Interaction of acid and alkali treated titanium with dynamic simulated body environment

Interaction of acid and acid+alkali treated titanium samples with simulated body fluid was studied. In case of alkali treated titanium, the dynamic arrangement of the test enabled the detection of primary calcium and phosphate ion adsorption from the solution and later apatite crystal growth (XRD). The induction time for crystal growth was 24.2±0.3 h. On acid-only treated titanium no crystal growth was detected. The calcium phosphate adsorption layer formed on the acid treated samples was detectable by XPS only, however it differed from that one formed on the acid+alkali treated samples. The adsorption layer formed on the acid+alkali treated samples contained larger amount of calcium, especially in the shortest exposure times. Charging of the apatite crystallites during the XPS measurement enabled the determination their Ca/P ratio separately from Ca/P ratio of the adsorption layers. XPS and EDS analyses indicated that the spherulitic crystallites consisted of carbonated hydroxyapatite with the Ca/P ratio close to that one of the stoichiometric hydroxyapatite. It is proposed that the adsorption layer formed spontaneously and immediately on the acid+alkali treated titanium can provide an ideal interface between the metal implant and the apatite cement line, the first structure formed by osteoblast cells during the formation of the new bone on foreign surfaces. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influence of hydrothermal exposure on surface characteristics and corrosion behaviors of anodized titanium

Titanium surface was modified by anodization in phosphoric acid solution at the voltages of 100 and 250 V, respectively. Surface characteristics and corrosion behaviors of anodized titanium were investigated before and after hydrothermal exposure in 3.5 wt.% NaCl solution at 160 °C for 24 h. It was found that anodization at 100 and 250 V resulted in the formation of a dense and a porous TiO₂ layer, respectively. The existence of anatase in the oxide layers of the 250‐V samples was confirmed by X‐ray diffraction analysis but not in the oxide layers of the 100‐V samples. After the hydrothermal exposure, the surface morphology of the 100‐V sample changed significantly, and discrete nanorods were formed on the surface. In contrast, the 250‐V sample basically preserved their original surface structures after the exposure except that numerous closely packed nanoparticles emerged on the surface. X‐ray diffraction analysis indicated that the exposure transformed the amorphous oxides into crystalline anatase. The corrosion behavior investigation of anodized titanium showed that the hydrothermal exposure had slight influence on the corrosion resistance of the 100‐V samples but decreased the corrosion resistance of the 250‐V samples significantly. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and surface properties of polyurethane modified by polysiloxane

A series of polyurethanes modified by polysiloxane (Si-PU) were synthesized based on 2,4-toluene diisocyanate (TDI), dihydroxybutyl-terminated polydimethylsiloxane (DHPDMS), polytetramethylene glycol (PTMG) and 1,4-butanediol (BDO). Fourier transform infrared spectroscopy analysis showed that DHPDMS had been incorporated into the polyurethane chains. With the increase of DHPDMS content, the water contact angle increased while the surface tension decreased. As the DHPDMS content increases above 5%, both the contact angle and the surface tension tend to approach a constant. The contact angle increases with increasing temperature, and it tends to approach a constant when the temperature is higher than 50°C. The result indicates that Si-PU exhibits good surface and mechanical properties when the DHPDMS content is 5%. __________ Translated from Polymer Materials Science and Engineering, 2007, 23(3): 47–50 [译自: 高分子科学与工程]     

The effect of annealing temperatures on surface properties,hydroxyapatite growth and cell behaviors of TiO2 nanotubes

Well‐ordered TiO₂ nanotubes were prepared by the electrochemical anodization of titanium in an ethylene glycol electrolyte containing 1 wt% NH₄F and 10 wt% H₂O at 20 V for 20 min, followed by annealing. The surface morphology and crystal structure of the samples were examined as a function of the annealing temperature by field emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD), respectively. Crystallization of the nanotubes to the anatase phase occurred at 450 °C, while rutile formation was observed at 600 °C. Disintegration of the nanotubes was observed at 600 °C and the structure vanished completely at 750 °C. Electrochemical corrosion studies showed that the annealed nanotubes exhibited higher corrosion resistance than the as‐formed nanotubes. The growth of hydroxyapatite on the different TiO₂ nanotubes was also investigated by soaking them in simulated body fluid (SBF). The results indicated that the tubes annealed to a mixture of anatase and rutile was clearly more efficient than that in their amorphous or plain anatase state. The in vitro cell response in terms of cell morphology and proliferation was evaluated using osteoblast cells. The highest cell activity was observed on the TiO₂ nanotubes annealed at 600 °C. Copyright © 2010 John Wiley & Sons, Ltd.     

Influence of humidity and acidity of the titanium dioxide surface on the kinetics of photocatalytic oxidation of volatile organic compounds

The influence of the humidity and acidity of the TiO₂ surface on the kinetics of the photocatalytic processes of deep oxidation of volatile organic compounds was studied. At 20 °C the rates of acetone and benzene oxidation are maximum at the coverages of TiO₂ with water close to monolayer and are 3—5 times higher than that in the dry atmosphere. The activation energy of benzene oxidation (E _a = 6.3±0.4 and 43.0±3.2 kJ mol^–1 at relative humidities of 8 and 70%, respectively) at a humidity higher than 30% decreases according to the exponential law with an increase in the surface acidity when multilayer water films are formed on the surface. Under the real conditions of operation of photocatalytic air purifiers, a TiO₂ particle is covered by water nanofilms. As in aqueous solutions, photoprocesses on the TiO₂ surface depend substantially on the solvation of the participants of the reaction, the formation of the double electric layer, and the concentration of the electrolyte (due to the dissociation of the surface acid-base groups).     

Characteristics of morphology,structure and composition of titanium surface under its modification by electrochemical polarization in phosphate‐alkaline solutions

The modification of titanium surface under electrochemical polarization (EP) in the phosphate‐alkaline solutions has been studied using the methods of X‐ray diffraction, electron probe microanalysis, atomic force microscopy, X‐ray photoelectron spectroscopy (XPS), cyclic voltammetry and spectroscopic ellipsometry. It is shown that the morphological parameters of the surface, e.g. roughness and stringiness, as well as its structural‐chemical characteristics, e.g. preferred orientation, size and habit of crystallites, titanium chemical forms, thickness and phase composition of oxide film are generally dependent on the polarization potential. The characteristics of titanium surface modified at low anodic potentials 500, 750 and 1000 mV and 10‐min polarization time have been measured. The processes of Ti surface dissolution and etching along grain boundaries are found to be most intensive at 750 mV. Under 500 mV, these processes are poorly developed yet, while at 1000 mV, the surface passivating film formation limits the previous processes. Despite relatively low polarization potentials (1 V), the surficial oxide films have sufficient thickness (up to ~20 nm) and a specific multilayer structure of variable composition and oxidation state of titanium. The data obtained allow to assert that EP represents an effective tool for morphological and a structural chemical modification of a titanium surface. Copyright © 2015 John Wiley & Sons, Ltd.     

Surface modification of titanium by anodic oxidation in phosphoric acid at low potentials. Part 1. Structure,electronic properties and thickness of the anodic films

Titanium surface characteristics determine the degree of success of permanent implants. The topography, morphology of the surface in micro and nano scales, the impurities present and other characteristics are a main concern, and therefore a multi‐technique approach is required in order to evaluate modification process effects on the surface. Surface modification of titanium in the nanometrical range was performed by means of anodisation in phosphoric with the aim of improving both the biocompatibility and the corrosion resistance in the biological media. Biocompatible characteristics of the modified titanium surface, as the presence of anatase in the oxide film and the incorporation of phosphate to the surface, were determined. Moreover, the electronic properties of the surface oxide presented a carrier number adequate for biomedical applications. The increase in the film thickness from 3 to 42 nm was estimated from EIS results when anodising potentials from 0 to 30 V were applied, whereas a bi‐layer structure of the protective oxides formed was determined. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation,characterization, and assessment of cytotoxicity,antioxidant, antibacterial,antifungal, and cutaneous wound healing properties of titanium nanoparticles using aqueous extract of Ziziphora clinopodioides Lam leaves

In recent decades, nanotechnology is growing rapidly owing to its widespread application in science and industry. The aim of the experiment was chemical characterization and evaluation of cytotoxicity, antioxidant, antibacterial, antifungal, and cutaneous wound healing activities of titanium nanoparticles using aqueous extract of Ziziphora clinopodioides Lam leaves (TiNPs@Ziziphora). These nanoparticles were characterized by fourier transformed infrared spectroscopy (FT‐IR), field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectroscopy (EDS), and UV–visible spectroscopy. The synthesized TiNPs@Ziziphora had great cell viability dose‐dependently (Investigating the effect of the plant on human umbilical vein endothelial cells (HUVECs) cell line) and revealed this method was nontoxic. Then, 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) free radical scavenging test was done to assess the antioxidant properties, which indicated similar antioxidant potentials for TiNPs@Ziziphora and butylated hydroxytoluene. Agar diffusion tests were applied to determine the antibacterial and antifungal characteristics. Minimum Inhibitory Concentration (MIC), Minimum Bactericidal Concentration (MBC), and Minimum Fungicidal Concentration (MFC) were specified by macro‐broth dilution assay. The data were analyzed by SPSS 21 software (Duncan post‐hoc test). TiNPs@Ziziphora indicated higher antibacterial and antifungal effects than all standard antibiotics (p ≤ 0.01). Also, TiNPs@Ziziphora inhibited the growth of all bacteria at 2‐16 mg/ml concentrations and removed them at 2‐32 mg/ml concentrations (p ≤ 0.01). In case of antifungal properties of TiNPs@Ziziphora, they prevented the growth of all fungi at 2‐8 mg/ml concentrations and destroyed them at 2‐16 mg/ml concentrations (p ≤ 0.01). In vivo experiment, after creating the cutaneous wound, the rats were randomly divided into six groups: untreated control, treatment with Eucerin basal ointment, treatment with 3% tetracycline ointment, treatment with 0.2% TiO₂ ointment, treatment with 0.2% Z. clinopodioides ointment, and treatment with 0.2% TiNPs@Ziziphora ointment. These groups were treated for 10 days. For histopathological and biochemical analysis of the healing trend, a 3 × 3 cm section was prepared from all dermal thicknesses at day 10. Use of TiNPs@Ziziphora ointment in the treatment groups substantially reduced (p ≤ 0.01) the wound area, total cells, neutrophil, and lymphocyte and remarkably raised (p ≤ 0.01) the wound contracture, hydroxyl proline, hexosamine, hexuronic acid, fibrocyte, and fibrocytes/fibroblast rate compared to other groups. In conclusion, the results revealed the useful non‐cytotoxic, antioxidant, antibacterial, antifungal, and cutaneous wound healing effects of TiNPs@Ziziphora.     

Control through monomer placement of surface properties and morphology of fluoromethacrylate copolymers

The arrangement of monomers and morphology of fluorinated copolymers of methyl methacrylate (MMA) were found to be important for controlling the surface energy of the materials when formed into thin films. Novel copolymers of MMA and 2,2,3,3,4,4,4‐heptafluorobutyl methacrylate (F3MA) were prepared with different monomer placement, namely statistical and block arrangements of the monomer units. The surface energies decreased with increasing incorporation of F3MA, in a manner consistent with previous reports for similar copolymers; however, the surface energies of the block copolymers were consistently lower than the statistical copolymers. This was interpreted as arising from conformational restriction of presentation of the fluoromonomers to the surface in the statistical copolymers, and formation of phase‐separated domains at the surface of the block copolymers. The morphology of the block copolymers was confirmed by small angle X‐ray scattering measurements, which allowed calculation of a solubility parameter for the fluorinated segments. The results have implications for the design of more environmentally acceptable materials with ultra‐low surface energies. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2633–2641     

Parameter settings in a compact laser-nitriding system for titanium composed of a focused pulsed Nd:YAG laser and nitrogen gas blow

The aim of the present study was to form a nitride layer on a titanium (Ti) substrate through a compact laser-nitriding system comprising a focused pulsed Nd:YAG laser and nitrogen gas blow. To obtain a high-quality layer, the effects of pulse frequency and gas flow rate on the surface characteristics were investigated by using plasma emission analysis as well as X-ray analyses. Optical emission spectra from the laser-induced plasma mainly consisted of ionic Ti lines, and their intensities when the pulse frequency was 15 Hz were much higher than those for 8 Hz. Similarly, the reflections from the δ-TiN phase in the X-ray diffraction (XRD) pattern were enhanced when using 15 Hz. On the other hand, the flow rate of nitrogen gas blow had a significant effect on the thickness of the thin oxide layer that formed above the nitride layer. Using a lower flow rate resulted in the formation of a thicker oxide layer. The higher pulse frequency and the faster flow rate were beneficial for obtaining a higher-quality layer because of the enhancement of nitridation and the suppression of oxidation, respectively.     

First‐principles calculations of the stability and electronic properties of the PbTiO3 (110) polar surface

The structural and electronic properties of five terminations of cubic lead titanate (PbTiO₃) (110) polar surface were investigated by first‐principles total‐energy calculations using a periodic slab model. On the PbTiO termination, an anomalous filling of conduction band was observed, whereas on the O₂ termination, two surface oxygen atoms formed a peroxo group, demonstrating that the electronic structures of the two stoichiometric terminations undergo significant changes with respect to bulk materials. However, for the three nonstoichiometric TiO‐, Pb‐, and O‐terminated surfaces, their electronic structures are very similar to bulk. Charge redistribution results for the five terminations confirmed that electronic structure and surface composition changes are responsible for their polarity compensation. However, which mechanism actually dominates the stabilization process depends upon energetic considerations. A thermodynamic stability diagram suggested that the two stoichiometric terminations are unstable; however, the three nonstoichiometric terminations can be stabilized in some given regions. Furthermore, this study indicates that the very different stabilities and surface states filling behaviors of the PbTiO₃ (110) polar surface with respect to SrTiO₃ and BaTiO₃ ones seem to originate from the partially covalent characteristics of Pb O pairs. © 2008 Wiley Periodicals, Inc. J Comput Chem 2009     

The influence of Mn2+ and Ni2+ ions on the surface properties of the aluminium oxide samples using Q-TG and Q-DTG data

The paper presents the complex studies of adsorption and porosity of pure and modified–aluminium oxides samples. The presence of Mn²⁺ and Ni²⁺ modifiers on the aluminium oxide surface causes increase in water adsorption capacity and its decrease in the case of benzene and n-octane. This is due to decrease of specific surface area, volume and radius of pores as a result of surface impregnation and microcrystals formation during modification with manganese and nickel chlorides. Microcrystals formation on the surface and porosity decrease where confirmed by the AFM and SEM studies. From the Q-TG and Q-DTG data, the energies of liquid desorption from the surface of the samples and the functions of desorption, energy distribution were calculated. High degree of nonlinearity of the run of the functions resulting from great heterogeneity of the studied surface was found. Adsorption of cations creates more homogeneous surface of aluminium oxide, and it is responsible for the change in adsorbate molecule interaction energy and changes mechanism of adsorption and desorption as well as thickness and structure of the adsorbed film. From the experimental data some parameters characterizing adsorption properties and porosity of the studied samples were determined using the measuring methods (thermal analysis, sorptomate, porosimetry, AFM).     

A method for characterization of sea surface microlayer based on monolayer properties in presence and absence of phospholipids

Electrochemical impedance spectroscopy, ac voltammetry and fractal analysis were used to characterize model compounds, compound mixtures and extracted samples of sea surface microlayer (ssm) und underlying water (ulw). The reasons for carrying out this work were to use the scientific basis of these characterizations in future on-line analytical procedures of ssm. The mercury (Hg) drop electrode uncoated and coated with a monolayer of dioleoyl phosphatidylcholine (DOPC) was used as an experimental basis for investigation of the major sea surface film forming material. Firstly, the interaction of the uncoated and DOPC coated Hg electrode with model water insoluble compounds of increasing polarity was investigated. The compounds studied in order of increasing polarity were: nonadecane, stearic acid, cholesterol and cardiolipin. Subsequently the electrochemical response of the system to different ssm extracts was compared to signals observed with model compounds to demonstrate method selectivity. From the electrochemical results, it is observed that both the molecular structure and polarity of the investigated compounds have a role in their interaction with the uncoated and DOPC coated electrode. In the fractal analysis the increase above 2 of fractal dimension D imparted to the DOPC layer is related to the degree of apolarity of the additive model compound. Consistent with this, the more apolar hexane extracted ssm 2 imparts a fractal dimension D value of 2.45 when incorporated in DOPC layers. The electrochemical response to the ssm and ulw follows that characteristic of sterol compounds.     

Syntheses,supramolecular networks and Hirshfeld surface and thermal analyses of two new cadmium chloride coordination polymers with an N,O‐chelating ligand

Two new coordination polymers, namely poly[[(3‐aminopyrazin‐4‐ium‐2‐carboxylate‐κ²N¹,O)di‐μ‐chlorido‐cadmium(II)] monohydrate], {[CdCl₂(C₅H₅N₃O₂)]·H₂O}_n, (1), and poly[2‐amino‐3‐carboxypyrazin‐1‐ium [(3‐aminopyrazine‐2‐carboxylato‐κ²N¹,O)di‐μ‐chlorido‐cadmium(II)] monohydrate], {(C₅H₆N₃O₂)[Cd(C₅H₄N₃O₂)Cl₂]·H₂O}_n, (2), have been synthesized from the reaction of cadmium(II) chloride and 3‐aminopyrazine‐2‐carboxylic acid (Hapca) under mild conditions in acidic media. The two coordination polymers have been characterized by single‐crystal X‐ray diffraction and show chloride‐bridged zigzag chains with octahedrally coordinated metal ions, where Hapca acts as a bidentate ligand via the π‐conjugated N atom and a carboxylate O atom. The chains are further interconnected via noncovalent interactions into three‐dimensional supramolecular networks. The dominant H…O and H…Cl interactions for both compounds were quantified using Hirshfeld surface analysis. The thermal stability and topological analysis of the two‐dimensional networks of (1) and (2) are also discussed.     

Structure,atomic Hirshfeld surface,spectroscopic studies and magnetic and dielectric properties of new mixed solid solution (NH4)2Mn0.17Cu0.83Cl4⋅2H2O

The tetrachlorocupratmanganate dehydrate (NH₄)₂Mn_0.17Cu_0.83Cl₄?2H₂O has been prepared and characterized using various physicochemical techniques including Fourier transform infrared and Raman spectroscopies, differential scanning calorimetry and dielectric and magnetic measurements. A preliminary single‐crystal X‐ray diffraction structural analysis reveals that the title compound belongs to the tetragonal system with P4₍₂₎/mnm space group. The unit cell dimensions are: a = b = 7.5817(2), c = 7.9312(2) Å, with Z = 2. Its crystal structure was determined and refined down to R = 2%. The structure of this compound consists of discrete [Cu/MnCl₄?2H₂O]^2? octahedra interleaved with alkali cations. The cohesion and stabilization of the structure are provided by hydrogen bond interactions (N─H…Cl and O─H…Cl) between [NH₄]⁺ cation and [Cu/MnCl₄?2H₂O]^2? anion. Hirshfeld surface analysis has been performed to explore the behaviour of these weak interactions. Dielectric measurements confirm the transition temperatures determined using differential scanning calorimetry. The temperature dependence of the magnetic susceptibility was measured in the temperature range 10–300 K at various magnetic field intensities. Magnetic measurements reveal the occurrence of weak ferromagnetic behaviour at low temperature (T_c = 12 K). The ferromagnetic ordering is further confirmed by the presence of hysteresis loops.     

乳酸配合物(NH4)2[Sr(C3H5O3)4]的晶体结构、Hirshfeld表面分析和溶液化学性质

合成了无水乳酸配合物(NH₄)₂[Sr(C₃H₅O₃)₄]。用X射线单晶衍射仪对该配合物的晶体结构进行了表征,确定了其组成、空间结构和配位方式。绘制了配合物的Hirshfeld表面和2D指纹图,揭示了分子间的相互作用以及该配合物具有多个配位位点和较强的配位活性。根据相关的晶体数据计算出了该配合物的晶格能及其对应阴离子的摩尔体积,计算得到该配合物的晶格能为2742.9 kJ·mol^-1。用等温环境反应-溶解量热计测量了该配合物在298 K超纯水溶剂中的溶解焓。根据Pitzer电解质溶液理论,在298 K下获得了该配合物的无限稀释摩尔溶解焓△_sH_m^∞和Pitzer参数,确定该配合物的△_sH_m^∞为(114.01±0.04) kJ·mol^-1。计算了该配合物的表观相对摩尔焓(^ΦL)以及不同浓度下溶质和溶剂的相对偏摩尔焓(L₁和L₂)。最后,根据晶格能和△_sH_m^∞设计了热化学循环,并计算出了阴离子的水合焓值。热重和微商热重曲线进一步揭示了该配合物的结构。