Determination of colorimetric uncertainties in the spectrophotometric measurement of colour

A method for the determination of colorimetric uncertainties has been developed in order to meet the requirements for accreditation by the UK accreditation service (UKAS), which include a statement of uncertainty for all certified quantities. The values of the principal sources of spectrophotometric uncertainty are first determined and are used to calculate corresponding components of colorimetric uncertainty using a simple model. The components of uncertainty analysed are 100% level (diffuse reflectance), photometric non-linearity, dark level and wavelength error. Bandwidth error is not significant for NPL surface colour standards because a small bandwidth is always used.

The gloss trap error and specular beam error are determined and corrected so that only the uncertainties after correction need be considered. These can be treated as components of dark level uncertainty. The uncertainties are determined for the following colour data: x, y, Y, u′, v′, L^*, a^* and b^* for the CIE 10° Standard Observer and the CIE Standard Illuminant D₆₅ for three geometries: specular included, specular excluded and 0°/45°. These are now quoted routinely on NPL certificates for ceramic colour standards, white and black ceramic tile standards and Russian opal standards.     

Thermal stability of an explosive detonator

Mercuric 5-nitrotetrazole is a possible replacement for lead azide. The thermal decomposition peak maximum ranged from 185 to 270°C as the heating rate increased from 0.1 to 100°C min⁻¹. The activation energy and frequency factor for thermal decomposition were determined from dynamic and isothermal DSC and isothermal TG data; the average values were 38.8 kcal mol⁻¹ and 3.56×10¹⁴ s⁻¹. A half-life experiment confirmed the kinetic constants and indicated that the decomposition reaction was first order. The heat of explosion was determined by a pressure DSC test and found to be 2587 J g⁻¹. The linear coefficient of expansion was 37±2×10⁻⁶°C⁻¹ from −60 to 160°C and indicated secondary transitions near −10 and 90°C. The specific heat was 0.0003154T+0.1339 in the region −40–90°C. The critical temperature for a slab with a half-thickness of 0.035 cm was calculated to be 232 °C.     

Monodentate and bidentate trifluoroacetato ligands in bis(trifluoroacetato)-(N-methyl-meso-tetraphenylporphyrinato)thallium(III)—a new dynamic 4:3 piano stool seven-coordinate geometry

The crystal structure of bis(trifluoroacetato)-(N-methyl-meso-tetraphenylporphyrinato) thallium(III), Tl(N---Me---tpp)(CF₃CO₂)₂ (2), was established and the coordination sphere around the Tl³⁺ ion is described as 4:3 tetragonal base–trigonal base piano stool seven-coordinate geometry in which the two cis CF₃CO₂ ⁻ groups occupy two apical sites. The plane of the three pyrrole nitrogen atoms [i.e. N(2), N(3) and N(4)] strongly bonded to Tl³⁺ is adopted as the reference plane 3N. The pyrrole N(1) ring bearing the methyl group [i.e. C(45)H₃] is the most deviated one from the 3N plane making a dihedral angle of 23.3° whereas smaller angles of 9.9, 2.7 and 4.7° occur with pyrroles N(2), N(3), and N(4), respectively. Because of the larger size of the thallium(III) ion, Tl is considerably out of the 3N plane; its displacement of 1.02 Å is in the same direction as that of the two apical CF₃CO₂ ⁻ ligands. The intermolecular trifluoroacetate exchange process for 2 in CD₂Cl₂ solvent is examined through ¹⁹F and ¹³C NMR temperature-dependent measurements. In the slow-exchange region, the CF₃ and carbonyl (CO) carbons of the CF₃CO₂ ⁻ groups in 2 are separately located at δ 114.3 [¹J(C–F)=290 Hz, ³J(Tl–C)=411 Hz] and 155.1 [²J(C–F)=37 Hz, ²J(Tl–C)=204 Hz], respectively, at −106 °C. In the same slow-exchange region, the fluorine atoms of 2, Tl(N---Me---tpp)(CF₃CO₂)⁺ and the free CF₃CO₂ ⁻ are located at δ −73.76 [⁴J(Tl–F)=44 Hz], −73.30 [⁴J(Tl–F)=22 Hz], and −76.15 ppm at −97 °C, respectively.     

Structure cristalline et conformation en solution aqueuse de la carnosine (β-alanyl-L-histidine)

Carnosine (β-alanyl-L-histidine) is a biologically active molecule involved in muscular metabolism. It crystallises in the C; space group with a = 24.725 Å b = 5,427 Å c = 8,004 Å β = 100,2° (Z = 4)

In the crystal, acid and basic groups are engaged in hydrogen bonds whose strength is evaluated through IR frequencies. Molecular conformation in the solid state is defined by τ₁ = /t-177° τ₂ = −38° φ = −96° ψ = +131° χ₁ = 181° χ₂₁ = 62°

NMR study of carnosine in aqueous solution indicates that rotation about CH₂-CH₂ is free and that the other angles take the following values: Ø −150° or −90° and X₁ = 165° or 315°. Infrared and Raman spectra suggest that τ₂ undergoes small changes when going from crystal to solution while ψ is close to +150°.     

Studies on organolanthanide complexes : LXIII. Synthesis, spectroscopic and X-ray crystallographic characterization of new early organolanthanide, organoyttrium hydride and organoholmium hydroxide complexes

Organolanthanide chloride complexes [(CH₃OCH₂CH₂C₅H₄)₂Ln(μ-Cl)]₂ (Ln = La, Pr, Ho and Y) react with excess NaH in THF at 45°C to give the dimeric hydride complexes [(CH₃OCH₂CH₂C₅H₄)₂Ln(μ-H)]₂, which have been characterized by IR, ¹H NMR, MS and XPS spectroscopy, elemental analyses and X-ray crystallography. [(CH₃OCH₂CH₂C₅H₄)₂Y(μ-H)]₂ crystallizes from THF/n-hexane at −30°C, in the triclinic space group P1 with a = 8.795(2) Å, b = 11.040(1) Å, c = 16.602(2) Å, = 93.73(1)°, β = 91.82(1)°, γ = 94.21(1)°, D_c = 1.393 gcm⁻³ for Z = 2 dimers. However, crystals of [(CH₃OCH₂CH₂C₅H₄)₂Ho(μ-OH)]₂ were obtained by recrystallization of holmium hydride in THF/n-hexane at −30°C, in the orthorhombic space group Pbca with a = 11.217(2) Å, b = 15.865(7) Å, c = 17.608(4) Å, D_c = 1.816 gcm⁻³ for Z = 4 dimers. In the complexes of yttrium and holmium, each Ln atom of the dimers is coordinated by two substituted cyclopentadienyl ligands, one oxygen atom and two hydrogen atoms (for the Y atom) or two hydroxyl groups (for the Ho atom) to form a distorted trigonal bipyramid if the C(η⁵)-bonded cyclopentadienyl is regarded as occupying a single polyhedral vertex.     

Incoherent scattering of 59.54 keV gamma rays for some rare earth elements at low photon momentum transfers

Incoherent scattering functions S(x, Z) for six rare earth elements were evaluated from accurately measured whole atom differential incoherent scattering cross sections for 59.54 keV γ-rays scattered at 30°, 45°, 60° and 90° scattering angles corresponding to 1.24, 1.84, 2.40 and 3.39 Å⁻¹ photon momentum transfers. Our results for S(x, Z) are the first for these rare earth elements.     

Structures of propionaldehyde, butyraldehyde, and pivalaldehyde complexes of the chiral rhenium fragment [(η-C5H5)Re(NO)(PPh3)]

The crystal structures of propionaldehyde complex (RS,SR)-(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHCH₂CH₃)]⁺ PF₆⁻ (1b⁺ PF₆^s−; monoclinic, P2₁/c (No. 14), a = 10.166 (1) Å, b = 18.316(1) Å, c = 14.872(2) Å, β = 100.51(1)°, Z = 4) and butyraldehyde complex (RS,SR)-[(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHCH₂CH₂CH₃)]⁺ PF₆⁻ (1c⁺PF₆⁻; monoclinic, P2₁/a (No. 14), a = 14.851(1) Å, b = 18.623(3) Å, c = 10.026(2) Å, β = 102.95(1)°, Z = 4) have been determined at 22°C and −125°C, respectively. These exhibit C O bond lengths (1.35(1), 1.338(5) Å) that are intermediate between those of propionaldehyde (1.209(4) Å) and 1-propanol (1.41 Å). Other geometric features are analyzed. Reaction of [(η⁵-C₅H₅)Re(NO)(PPh₃)(ClCH₂Cl)]⁺ BF₄⁻ and pivalaldehyde gives [(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHC(CH₃)₃)]⁺BF₄⁻ (81%), the spectroscopic properties of which establish a π C O binding mode.     

Measurement of surface orientation in uniaxial poly(ethylene terephthalate) films using polarised specular reflectance Fourier transform infrared microscopy

Polarised Fourier transform infrared (FT-IR) external-reflection spectroscopy has been used to measure molecular orientation at the surface of uniaxially drawn poly(ethylene terephthalate) (PET) films as a function of draw ratio. The spectra, which were obtained using an FT-IR microscope operating in the reflectance mode, were of high signal-to-noise (S/N) ratio, and contained only the specular component of the reflected radiation. The dichroic ratio of the 1019 cm⁻¹ ring stretching band was used to measure the PET orientation function, P₂₀₀. Prior to quantifying band intensities, the reflectance spectra were either transformed using the Kramers-Kronig algorithm, or simply differentiated; it was found that the dichroic ratios obtained using either pretreatment were similar. It was shown that the P₂₀₀ values obtained using the FT-IR method compared well with those obtained using surface refractive index measurements, provided that the intensity of the 1019 cm⁻¹ band was normalised relative to a non-dichroic band in the spectrum prior to computing dichroic ratios. The use of a reflecting microscope to perform the analysis of surface orientation not only simplifies sample alignment compared with “macro” reflectance accessories, but also allows awkward-shaped or small samples to be examined with relative ease. Unfortunately, a significant current limitation is that samples must be sufficiently “optically thick” to prevent double-pass (“transflectance”) radiation reaching the detector and yielding non-specular features in the reflectance spectrum. For polyaromatics, this probably means thicknesses in excess of 50 μm to obtain good spectra in the fingerprint region. Polarised attenuated total reflectance microscopy may present an alternate approach for examining thinner films.     

Hydrothermal syntheses and crystal structures of bimetallic cluster complexes [{Cd(phen)2}2V4O12]·5H2O and [Ni(phen)3]2[V4O12]·17.5H2O

The hydrothermal reactions of vanadium oxide starting materials with divalent transition metal cations in the presence of nitrogen donor chelating ligands yield the bimetallic cluster complexes with the formulae [{Cd(phen₂)₂V₄O₁₂]·5H₂O (1) and [Ni(phen)₃]₂[V₄O₁₂]·17.5H₂O (2). Crystal data: C₄₈H₅₂Cd₂N₈O₂₂V₄ (1), triclinic. a=10.3366(10), b=11.320(3), c=13.268(3) Å, =103.888(17)°, β=92.256(15)°, γ=107.444(14)°, Z=1; C₇₂H₁₃₁N₁₂Ni₂O_29.5V₄ (2), triclinic. a=12.305(3), b=13.172(6), c=15.133(4), =79.05(3)°, β=76.09(2)°, γ=74.66(3)°, Z=1. Data were collected on a Siemens P4 four-circle diffractometer at 293 K in the range 1.59° <θ<26.02° and 2.01°<θ<25.01° using the ω-scan technique, respectively. The structure of 1 consists of a [V₄O₁₂]⁴⁻ cluster covalently attached to two {Cd(phen)₂}²⁺ fragments, in which the [V₄O₁₂]⁴⁻ cluster adopts a chair-like configuration. In the structure of 2, the [V₄O₁₂]⁴⁻ cluster is isolated. And the complex formed a layer structure via hydrogen bonds between the [V₄O₁₂]⁴⁻ unit and crystallization water molecules.     

Equilibrium and structural studies of silicon(IV) and aluminium(III) in aqueous solution—10. A potentiometric study of aluminium(III) pyrocatecholates and aluminium(III) hydroxo pyrocatecholates in 0.6 M Na(Cl)

Equilibria between aluminium(III), pyrocatechol (1,2-dihydroxybenzene, H₂L) and OH⁻ were studied in 0.6 M Na(Cl) medium at 25°C. The measurements were performed as emf titrations (glass electrode) within the limits 1.5 ≤ − log[H⁺] ≤ 9; 0.0005 ≤ B ≤ 0.015 M; 0.006 ≤ C ≤ 0.03 M and 2 ≤ C/B ≤ 30 (B and C stand for the total concentrations of aluminium(III) and pyrocatechol respectively). All data can be explained with a main series of complexes: A1L⁺, log β_−2,1,1 = − 6.337 ± 0.005; A1L₂⁻, log β_−4,1,2 = −15.44 ± 0.017 and A1L₃³⁻, log β_−6,1,3 = − 28.62 ± 0.024 together with two minor species: Al(OH)L₂²⁻, log β_−5,1,2 = − 23.45 ± 0.079 and Al₃(OH)₃L₃, log β_−9,3,3 = − 29.91 ± 0.066. Of the two, the latter probably is a type of average composition complex principally occurring at low C/B quotients. The first acidity constant for pyrocatechol as determined in separate experiments is log β_−1,0,1 = − 9.198 ± 0.001. The standard deviations given are 3σ(log β p,q,r). Data were analyzed with the least squares computer program LETAGROPVRID. In a model calculation using kaolinite as solid phase, we compared the complexation ability of this system with that of the system Al³⁺-OH⁻-salicylic acid, reported earlier in this series.     

Structure and conformational properties of carbonylbisimidosulfuryl fluoride, O=C(N=S(O)F2)2

The molecular structure and conformational properties of O=C(N=S(O)F₂)₂ (carbonylbisimidosulfuryl fluoride) were determined by gas electron diffraction (GED) and quantumchemical calculations (HF/3-21G* and B3LYP/6-31G*). The analysis of the GED intensities resulted in a mixture of 76(12)% syn–syn and 24(12)% syn–anti conformer (ΔH⁰=H⁰(syn–anti)−H⁰(syn–syn)=1.11(32) kcal mol⁻¹) which is in agreement with the interpretation of the IR spectra (68(5)% syn–syn and 32(5)% syn–anti, ΔH⁰=0.87(11) kcal mol⁻¹). syn and anti describe the orientation of the S=N bonds relative to the C=O bond. In both conformers the S=O bonds of the two N=S(O)F₂ groups are trans to the C–N bonds. According to the theoretical calculations, structures with cis orientation of an S=O bond with respect to a C–N bond do not correspond to minima on the energy hyperface. The HF/3-21G* approximation predicts preference of the syn–anti structure (ΔE=−0.11 kcal mol⁻¹) and the B3LYP/6-31G* method results in an energy difference (ΔE=1.85 kcal mol⁻¹) which is slightly larger than the experimental values. The following geometric parameters for the O=C(N=S)₂ skeleton were derived (r_a values with 3σ uncertainties): C=O 1.193 (9) Å, C–N 1.365 (9) Å, S=N 1.466 (5) Å, O=C–N 125.1 (6)° and C–N=S 125.3 (10)°. The geometric parameters are reproduced satisfactorily by the HF/3-21G* approximation, except for the C–N=S angle which is too large by ca. 6°. The B3LYP method predicts all bonds to be too long by 0.02–0.05 Å and the C–N=S angle to be too small by ca. 4°.     

Vapor-liquid equilibria for the system water + tert.-pentanol at 4 temperatures

Precise isothermal vapor-liquid equilibrium data at 10, 30, 55 and 70°C for the system water + tert.-pentanol were measured using a computer-operated differential static apparatus. Activity coefficients at infinite dilution were derived from the experimental P − x data in the dilute region using a flexible Legendre polynomial, and the vapor-liquid-liquid locus was derived directly from the P − x data near the liquid-liquid phase boundary. Heteroazeotropic points were measured directly by distillation using a rotating band column. Furthermore the UNIQUAC and the NRTL models were used to correlate the experimental P − x data and to derive the azeotropic data.

Experimental H^E data were taken from literature and used together with the experimental P − x data to simultaneously fit temperature dependent interaction parameters for UNIQUAC and NRTL. The parameters were used to predict the azeotropic composition over a large temperature range. The results were compared with those of a simple analytical thermodynamic equation using only the pure component vapor pressure data, heats of mixing in the heterogeneous region and the azeotropic composition at one temperature.

Heats of mixing were measured at 140°C with the help of a flow calorimeter in order to determine the slope of H^E vs. x₁ in the heterogeneous region. The H^E data were used to check the reliability of the G^E model parameters and the equation to calculate the temperature dependence of the heteroazeotropic composition.     

Conformational stability of 1-pentyne from temperature dependent FT-IR spectra of liquid rare gas solutions and ab initio calculations

Variable temperature studies of the infrared spectra (3500–400 cm⁻¹) of 1-pentyne, CH₃CH₂CH₂CCH, dissolved in liquid xenon (−55 to −100°C) and liquid krypton (−105 to −150°C) have been recorded. These data indicate that the anti (methyl group trans to the acetylenic group) and gauche conformers have relative concentrations that vary with the temperature, i.e. enthalpy nonzero. Utilizing seven sets of conformer pairs for the xenon solution and ten sets of conformer pairs for the krypton solution, the enthalpy difference has been determined to be 50±6 cm⁻¹ (0.60±0.07 kJ/mol) and 45±4 cm⁻¹ (0.54±0.05 kJ/mol), respectively, with the anti conformer the more stable form. Because of two equivalent gauche forms, this conformer is estimated to be in higher abundance at 61±1% in the xenon solution and 62±1% in the krypton solution. Optimized geometries and conformational stabilities have been obtained from ab initio calculations with basis sets 6-31G(d), 6-311+G(d,p), 6-311+G(2d,2p) and 6-311+G(2df,2pd) with full electron correlation by the perturbation method to second order (MP2). All of the calculations predict the gauche rotamer to be the more stable form with a high value of 181 cm⁻¹ from the MP2/6-311+G(d,p) calculations and a low value of 107 cm⁻¹ from the MP2/6-311+G(2d,2p) calculation. The r_o adjusted structural parameters have been obtained from a combination of the microwave rotational constants and ab initio predicted parameters. The values are compared to the recently reported values from an electron diffraction study where the value for the CC bond distance appears to be too long. The results are discussed and the conformational stability is compared to those obtained for some similar molecules.     

On the vibrational spectra and conformational stability of 1,1-dimethylhydrazine from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

Variable temperature (−105 to −150 °C) studies of the infrared spectra (3500–400 cm⁻¹) of 1,1-dimethylhydrazine, (CH₃)₂NNH₂, in liquid krypton have been carried out. No convincing spectral evidence could be found for the trans conformer which is expected to be at least 600 cm⁻¹ less stable than the gauche form. The structural parameters, dipole moments, conformational stability, vibrational frequencies, and infrared and Raman intensities have been predicted from MP2/6-31G(d) ab initio calculations. The predicted infrared and Raman spectra are compared to the experimental ones. The adjusted r₀ parameters from MP2/6-311+G(d,p) calculations are compared to those reported from an electron diffraction study. The energy differences between the gauche and trans conformers have been obtained from MP2 ab initio calculations as well as from density functional theory by the B3LYP method calculations from a variety of basis sets. All of these calculations indicate an energy difference of 650–900 cm⁻¹ with the B3LYP calculations predicted the larger values. The potential function governing the conformational interchange has been predicting from both types of calculations and comparisons have been made. The barrier to internal rotation by the independent rotor model of the inner methyl group is predicted to have a value of 1812 cm⁻¹ and that of the outer one of 1662 cm⁻¹ from ab initio MP2/6-31G(d) calculations. These values agree well with the experimentally determined values of 1852±16 and 1558±12 cm⁻¹, respectively, from a fit of the torsional transitions with the coupled rotor model. For the coupled rotor model the predicted V′₃₃ (sin 3τ₀ sin 3τ₁ term) value which ranged from 190 to 232 cm⁻¹ is in reasonable agreement with the experimental value of 268±3 cm⁻¹ but the predicted V₃₃ (cos 3τ₀ cos 3τ₁ term) value of −73 to −139 cm⁻¹ is 25% smaller and of the opposite sign of the experimental value of 333±22 cm⁻¹. These theoretical and spectroscopy results are compared to similar quantities of some corresponding molecules.     

Kinetic study of gas-phase Lu(D3/2) with O2, N2O and CO2

The second-order rate constants of gas-phase Lu(²D_3/2) with O₂, N₂O and CO₂ from 348 to 573 K are reported. In all cases, the reactions are relatively fast with small barriers. The disappearance rates are independent of total pressure indicating bimolecular abstraction processes. The bimolecular rate constants (in molecule⁻¹ cm³ s⁻¹) are described in Arrhenius form by k(O₂)=(2.3±0.4)×10⁻¹⁰exp(−3.1±0.7 kJmol⁻¹/RT), k(N₂O)=(2.2±0.4)×10⁻¹⁰exp(−7.1±0.8 kJmol⁻¹/RT), k(CO₂)=(2.0±0.6)×10⁻¹⁰exp(−7.6±1.3 kJmol⁻¹/RT), where the uncertainties are ±2σ.     

Structural and theoretical studies of Xe(OChF5)2 and [XeOChF5][AsF6] (Ch = Se, Te)

The XeOSeF₅⁺ cation has been synthesized for the first time and characterized in solution by ¹⁹F, ⁷⁷Se and ¹²⁹Xe NMR spectroscopy and in the solid state by X-ray crystallography and Raman spectroscopy with AsF₆⁻ as its counter anion. The X-ray crystal structures of the tellurium analogue and of the Xe(OChF₅)₂ derivatives have also been determined: [XeOChF₅][AsF₆] crystallize in tetragonal systems, P4/n, a=6.1356(1) Å, c=13.8232(2) Å, V=520.383(14) Å³, Z=2 and R₁=0.0453 at −60°C (Te) and a=6.1195(7) Å, c=13.0315(2) Å, V=488.01(8) Å³, Z=2 and R₁=0.0730 at −113°C (Se); Xe(OTeF₅)₂ crystallizes in a monoclinic system, P2₁/c, a=10.289(2) Å, b=9.605(2) Å, c=10.478(2) Å, β=106.599(4)°, V=992.3(3) Å³, Z=4 and R₁=0.0680 at −127°C; Xe(OSeF₅)₂ crystallizes in a triclinic system, , a=8.3859(6) Å, c=12.0355(13) Å, V=732.98(11) Å³, Z=3 and R₁=0.0504 at −45°C. The energy minimized geometries and vibrational frequencies of the XeOChF₅⁺ cations and Xe(OChF₅)₂ were calculated using density functional theory, allowing for definitive assignments of their experimental vibrational spectra.     

Isothermal kinetic analysis of the thermal decomposition of magnesium hydroxide using thermogravimetric data

In the present study, the kinetics of the thermal decomposition of magnesium hydroxide is investigated, using isothermal methods of kinetic analysis. For this purpose, experiments in thermogravimetric analyser were carried out in standard values of temperature (350°, 400°, 450° and 500°C) which resulted in weight loss percent as a function of time. The data were further modified to give fraction reacted ‘' versus time to be tested in various forms of ‘' functions. In order to determine the mechanism of the magnesium hydroxide decomposition and the form of the conversion function which governs the dehydroxylation of Mg(OH)₂, four different methods of isothermal kinetic analysis were used. Applying each of these methods to the data, it was concluded that the nucleation mechanism predominates the Mg(OH)₂, decomposition for all values of temperature tested; at 350°C the kinetic model which represents the experimental data is that of reaction at phase boundaries (random nucleation), F₁: ln(1−)=kt) while for the higher temperatures 400°, 450° and 500°C the kinetic equation of nucleation and development in two dimensions, A₂: [−ln (1−)]^1/2=kt was found to fit better the experimental results. The activation energy was evaluated applying two alternative methods; the Arrhenius plot, using maximum rates of reaction, from which the activation energy was evaluated to be 20.54 kcal/mol. An alternative method based on plots of ln t versus 1/T corresponding to the same value of ‘' gave values of 10.72, 13.82 and 16.31 kcal/mol for ‘' values of 0.25, 0.50 and 0.75, respectively.     

Determination of pK(a)'s for thymol blue in aqueous medium: evidence of dimer formation

Formation constants for recrystallized thymol blue were determined in water, using the SQUAD and SUPERQUAD programs. The best model correlating spectrophotometric, potentiometric and conductimetric data was fitted with the dissociation of HL⁻=L²⁻+H⁺−log K=8.918±0.070 and H₃L₂⁻=2L²⁻+3H⁺−log K=29.806±0.133 with the SUPERQUAD program at variable low ionic strength (1.5×10⁻⁴–3.0×10⁻⁴ M); and HL=L²⁻+H⁺−log K=8.9±0.000, H₃L₂⁻ =2L²⁻+3H⁺−log K=30.730±0.032, H₄L₂=2L²⁻+4H⁺−log K=32.106±0.033 with SQUAD at 1.1 M ionic strength.     

Capillary electrophoresis for measuring major and trace anions in thermal water and condensed-steam samples from hydrothermal springs and fumaroles

A new application of capillary electrophoresis for measuring major and trace anions in thermal water and condensed-steam samples is presented. Ten fluid samples were collected from hydrothermal springs and fumaroles located in a volcanic zone of Deception Island, Antarctica. Anion separation was achieved in less than 6 min using indirect UV detection at 254 nm with a negative power supply (−15 kV). The electrolyte consisted of 4.7 mM sodium chromate, 4.0 mM electroosmotic flow modifier (OFM) hydroxide, 10 mM 2-(N-cyclohexylamino)ethanesulfonic acid and 0.1 mM calcium gluconate (pH 9.1). Major anions (Cl⁻, SO₄², PO₄H²⁻, and CO₃H⁻) were measured using hydrostatic injection (10 cm for 30 s) at 25°C. Trace amounts of anions (F⁻, Br⁻, and NO₃⁻) were better determined by electromigration injection (4 kV, 10 s) at 15°C. Good reproducibility of the migration times (<0.72% RSD), a satisfactory linear response and accuracy as well as acceptable detection limits were successfully obtained.     

X-ray diffraction study of the smectic mesophase of some azobenzene-containing polyacrylates

An X-ray study is performed on powder specimens and on stretched oriented fibres of two liquid crystalline polyacrylates containing the azobenzene mesogenic unit with either a 4'-n-pentyloxy (sample 1-4) or 4'-n-hexyloxy (sample 1-5) substituent. The X-ray diffraction patterns of both samples showed the presence of a bilayer smectic C mesophase with the mesogneic groups tilted by an angle β ∼ 45° (1-4) or β ∼ 38° (1-5) with respect to the layer normal. The electron density profile p(z) along the direction normal to the smectic layers was calculated by Fourier inversion and possible structural models of the smectic mesophase are discussed. A partial interdigitation of the terminal alkyloxy substituents appears to occur.