Crystal Structures of {[Cd(phen)](C6H8O4)3/3} and {[Cd(phen)](C7H10O4)3/3} · 2H2O with C6H10O4 = Adipic Acid and C7H12O4 = Pimelic Acid

Two coordination polymers {[Cd(phen)](C₆H₈O₄)_3/3} ( 1 ) and {[Cd(phen)](C₇H₁₀O₄)_3/3} · 2H₂O ( 2 ) were structurally characterized by single crystal X‐ray diffraction methods. In 1 (C2/c (no. 15), a = 16.169(2)Å, b = 15.485(2)Å, c = 14.044(2)Å, β = 112.701(8)°, U = 3243.9(7)ų, Z = 8), the Cd atoms are coordinated by two N atoms of one phen ligand and five O atoms of three adipato ligands to form mono‐capped trigonal prisms with d(Cd‐O) = 2.271‐2.583Å and d(Cd‐N) = 2.309, 2.390Å. The [Cd(phen)] moieties are bridged by adipato ligands to generate {[Cd(phen)](C₆H₈O₄)_3/3} chains, which, via interchain π—π stacking interactions, are assembled into layers. Complex 2 (P1¯(no. 2), a = 9.986(1)Å, b = 10.230(3)Å, c = 11.243(1)Å, α = 66.06(1)°, β = 87.20(1)°, γ = 66.71(1)°, U = 955.7(2)ų, Z = 2) consists of {[Cd(phen)](C₇H₁₀O₄)_3/3} chains and hydrogen bonded H₂O molecules. The Cd atoms are pentagonal bipyramidally coordinated by two N atoms of one phen ligand and five O atoms of three pimelato ligands with d(Cd‐O) = 2.213—2.721Å and d(Cd‐N) = 2.329, 2.372Å. Through interchain π—π stacking interactions, the {[Cd(phen)](C₇H₁₀O₄)_3/3} chains resulting from [Cd(phen)] moieties bridged by pimelato ligands are assembled in to layers, between which the hydrogen bonded H₂O molecules are sandwiched.     

LuF[SeO3] und LuCl[SeO3]: Zwei nicht‐isotype Halogenid‐Oxoselenate(IV) des Lutetiums

LuF[SeO₃] and LuCl[SeO₃]: Two Non‐Isotypic Halide Oxoselenates(IV) of Lutetium Despite the formal similarity of LuF[SeO₃] and LuCl[SeO₃] both compounds show significant structural differences due to the different positions of the halide anions (X⁻) within the pentagonal bipyramids [LuO₅X₂]⁹⁻. However, both oxoselenates(IV) have these pentagonal bipyramids as basic modules in common that are connected via O²⁻ edges to chains. LuCl[SeO₃] crystallizes orthorhombically in space group Pnma (no. 62; a = 714.63(7), b = 681.76(7) and c = 864.05(9) pm; Z = 4). The structure is isotypic to that one recently presented for ErCl[SeO₃]. With a single Cl⁻ anion in each an apical and an equatorial position, the chains have to be inclined with an angle of about 54° relative to each other to get connected alternately by common Cl⁻ corners and bridging [SeO₃]²⁻ pyramids. In contrast to that, LuF[SeO₃] which crystallizes triclinically in space group (no. 2; a = 644.85(6), b = 684.41(7), c = 427.98(4) pm, α = 94.063(5), β = 96.484(5) and γ = 91.895(5)°; Z = 2) takes a structural motif already known from CsTmCl₂[SeO₃]. Owing to the apical position of both halide anions it is now possible to connect the chains directly via discrete Ψ¹‐tetrahedral [SeO₃]²⁻ groups to layers. The same layers are present in LuF[SeO₃] and without the formal alkali‐metal halide unit (CsCl) of the CsTmCl₂[SeO₃]‐type compounds, the layers can also be connected directly by common F⁻ corners to a three‐dimensional array. Torch‐sealed evacuated silica ampoules were used for the synthesis of both lutetium(III) halide oxoselenates(IV). For LuF[SeO₃] these vessels have been graphitized before to prevent them from oxosilicate‐producing side‐reactions with the applied fluoride. The synthesis of LuCl[SeO₃] required Lu₂O₃ and SeO₂ in a molar ratio of 1 : 6 with a surplus of an eutectic RbCl/LiCl mixture as fluxing agent and an annealing period of five weeks at a temperature of 500 °C, whereas Lu₂O₃, LuF₃ and SeO₂ (in a molar ratio of 1 : 1 : 3) with CsBr as flux were converted to LuF[SeO₃] at 750 °C within six days.     

Solvay type VCl3 isospecific catalysts

Solvay type S –VCl₃ catalyst has 7% of catalytically active vanadium sites ([C^*]) with k_p (rate constant of propagation) = 31 (M s)^?1 for ethylene polymerization. Addition of a comonomer, propylene of 4-methylpentene-1 (4-MP) significantly raised the ethylene polymerization activity. S –VCI₃ catalyst has very small amounts of catalytically active vanadium for propylene polymerizations: [C] = 0.19% with k_p,i = 857 (M s)^?1 and [C] = 0.45% with k_p,a = 23 (M s)^?1 for isospecific and nonspecific sites, respectively. Addition of a conomer, ethylene or 4-MP. lowered the propylene polymerization activity. S –VCI₃ is more easily reduced to the divalent ion by AIR₃ than S –TiCl₃. Methyl-p-toluate moderates the reducting power of AIR₃; it increase the productivity and stereoselectivity of the S –YiCl₃ catalyst, VCI₃ supported on MgCl₂ (CW–V catalyst) has enhanced rate constant of propylene polymerization but has the opposite effects on the S –TiCl₃ Catalyst. VCI₃ supported on MgCl₂ (CW–V catalyst) has enhances rate constant of propylene polymerization but only a minute fraction of the supported vanadiums are catalytically active: [C] = 0.019% and k_p,i = 1580 (Ms)^?1, [C] = 0.057% and k_p,i = 58 (M s)^?1. This is compared with far greater number of catalytically active titanium sites in the TiCl₃ supported on MgCl₂ catalyst: [C] = 6% and k_p,i = 200 (M s)^?1, [C] = 6% and k_p,a = 16(M s)^?1. Therefore, both the S –VCI₃ and CW–V catalysts are highly stereoselective but low in efficiency with respect to the utilization of the vanadium ion in the catalysis.     

The kinetics and the mechanism of the thermal gas-phase reaction between bis(trifluoromethyl)trioxide,CF3O3CF3 and 1,1-dichlorodifluoroethylene,CF2CCI2

The thermal addition of CF₃O₃CF₃(T) to CF₂CCl₂(E) has been investigated between 49.6 and 69.5°C. The initial pressure of CF₃O₃CF₃ was varied between 7 and 240 torr and that of CF₂CCl₂ between 4 and 600 torr. Four products of formula CF₃O(E)_j OOCF₃, where j = 1 → 4 are formed. The sum of the products Σ CF₃O(E)_jOOCF₃ is equal to the amount of trioxide decomposed. The reaction is homogeneous. Its rate is not affected by the total pressure and the presence of inert gas. It is a free radical telomerization with four basic steps: thermal decomposition of CF₃O₃CF₃ into CF₃O^. and CF₃O₂^., chain initiation by addition of CF₃O^. to olefin incorporated in, and telomeric radicals termination. The consumption of alkene is well represented by the equation: where (d[E]/d[T]) = is the mean chain length of telomerization. varies from 1.45 at 1.5 torr of E to 3.3 at 400 torr of E. Above this pressure E has no influence on . The estimated value of the constant for the addition of telomeric radicals to alkene is:      

Iodostannate mit polymeren Anionen: (Me3PhN)4 [Sn3I10], [Me2HN–(CH2)2–NMe2H]2 [Sn3I10] und [Me2HN–(CH2)2–NMe2H][Sn3I8]

Iodostannates with Polymeric Anions: (Me₃PhN)₄ [Sn₃I₁₀], [Me₂HN–(CH₂)₂–NMe₂H]₂ [Sn₃I₁₀], and [Me₂HN–(CH₂)₂–NMe₂H] [Sn₃I₈] The polymeric iodostannate anions in (Me₃PhN)₄ [Sn₃I₁₀] ( 1 ) and [Me₂HN–(CH₂)₂–NMe₂H]₂ [Sn₃I₁₀] ( 2 ) consist of Sn₃I₁₂‐trioctahedra, which share four common iodine atoms with adjacent units to form infinite layers in 1 and polymeric chains in 2 . In the anion of [Me₂HN–(CH₂)₂–NMe₂H] [Sn₃I₈] ( 3 ) distorted SnI₆ octahedra sharing common edges and vertices form a two‐dimensional network. (Me₃PhN)₄ [Sn₃I₁₀] ( 1 ): Space group C2/c (No. 15), a = 2406.9(2), b = 968.26(7), c = 2651.7(2) pm, β = 111.775(9), V = 5738.9(8) · 10⁶ pm³; [Me₂HN–(CH₂)₂–NMe₂H]₂ [Sn₃I₁₀] ( 2 ): Space group P2₁/n (No. 14), a = 1187.2(1), b = 1554.4(1), c = 1188.9(1) pm, β = 116.620(8), V = 1961.4(3) · 10⁶ pm³; [Me₂HN–(CH₂)₂–NMe₂H] [Sn₃I₈] ( 3 ): Space group P2₁/c (No. 14), a = 1098.9(2), b = 803.93(7), c = 1571.5(2) pm, β = 102.96(1), V = 1352.9(2) · 10⁶ pm³.     

Anionic copolymerizations of acrylonitrile with β-propiolactone

Anionic copolymerizations of acrylonitrile (monomer 1) with β-propiolactone (monomer 2) and the structures of the resulting copolymers were studied. The copolymerization with sodium cyanide in N,N-dimethylformamide gave copolymers of the structure I containing acid anhydride linkage in the molecular chains, with the monomer reactivity ratios, r₁ = 1.20, r₂ = 0.00. The copolymerization with potassium hydroxide gave either copolymers of the structure II (r₁ = 0.00, r₂ = 3.64 at 30°C; r₁ = 0.00, r₂ = 5.00 at 40°C) in N,N-dimethylformamide or only β-propiolactone homopolymer in toluene.      

Synthesis and Crystal Structure of Tricaesium Heptaphosphide–Ammonia(1/3) Cs3P7·3 NH3

Recrystallization of Cs₃P₇ from liquid NH₃ yields the triammoniate Cs₃P₇·3 NH₃, which loses the weakly bound NH₃ of crystallization below 253 K. A low-temperature crystal-structure analysis shows that Cs₃P₇· NH₃ consists of a framework of heptaphosphanortricyclane anions P and Cs⁺ cations with NH₃ molecules completing the coordination of the cations. The framework is built from Cs₃P₇ layers connected by only few Cs…?P interactions, the interlayer gap being filled by a two-dimensional network of NH₃. The Cs₇P₇ part of the structure completes a family of alkali-metal-polyphosphide substructures which range from [RbP₇]^2? or [CsP₁₁]^2? chains over [Cs₂P_n]^? layers (n = 7, 11) to now [Cs₃P₇] frameworks.     

Nd4N2Se3 und Tb4N2Se3: Zwei nicht‐isotype Lanthanoid(III)‐Nitridselenide

Nd₄N₂Se₃ and Tb₄N₂Se₃: Two non‐isotypical Lanthanide(III) Nitride Selenides The non‐isotypical nitride selenides M₄N₂Se₃ of neodymium (Nd₄N₂Se₃) and terbium (Tb₄N₂Se₃) are formed by the reaction of the respective rare‐earth metal with sodium azide (NaN₃), selenium and the corresponding rare‐earth tribromide (MBr₃) at 900 °C in evacuated silica ampoules after seven days. Each of them crystallizes monoclinically in the space group C2/c with Z = 4 for Nd₄N₂Se₃ (a = 1300.47(4), b = 1009.90(3), c = 643.33(2) pm, β = 90.039(2)°) and in the space group C2/m with Z = 2 for Tb₄N₂Se₃ (a = 1333.56(5), b = 394.30(2), c = 1034.37(4) pm, β = 130.377(2)°), respectively. The crystal structures differ fundamentally in the linkage of the structure dominating N^3‐ centred (M³⁺)₄ tetrahedra. In Nd₄N₂Se₃, the [NNd₄] units are edge‐linked to bitetrahedra which are cross‐connected to [N(Nd1)(Nd2)]³⁺ layers via their remaining four corners, whereas the [NTb₄] tetrahedra in Tb₄N₂Se₃ share cis‐oriented edges to form strands [N(Tb1)(Tb2)]³⁺. Both structures contain two crystallographically different M³⁺ cations, that show coordination numbers of six and seven (Nd₄N₂Se₃) or twice six (Tb₄N₂Se₃), respectively, relative to the anions (N^3‐ und Se^2‐). Each of the two independent kinds of Se^2‐ anions provide the three‐dimensional linkage as well as the charge balance. The particular axial ratio a/c and the monoclinic reflex angle offer two choices for fixing the unit cell of Tb₄N₂Se₃.     

Lithiumtriamidostannat(II), Li[Sn(NH2)3] – Synthese und Kristallstruktur

Lithium Triamidostannate(II), Li[Sn(NH₂)₃] – Synthesis and Crystal Structure Rusty-red glistening, transparent crystals of Li[Sn(NH₂)₃] were obtained by reaction of metallic lithium with tetraphenyl tin in liquid ammonia at 110 °C. The structure was determined from X-ray single-crystal diffractometer data: Space group P 2₁/n, Z = 4, a = 8.0419(9) Å, b = 7.1718(8) Å, c = 8.5085(7) Å, β = 90.763(8)°, R₁ (F _o ≥ 4σ(F _o)) = 2.8%, wR₂ (F ≥ 2σ(F )) = 5.3%, N(F ≥ 2σ(F )) = 1932, N(Var.) = 65. The crystal structure contains trigonal pyramidal complex anions [Sn(NH₂)₃]^– with tin at the apex, which are connected to layers of sequence A B A B … by lithium in tetrahedra-double units [Li(NH₂)_2/2(NH₂)₂]₂.     

The decomposition of dimethyl peroxide and the rate constant for CH3O + O2 → CH2O + HO2

The decomposition of dimethyl peroxide (DMP) was studied in the presence and absence of added NO₂ to determine rate constants k₁ and k₂ in the temperature range of 391–432°K: The results reconcile the studies by Takezaki and Takeuchi, Hanst and Calvert, and Batt and McCulloch, giving log k₁(sec^?1) = (15.7 ± 0.5) - (37.1 ± 0.9)/2.3 RT and k₂ ≈ 5 × 10⁴M^?1· sec^?1. The disproportionation/recombination ratio k_7b/k_7a = 0.30 ± 0.05 was also determined: When O₂ was added to DMP mixtures containing NO₂, relative rate constants k₁₂/k_7a were obtained over the temperature range of 396–442°K: A review of literature data produced k_7a = 10^9.8±0.5M^?1·sec^?1, giving log k₁₂(M^?1·sec^?1) = (8.5 ± 1.5) - (4.0 ± 2.8)/2.3 RT, where most of the uncertainty is due to the limited temperature range of the experiments.     

Polysila analogs of aromatic hydrocarbon ions: Structures and energies of Si3H3+, Si4H,and Si5H5−

Silicon analogs of aromatic monocyclic ions, (SiH) ( 4 ), (SiH) ( 5 ), and (SiH) ( 6 ) have been studied ab initio at MP 2(full)/6-31G *. The D_3h structure of Si₃H₃⁺ is the global minimum, whereas other two ions are nonplanar. The D_2d structure of (SiH) is less folded than the carbon analog and possesses a higher stabilization energy. Stabilization energies for the monocharged ions are diminished with respect to the corresponding carbons © 1993 John Wiley & Sons, Inc.     

The reactions of alkoxy radicals with O2. II. n-C3H7O radicals

n-C₃H₇ONO was photolyzed with 366 nm radiation at ?26, ?3, 23, 55, 88, and 120°C in a static system in the presence of NO, O₂, and N₂. The quantum yields of C₂H₅CHO, C₂H₅ONO, and CH₃CHO were measured as a function of reaction conditions. The primary photochemical act is and it proceeds with a quantum yield ?₁ = 0.38 ± 0.04 independent of temperature. The n-C₃H₇O radicals can react with NO by two routes The n-C₃H₇O radical can decompose via or react with O₂ via Values of k₄/k₂ ? k_4b/k₂ were determined to be (2.0 ± 0.2) × 10¹⁴, (3.1 ± 0.6) × 10¹⁴, and (1.4 ± 0.1) × 10¹⁵ molec/cm³ at 55, 88, and 120°C, respectively, at 150-torr total pressure of N₂. Values of k₆/k₂ were determined from ?26 to 88°C. They fit the Arrhenius expression: For k₂ ? 4.4 × 10^?11 cm³/s, k₆ becomes (2.9 ± 1.7) × 10^?13 exp{?(879 ± 117)/T} cm³/s. The reaction scheme also provides k_4b/k₆ = 1.58 × 10¹⁸ molec/cm³ at 120°C and k_8a/k₈ = 0.56 ± 0.24 independent of temperature, where      

Pr5F[SiO4]2[SeO3]3: Another Complex Fluoride Oxosilicate Oxoselenate(IV)

During attempts to synthesize lanthanoid(III) fluoride oxoselenates(IV) with the simple composition MF[SeO₃], not only Pr₃F[SeO₃]₄, but also Pr₅F[SiO₄]₂[SeO₃]₃ appeared as pale green crystalline by‐products in the case of praseodymium. Pr₅F[SiO₄]₂[SeO₃]₃ crystallizes triclinically in space group P$\bar{1}$ (no. 2) with a = 701.14(5), b = 982.68(7), c = 1286.79(9) pm, α = 70.552(3), β = 76.904(3), γ = 69.417(3)° and Z = 2. The five crystallographically different Pr³⁺ cations on the general positions 2i show coordination numbers of eight and nine. [(Pr1)O₈]^13– and [(Pr2)O₈]^13– polyhedra are connected to$\bar{1}$ {[(Pr1, 2)₂O₁₂]^18–} chains along the [100] direction. [(Pr3)O₇F]^12–, [(Pr4)O₈F]^14– and [(Pr4)O₈F]^14– polyhedra generate [F(Pr3, 4, 5)₃O₁₉]^30– units about their central F^– anion in triangular Pr³⁺ coordination. These units form $\bar{1}$ {[F(Pr3, 4, 5)₃O₁₆]^24–} strands, again running parallel to [100]. Their alternating connection with the $\bar{1}$ {[(Pr1, 2)₂O₁₂]^18–} chains results in $\bar{1}$ {[Pr₅O₂₀F]^26–} sheets parallel to the (001) plane. Like in the already known related compound Er₃F[SiO₄][SeO₃]₂, a three‐dimensional network $\bar{1}$ {[Pr₅O₁₇F]^20–} is achieved without the contribution of both the tetravalent silicon and selenium components. However, two Si⁴⁺ and three Se⁴⁺ cations forming tetrahedral [SiO₄]^4– and ψ¹‐tetrahedral [SeO₃]^2– units with all O^2– anions guarantee the charge balance. The formation of Pr₅F[SiO₄]₂[SeO₃]₃ was observed when praseodymium sesquioxide (Pr₂O₃: in‐situ produced from Pr and Pr₆O₁₁ in a molar ratio of ³/₁₁:⁴/₁₁),praseodymium trifluoride (PrF₃) and selenium dioxide (SeO₂) in 1:1:3 molar ratios were reacted with CsBr as fluxing agent for five days at 750 °C in evacuated fused silica (SiO₂) ampoules.     

Thermal decomposition of di-t-butyl peroxide in the presence of (CH3)2CCH2: Reactions of CH3, (CH3)2ĊCH2CH3, and (CH3)2ĊCH2C(CH3)2CH2CH3 radicals

A study of the reaction initiated by the thermal decomposition of di-t-butyl peroxide (DTBP) in the presence of (CH₃)₂C?CH₂ (B) at 391–444 K has yielded kinetic data on a number of reactions involving CH₃ (M·), (CH₃)₂CCH₂CH₃ (MB·) and (CH₃)₂?CH₂C(CH₃)₂CH₂CH₃ (MBB·) radicals. The cross-combination ratio for M· and MB· radicals, rate constants for the addition to B of M· and MB· radicals relative to those for their recombination reactions, and rate constants for the decomposition of DTBP, have been determined. The values are, respectively, where θ = RT ln 10 and the units are dm^3/2 mol^?1/2 s^?1/2 for k₂/k and k₉/k, s^?1 for k₀, and kJ mol^?1 for E. Various disproportionation-combination ratios involving M·, MB·, and MBB· radicals have been evaluated. The values obtained are: Δ₁(M·, MB·) = 0.79 ± 0.35, Δ₁(MB·, MB·) = 3.0 ± 1.0, Δ₁(MBB·, MB·) = 0.7 ± 0.4, Δ₁(M·, MBB·) = 4.1 ± 1.0, Δ₁(MB·, MBB·) = 6.2 ± 1.4, and Δ₁(MBB·, MBB·) = 3.9 ± 2.3, where Δ₁ refers to H-abstraction from the CH₃ group adjacent to the center of the second radical, yielding a 1-olefin. © 1994 John Wiley & Sons, Inc.     

Synthesis of α‐diaminomethylenebutyrolactams by the reaction of α‐cyanobutyrolactams with n‐trimethylsilylamines

Successive treatment of α‐cyanobutyrolactams 1 with N‐trimethylsilylamines and water gave the corresponding α‐diaminomethylenebutyrolacatms 2 in good yields. In the NOESY spectra of 2 , the E isomer, the NOE observed between β‐CH₂ (butyrolactam) and N‐CH₂ (morpholine, pyrrolidine) or N‐CH₃ (dimethylamine) indicated a cis configuration of these groups.     

Thermal decomposition of 2,2-propane-d2. CH3CDCH3 radical isomerization

The decomposition of CH₃CD₂CH₃ was studied from 713 to 853 K at pressures of 98–466 torr. The values of k₁/k₂ = 2.08 ± 0.05 and k₃/k₄ = 2.04 ± 0.66 were found independent of temperature by measuring the ratios of CH₄/CH₃D and CH₃CHD₂/CH₃CD₃, respectively, for the following reactions: . Isomerization of CH₃CDCH₃ was detected by measuring CHDCH₂ formed from the isomerized radical. The expression of k₂₁/k₂₂ was found to be where k₂₁ and k₂₂ are the rate constants of . The results and conclusions are discussed and compared with previous works.     

The very-low-pressure study of the kinetics and equilibrium: Cl + CH4 ⇄ CH3 + HCl at 298 K. The heat of formation of the CH3 radical

The bimolecular rate constant for the direct reaction of chlorine atoms with methane was measured at 25°C by using the very-low-pressure-pyrolysis technique. The rate constant was found to be In addition, the ratio k₁/k_?1 was observed with about 25% accuracy: K₁₍₂₉₈₎ = 1.3 ± 0.3. This gives a heat of formation of the methyl radical ΔH° _{f 298}(CH₃) = 35.1 ± 0.15 kcal/mol. A bond dissociation energy BDE (CH₃ ? H) = 105.1 ± 0.15 kcal/mol in good agreement with literature values was obtained.     

Das neue Neodym(III)‐Oxidchlorid‐Oxoselenat(IV) Nd7O5Cl3[SeO3]4

Pale violet, needle‐shaped single crystals of the new neodymium(III) oxide chloride oxoselenate(IV) Nd₇O₅Cl₃[SeO₃]₄ were obtained by the reaction of Nd₂O₃ and NdCl₃ with SeO₂ (molar ratio: 3:1:4) in evacuated silica ampoules within seven days at 775 °C, if an excess of CsCl worked as fluxing agent. Nd₇O₅Cl₃[SeO₃]₄ crystallizes in the triclinic space group P with the lattice parameters a = 694.46(4), b = 944.53(5), c = 1567.92(9) pm, α = 87.821(3), β = 81.849(3), γ = 84.852(3)° and Z = 2. Its structure exhibits seven crystallographically different Nd³⁺ cations, of which (Nd1)³⁺ – (Nd4)³⁺ are coordinated by O^2– anions forming distorted square prisms. The polyhedra of (Nd1)³⁺ and (Nd2)³⁺ receive additional caps by one Cl^– anion each, and (Nd5)³⁺ – (Nd7)³⁺ show mixed square antiprismatic environments of O^2– and Cl^– anions too. However, the polyhedra of (Nd5)³⁺ and (Nd6)³⁺ include two, the polyhedron about (Nd7)³⁺ even three Cl^– anions. Two‐dimensional layers of edge‐ and vertex‐linked [ONd₄]¹⁰⁺ tetrahedra are built up by (O1)^2– – (O5)^2– together with all Nd³⁺ cations. All the other oxygen atoms belong to four crystallographically different Se⁴⁺ cations erecting ψ¹‐tetrahedral oxoselenate(IV) units [SeO₃]^2– with stereochemically active non‐bonding electron pairs (“lone pairs”) pointing into the free space between the layers. Three independent Cl^– anions in threefold coordination of Nd³⁺ cations interconnect the layers to form a three‐dimensional network, thereby achieving the charge balance.     

Quenching of N2(A3Σu+) by O2, O,N, and H

Metastable N₂(A³Σ_u⁺), υ = 0, υ = 1, molecules are produced by a pulsed Tesla-type discharge of a dilute N₂/Ar gas mixture. Rate coefficients for quenching these metastable levels by O₂, O, N, and H were obtained by time-resolved emission measurements of the (0, 6) and (1, 5) Vegard–Kaplan bands. In units of cm³/mole · sec at 300°K and with an experimental uncertainty of ±20%, these rate coefficients for N₂(A³Σu⁺) are Within the limits of error these coefficients apply to quenching N₂(A³Σ_u⁺) υ′ = 1 as well.     

Synthesis of obtusinin and 7-(3′-hydroxymethylbut-2′-enyloxy)-6-methoxy-2H-1-benzopyran-2-one

Obtusinin (1) has been synthesised by the reaction of 6-methoxy-7-(3-methylbut-2-enyloxy)-2H-1-benzopyran-2-one (3) with OsO₄. Synthesis of 7-(3-hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-one (2) has been achieved by the regiospecific oxidation of3 with SeO₂ followed by reduction of the formed aldehyde with KBH₄.

---

Synthese von Obtusinin und 7-(3-Hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-on

Zusammenfassung Obtusinin (1) wurde über 6-Methoxy-7-(3-methylbut-2-enyloxy)-2H-1-benzopyran-2-on (3) mit OsO₄ synthetisiert. Die Darstellung von 7-(3-Hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-on (2) wurde mittels regioselektiver Oxidation von3 mit SeO₂, gefolgt von Reduktion des gebildeten Aldehyds mit KBH₄, bewerkstelligt.