Role of surfactants in the sorption of the whitening agent Tinopal CBS onto viscose fibers: a fluorescence spectroscopy study

In the present work, we studied the role of an anionic surfactant, sodium dodecyl sulfate, and a cationic surfactant, dodecyltrimethylammonium chloride, in the sorption of 4,4'-distyrylbiphenyl sodium sulfonate (Tinopal CBS) onto modified cellulose fibers. Fluorescence spectroscopy was used to quantify the amount of sorbed Tinopal CBS on the fiber surface. Differences in the spectral properties and the efficiency of sorption of the whitener/surfactant/fiber system are explained in terms of electrostatic interactions. Our results also show that the sorption efficiency is greater for solutions containing cationic surfactants only below the critical micelle concentration, while anionic surfactants show a smooth influence on the sorption process.     

Adsorption of a cationic surfactant onto cellulosic fibers I. Surface charge effects

The adsorption of four cationic surfactants with different alkyl chain lengths on cellulose substrates was investigated. Cellulose fibers were used as model substrates, and primary alcohol groups of cellulose glycosyl units were oxidized into carboxylic groups to obtain substrates with different surface charges. The amount of surfactant adsorbed on the fiber surface, the fiber zeta-potential, and the amount of surfactant counterions (Cl(-)) released into solution were measured as a function of the surfactant bulk concentration, its molecular structure, the substrate surface charge, and the ionic strength. The contribution of each of these parameters to the shape of the adsorption isotherms was used to verify if surfactant adsorption and self-assembly models usually used to describe the behavior of surfactant/oxide systems can be applied, and with which limitations, to describe cationic surfactant adsorption onto oppositely charged cellulose substrates.     

Alpha-Lactalbumin is unfolded by all classes of surfactants but by different mechanisms

We show that all four classes of surfactants (anionic, cationic, non-ionic, and zwitterionic) denature alpha-lactalbumin (alphaLA), making alphaLA an excellent model system to compare their denaturation mechanisms. This involves at least two steps in all surfactants but is more complex in charged surfactants due to their strong binding properties. At very low concentrations, charged surfactants bind specifically as monomers, but the first denaturation process only sets in when 4-10 surfactant molecules are bound to form clusters on the protein surface and is followed by a second loss of structure as 20-25 surfactant molecules are bound. Sub-micellar interactions can be modeled as simple independent binding at multiple sites which does not achieve saturation before micelle formation sets in. In contrast, no specific sub-micellar surfactant binding is detected by calorimetry in the presence of zwitterionic and non-ionic surfactants, and denaturation only occurs around the cmc. Unfolding rates are very rapid in charged surfactants and reach a similar plateau level around the cmc, indicating that monomers and micelles operate on a mutually exclusive basis. In contrast, unfolding occurs slowly in zwitterionic and non-ionic surfactants and the rate increases with the cmc, suggesting that monomers cooperate with micelles in denaturation.     

Mixed micellar properties of cationic trimeric-type quaternary ammonium salts and anionic sodium n-octyl sulfate surfactants

The properties of quaternary ammonium salt-type cationic trimeric surfactants (m-2-m-2-m, m represents the carbon atom number in alkyl chain lengths of 8, 10, and 12) and oppositely charged anionic monomeric surfactant, sodium n-octyl sulfate (SOS), were characterized by employing several techniques such as static surface tension, fluorescence spectroscopy, and dynamic light-scattering measurements. The critical micelle concentrations (cmc) of m-2-m-2-m were much lower than those of the corresponding dimeric and monomeric surfactants, and decreased with increasing chain length. The addition of SOS to m-2-m-2-m solutions resulted in a further decrease of the cmc. The mixed surfactants showed higher efficiencies in lowering the surface tension than the individual surfactants. The fluorescence measurements suggested the formation of mixed micelles with a hydrophobic environment in the solutions even at lower concentrations. The dynamic light-scattering study indicated the presence of two different kinds of aggregates with different hydrodynamic diameters. The larger one was attributed to the mixed micelle of m-2-m-2-m and SOS. These results indicated a decline of the electrostatic repulsion between cationic head groups through the incorporation of anionic surfactant into the mixed surfactants.     

短碳链醇/水混合溶剂中表面活性剂的表面性质

对不同类型表面活性剂(阳离子型、阴离子型、非离子型、正负混合型)在短碳链醇/水混合溶剂中的表面物化性质进行了较为系统的研究,探讨了短碳链醇加入对体系Υcmc值和cmc值的影响。发现各类体系的Υcmc随短碳链醇加入的变化规律并非决定于表面活性剂类型而取决于该表面活性剂在水溶液中的饱和吸附量和Υcmc值的大小。     

阴、阳离子表面活性剂混合体系在硅胶/水及硅胶/矿化水界面上的吸附

研究阴、阳离子表面活性剂混合体系(十二烷基氯代吡啶,辛基磺酸钠,辛基三乙基溴化铵/十二烷基苯磺酸钠)在硅胶,纯水和硅胶,矿化水界面上的吸附作用,探讨阴(阳)离子表面活性剂的存在对阳(阴)离子表面活性剂吸附作用的影响．结果表明,阴离子表面活性剂的存在基本不影响阳离子表面活性剂在带负电固体表面的吸附;而阳离子表面活性剂的存在却使本来吸附量就不大的阴离子表面活性剂在带负电的固体表面上不再吸附．在矿化水中阳离子表面活性剂的吸附量比在纯水中明显降低．从硅胶表面吸附机制解释了所得结果．     

Surfactant polymer interactions between strongly interacting cationic surfactants and anionic polyelectrolytes from conductivity and turbidity measurements

The interactions between oppositely charged surfactant/polymer mixtures have been studied using conductivity and turbidity measurements. The dependence of aggregation phenomenon on the chain length and head group modifications of conventional cationic surfactants, i.e., hexadecyl- (HTAB), tetradecyl- (TTAB), and dodecyltrimethylammonium bromides (DTAB) and dimeric cationic surfactants, i.e., decyl- (DeDGB) and dodecyldimethylgemini bromides (DDGB), is investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolytes at critical aggregation concentration (cac). The cac values are considerably lower than the critical micelle concentration (cmc) values for the same surfactant. After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in aqueous polyelectrolyte than in pure water. Among the conventional and dimeric cationic surfactants, DTAB and DeDGB, respectively, have been found to have least interactions with oppositely charged polyelectrolytes.     

Effect of a nonionic surfactant on Trichoderma cellulase treatments of regenerated cellulose and cotton yarns

It has been shown that some surfactants affect the hydrolysis of cellulose by cellulase. In this study, the effect of the surfactant Tween 20 on the hydrolysis of different cellulosic fibers was investigated and related to the cellulose fiber structure. It was found that this non-ionic surfactant enhanced the enzymatic saccharification of highly crystalline cellulosics such as Avicel, Tencel and cotton but not of cuprammonium rayon. The enhanced saccha-rification effected by the surfactant is attributed to inhibition of non-productive sorption of the endoglucanase of the cellulose surface which gives greater access to the cellulose chain ends by the exoglucanase. Although all three fibers lost tensile strength as a result of the enzymatic treatment, no further decrease was effected by the presence of the surfactant.     

支链化甜菜碱和阳离子表面活性剂在聚甲基丙烯酸甲酯表面的吸附及其润湿性质

利用座滴法研究了两性离子表面活性剂支链十六烷基(聚氧乙烯)_n醚羟丙基羧酸甜菜碱(n = 0, 3)和阳离子表面活性剂支链十六烷基(聚氧乙烯)_n醚羟丙基季铵盐溶液在聚甲基丙烯酸甲酯(PMMA)表面上的润湿性质,考察了表面活性剂类型、结构及浓度对接触角的影响趋势。研究发现,表面活性剂浓度低于临界胶束浓度(cmc)时,分子通过氢键以平躺的方式吸附到PMMA界面,亲水基团靠近固体界面, PMMA表面被轻微疏水化;表面张力和粘附张力同时降低,导致此阶段接触角随浓度变化不大。浓度高于cmc时,表面活性剂通过疏水作用吸附,亲水基团在外, PMMA表面被明显亲水改性,接触角随浓度升高显著降低。由于具有相同的支链烷基,表面活性剂类型变化和聚氧乙烯基团的引入对接触角影响不大。     

Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium

The interactions between oppositely charged surfactant-polymer systems have been studied using surface tension and conductivity measurements and the dependence of aggregation phenomenon over the polyelectrolyte concentration and chain length of cationic ATAB surfactants, cetyltrimethyl ammonium bromide (CTAB), tetradecyltrimethyl ammonium bromide (TTAB), and dodecyltrimethyl ammonium bromide (DTAB) have been investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolyte at critical aggregation concentration (cac). The cac values of ATAB surfactants in the presence of anionic polyelectrolyte, sodium carboxy methyl cellulose (NaCMC), are considerably lower than their critical micelle concentration (cmc). After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in polyelectrolyte aqueous solution than in pure water. Among the cationic surfactants (i.e., CTAB, TTAB, and DTAB), DTAB was found to have least interaction with NaCMC. Surfactants with longer tail size strongly favor the interaction, indicating the dependence of aggregation phenomenon on the structure, morphology, and tail length of the surfactant.      

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (1): Thermodynamic Study

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in aqueous solution were investigated by surface tension and ¹H NMR measurements. It was shown that the critical micelle concentration (cmc) increased linearly with the increase of β‐CD concentration. Furthermore, β‐CD formed 1∶1 inclusion complex with both cationic and anionic surfactants in the mixed surfactant systems, and no significant selective inclusion was observed. The thermodynamic parameters of the inclusion process of β‐CD to mixed cationic‐anionic surfactants were calculated by a numerical method based on the surface tension measurements, and it was found that the inclusion process was both enthalpy and entropy favorable.     

Self-aggregation of cationic surfactants onto oxidized cellulose fibers and coadsorption of organic compounds

In this work, the adsorption of cationic surfactant and organic solutes on oxidized cellulose fibers bearing different amounts of carboxylic moieties was investigated. The increase in the amount of -COOH groups on cellulose fibers by TEMPO oxidation induced a general rise in surfactant adsorption. For all tested conditions, that is, cellulose oxidation level and surfactant alkyl chain length (C12 and C16), adsorption isotherms displayed a typical three-region shape with inversion of the substrate zeta-potential which was interpreted as reflecting surfactant adsorption and aggregation (admicelles and hemimicelles) on cellulose fibers. The addition of organic solutes in surfactant/cellulose systems induced a decrease in surfactant cac on the cellulose surface thus favoring surfactant aggregation and the formation of mixed surfactant/solute assemblies. Adsorption isotherms of organic solutes on cellulose in surfactant/cellulose/solute systems showed that solute adsorption is strictly correlated to (i) the surfactant concentration, solute adsorption increases up to the surfactant cmc, where solute partitioning between the cellulose surface and free micelles causes a drop in adsorption, and to (ii) solute solubility and functional groups. The specific shape of solutes adsorption isotherms at a fixed surfactant concentration was interpreted using a Frumkin adsorption isotherm, thus suggesting that solute uptake on cellulose fibers is a coadsorption and not a partitioning process. Results presented in this study were compared with those obtained in a previous work investigating solute adsorption in anionic surfactant/cationized cellulose systems to better understand the role of surfactant/solute interactions in the coadsorption process.     

乙二亚甲基-双（十六烷基二甲基溴化铵）稀水溶液的特性

合成并表征了阳离子Gemini表面活性剂乙二亚甲基-α,β-双（十六烷基二甲基溴化铵）（16-2-16）.用表面张力和粘度法确定了其cmc，通过表面张力曲线计算了16-2-16的表面吸附量、吸附分子面积和胶束形成自由能；并用悬滴法测定了16-2-16在空气表面和十二烷界面的动态表（界）面张力.用改进的Washburn方法测定16-2-16水溶液在硅胶粉末表面的接触角，并进一步讨论了16-2-16在硅胶表面的吸附引起的润湿性变化. 探讨润湿性变化与动态张力的关系. 将16-2-16 与溴代十六烷基三甲胺(CTAB)做比较:两种物质在含油硅胶粉末上引起的最高脱油率（实验室模拟驱油）均发生在cmc附近,但16-2-16的最高脱油率是68％， CTAB的是63％.而所用CTAB的cmc比16-2-16的约大50倍,也就是说用16-2-16可以获得更高的脱油率.     

Interaction between bovine serum albumin and equimolarly mixed cationic-anionic surfactants decyltriethylammonium bromide-sodium decyl sulfonate

The interactions of bovine serum albumin (BSA) with the anionic surfactant sodium decylsulfonate (C10SO3), the cationic surfactant decyltriethylammonium bromide (C10NE) and equimolarly mixed cationic-anionic surfactants C10NE-C10SO3 were investigated by surface tension, viscosity, dynamic light scattering (DLS) and circular dichroism (CD). It was shown that the single ionic surfactant C10SO3 or C10NE has obvious interaction with BSA. The presence of C10SO3 or C10NE modified BSA structure. However, the equimolarly mixed cationic-anionic surfactants C10NE-C10SO3 showed very weak interactions with BSA. The surface tension-log concentration (gamma-logC) plot for the aqueous solutions of C10NE-C10SO3/BSA mixtures coincided with that of C10NE-C10SO3 solutions. Viscometry showed that there is no significant change in the rheological properties for the C10NE-C10SO3/BSA mixed solutions. DLS showed that BSA monomers and mixed aggregates of C10NE-C10SO3 existed in the C10NE-C10SO3/BSA mixed solutions. From CD spectra no obvious modification of BSA structure in the presence of C10NE-C10SO3 mixtures was observed. The weak interactions between BSA and C10NE-C10SO3 might be explained in terms of the very low critical micelle concentration (cmc) of C10NE-C10SO3 mixtures that made the concentration of ionic surfactant monomers much lower than that needed for inducing the modification of BSA structure. In other words, the very strong synergism between oppositely charged cationic and anionic surfactants makes the formation of cationic-anionic surfactant mixed aggregates in the bulk solution a more favorable process than binding to proteins.     

Use of surfactants to remove water-based inks from plastic film: effect of calcium ion concentration and length of surfactant hydrophobe

Effective plastic film deinking could permit the reuse of recycled polymer to produce clear film, reduce solid waste for landfills, reduce raw material demand for polymer production, and aid process economics. In this study, the deinking of a commercial polyethylene film printed with water-based ink was studied using surfactants in the presence of hardness ions (calcium ions) at various pH levels. The electrostatic properties of ink particles in a washing bath were also investigated. Synthetic anionic surfactant or fatty acid soap in the presence of calcium ions at alkaline pH levels was found to be nearly as effective at deinking as cationic, nonionic, or amphoteric surfactants alone. However, adding calcium ions decreases the deinking effectiveness of cationic, nonionic, and amphoteric surfactants. Increasing the length of the ionic surfactant hydrophobe enhances deinking. Zeta potential measurements showed that water-based ink particles in water reach the point of zero charge (PZC) at a pH of about 3.6, above which ink particles are negatively charged, so cationic surfactant tends to adsorb better on the ink than anionic surfactant above the PZC in the absence of calcium. As the cationic surfactant concentration is varied between 0.005 and 25 mM, the zeta potential of the ink particles reverses from negative to positive owing to adsorption of cationic surfactant. For anionic surfactants, added calcium probably forms a bridge between the negatively charged ink and the negatively charged surfactant head groups, which synergizes adsorption of the surfactant and aids deinking. In contrast, calcium competes for adsorption sites with cationic and nonionic surfactants, which inhibits deinking. All the surfactants studied here disperse ink particles effectively in the washing bath above pH 3 except for the ethoxylated amine surfactant.     

A review on experimental studies of surfactant adsorption at the hydrophilic solid-water interface

The progresses of understanding of the surfactant adsorption at the hydrophilic solid-liquid interface from extensive experimental studies are reviewed here. In this respect the kinetic and equilibrium studies involves anionic, cationic, non-ionic and mixed surfactants at the solid surface from the solution. Kinetics and equilibrium adsorption of surfactants at the solid-liquid interface depend on the nature of surfactants and the nature of the solid surface. Studies have been reported on adsorption kinetics at the solid-liquid interface primarily on the adsorption of non-ionic surfactant on silica and limited studies on cationic surfactant on silica and anionic surfactant on cotton and cellulose. The typical isotherm of surfactants in general, can be subdivided into four regions. Four-regime isotherm was mainly observed for adsorption of ionic surfactant on oppositely charged solid surface and adsorption of non-ionic surfactant on silica surface. Region IV of the adsorption isotherm is commonly a plateau region above the CMC, it may also show a maximum above the CMC. Isotherms of four different regions are discussed in detail. Influences of different parameters such as molecular structure, temperature, salt concentration that are very important in surfactant adsorption are reviewed here. Atomic force microscopy study of different surfactants show the self-assembly and mechanism of adsorption at the solid-liquid interface. Adsorption behaviour and mechanism of different mixed surfactant systems such as anionic-cationic, anionic-non-ionic and cationic-non-ionic are reviewed. Mixture of surface-active materials can show synergistic interactions, which can be manifested as enhanced surface activity, spreading, foaming, detergency and many other phenomena.     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the solid-solution interface

The adsorption of surface-active protein hydrophobin, HFBII, and HFBII/surfactant mixtures at the solid-solution interface has been studied by neutron reflectivity, NR. At the hydrophilic silicon surface, HFBII adsorbs reversibly in the form of a bilayer at the interface. HFBII adsorption dominates the coadsorption of HFBII with cationic and anionic surfactants hexadecyltrimethyl ammonium bromide, CTAB, and sodium dodecyl sulfate, SDS, at concentrations below the critical micellar concentration, cmc, of conventional cosurfactants. For surfactant concentrations above the cmc, HFBII/surfactant solution complex formation dominates and there is little HFBII adsorption. Above the cmc, CTAB replaces HFBII at the interface, but for SDS, there is no affinity for the anionic silicon surface hence there is no resultant adsorption. HFBII adsorbs onto a hydrophobic surface (established by an octadecyl trimethyl silane, OTS, layer on silicon) irreversibly as a monolayer, similar to what is observed at the air-water interface but with a different orientation at the interface. Below the cmc, SDS and CTAB have little impact upon the adsorbed layer of HFBII. For concentrations above the cmc, conventional surfactants (CTAB and SDS) displace most of the HFBII at the interface. For nonionic surfactant C(12)E(6), the pattern of adsorption is slightly different, and although some coadsorption at the interface takes place, C(12)E(6) has little impact on the HFBII adsorption.     

Phase behavior in mixtures of cationic and anionic surfactants in aqueous solutions

Phase behavior of cationic/anionic surfactant mixtures of the same chain length (n=10, 12 or 14) strongly depends on the molar ratio and actual concentration of the surfactants. Precipitation of catanionic surfactant and mixed micelles formation are observed over the concentration range investigated. Coacervate and liquid crystals are found to coexist in the transition region from crystalline catanionic surfactant to mixed micelles.The addition of oppositely charged surfactant diminishes the surface charge density at the mixed micelle/solution interface and enhances the apparent degree of counterion dissociation from mixed micelles. Cationic surfactants have a greater tendency to be incorporated in mixed micelles than anionic ones.     

Interaction of surfactants and aminoindophenol dye

The interaction of dye and surfactants was studied by their spectroscopic and surface properties. Large bathochromic shift (15 nm) in the absorption spectrum was found for aminoindophenol dye at high pH in cationic surfactant, while there is no significant shift in anionic, zwitterionic and nonionic surfactant solutions. The static and dynamic surface properties show there is strong interaction in mixture of cationic surfactant and aminoindophenol dye. Interaction of dye and surfactants on surface and in solution is correlated to the intensity of dye deposition on fiber. The charge complex formation between cationic surfactant and aminoindophenolic dye delays the dye diffusion into keratin fiber. The stronger is the dye/surfactant interaction, the lower dye deposition and diffusion become.