Spectrophotometric determination of trace copper in water samples with thiomichlersketone

A simple and sensitive spectrophotometric method for determination of trace copper in water samples is proposed. In the presence of pH 4.6 HAc-NaAc buffer solution and surfactant polyethylene octyl phenyl ether (OP) medium, copper reacts with thiomichlersketone (TMK) to form a stable 1:4 complex. The complex Cu(II)-TMK-OP shows maximum absorbance at 500 nm with a molar absorptivity value of 5.7x10(4) l mol-1 cm-1. Beer's law is obeyed for copper concentrations in the range of 0-15 microg/25 ml. The average recovery of copper is between 95.8 and 106%. The method has been applied for determination of trace copper in different water samples with satisfactory results.     

Spectrophotometric determination of copper(II) at low mug l(-1) levels using cation-exchange microcolumn in flow-injection

A simple spectrophotometric flow-injection method is reported for the highly sensitive and fast determination of copper(II). The method is based on the formation of coloured Cu(II)-(4-methylpiperidinedithiocarbamate)(2) complex when the copper solutions are introduced into a tertiary reagent stream containing 4-methylpiperidinedithiocarbamate. The coloured complex is then selectively monitored at 435 nm. To increase interactions between copper(II) and colour forming reagent and preconcentrate of copper(II), a microcolumn containing strong cation exchange resins was placed between injection manifold and spectrophotometer. The system required no mixing chamber and allowed a sample throughput >60 sample h(-1). The calibration graph was linear in the range 5-100 mug l(-1). The detection limit was <0.5 mug l(-1) for 20 mul injection volume of copper(II) ion solution. The developed method was applied to environmental, copper processing water, and ore samples.     

Analytical properties of 1-phenyl-1,2-propanedione-2-oxime thiosemicarbazone: simultaneous spectrophotometric determination of copper(II) and nickel(II) in edible oils and seeds

The analytical properties of 1-phenyl-1,2-propanedione-2-oxime thiosemi-carbazone (PPDOT) are described for the first time. The reagent gives colour reactions with copper(II) and nickel(II) in sodium acetate-acetic acid buffer medium. The copper complex shows maximum absorbance at 465 nm while the nickel complex at 395 nm. Therefore, these colour reactions have been advantageously used for the simultaneous spectrophotometric determination of copper(II) and nickel(II) in synthetic mixture and also in edible oils and seeds.     

3,5-二氯水杨醛缩邻苯二胺铜配合物的合成、晶体结构及光谱学性质

合成了3,5-二氯水杨醛缩邻苯二胺铜配合物[Cu(C₂₀H₁₀Cl₄O₂N₂)]·DMF。 通过元素分析、红外光谱、热重测试技术对其进行了表征,同时用X射线单晶衍射确定了其晶体结构;利用紫外-可见光吸收光谱、荧光激发和发射光谱研究了该配合物的光物理性能。 结果表明,该晶体属于单斜晶系,空间群为P2(1)/n,a=0.81316(8) nm,b=1.53101(18) nm,c=1.87819(19) nm,β=92.4530(10)°,Z=4,最终偏差因子R₁=0.0584,ωR₂=0.1482,配合物的中心铜离子与席夫碱的2个O和2个N配位,形成1个五元环和2个六元环,从而构成了1个四配位的平面构型;配合物的热分解温度为384 ℃,具有很好的热稳定性;在DMF溶液体系中,配合物的荧光激发带位于360～480 nm,荧光发射峰在507 nm处,为蓝绿色荧光,最佳激发波长为440 nm,禁带宽度2.59 eV。     

Metallic copper-containing post-column reactor for the detection of thiram and disulfiram in liquid chromatography

A reaction detector has been developed for the selective detection of thiram and disulfiram. The detection is based on the post-column complexation of these analytes on a solid-state reactor packed with finely divided metallic copper to form a coloured copper complex, copper(II) N,N-dimethyldithiocarbamate, with an absorption maximum at 435 nm. The method is combined with a pre-concentration and clean-up step on a pre-column to permit the sub-ppb determination of, e.g., thiram in surface water samples or disulfiram in urine. Separation is achieved by reversed-phase liquid chromatography.     

Spectrophotometric determination of copper in environmental samples by solid-liquid extraction of its 9, 10-phenanthrenequinone monoximate complex into molten naphthalene

A fairly selective and sensitive spectrophotometric method has been developed for determination of copper after extraction of its 9, 10-phenanthrenequinone monoximate complex into molten naphthalene in the pH range of 6.1-8.4. At room temperature, the solid naphthalene containing the metal complex is separated by filtration, dissolved in dimethylformamide (DMF) and the absorbance measured at 470 nm against the reagent blank. Beer's law is obeyed in the concentration range, 0.0-9.6 micrograms of copper in 10ml of DMF. The molar absorptivity and sensitivity are 6.30 X 10(4) 1 mol-1 cm-1 and 0.001 micrograms cm-2, respectively. The interference of various ions has been studied and the method has been applied for the determination of copper in various standard reference materials, beers, wines, human hair and environmental samples.     

Ultraviolet spectrophotometric determination of copper in copper ores by flow-injection analysis

A flow-injection analysis (FIA) method for the ultraviolet spectrophotometric determination of copper in copper ores is described. The ore samples are dissolved in concentrated perchloric acid, the excess acid is neutralized with ammonia solution, and the resulting solution is used for the determination of copper. The UV-FIA system is based on the reaction of copper (II) ions with pyrophosphate and subsequent measurement of the absorbance of the dipyrophosphatocuprate (II) complex at 240 nm. The main factors which control the formation of this complex and the FIA variables influencing the system are discussed. The calibration graph is linear from 2-50 ppm copper. At a sampling rate of about 70 samples h(-1) with 50 mul sample injections, precision was about 1% relative standard deviation. Results obtained compare well with those obtained by atomic absorption spectrometry.     

Extraction-spectrophotometric determination of traces of gold in copper in silver, lead, blister copper, copper concentrate and anode slime with 4,4'-bis(dimethylamino)-thiobenzophenone

A sensitive spectrophotometric method has been developed for the determination of gold in copper, silver, lead, blister copper, copper concentrate and anode slime. Optimal conditions have been established for the extraction and determination of gold. Gold is extracted as its bromo complex with tri-n-octylamine and determined photometrically with 4,4'-bis(dimethylamino)thiobenzophenone; the absorbance of the organic phase is measured at 540 nm and the apparent molar absorptivity is about 1.2 x 10(5) 1.mole(-1). cm(-1). As little as 0.1 or 0.2 ppm of gold in these materials can be determined.     

Novel UV assay for protein determination and the characterization of copper-protein complexes by mass spectrometry

A very simple, highly selective and sensitive assay of proteins based on the biuret absorption in the ultraviolet region has been developed. The well-known biuret assay is based on the reaction of proteins with copper ions under strong alkaline conditions to form a copper-protein complex. Yet, copper ions may seriously interfere with the determination if the measurement is made in the UV range. In the present approach, proteins mobilize copper ions from insoluble salts at different pH values, and the copper-protein complexes are investigated by UV spectrophotometry and mass spectrometry. Upon using copper phosphate, free copper ions do not interfere with the determination from 540 to 240 nm. Copper absorbance slowly increases from 240 to 190 nm where a blank with the reagents is recommended. A maximum absorbance for the copper-protein complex was found at 226 nm and high pH value. The stoichiometries of the copper-protein complexes measured directly with a mass spectrometer are pH dependent: half of the peptides without any histidine residue chelate just a single Cu²⁺ ion at pH 7.4 but each such peptide mobilizes from 1 to 6 Cu²⁺ ions at pH 10.3. To determine proteins, 1-1.5 ml of 1.8% KOH solution with 0-20 μg ml⁻¹ protein is treated with 25 mg of copper phosphate powder. The mixture is powerfully stirred, centrifuged, and the absorbance of the supernatant is measured at 226 nm in 1 cm quartz cuvettes against a blank of the reagents. The color system obeys Beer's law in the range 0.1-20 μg ml⁻¹ protein at this wavelength. The molar absorptivity value proved to be a characteristic of each protein being analyzed. Therefore, individual proteins should be used to plot calibration curves. This assay proved to be over 100 times more sensitive than the classical biuret procedure. The method is highly selective and the determination is little affected by the presence of other substances. All other important analytical parameters were studied and practical applicability of the method has been verified by the analysis of some biological materials.     

Sensitive indirect spectrophotometric determination of isoniazid

A simple, rapid, sensitive and accurate indirect spectrophotometric method for the microdetermination of isoniazid (INH) in pure form and pharmaceutical formulations is developed. The procedure is based on the reaction of copper(II) with isoniazid in the presence of neocuproine (NC). In the presence of neocuproine, copper(II) is reduced easily by isoniazid to a Cu(I)-neocuproine complex, which shows an absorption maximum at 454 nm. By measuring the absorbance of the complex at this wavelength, isoniazid can be determined in the range 0.3-3.5 microgml-1. This method was applied to the determination of isoniazid in pharmaceutical formulation and enabled the determination of the isoniazid in microgram quantities (0.3-3.5 microgml-1). The results obtained for the assay of pharmaceutical preparations compared well with those obtained by the official method and demonstrated good accuracy and precision.     

A selective spectrophotometric method for determination of copper with ferron

A selective spectrophotometric determination of copper is based on extraction of the copper-ferron complex with tribenzylamine in chloroform at low acidity, and measurement of the absorbance of the yellow extract at 410 nm. Beer's law is found to hold up to 8 microg/ml copper concentration. Of 30 elements tested, only molybdenum interferes. The ratio copper:ferron:tribenzylamine in the extracted species is 1:2:2.     

Studies on extraction of Cu(II), Ga(III), In(III) and Tl(III) with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one Separation and spectrophotometric determination of copper and gallium

The extraction of Cu(II), Ga(III), In(III) and Tl(III) with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HPMBzP) from aqueous solutions has been investigated. The mechanism of extraction and the composition of the species extracted has been determined. The effect of equilibration time, various organic solvents and salting-out agents on the extraction of copper and gallium has also been investigated. The green Cu(PMBzP)₂ chelate has absorption maxima at 298 and 670 nm, and PMBzP has maximum absorbance at 290 nm. A new and sensitive spectrophotometric method for copper has been devised, based on the absorbance at 670 nm. The presence of excess of reagent does not interfere and no special treatment is necessary to destroy it. The proposed method has some advantages and has been applied for the determination of copper in various soil samples. Gallium has been separated from indium, thallium, copper, iron and many other elements. The recovery of gallium and copper was 100 ± 0.2%.     

Spectrophotometric determination of gallium in alloys and fly-ash with pyridoxal derivatives of thiocarbohydrazide and carbohydrazide

The symmetric derivatives of pyridoxal with thiocarbohydrazide and carbohydrazide, and the asymmetric derivatives of pyridoxal and salicylaldehyde with the same hydrazides have been synthesized and their analytical potential for spectrophotometric and kinetic fluorimetric determination of metal ions was studied. Gallium(III) and PyMAU(1,3-bis{[4-(2-methyl-3-hydroxy-5-hydroxymethyl)pyridyl]methyleneaminourea at pH = 4.2 form a complex with a single absorption maximum at 425 nm, which can be extracted into cyclohexanone in the presence of a controlled amount of sodium perchlorate. The extract has maximum absorbance at 435 nm. Both systems can be used for determining gallium. The optimal range of gallium concentration for measurement in a 1-cm cell is 0.5-1.25 gmg/ml for the procedure in homogeneous medium ((425) = 3.76 x 10(4).mole(-1).cm(-1)) and 0.25-1.25 mug/ml for the extraction procedure ((435) = 5.30 x 10(4) 1.mole(-1).cm(-1). The latter procedure has been applied to the determination of gallium in alloys and fly-ash.     

Rapid separation and determination of mercury

An analytical procedure is described for the separation of mercury(II) by extraction into n-octanol from sulphuric acid solution and then back-extraction as the tetraiodo complex. The mercury is determined by measuring the absorbance of this complex at 322 nm (molar absorptivity 1.95 x 10(3) l.mole(-1).cm(-1)). The procedure is applicable to samples containing copper; the effects of a wide variety of other impurities are tabulated.     

Copper(II)-cetyltrimethylammonium chloride-chromal blue G ternary complex and its application to the spectrophotometric determination of copper(II)

A sensitive spectrophotometric method for the determination of copper(II) based on a ternary complex with chromal blue G, a triphenylmethane reagent in the presence of cetyltrimethylammonium chloride, is described. The sensitivity of color reaction between copper and chromal blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride, a cationic surfactant. The color development of the ternary complex can be utilized in the highly sensitive spectrophotometric determination of copper. The molar absorptivity of the binary complex between copper and chromal blue G ε_630nm = 9.56 × 10³liters · mol⁻¹ · cm⁻¹ is enchanced on ternary complex formation to ε_{542 nm} = 4.78 × 10⁴liters · mol⁻¹ · cm⁻¹. The ternary complex gave a maximal absorbance at 542 nm in the pH range 9.8–11. Beer's law is obeyed up to at least 1.2 ppm of copper. The maximal absorbance of the ternary complex was found to develop within 5 min and then it remains constant for several hours. The formation constant of the ternary complex is calculated to be 8.6 × 10¹⁰ under these conditions.     

Indirect Spectrophotometric Determination of Vanadium(IV) by Flow Injection Analysis Based on the Redox Reaction with Copper(II) in the Presence of Neocuproine

Abstract

An indirect photometric method with a continuous-flow analysis is presented for the determination of trace amounts of vanadium(IV). It is based on the redox reaction of copper(II) with vanadium(1V) in the presence of neocuproine. In the presence of neocuproine, copper(I1) is reduced easily by vanadium(I V) to a copper(1)-neocuproine complex, which shows a n absorption maximum at 454 nm. By measuring t h e absorbance of the complex at this wavelength, vanadium(1V) in t h e range 2×10^?6 - 8 × mol dm^?5 mol dm^?3 can be determined at a rate of 120 samples h^?1. The fractional determination of vanadium(1V) and iron(I1) is also studied.     

Simultaneous dual wavelength spectrophotometric determination of citric and ascorbic acids using an artificial neural network

In this study, a very simple spectrophotometric method for the simultaneous determination of citric and ascorbic acid based on the reaction of these acids with a copper(II)-ammonia complex is presented. The Cu²⁺-NH₃ complex (with λ_max = 600 nm) was decomposed by citrate ion and formed a Cu²⁺-citrate complex (with λ_max = 740 nm). On the other hand, during the reaction of ascorbic acid with copper(II)-ammonia complex, ascorbic acid is oxidized and the copper(II)-ammonia complex is reduced to the copper(I)-ammonia complex and the absorbance decreases to 600 nm. Although there is a spectral overlap between the absorbance spectra of complexes Cu²⁺-NH₃ and Cu²⁺-citrate, they have been simultaneously determined using an artificial neural network (ANN). The absorbances at 600 and 740 nm were used as the input layer. The ANN architectures were different for citric and ascorbic acid. The output of the citric acid ANN architecture was used as an input node for the ascorbic acid ANN architecture. This modification improves the capability of the ascorbic acid ANN model for the prediction of ascorbic acid concentrations. The dynamic ranges for citric and ascorbic acid were 1.0–125.0 and 1.0–35.0 mM, respectively. Finally, the proposed method was successfully applied to the determination of citric and ascorbic acids in vitamin C tablets and some powdered drink mixes. The text was submitted by the authors in English.     

Dual-wavelength spectrophotometric determination of copper in sea-water with alpha,beta,gamma, degrees -tetrakis(1-methylpyridinium-4-yl) porphine

Copper has been determined by dual-wavelength spectrophotometry with alpha,beta,gamma, degrees -tetrakis(1-methylpyridinium-4-yl) porphine (TMPyP). The difference in absorbance at the Soret band of the copper complex (423 nm) and that of TMPyP (446 nm) was measured. Copper in a coastal sea-water sample was preconcentrated with a Chelex-100 separation in which l-cysteine was used as eluent. This combination could determine copper at the ng/ml and sub-ng/ml level.     

Spectrophotometric microgram determination of copper in organic compounds by wet or oxygen flask combustion

Summary Spectrophotometric Microgram Determination of Copper in Organic Compounds by Wet or Oxygen Flask Combustion A spectrophotometric method for the microgram (2–30 ppm) determination of copper in organic compounds after wet digestion or oxygen flask combustion has been developed. The copper content is determined through the formation of the molybdenum blue complex, which is formed by the addition of 1 ml of each of 1% KCN, 1% phosphomolybdic acid and 1M HCl solutions, in the order mentioned. The absorbance is measured at 725 nm. A series of 10 compounds with 10–40% copper gave highly satisfactory results. The total average error is ±0.05% and the overall standard deviation value is 0.220. The method described is rapid, simple and accurate; the reagents required are cheap and readily available.     

The use of phenylfluorone in the presence of cetylpyridinium chloride and Triton X-100 for the spectrophotometric determination of copper(II) in blood serum

A simple and sensitive spectrophotometric method for determination of copper(II) is based on the formation of a blue coloured complex of Cu(II) with 9-phenyl-2,3,7-trihydroxy-6-fluorone (PF) in the presence of cetylpyridinium chloride (CP) and Triton X-100, has been developed. Optimum concentrations of PF, CP, Triton X-100 and pH ensuring maximum absorbance were defined. The complex Cu(II)-PF-CP-Triton X-100 shows maximum absorbance at 595 nm with a molar absorptivity value of 9.67x10(4) l mol(-1) cm(-1). The detection limit of the method is 0.028 mug ml(-1). Beer's law is obeyed for copper concentrations in the range 0.04-0.4 mug ml(-1). The studies of the effect of foreign ions on determination of copper, show that the selectivity of the method is poor. The cations of alkali metals and anions Br(-), Cl(-), I(-), F(-), NO(2)(-), NO(3)(-), CH(3)COO(-), SO(4)(2-), S(2)O(3)(2-), PO(4)(3-), citrates (examined in 1000-fold molar excess over copper) do not affect the determination. All cations forming complexes with PF have an interfering effect. The statistical evaluation of the method was carried out for six determinations using 10 mug of Cu and the following results were obtained: the standard deviation, SD=0.042, the confidence interval mu(95)=10.1+/-0.1 mug Cu. The method has been applied for determination of copper in blood serum.