云南褐煤CO／H2O超临界萃取产物结构分析

对云南先锋褐煤ＣＯ／Ｈ２Ｏ超临界萃取产物进行了元素分析、平均分子量测定和Ｈ－ＮＭＲ、ＦＴＩＲ分析。结果表明，萃取物具有较小的结构单元和较高的杂原子含量，主要由芳环数为２－５，并具有烷基和酚羟基取代度２８－４６％的取代芳香结构组成。对正已烷可溶物柱色谱烷烃馏分和芳烃馏分进行了ＧＣ／ＭＳ分析，在烷烃馏分中检测出一系列烯烃存在，表明在萃取过程中有裂解反就 发生；芳烃馏分以基萘和烷基四氢萘为主要成分，取代     

超临界流体萃取对大气飘尘中有机污染物的分析

采用超临界流体萃取与气相色谱／质谱联用技术对兰州市大气飘尘中有机污染物进行了测定。实验考察了对强致癌性化合物多环芳烃类萃取的最佳条件,在２６．０ＭＰａ,８０℃下,０．５ｍＬ甲醇做改性剂,用ＣＯ２作为超临界萃取介质,静态萃取１０ｍｉｎ后再以０．５ｍＬ／ｍｉｎ的流速动态萃取３０ｍｉｎ,对实际样品进行了定性定量分析,共检测出６９种有机污染物,该方法简便,快速,适合于飘尘中有机污染物的测定。     

离线超临界流体萃取和气相色谱／质谱联用对实验室内空气中气相有机？…

通过固体吸附富集，再用超临界ＣＯ２脱附后用气相色谱及质谱技术对实验室内空气中气相有机污染物进行了考察，文中对采样和萃取条件进行了优化，并与热脱附所得结果做了比较，结果表明在２２ＭＰａ，８０℃时，用甲醇改性的超临界ＣＯ２进行萃取的结果优于热脱附法，该法鉴定出气相有机污染物中５２个组分，占色谱峰总面积的９９．６％。     

超临界流体萃取-气相色谱法测定水果和蔬菜中有机磷农药残留量

报道了一种用超临界流体萃取水果蔬菜中多种残留有机磷的方法。样品与硅藻土混合后用超临界ＣＯ２ 提取（萃取压力为３０ＭＰａ,温度为５０℃）,乙酸乙酯收集。２ ｇ 样品农药残留回收率为８２％ ～１０８％ ,相对标准偏差为４．６％ ～１１％ （ｎ＝ ６）。测定了西红柿、草莓、金桔和柠檬等样品。测得的结果与传统方法一致,本方法快速、准确。     

超临界流体萃取—气相色谱法测定水果和疏菜中有机磷农药残留量

报道了一种用超临界流体认萃取水果疏菜中多种残留有机磷的方法。样品与硅藻土混合后用超临界ＣＯ２提取（萃取压力为３０ＭＰａ,温度为５０℃）,乙酸乙酯收集。２ｇ样品浓药残留农药残留回收率为８２％～１０８％,相对标准偏差为４．６％～１１％（ｎ＝６）。测定了西红柿、草莓、金桔和柠蒙等样品。测得的结果与传统方法一致,本方法快速、准确。     

离线超临界流体萃取和气相色谱/质谱联用对实验室内空气中气相有机污染物的测试

通过团体吸附剂富集，再用超临界ＣＯ２脱附后用气相色谱及质谱技术对实验室内空气中气相有机污染物进行了考察。文中对采样和萃取条件进行了优化，并与热脱附所得结果做了比较。结果表明在２２ＭＰａ，８０℃时，用甲醇改性的超临界ＣＯ２进行萃取的结果优于热脱附法。该法鉴定出气相有机污染物中５２个组分，占色谱峰总面积的９９．６％。     

墨红花超临界二氧化碳香味萃取成分的色谱－质谱法测定

由墨红花提取的精油或油树脂是优质的天然香料，被广泛用于化妆品和食品工业。超临界ＣＯ２萃取墨红花精油，既可保持很好的香气，又能克服传统的有机溶剂萃取时有残余溶剂的缺点。用气相色谱－质谱联用法对超临界ＣＯ２萃取物与石油醚萃取物中的组成进行了分析比较。色谱条件为：ＯＶ－１０１固定相，氦气，０．２ｍｍ×５０ｍ石英毛细管柱，柱温７０℃２ｍｉｎ，然后以５℃／ｍｉｎ程序升温至２５０℃。超临界萃取条件为５０℃，２１ＭＰａ，ＣＯ２流量为１０ｍＬ。发现超临界萃取物中的成分包括了石油醚萃取物中的多数主要香味成分，但对香味影响较小的、分子量较大的烷烃和烯烃的含量较少。超临界二氧化碳萃取物的香气与鲜花相近。     

环境模拟样品中多环芳烃的超临界流体萃取I．利用正交设计选择最佳萃取条件

采用正交设计实验方法，研究了从环境模拟样品中超临界流体萃取（ＳＦＥ）多环芳烃（ＰＡＨ）的最佳萃取条件。着重考察了超临界流体的压力、温度和用量等对萃取效率的影响。结果表明，压力的影响居第一位，温度影响次之，超临界ＣＯ２的用量的影响居第三位。建立了选择超临界流体萃取条件的简单方法     

焦炉降尘中多环芳烃的毛细管超临界流体色谱分析

研究了９个多环芳烃混合样品的超临界流体色谱分析条件，并与毛细管气相色谱法做了比较。超临界流体色谱的条件是：柱温１１０℃；程序升压９．０ＭＰａ（５ｍｉｎ）１．４ＭＰａ／ｍｉｎ２８．０ ＭＰａ。各组分保留时间的相对标准偏差为 １．４％～３．０％，定量分析的相对误差为１．４％～６．０％，比毛细管气相色谱法具有明显的优越性。试验了焦炉降尘样品，发现该样品主要由双环和三环的多环芳烃类物质组成。其中萘含量约占８０％。     

墨红花超临界二氧化碳香味萃取成分的色谱－质谱法测定

 由墨红花提取的精油或油树脂是优质的天然香料，被广泛用于化妆品和食品工业。超临界ＣＯ２萃取墨红花精油，既可保持很好的香气，又能克服传统的有机溶剂萃取时有残余溶剂的缺点。用气相色谱－质谱联用法对超临界ＣＯ２萃取物与石油醚萃取物中的组成进行了分析比较。色谱条件为：ＯＶ－１０１固定相，氦气，０．２ｍｍ×５０ｍ石英毛细管柱，柱温７０℃２ｍｉｎ，然后以５℃／ｍｉｎ程序升温至２５０℃。超临界萃取条件为５０℃，２１ＭＰａ，ＣＯ２流量为１０ｍＬ。     

对氨基酚络合萃取机理的探讨

对氨基酚络合萃取机理的探讨;对氨基酚; 络合萃取; 萃取机理; 萃取反应热     

Focused microwave aqueous extraction of chlorophenols from solid matrices and their analysis by chromatographic techniques

Open-vessel focused microwave (FMW) extraction with a purely aqueous carbonate solution was used for the extraction of chlorophenols from various solid matrices. After SPE on C18-bonded silica, the analytes were determined as such by LC-UV or, as their acetyl derivatives, by GC-ECD. The FMW aqueous extraction is efficient and rapid and no organic solvents are used. PCP was detected in several solid samples, with recoveries of 101-115% (RSD, 2-4%) relative to Soxhlet extraction. Similar recoveries were obtained for the other chlorophenols for spiked samples.     

超声辅助液液萃取法提取烟用香精成分的研究

采用超声辅助液液萃取法(ULLE)提取某品牌烟用香精成分,GC-MS对其进行分析,研究了不同萃取剂、萃取时间和萃取温度对分析结果的影响,初步确定了最佳条件为:以二氯甲烷为萃取剂,饱和NaCl溶液作水相,室温下超声萃取5 min.又分别与同时蒸馏萃取法(SDE)和传统的液液萃取法(LLE)作以比较,对ULLE法和SDE法鉴定出的化学成分、重现性和定量值进行了对比.结果表明:超声辅助液液萃取具有操作简便、快速、节能、萃取效率高、重现性好等特点,适合于烟用香精成分的提取.     

杂粮中总黄酮的提取及含量测定的实验设计

通过学生分组，采用溶剂提取法，超声提取法和微波提取法等提取方法，测定了小米、糜子、青稞、荞麦和高梁等杂粮中黄酮含量，结果表明5种杂粮中，青稞中总黄酮的含量最高。该综合实验能够锻炼大学生运用所学实验技术解决实际问题的能力，适合作为高年级本科综合实验项目开设。     

中草药化学成分提取新技术

介绍五种提取新技术棗微波萃取技术、超临界二氧化碳萃取技术、超声波提取技术、半仿生提取技术和酶法的原理和特点,以及这些新技术近年来在中草药化学成分提取工艺中的研究应用现状,并展望了它们的应用前景。     

Improved extraction and clean-up of imidazolinone herbicides from soil solutions using different solid-phase sorbents

Extraction and quantification of herbicide residues from soil are important in understanding the behaviour of persistent herbicides. This research investigated extraction and clean-up methods for imidazolinone herbicides from soil and soil amended with organic material. A series of solvent mixes, pH conditions and sorbents was tested. Across three imidazolinone herbicides: imazapyr, imazethapyr and imazaquin, 0.5 M NaOH extraction gave greater than 90% recovery from soil samples; however, 0.5 M NaOH:MeOH (80:20) resulted in higher recovery for imazaquin, but not for the other two herbicides. Of the sorbents tested, the use of chromatographic mode sequencing using C₁₈ and SCX sorbents provided consistent high (>85%) recovery of all three herbicides from soil and separation of the herbicides from other soil components by high performance liquid chromatography (HPLC). These two methods will allow high recovery of these imidazolinone herbicides from soil and have the ability to detect these herbicides without interference from other soil components.     

Supercritical fluid extraction

Supercritical fluid extraction (SFE) provides for the first time a viable option to conventional and widely used Soxhlet extraction. The ability to change the solvating power of a single supercritical fluid by changing its density is an exceedingly attractive feature. An environmentally safe alternative such as supercritical carbon dioxide to organochlorine solvents which are widely used today in many government and industrial analytical laboratories for sample preparation is desirable. SFE may also constitute a viable alternative to other popular sample preparation techniques such as liquid-liquid extraction, solid phase extraction and purge/trap. Much research, however, must be done in order to understand, optimize and apply this technology. For example, (a) automation of extraction, (b) matrix effects, (c) new fluids/modifiers/additives, (d) trapping efficiency, (e) recovery of extracted analytes, and (f) extraction kinetics are some areas which need a greater understanding. This review is concerned with many of these topics as they relate to trace organic analysis wherein SFE is the primary sample preparation technique.     

Comparison of alternative and conventional extraction techniques for the determination of zearalenone in corn

Naturally contaminated corn samples of different origin were extracted using two conventional techniques (blending and shaking) and three alternative approaches (ultrasonic extraction, accelerated solvent extraction, and microwave-assisted extraction). Use of the same extraction mixture for all trials enabled the efficiency of the various extraction techniques to be compared. Extracts were filtered and directly analyzed by LC–ESI–MS, without further clean-up. The yield from the alternative extraction techniques showed efficiency to be higher than for conventional techniques. In particular, microwave-assisted extraction was slightly superior to other techniques.     

A Unified Sample Preparation System for Extraction of Various Analyte/Matrix Combinations

A supercritical fluid extraction/enhanced solvent extraction system (SFE/ESE) was used to remove polar and non-polar analytes from various matrices. Extraction of environmental pollutants from soil, additives from low density polyethylene, sulfa drugs from animal tissue, and drug from tablet was performed using both SFE and ESE. Results showed that a single instrumental system can be used to perform both ESE with organic solvents and SFE with carbon dioxide-based fluids. Each method has its own unique advantages and applications. The ability to carry out both solvent extraction and supercritical fluid extraction with one system has obvious economical advantages.     

Effect of Ultrasound-Assisted,Microwave-Assisted and Ultrasound-Microwave-Assisted Extraction on Pectin Extraction from Industrial Tomato Waste

This work aimed to study the effect of ultrasound-assisted (UAE), microwave-assisted (MAE), and ultrasound-microwave-assisted (UMAE) methods for pectin extraction from industrial tomato waste. The overall performance index from the fuzzy analytical method with three criteria, pectin yield, galacturonic acid, and lycopene content, was applied to evaluate the best extraction conditions by using the weight of 75, 20, and 5, respectively. The UAE conditions was performed at a temperature of 80 °C for 20 min with the variations in the extraction pH and the solid liquid (SL) ratio. The best UAE conditions with high pectin yield, and high total carboxyl group, as well as a lycopene content, was the pH of 1.5 and the SL ratio of 1:30. The MAE conditions was performed with variations in the microwave powers and times. The results showed that the best MAE conditions were 300 W for 10 min, which gave high pectin yield with high galacturonic acid and lycopene content. Various conditions of UMAE at the best conditions of MAE and UAE were performed and exhibited that the UAE had more positively affected the pectin yield. However, the FTIR spectra of obtained pectins from different extraction techniques showed a similar pectin structure.