results also demonstrate the mutual separation of Zn(II) and Cd(II) using the synergistic extraction with HPMBP in the presence of various neutral oxodonors.     

Mercury(II) and silver(I) receptors based on tetrathiacalix[4]arene hydrazones

The extraction ability of phenyl hydrazone derivatives of cone- and 1,3-alternate tetrathiacalix[4]arenes towards to some alkali, alkaline earth, transition and heavy metal ions has been investigated by picrate extraction method. The synthesized cone-tetrathiacalix[4]arene hydrazones show a high efficiency coupled with an excellent selectivity towards for Ag⁺ and Hg²⁺ ions. The stoichiometry of complexes and the extraction constants have been determined. The influence of calix[4]arene platform’s structure and the electron donor substituents in phenyl fragments on the extraction efficiency has been discussed.     

Extraction of uranium(VI) with bis(octylsulfinyl)methane

The liquid-liquid extraction of uranium(VI) from aqueous nitric acid with bis(octylsulfinyl)methane (BOSM) has been studied over a wide range of conditions. The extracted species appear to be UO₂(NO₃)₂·2BOSM. It was found that the extraction increased with increasing nitric acid concentration up to 8.5 mol/l and then descreased. Extraction also increased with increasing extractant concentration. The influence of temperature and salting-out agent concentration on the extraction equilibrium has also been investigated, and the enthalpy of the extraction reaction was estimated.     

Re(VII) extraction and separation from Mo(VI) by levextrel resins containing trialkyl amine

A synthetic method of novel trialkyl amine (N235, R₃N, R = C₈–C₁₀) Levextrel resin was described in this paper. The extraction behavior of rhenium(VII) and molybdenum(VI) with this N235 Levextrel resin has been studied. The mechanism of extraction of Re(VII) with the N235 Levextrel resin has been discussed briefly through equi-molar series method and the conventional slope analysis method. The optimal conditions of extraction and separation Mo(VI) and Re(VII) with the N235 Levextrel resin were determined. Also, its excellent extraction characteristics for Re(VII) were confirmed by extraction and stripping tests in a analog liquid solution containing Mo(VI) and Re(VII).     

Combined protocol for the analysis of polycyclic aromatic hydrocarbons (PAHs) and polychlorobiphenyls (PCBx) from sediments using focussed microwave assisted (FMW) extraction at atmospheric pressure

A microwave-assisted protocol has been developed using focussed microwaves at atmospheric pressure for the extraction of PAHs and PCBs from sediments. It combines extraction and purification assisted by microwaves. This protocol has been applied to the quantification of 12 individual PAHs, 8 individual PCBs and 8 PCB coeluted mixtures from two Standard Reference Materials and one natural sediment. The results for both classes of compounds (PAHs and PCBs) are good in terms of recoveries, which are always greater than 70% and in most cases around 100%. The reproducibility is also good with coefficients of variation below 10% in most cases. This protocol has the great advantage of saving time, the time dedicated to the preparation / extraction assisted by microwaves being reduced to less than half an hour.     

Combined protocol for the analysis of polycyclic aromatic hydrocarbons (PAHs) and polychlorobiphenyls (PCBs) from sediments using focussed microwave assisted (FMW) extraction at atmospheric pressure

A microwave-assisted protocol has been developed using focussed microwaves at atmospheric pressure for the extraction of PAHs and PCBs from sediments. It combines extraction and purification assisted by microwaves. This protocol has been applied to the quantification of 12 individual PAHs, 8 individual PCBs and 8 PCB coeluted mixtures from two Standard Reference Materials and one natural sediment. The results for both classes of compounds (PAHs and PCBs) are good in terms of recoveries, which are always greater than 70% and in most cases around 100%. The reproducibility is also good with coefficients of variation below 10% in most cases. This protocol has the great advantage of saving time, the time dedicated to the preparation / extraction assisted by microwaves being reduced to less than half an hour.     

Determination of the thalidomide analogues 2-(2,6-dioxopiperidine-3-yl)phthalimidine (EM 12), 2-(2,6-dioxopiperidine-4-yl)phthalimidine (EM 16) and their metabolites in biological samples

A rapid and sensitive method for quantitative analysis of the thalidomide analogues EM 12 and EM 16 and their metabolites has been developed. Following an optional extraction, samples were analysed by reversed-phase high-performance liquid chromatography with ion depression. The recovery of the extraction procedures was 65-80%. The method has been applied to pharmacokinetic studies in small laboratory animals and in vitro model experiments.     

Solvent extraction of W(VI) with rhodamine-B in nitrobenzene

A rapid and selective method has been developed for the extraction of W(VI) with rhodamine-B in nitrobenzene. The extraction coefficient value for the extraction between aqueous solution and nitrobenzene showed a maximum value of E=63 at a pH of 5.0. The stoichiometry of metal to reagent has been determined by the method of substoichiometric extraction and slope ratio method.     

Study on the synergic extraction of uranium(VI) with petroleum sulfoxides (PSO) and tri-n-butyl phosphate (TBP) mixture

The synergic extraction of uranium(VI) from nitric acid solution with petroleum sulfoxides (PSO) and tri-n-butyl phosphate (TBP) mixture has been studied. It has been found that maximum synergic extraction effect occurs if the molar ratio of PSO to TBP is two to three. The composition of the complex of synergic extraction is UO₂(NO₃)₂·TBP·PSO. The formation constant of the complex isK _PT=8.19. The effect of extractant concentration, nitric acid concentration, salting-out agent concentration and temperature on the extraction equilibrium of uranium(VI) was also studied.     

Extraction chromatographic study of aluminium(III) and mutual separation of aluminium(III), gallium(III), indium(III) and thallium(III) with N-n-octylaniline

A selective method has been developed for extraction chromatographic studies of aluminium(III) and its separation from several metal ions with a chromatographic column containing N-n-octylaniline (liquid anion exchanger) coated on silanized silica gel as a stationary phase. The aluminium(III) was quantitatively extracted with the 0.065 mol/L N-n-octylaninine from 0.013 to 0.05 mol/L sodium succinate at a flow rate of 1.0 mL/min. The extracted metal ion has been recovered by eluting with 25.0 mL of 0.05 mol/L hydrochloric acid and estimated spectrophotometrically with aurintricarboxylic acid. The effects of the acid concentration, the reagent concentration, the flow rate and the eluting agents have been investigated. The log-log plots of distribution coefficient (KdAl(III)) versus N-n-octylaniline concentrationin 0.005 and 0.007 mol/L sodium succinate gave theslopes 0.5 and 0.7 respectively and showed theprobable composition of theextracted species was 1:1 (metal to amine ratio) and the nature of extracted species is [RR''NH2+ Al succinate2-] org. .The extraction of aluminium(III) was carried out in the presence of various ions to ascertain the tolerance limit of individual ions. Aluminium(III) has been separated from multicomponent mixtures, pharmaceutical samples and synthetic mixtures corresponding to alloys. A scheme for mutual separation of aluminium(III), indium(III), gallium(III) and thallium(III) has been developed by using suitable masking agents. The method is fast, accurate and precise.     

Emulsion membrane extraction of Am(III) and Am(IV) in systems with tertiary and secondary amines

The stability of emulsions, containing tri-n-octylamine and di-n-octylamine salts in the organic phase and nitric acid in the aqueous phase has been studied. Optimal conditions for the extraction of Am(III) and Am(IV) phosphorus tungstate complexes with such emulsions have been determined. Emulsion membrane extraction is shown to be more effective for this purpose than conventional liquid extraction.     

LIX 84 as an extractant for throium(IV), uranium(VI) and molybdenum(VI)

The extraction order of Th(IV), U(VI) and Mo(VI) based on pH_0.5 values is Mo(VI)>U(VI)>Th(IV). Quantitative extraction has been observed for U(VI) by mixture of 10% (v/v) LIX 84 and 0.1M dibenzoylmethane at pH 4.2 and by mixture of 10% LIX 84 and 0.05M HTTA in the pH range 5.5–7.3 and for Mo(VI) by 10% LIX 84 from chloride media at pH 1.5. The order of extraction of Mo(VI) from 1N acid solutions is HCl>H₂SO₄>HNO₃>HClO₄ and extraction decreases very rapidly with increase in the concentration of HCl as compared to that from H₂SO₄, HNO₃ and HClO₄ acid solutions. The diluents C₆H₆, CCl₄ and CHCl₂ are found to be superior ton-butyl alcohol and isoamyl alcohol for extraction of Mo(VI). Influence of concentration of different anions on the extraction of U(VI) and Mo(VI) has been studied. Very little extraction has been observed in case of Th(IV) by LIX 84 or its mixtures with other chelating extractants or neutral donors.     

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-yl-methyl)-pentan-3-ol from hydrochloric acid solutions

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol from 3 M hydrochloric acid solutions (with chloroform as a diluent) has been studied. Optimal extraction conditions have been found. The reagent has been shown to extract efficiently metal ion from solutions containing 3 M hydrochloric acid due to formation of coordination bond between gold(III) and the N4 atom of the triazole ring. The coordination mechanism of gold(III) extraction has been proposed on the basis of the data obtained. Concentration constants of extraction have been calculated, and the thermodynamic parameters of extraction have been determined.     

The separation of berkelium(III) from cerium(III)

Factors affecting the separation of Bk(III) and Ce(III) in liquid-liquid extraction by tertiary and quaternary amines from neutral solutions of Li, Na, NH₄ and K nitrates have been investigated. It has been found that the maximum separation factor is reached in the extraction from NaNO₃ solutions by solutions of methyl-containing alkylammonium nitrates in xylene.     

Solvent extraction of Sb(III) with malachite green into chloroform

A rapid and selective method for the solvent extraction of Sb(III) using malachite green (C. I. Basic green 4) has been described. Effect of different parameters affecting the extraction coefficient value of Sb(III) such as acidity, time of equilibration, KI concentration, solvents, anions, etc. has been studied. For various elements the separation factor has been evaluated. The stoichiometry of the extracted species has been determined by the method of substoichiometric extraction. The decontamination factor for some elements using substoichiometric quantities of the extracting agent has been evaluated. Radiotracers were employed for the extraction studies. The method elaborated has been employed for the quantitative determination of antimony in normal, benign and cancerous tissues of the human brain.     

Synergistic solvent extraction of Eu(III) and Tb(III) with mixtures of various organophosphorus extractants

Synergistic solvent extraction of Eu(III) and Tb(III) from thiocyanate solutions with mixtures of 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (EHPNA) and di-2-ethylhexylphosphoric acid (DEHPA) or tributyl phosphate (TBP) or trioctylphosphine oxide (TOPO) or triphenylphosphine oxide (TPhPO) in benzene has been studied. The mechanism of extraction can be explained by a simple chemically based model presented in this paper. The equilibrium constants of the mixed-ligand species of the various neutral donors have been determined by non-linear regression analysis.     

Extraction Mechanism of Uranium(VI) with Di(1-Methylheptyl)Phosphoric Acid

The extraction of U(VI) from nitric acid solutions with di-(1-methylheptyl) phosphoric acid has been investigated. The dependence on nitric acid concentration, DMHPA concentration and temperature has been considered and the infra-red spectra of extracted species and extractant were recorded. The mechanism of extraction is discussed in the light of the results obtained.