Studying the Temperature Dependence of Thermal Conductivity in a Rock of Combined Composition

A model for the structure of a rock as a heterogeneous system of two components, amorphous and crystalline, is considered. A formula is proposed for calculating the thermal conductivity of rocks with different temperature dependences of the thermal conductivity of their components. When the temperature dependence of the thermal conductivity of the components and their volume fractions is known, the thermal conductivity of the actual rock can be predicted for different combinations of amorphous and crystalline phases.     

空间光学遥感器大功率控制电箱的热设计

根据空间应用电子设备的热控要求,对空间光学遥感器的控制电箱进行了热控设计。首先,总结了空间电子设备的热设计原则。针对空间光学遥感器控制电箱介绍了相应的热设计流程,对典型的大功率器件进行了温差推算,并说明了电箱的各电路板和大功率元器件的热设计方案。最后,通过热分析和热试验手段对热控电箱的热控方案进行了验证。试验结果表明：控制电箱的整机稳态工况热平衡温度小于30℃,各元器件的最高壳温在54.2℃以内。结果验证了该设计方案完全满足设计指标要求。     

EAST超导托卡马克冷屏结构与受力分析

EAST是一个全超导磁体系统的托卡马克实验装置,超导纵场和极向场磁体工作在4K温区下。在磁 体和其它发热部件之间布置有冷屏系统,以减少作用到所有低温冷质部件上的热载,将其保持在最低水平。该系 统包括真空室冷屏(内冷屏)和外真空杜瓦冷屏(外冷屏)两部分。在分析了冷屏低温运行时所受热应力以及等离 子体破裂时所受电磁载荷的基础上,运用大型有限元分析程序NASTRAN,对其不同载荷状况进行了数值计算,为其 结构设计与优化提供了理论依据。     

高能激光系统内光路热效应建模与仿真

高能激光系统内光路热效应是影响系统性能的重要因素,介绍了内光路中光学元件、介质气体热效应物理模型,分析了影响热效应的主要因素,并开展了热效应变化规律研究。针对光学元件,重点研究了元件吸收率、元件材料特性、光斑分布对反射镜、窗口镜、分光镜热像差的影响规律,指出吸收率主要影响热像差的大小,而元件基底材料特性和激光分布影响热像差时间和空间变化。针对介质气体,指出介质气体升温后重力引起的自然对流是影响气体热像差的主要物理因素,细致研究了热像差随时间的变化规律,介绍了降低封闭与开放式内光路介质气体热像差的措施与方法。介绍了激光仿真软件平台Easylaser多物理仿真模块,搭建了包含反射镜、窗口镜、分光镜和介质气体的内光路计算模型,通过光-热-力-控多物理耦合仿真,研究了反射镜与窗口镜、介质气体与窗口镜热像差补偿效应,给出了激光传输远场光斑特征,表明了Easylaser的多物理仿真模块具备对内光路热效应综合仿真分析能力。     

空间光学遥感器控制器机电热一体化设计

根据空间电子设备机电热一体化设计思想,设计了高分辨率空间光学遥感器的控制器,以验证一体化设计的优势和效果。概括了空间电子设备的一体化设计流程。针对空间光学遥感器控制器的研制提出了相应的一体化设计原则。说明了控制器的各电路板和大功率元器件的设计方案。通过热、力学仿真分析和试验手段对设计方案进行了验证。结果表明:控制器元器件的最高壳温在51℃以内,整机的前三阶模态均高于100Hz。设计方案完全满足热控、刚度等设计指标要求。     

混合磁体超导线圈低温传输线冷屏的设计与分析

对于低温传输线,冷屏是其重要的结构。文中在低温传输线冷屏结构初步设计的基础上,对冷屏屏体材料进行比选,计算分析了低温传输线在80K温区的漏热量,并采用Solidworks软件,对不同厚度的低温传输线冷屏的温度分布进行模拟分析,完成冷屏的工程设计。     

星载激光雷达滤波器组件热分析及参数优化

为了有效提高星载激光雷达后继光学系统中滤波器组件结构热保温性能,保证其核心部件F-P标准具利用材料的热光特性进行中心波长调谐的精度,对滤波器组件进行了初步热结构设计。利用有限元软件Ansys Workbench对滤波器组件初始结构进行稳态热分析,确定加热功率范围,再对热结构中的关键参数进行基于灵敏度分析的多目标优化,并确定各参数的最优值。优化分析结果表明:标准具达到稳态设计工作温度48℃时,加热功率为7.05 W,节省功率消耗11.3%,标准具表面节点最大温差由原来的0.253℃减少为0.05℃,满足设计技术指标要求。     

LIPS-200离子推力器热特性模拟分析研究

为了对20cm口径LIPS-200环形会切磁场离子推力器的热设计研究提出优化建议,利用LIPS-200离子推力器内部放电能量沉积数学模型计算结果开展推力器的稳态和瞬态热分析,并进行热平衡试验加以验证。结果显示:当推力器处于稳态工作时,其内部磁钢的温度分布是影响推力器热设计的关键因素,而通过提高推力器内外部件的表面发射率,可以使内部关键部件温度降低50～60℃,相关热平衡试验验证结果与仿真分析结果基本吻合。     

空间相机电控机箱的热设计及仿真分析

为了保证空间相机电控机箱在轨运行期间的工作温度满足使用要求,根据电控机箱的结构特点和导热路径,对电控机箱内部大功耗电子元器件进行了详细热控设计,解决了某些电子元器件发热量大、导热路径较长的问题。以某个典型元器件为例,进行了散热效果估算。最后应用有限元分析软件IDEAS-TMG建立了详细的电控机箱热分析有限元模型,根据电控机箱所处温度边界条件进行了稳态仿真分析,给出了电控机箱整体的热响应性能、印制线路板（PCB）及板上大功耗电子元器件的稳态温度分布云图,结果显示,PCB的温度为40.6～51.1℃,板上大功耗电子元器件的结温为46.3～62.5℃,均满足热控设计的指标要求。热分析结果表明电控机箱热设计合理可行,能够满足使用要求。     

Proof-of-Principle Experiment of the Pseudorandom Multiplexing of White-Pump Light for Spectral Photothermal Microscopy

Absorption spectroscopy, coupled with photothermal super-resolution microscopy, is enabled by the frequency division multiplexing of the pump-light (Pu) wavelength whose spectral component is discriminated by the modulation frequency. This demonstrates a great advantage in availing multicolor image information. However, the response gain of the thermal lens signal to the spectral components is not uniform because of the limited relaxation rate of the thermal lens, i.e., the gains of the components assigned to the high-frequency modulations are diminished, thus resulting in a distorted absorption spectrum. In this study, white-pump light (Pu) is multiplexed by pseudonoise sequences (PNSs) to avoid the distortion. The frequency bandwidth of the PNSs is equalized, and the gains of the thermal lens generation to the respective wavelength components are balanced. The obtained results indicate that the modulation-waveform deformation due to the slow responses of the sample can also distort spectra. To mitigate the problem, the countermeasures required to compensate for this distortion are also discussed.     

Three-dimensional analysis for transient coupled thermoelastic response of a functionally graded rectangular plate

The generalized coupled thermoelasticity based on the Lord-Shulman theory is considered to study the transient thermoelastic response of functionally graded rectangular plates. The state equations of functionally graded rectangular plate subjected to time-dependent thermal loads were established by using of state space approach, in which three displacement components, three stress components, the temperature and the heat flux were chosen as state variables. By giving simply supported boundary conditions and assuming that the material properties of the plate have an exponential law distribution along the thickness-coordinate, the equations were solved by the numerical Laplace transformations and shooting methods for transient thermal responses of a three dimensional functionally graded rectangular plate due to a thermal shock on its top surface. Effects of the volume fraction distributions of material constituents on the thermal responses, including the temperature change, the displacement and the stresses distributions were investigated.     

ITER极向场馈线系统冷屏初步设计

ITER极向场馈线系统采用冷屏以降低4K温区低温部件的热负荷。该文对极向场馈线冷屏的初步设计进行介绍,并计算了冷屏的热负荷。     

宽谱热光偏振态的统计描述

本文从宽谱热光光振动在垂直于光波传播方向的平面内的两个正交分量联合统计性质出发,导出偏振度概念,给出该两个正交分量在各种偏振态下的联合概率密度函数,从而全面描述了宽谱热光的偏振现象。 关键词：     

高温超导直接冷却的氮化铝与无氧铜接触界面热阻的实验研究

氮化铝(AlN)具有高热导性、高电绝缘性,是超导二元电流引线热截流结构中常用的材料之一。根据稳态导热法建立低温真空实验装置,实验研究了超导冷却系统热截流结构中,界面温度和接触压力对AlN块材与无氧铜(OFHC-Cu)块材间接触界面热阻的影响。在实验温度(90K-210K)和压力(0.273MPa-0.985MPa)条件下,AlN/OFHC-Cu接触界面热阻随接触压力的提高而降低,而当界面温度上升时界面热阻由于热载子热运动的强化而降低,温度较高时,接触界面热阻随压力变化的速率趋缓。低温下AlN/OFHC-Cu间的接触界面热阻是直接冷却超导系统的设计和超导系统的热稳定性方面必需解决的问题。     

环状连续强激光下光学薄膜的瞬温和热畸变

详细研究了非冷却光学薄膜元件在环形激光光束辐照下的瞬态温度分布和随后的热畸变，并且用泰曼干涉仪实际测量了连续波氧碘激光辐照各种非冷却光学元件的热畸变量并与理论计算相比较，分析结果表明理论和实验相一致。     

燃油液滴蒸发的一维导热模型与压力效应

考虑液滴内一维瞬态导热以及液滴,气流热物性随温度与组分的变化,建立了对流热环境中燃油液滴的蒸发计算模型.以柴油液滴为例,通过数值模拟,分析了蒸发过程中液滴内部的瞬态热响应,考察了不同条件下的环境压力效应.结果表明,对流蒸发过程中,燃油液滴内部温度梯度很大,导热作用明显;在温度不同的气流环境中,环境压力效应存在非单调性;压力效应发生转捩的气流温度与液滴初始粒径和气流速度相关.     

ITER第一壁铍铜连接部件在高热负荷作用下的热性能分析

对ITER屏蔽包层第一壁板铍铜连接件在高热负荷作用下的传热性能进行了分析,模拟了第一壁铍铜连接手指部件的热应力和热应变,得到其对应的热疲劳寿命.计算结果表明,在局部4.7MW?m-2高热负荷作用和ITER水冷条件下,现有设计方案中的铍铜连接件的热性能和热疲劳性能均满足设计要求.     

Definition of effective coefficients of thermal conductivity in spatially reinforced composites on the basis of energy criterion of equivalence

The models of thermal conductivity in fibrous spatially reinforced medium were developed at overall anisotropy of components; the approach is based on equality between dissipation in equivalent material and the considered composite. The calculated values of effective coefficients of thermal conductivity for two cases (unidirectional and cross-loaded) composites were compared with experimental data. Agreement between calculated and experimental data is satisfactory. It was demonstrated that developed models give the upper and lower estimates for effective coefficients of thermal conductivity in fibrous compositions.     

Calculation of thermal stresses in profiled single crystals taking into account the temperature dependence of thermal expansion

Approximate expressions for stress tensor components in cylindrical and ribbon crystals are obtained taking into account the temperature dependence of the thermal expansion coefficient. These expressions are used for estimating the effect of the thermal expansion nonlinearity factor on the stress level. It is shown that the stresses emerging in linear temperature fields due to this factor are comparable with critical stresses for defect formation.     

Thermal expansion of SOFC materials

A short overview is given for the thermal expansion of solid oxide fuel cell materials. The thermomechanical compatibility of state-of-the-art materials is compared with alternative, new materials. With these alternatives a better adjustment of the thermal expansion coefficients of the various fuel cell components is possible and fuel cells based on the newly developed materials are proposed.