A study of the titrimetric potassium silicofluoride method for determination of silica in aluminosilicate materials

A critical study of the titrimetric potassium silicofluoride method for determination of silica reveals that quantitative precipitation of the sificofluoride is possible in 3.5-7.5N acid containing 1% sodium fluoride and >/ 12% potassium chloride. An aqueous wash solution (pH approximately 5.3) containing 0.1% sodium fluoride and 12% potassium chloride has been found ideal for washing the precipitate without significant hydrolysis even at 35 degrees C. The interference of large amounts of aluminium (up to 160 mg of Al(2)O(3)) is eliminated by precipitating the silicofluoride in 6-7.5N acid solution, the aluminium then forming practically no fluoro-complex, because of extensive protonation of fluoride. Interference by large amounts of boron (up to 160 mg of B(2)O(3)) is eliminated by precipitating silicofluoride with the minimum permissible potassium chloride concentration (12%) and washing with the aqueous wash solution at room temperature. Nitrazene Yellow has been used as a more sensitive indicator.     

Cryolite precipitation by the Reaction of aluminium salt with sodium fluoride in aqueous solution

When aqueous solution of aluminium salt involving nitrate, chloride or sulfate was added into sodium fluoride solution, an immediate reaction occured to form cryolite-like precipitate. Examination into the resultant solution and analysis for the precipitate were carried out, leading to the fact that fluorine ion can substitute for bound water molecules around central Al⁺⁺⁺ ion, but hardly for bound hydroxide and sulfate ion which should go or be “frozen”, as it is, into cryolite-like precipitate. These ligand substitution reaction seems to contribute to identification of ion species of aluminium in aqueous solution.     

Spectrophotometric determination of bismuth in copper and cartridge brass by the iodide method

An improved spectrophotometric method is proposed for the determination with iodide of trace amounts of bismuth in copper and cartridge brass. The sample is dissolved in nitric acid and the bismuth is separated from the copper by an ammoniacal precipitation in the presence of iron(III) hydroxide as a gathering agent. The hydroxide precipitate is dissolved in hydrochloric acid, sulfuric acid is added, the solution is evaporated to a few ml, hydrobromic acid is added to volatilize the antimony and tin, and the solution is evaporated to fumes of sulfuric acid. The bismuth iodide color is then developed with a composite potassium iodide—sodium hypophosphite reagent. Factors affecting the bismuth iodide color are investigated.     

Potentiometric microdetermination of aluminium in organic compounds after combustion in a modified oxygen flask

The microdetermination of aluminium in organic compounds by oxygen flask combustion, a simultaneous fusioncombustion procedure was developed, in which the sample in a mixture with KHSO₄ is burnt in a modified oxygen flask under suitable conditions so that the alumina formed is immediately converted into the corresponding water-soluble sulfate. 2.4 ml of 6M HCl are used as absorption solution, in which the combustion residue is completely dissolved by boiling. The solution is then transferred to a titration cell, neutralized with NaOH in the presence of methyl red, and the Al(III) is finally determined in a buffered 40% (V/V) dioxane solution by potentiometric titration with 0.1 M NaF. The results obtained were accurate within ±0.13%; the recoveries of Al are in the range of 99.00 to 99.90%; the standard deviation amounts to 0.06%. The potentiometric titration of Al(III) with fluoride as well as the conditions of the oxygen flask combustion of organic aluminium compounds are discussed.     

氟-铝络合滴定计算分析法测定乙醇-水溶液介质中的铝

导出了氟离子标准溶液滴定铝离子的络合滴定计算分析的数学模型。以氟离子选择性电极作指示电极,利用氟离子与铝离子在乙醇-水溶液中产生沉淀,仅形成3种络合物的现象,先计算出3个条件累积稳定常数,再计算出铝离子的分析浓度。通过氢氧化铝的条件溶度积常数,求出溶液控制的pH值约为4．7。讨论了滴定数据的位置对测定结果的影响。     

Determination of fluoride in natural waters by ion-selective electrode potentiometry after co-precipitation with aluminium phosphate

The most effective conditions for masking aluminium in the determination of mug/1. levels of fluoride in water by ion-selective electrode potentiometry after co-precipitation with aluminium phosphate have been re-examined. The effectiveness of citrate for masking aluminium increases with pH, and up to 1.5 x 10(-2)M aluminium can be masked quantitatively at pH 8.5. Fluoride (5-100 mug in 500 ml of sample solution) is quantitatively co-precipitated at pH 4.7 with approximately 90 mg of aluminium phosphate. After dissolution of the precipitate and adjustment of the solution to pH 8.5 with TISAB, the fluoride content can be measured with a fluoride ISE. The method is simple and rapid, and is suitable for the determination of trace amounts of fluoride in various water samples.     

The simultaneous determination of copper and iron in high purity aluminium using the k 1000 cathode ray polarograph

An accurate simultaneous determination of copper and iron in 99 99% aluminium can be carried out in 10–15 min, using the linear sweep polarograph. Lead can also be determined in the same solution The basic electrolyte used is sodium hydroxide and sucrose, but the addition of ethylene-diaminotetraacetic acid (EDTA) is necessary if manganese is present. The effect of EDTA on the reduction wave of copper and iron has been investigated     

Effect of interfering ions on hexamethyldisiloxane microdiffusion method

Acid diffusion in the presence of hexamethyldisiloxane (HMDS) enables complete recovery of ionic fluoride from standards containing varying concentrations of aluminium as one of the main interfering ions. Acid diffusion without HMDS shows a decrease in fluoride recovery as aluminium ion concentration increases. The fluoride concentration in the trapping solution is determined directly on the diffusion cover with a combination fluoride electrode after neutralising and buffering. The same procedure was used for the analysis of fluoride in soil and plant materials containing high concentrations of aluminium ions. For the same samples, the concentrations of aluminium, iron and silicon were determined using atomic absorption spectrophotometer (AAS).     

Rapid EDTA determination of lead in binary alloys of lead and tin

Binary alloys of lead and tin were dissolved in nitric acid (1 + 1) containing 10% sodium fluoride. The tin(IV) was effectively masked by the fluoride. The lead was quickly and accurately titrated with EDTA in a hexamine-buffered solution, with Xylenol Orange as indicator.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Comparing Dichromate Oxidation and Size Exclusion Chromatography of Dissolved Carbohydrates

Standardised methods are used to characterise the pulp or cellulosic material for its alkali resistance and alkali solubility. Today, pulp is usually characterised by its solubility in sodium hydroxide. The characterisation test was based on the treatment of pulp with sodium hydroxide solution of a defined concentration, according to a specified procedure. The dissolved organic matter was then determined by dichromate oxidation. The results obtained by size exclusion chromatography showed that both the amount and the molecular weight of the dissolved carbohydrates vary when investigating solubility and α-cellulose content of pulps. The results show further that S₁₈ values obtained by dichromate oxidation are overestimated when characterising pulps containing higher amounts of hemicellulose and/ or short chain cellulose, compared with results obtained by the SEC method. On the contrary, S₁₀ values are overestimated when determined by dichromate oxidation in higher alpha pulps.     

The Determination of Sodium in Alumina Using a Sodium Selective Ion Electrode

Abstract

A method has been developed for the determination of sodium in alumina using a selective ion electrode. The alumina sample is dissolved in ammonium hydrogen fluoride in platinum crucibles or sintered with boric acid using either platinum, nickel, or zirconium crucibles. Either dissolution technique completely extracts all available sodium. After dissolution, and in the presence of citrate to prevent aluminum hydroxide precipitation, the pH is adjusted to 8.7 with ammonium hydroxide, and the sodium concentration is determined by a sodium selective ion electrode.     

Separation and determination of dissolved and particulate humic substances in river water

Distribution of humic and fulvic acids in participate or dissolved form is studied by using simple leaching and sorption techniques. After filtration of water sample (100–200 ml), the filter along with suspended particles is treated with 5 ml of chloroform and 3 ml of 0.1 mol/l sodium hydroxide solution. The filter dissolves completely in the organic phase, while the suspended particles remain in the aqueous phase enabling a leaching of humic substances. The leaching is repeated once more with 2 ml of 0.1 mol/l sodium hydroxide solution. The humic and fulvic acids in the combined solution are fractionated at pH l by filtration, where the membrane filter is preliminarily coated with sodium dodecyl sulfate. On the other hand, dissolved humic substances are concentrated from a 50-ml filtered sample by sorption on a DEAE-cellulose column. They are desorbed with 5 ml of 0.1 mol/l sodium hydroxide solution and fractionated at pH 1. The spectrophotometric analysis of river water reveals that fulvic acid is predominant in suspended particles as well as in filtered samples. The concentration of dissolved humic and fulvic acids is approximately ten times that of suspended particles.     

硅钙合金中钙、铝的联合测定

硅钙合金用硝酸、氢氟酸溶解后，加入高氯酸并加热至冒烟以驱除氟，然后定容。移取两份样品溶液，一份中加入三乙醇胺溶液掩蔽铁、铝等干扰离子，再加入氢氧化钾溶液，使pH=12，用EDTA容量法测定钙。另一份中加入铁标准溶液、混合显色液（Zn-EDTA与络天青S的混合溶液）及六次甲基四胺缓冲溶液，用光度法测定铝。方法简便，结果准确、可靠。     

Determination of fluoride in zinc concentrates, processing products and solutions with an ion-specific electrode

Determination of fluoride in hydrometallurgical zinc-plant processing products and solutions with a fluoride-ion electrode is described. Various types of buffers were tested, to find a suitable common buffer for use in analysis of all types of substances generated at the zinc plant. The method involves decomposition of samples either by fusion with sodium hydroxide or by leaching with perchloric acid to bring fluoride into solution. The fluoride concentration is measured directly with a fluoride-specific electrode. In standard addition tests 100% recovery was obtained when a citric acid/sodium nitrate buffer was used. Validation tests gave satisfactory results.     

碱融浸取–离子选择电极法测定固体废物中的总氟

采用氢氧化钠熔融浸取固体废物中的氟,用离子选择电极法测定其中的总氟含量。固体废物样品经氢氧化钠高温熔融后,以热纯水浸取并加入适量的盐酸使溶液呈弱碱性,去除主要干扰离子。测定氟的线性范围为5.00~500μg,线性相关系数r=0.999 6,检出限为12.5 mg/kg。6种类型固体废物样品的加标回收率在90.4%~110.0%之间,测定结果的相对标准偏差为2.3%~4.6%(n=6)。该方法样品预处理简单、重现性好、检出限低,适用于多种固体废物中总氟的测定。     

黄钠铁矾中铁的测定

准确快速测定黄钠铁矾中铁的含量有利于控制铁湿法冶金的流程。采用氢氧化钠溶液分解试样,盐酸(1+9)溶解滤渣,蒸发除过量酸,氨水沉淀分离铜、镍、钴等元素,再用稀盐酸溶解沉淀。在盐酸介质中,SnCl_2将大部分Fe(Ⅲ)还原为Fe(Ⅱ),钨酸钠为指示剂,用TiCl_3还原呈钨蓝色,重铬酸钾滴定至蓝色褪去。再以二苯胺磺酸钠为指示剂,重铬酸钾标准溶液滴定测定样品中铁的含量。实验表明,黄钠铁矾中共存干扰元素绝大部分被分离,同时与酸溶解法进行比较,测定数据一致,相对标准偏差(n=9)小于0.1%。     

Spectrophotometric determination of tantalum in ores and mill products with brilliant green after separation by methyl isobutyl ketone extraction of tantalum fluoride

A method for determining ~ 0.001% or more of tantalum in ores and mill products is described. After fusion of the sample with sodium carbonate, the cooled melt is dissolved in dilute sulphuric-hydrofluoric acid mixture and tantalum is separated from niobium and other matrix elements by methyl isobutyl ketone extraction of its fluoride from 1M hydrofluoric acid-0.5M sulphuric acid. The extract is washed with a hydrofluoric-sulphuric acid solution of the same composition to remove co-extracted niobium, and tantalum is stripped with dilute hydrogen peroxide. This solution is acidified with sulphuric and hydrofluoric acids and evaporated to dryness, and the residue is dissolved in oxalic-hydrofluoric acid solution. Tantalum is ultimately determined spectrophotometrically after extraction of the blue hexafluorotantalate-Brilliant Green ion-association complex into benzene from a 0.05M sulphuric acid-0.5M hydrofluoric acid-0.2M oxalic acid medium. The apparent molar absorptivity of the complex is 1.19 x 10(4) l.mole(-1).mm(-1) at 640 nm, the wavelength of maximum absorption. Common ions, including iron, aluminium, manganese, zirconium, titanium, molybdenum, tungsten, vanadium, tin, arsenic and antimony, do not interfere. Results obtained by this method are compared with those obtained by an X-ray fluorescence method.     

Adsorption and Structural Properties of Mineral–Carbon Sorbents

In the present work an attempt was made to obtain mineral–carbon sorbents by thermal decompositon. The mineral matrix for the sorbents (aluminium hydroxide) was based on petrochemical waste stream containing considerable amounts of aluminium chloride. Reference tests were carried out with a model solution prepared with the use of analytical grade AlCl₃. Atactic polypropylene and hydrocarbon mixtures obtained in the flotation of petrochemical waste waters were used as carbon-containing raw materials. The aim of this work was to determine the adsorption and structural characteristics of the complex sorbents and to check the possibility of evaluation of their hydrophobic-hydrophilic properties. This revised version was published online in August 2006 with corrections to the Cover Date.     

Herstellung und Eigenschaften von Aluminiumaquoxid. II. Böhmit aus Natriumaluminat und Salpetersäure

Preparation and Properties of Aluminium Hydroxide. II. Boehmite from Sodium Aluminate and Nitric Acid A report is given on the physical-chemical characteristics of aluminium hydroxide which contain mainly boehmite, having been obtained by continuous precipitation from sodium aluminate solution with nitric acid using technical raw materials and conditions being very similar to those applied in production. The influence of the reaction conditions (pH value, temperature, concentration and residence time in the precipitation suspension) on the chemical composition, structure and texture of the hydrogels is studied. With rising precipitation temperature the pH range extends, within which already after short residence times pure-phase, relatively well crystalline boehmite hydrogels are obtained in the precipitated solution.