A novel synthesis of 2'-hydroxy-1',3'-xylyl crown ethers

Six novel 2' - hydroxy - 1',3' - xylyl crown ethers (8a–e and 13)¹ have been synthesized utilizing the allyl group to protect the OH function during the cyclization reaction. The macrocycles 6a-e were formed in yields of 26 to 52%, by intermolecular reaction of 4 - chloro - 2,6 - bis(bromomethyl) - 1 - (2 - propenyloxy)benzene (5) with polyethylene glycols; 6a was also obtained by an intramolecular cyclization reaction of monotosylate 14.A 30-membered ring with a 2' - hydroxy - 1',3' - xylyl sub-unit was obtained in 87% yield by reaction of ditosylate 9 with bis [2 - (o - hydroxyphenoxy)ethyl]ether (11) in the presence of cesium fluoride. The synthesis of crown ethers with a 2' - hydroxy - 1',3' - xylyl sub-unit (1c–e, H for CH₃) by demethylation of the corresponding 2'-methoxy crown ethers 1c–e with lithium iodide were unsuccessful; it would appear that the demethylation reaction is restricted to 15- and 18-membered rings. One of the 2' - hydroxy - 1',3' - xylyl crown ethers 8d forms a crystalline 1:1-complex with water.     

5'-Substituted 2,2'-anhydrouridines

3',5'-Di-O-acetyl-2'-halogenouridines (1a, 1c and 1d) can be partially deacetylated at C-5' by transesterification with methanol-HCl, providing the 3'-O-acetyl derivatives 2a–2c. These can be converted into the 5'-O-mesyl derivatives 3a–3c, and latter into the 5'-chloro compounds 3d-3f. All 5'-substituted 2'-halogeno compounds give the corresponding 2,2'-anhydrouridine derivatives 4a–4c on treatment with NaOMe. Structures were proved by IR and ¹H-NMR.     

Synthesis and reactivity of [(η-[32](1,3)Cyclophane)Mn(CO)3][BF4]

The manganese cyclophane complex, [(η⁶-[3₂](1,3)cyclophane)Mn(CO)₃][BF₄] 2, was prepared by the reaction of [[3₂](1,3)cyclophane] 1 with Mn(CO)₅FBF₃. Reaction of 2 with NaBH₃CN yielded the cyclohexadienyl manganese complex [(η⁵-6H-[3₂](1,3)cyclophane)Mn(CO)₃] 3. Interestingly, treatment of 3 with Mn(CO)₅FBF₃ gave the bis-manganese complex (η⁶,η⁵-6H-[3₂](1,3)cyclophane)[Mn(CO)₃]₂[BF₄] 4. When NaBH₃CN was treated with 4, [(η⁵,η⁵-6H,6^′H-[3₂](1,3)cyclophane)Mn(CO)₃] 5 was isolated as yellow crystals. The structure of compounds 2 and 3 were determined by single-crystal X-ray crystallography.     

2'-Desoxytubercidin: synthese des o-3'-phosphoramidites und kondensation zu 2'-desoxytubercidylyl(3' → 5')-2'-desoxytubercidin

The phosphoramidite of 2'-deoxytubercidin (2) has been prepared by phosphitylation of compound 3b with chlorodiisopropylaminomethoxyphosphane. The intermediate 3b was obtained from 2'-deoxytubercidin (1) by N⁴-benzoylation and subsequent O-5'-dimethoxytritylation. Condensation of compound 2 with O-3'-silylated 3e gave the fully protected dimer 4b, which was converted into 2'-deoxytubercidylyl (3' → 5')-2'-deoxytubercidin(4a). Compound 4a isoster with 2'-deoxyadenosylyl(3' → 5')-2'-deoxyadenosine (d(ApA)) exhibits a hypochromicity of 11% (270 nm) due to strong stacking interactions. Cleavage of the dinucleoside monophosphate 4a with nuclease S₁ occurs five times faster than that of d(ApA). This shows that the single strand specific enzyme recognises the geometry of the stacked nucleobases.     

The addition of benzocyclobutenylidene to benzene : The facile rearrangement of spiro[benzocyclobutene-1,7'-cyclohepta-1',3',5'-triene] to 9a,10-dihydrobenz[α]azulene

Thermal decomposition of the sodium salts of benzocyclobutenone tosylhydrazone and 2-methylbenzocyclobutenone tosylhydrazone in benzene affords 9a,10-dihydrobenz[α]azulene 4 and trans-10-methyl-9a, 10-dihydrobenz[α]azulene 3, respectively. A mechanism involving initially the addition of the carbene benzocyclobutenylidene, or its 2-Me derivative, to the benzene ring is postulated. A proposed intermediate in the reaction, spiro [benzocyclobutene 1,7' cyclohepta-1',3',5'-triene] 12 has been synthesised, and shown to give rise to 4 under the reaction conditions. The rate of rearrangement of 12 → 4 has been measured, and the activation energy determined: E_a = 125.9 ± O.8 KJmol^?1 and A = 1.38 × lO¹⁴sec^?1. The mechanism for the rearrangement must involve ring opening of the benzocyclobutene moiety of 12 to give an o- xylylene intermediate which is postulated to possess considerable diradical character. At 71.8 °, this ring opening is 2.7 × 10⁶ times faster than the ring opening of the parent benzocyclobutene molecule. The decomposition of the sodium salt of 2-(7' -cyclohepta-1',3',5' trienyl)benzaldehyde tosylhydrazone has also been investigated and is shown to yield 4a,10-dihydrobenz[α]azulene, 9,10-dihydrobenz[α]azulene and 8,9-benzotricyclo [5.3.0.0^2.10]deca-3,5,8-triene. A mechanism involving intramolecular 1,3-dipolar addition of a diazo grouping to a cycloheptatriene Π-bond, followed by decomposition of the resulting pyrazoline intermediate, is proposed.     

Compounds with bridgehead nitrogen. 44—the conformational analysis of perhydropyrido[1,2-c] [1,3]thiazine

The 270 MHz NMR data on trans- and cis-(H-4a, H-7)-7-ethylperhydropyrido[1,2-c][1,3]thiazine show heavy conformational bias to the trans- and S-inside cis-fused conformations, respectively. Comparison of the ¹³C NMR spectra of these anancomeric systems with the ¹³C NMR spectrum of perhydropyrido[1,2-c][1,3]thiazine indicates a trans-?S-inside cis-conformational equilibrium for the latter compound in CDCl₃ at 25°C, containing ca 75% trans-fused conformer. The ¹³C NMR spectrum of perhydropyrido[1,2-c][1,3]-thiazine at ?75°C showed 64% trans-fused conformer and 36% S-inside cis-conformer.     

Transpositions thermiques de derives d'α-pinene

Novel thermal transformations of (+)-pin-2-en-9-al 1 and (+)-9-methyl-pin-2-en-9-one 3 by [3,3] sigmatropic mechanism to allyl vinyl ethers 2 and 4 are described. The ether 4 may undergo further rearrangement in an acid-catalysed step to the (-)-2.6-dimethylbicyclo[3.3.1]non-6-en-2ones (5 and 5'). Formation of the bicyclic ketones (+)-5 and 5' of opposite absolute configuration occurs by [3,3] sigmatropic rearrangement of the trimethylsilyl enol ether of 3 and hydrolysis. The proposed mechanism is confirmed by studying the deuterated ketone d₃^?3.     

Rhodium(I) carbonyl complexes of chalcogen functionalized tripodal phosphines, [CH3C(CH2P(X)Ph2)3] {X = O, S, Se} and their reactivity

The reaction of dimeric rhodium precursor [Rh(CO)₂Cl]₂ with two molar equivalent of 1,1,1-tris(diphenylphosphinomethyl)ethane trichalcogenide ligands, [CH₃C(CH₂P(X)Ph₂)₃](L), where X = O(a), S(b) and Se(c) affords the complexes of the type [Rh(CO)₂Cl(L)] (1a–1c). The complexes 1a–1c have been characterized by elemental analyses, mass spectrometry, IR and NMR (¹H, ³¹P and ¹³C) spectroscopy and the ligands a–c are structurally determined by single crystal X-ray diffraction. 1a–1c undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I and C₆H₅CH₂Cl to give Rh(III) complexes of the types [Rh(CO)(COR)ClXL] {R = –CH₃ (2a–2c), –C₂H₅ (3a–3c); X = I and R = –CH₂C₆H₅ (4a–4c); X = Cl}. Kinetic data for the reaction of a–c with CH₃I indicate a first-order reaction. The catalytic activity of 1a–1c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 1564–1723) is obtained compared to that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature 130 ± 2 °C, pressure 30 ± 2 bar and time 1 h.     

The circular dichroism,crystal and molecular structure,and absolute configuration,of dinaphtho[2,1-c,1',2'-e]dithiin

The structure of the title compound has been determined by single-crystal X-ray analysis and refined by least-squares methods based on diffractometer data (1388 counter intensities, R 0.035). The crystals are monoclinic, space group P2₁, with Z=2. a = 13.360(2), b =5.755(1), c = 10.318(1) Å and β = 108.32(1)°. The atoms of each naphthalene nucleus in the molecule are coplanar to within the rms value of 0.087 Å, and the intramolecular dihedral angle between the mean planes of those nuclei is 56°. Both the Bijvoet X-ray method and an analysis of the circular dichroism spectrum indicate that the (+)?isomer has the (S)-configuration, providing a reference for the correlation of configuration in the series of chiral 1,1'-binaphthyl-2.2'-sulphur-substituted derivatives.     

Iminophosphines: synthesis, formation of 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and N-(pyridin-2-yl)-2-diphenylphosphinoylaniline, coordination chemistry and applications in platinum group catalyzed Suzuki coupling reactions and hydrosilylations

The aprotic and protic bi- and multidentate iminophosphines 2-Ph₂PC₆H₄N=CR¹R² (R¹=H, R²=Ph=2a; R¹=Me R²=Ph=2b; R¹=H, R²=2-thienyl=2c; R¹=H, R²=C₆H₄-2-PPh₂=2d; R¹=H, R²=C₆H₄-2-OH=2e, R¹=H, R²=C₆H₄-2-OH-3-Bu^t=2f; R¹=H, R²=CH₂C(O)Me=2g) have been prepared by the acid catalyzed condensation of 2-(diphenylphosphino)aniline with the corresponding aldehyde–ketone. Iminophosphine 2d can be reduced with sodium cyanoborohydride to give the corresponding amino-diphosphine 2-Ph₂PC₆H₄N(H)CH₂C₆H₄-2-PPh₂ (2h). In the presence of a stoichiometric quantity of acid, 2-(diphenylphosphino)aniline reacts in an unexpected manner with benzaldehyde, salicylaldehyde, or acetophenone to give the corresponding 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and with pyridine-2-carboxaldehyde to give N-(pyridin-2-ylmethyl)-2-diphenylphosphinoylaniline, the latter of which has been characterized by single-crystal X-ray crystallography, as its palladium dichloride derivative. The attempted condensation of 2-(diphenylphosphino)aniline with pyridine-2-carboxaldehyde to give the corresponding pyridine-functionalized iminophosphine resulted in an unusual transformation involving the diastereoselective addition of two equivalents of aldehyde to give 1,2-dipyridin-2-yl-2-(o-diphenylphosphinoyl)phenylamino-ethanol, which has been characterized by a single-crystal X-ray structure determination. The bidentate iminophosphine 2-Ph₂PC₆H₄N=C(H)Ph reacts with [(cycloocta-1,5-diene)PdClX] X=Cl, Me) to give [Pd{2-Ph₂PC₆H₄N=C(H)Ph}ClX] and the imino-diphosphine 2-Ph₂PC₆H₄N=C(H)C₆H₄-PPh₂ reacts with [(cycloocta-1,5-diene)PdClMe] to give [Pd{2-Ph₂PC₆H₄N=C(H)C₆H₄---PPh₂}ClMe] and each has been characterized by single-crystal X-ray crystallography. The monobasic iminophosphine 2-Ph₂PC₆H₄N=C(Me)CH₂C(O)Me reacts with [Ni(PPh₃)₂Cl₂] in the presence of NaH to give the phosphino–ketoiminate complex [Ni{2-Ph₂PC₆H₄N=C(Me)CHC(O)Me}Cl], which has been structurally characterized. Mixtures of iminophosphines 2a–h and a palladium source catalyze the Suzuki cross coupling of 4-bromoacetophenone with phenyl boronic acid. The efficiency of these catalysts show a marked dependence on the palladium source, catalysts formed from [Pd₂(OAc)₆] giving consistently higher conversions than those formed from [Pd₂(dba)₃] and [PdCl₂(MeCN)₂]. Catalysts formed from neutral bi- and terdentate iminophosphines 2a–d gave significantly higher conversions than those formed from their monobasic counterparts 2e–f. Notably, under our conditions the conversions obtained with 2a–c compare favorably with those of the standards; catalysts formed from tris(2-tolyl)phosphine and tris(2,4-di-tert-butylphenyl)phosphite and a source of palladium. In addition, mixtures of [Ir(COD)Cl]₂ and 2a–h are active for the hydrosilylation of acetophenone; in this case catalysts formed from monobasic iminophosphines 2e–f giving the highest conversions.     

Electronic control of stereoselectivity-21 : Stereochemical parallelism between dienophilic capture and singlet oxygenation of isodicyclopentadiene derivatives

The stereochemistry and product distribution resulting from reaction of 4',5',6',7'- tetrahydrospirol[cyclopropane-1,2']-[4,7]methano[2$\text{H}$]indene(5), endo-2-methyl(6a) and 2,2-dunethyl-4,7-dihydro-4,7-methano-2$\text{H}$-indene (6b), as well as 4',5',6',7'-tetrahydrospiro[cyclopentane-1,2']-[4,7]methano-[2$\text{H}$]indene (7) with singlet oxygen have been determined. Stereochemical assignments to the diepoxide products were readily deduced by ¹³C-NMR comparison with the spectra of the parent isomcrs of established structure (X-ray). To unravel the stereochemistry of the epoxy aldehydes, recourse was made to 2D NOE experiments The observed stereosclectivity and reaction profile of each substrate are analyzed and placed in proper mechanistic and energetic perspective.     

η-Alkynyl and vinylidene transition metal complexes: 10. Reaction of the metal-acetylide [(η-C5H5)(CO)(NO)W---CC---C(CH3)3]Li with 1,2-diiodoethane as electrophile and with various nucleophiles

Treatment of the η¹-acetylide complex [(η⁵-C₅H₅)(CO)(NO)W---CC---C(CH₃)₃]Li (4) with 1,2-diiodoethane in THF at −78 °C, followed by the addition of Li---CC---R [R=C(CH₃)₃, C₆H₅, Si(CH₃)₃, 6a–6c] or n-C₄H₉Li and protonation with H₂O, afforded the corresponding oxametallacyclopentadienyl complexes (η⁵-C₅H₅)W(I)(NO)[η²-O=C(CC---R)CH=CC(CH₃)₃] (7a–7c), 8c and (η⁵-C₅H₅)W(I)(NO)[η²-O=C(n-C₄H₉)CH=CC(CH₃)₃] (9). The formation of these metallafuran derivatives is rationalized by the electrophilic attack of 1,2-diiodoethane onto the metal center of 4 to form first the neutral complex [(η⁵-C₅H₅)(I)(CO)(NO)W---CC---C(CH₃)₃] (5). Subsequent nucleophilic addition of Li---CC---R 6a–6c or n-C₄H₉Li and a reductive elimination step followed by protonation leads to the products 7a–7c and 9. One reaction intermediate could be trapped with CF₃SO₃CH₃ and characterized by a crystal structure analysis. The identity of another intermediate was established by infrared spectroscopic data. The oxametallacyclopentadienyl complex 10 forms in the presence of excess 1,2-diiodoethane through an alternative pathway and crystallizes as a clathrate containing iodine.     

The synthesis and crystal structure of 5-acetyl-2'-deoxyuridine

5- Acetyl - 2' - deoxyuridine (1) has been synthesised by treating 2' - deoxy - 5 - ethynyluridine with dilute sulphuric acid. Condensation of the trimethylsilyl derivative of 5-acetyluracil with 2-deox-3, 5-di-O-p-toluoyl-α-d-erythropen chloride gave a mixture of α- and β-anomeric blocked nucleosides from which the α-anomer was isolated and the p-toluoyl groups removed to give 5 - acetyl -1 - (α - d - 2- deoxyerythropentofuranosyl) uracil. Only a poor yield of the β-anomer (1) was obtained by this procedure. The UV spectra and m.p. obtained for 1 differed from the values quoted in the literature. The crystals of 1 are monoclinic, space group P2₁, with a = 9.525, b = 12.16, c = 5.22 Å, β = 92.03° and two molecules in the unit cell. The structure was refined by least-squares calculations to R 3.4% for 1426 observed counter amplitudes. The pyrimidine ring is essentially planar with the acetyl group inclined at 6° to it. The sugar ring has the highly unusual C(4')-exo conformation and the arrangement about C(4')-C(5') is such that O(5') is oriented gauche with respect to both O(1') and C(3'). The glycosidic torsion angle O(1')-C(1')-N(1)-C(6) is 56° (anti conformation).     

Molecular structure of some [1.1 ]ferrocenylruthenocenophanium (n = 1,2 polyiodides salts

Oxidation of [1.1]ferrocenylruthenocenophane with a large excess and 1.5 equivalents of iodine gives dicationic iodo[1.1]ferrocenylruthenocenophanium²⁺I₃⁻ · 0.5I₂2 (1) and monocationic [1.1]ferrocenylruthenocenophanium⁺I₃⁻ (2) salts respectively. The structures of 1 and 2 were analyzed by single-crystal X-ray diffraction studies. The crystal form of 1 is monoclinic space group C2/c, A = 21.35](5), B = 20.594(5), C = 17.397(4) Å, β = 124.17(1)°, Z = 8, and the final R = 0.068 and R_w = 0.070. The cation formulated as [Fe^III(C₅H₄CH₂C₅H₄)₂Ru^IVI]²⁺ exists in a syn-conformation as in the cases of the neutral compound. The distance between the Ru^IV and Fe^II is 4.656(4) Å, which is much shorter than the value of the neutral compound (4.792(2) Å), and the bond angle of I---Ru^IV,Fe^III is 81.26°. The dihedral angle between the two η⁵-C₅H₄ (fulvenide) rings on the Ru^IV moiety is 37.56° due to the Ru^IV---I bond (2.758(3) Å). These two rings of Fe^III and Ru^IV moieties are essentially eclipsed. The unit cell has three kinds of I₃⁻ (I_3a⁻, I_3b⁻ and I_3c⁻) and one I₂, and the formula of 1 is given as [Fe^III(C₅H₄CH₂CSH₄)₂Ru^IVI]²⁺I₃⁻ · 0.5(I₃⁻)₂ · 0.5I₂. The crystal of 2 formulated as [Fe^III(C₅H₄CH₂C₅H₄)₂Ru^II]⁺I₃⁻ is triclinic space group

Full-size image

, and the final R = 0.067 and R_w = 0.068. The unit cell has two independent molecules (unit A and B); i.e. two kinds of distance between the Ru^II and Fe^III, are observed; one (A) is 4.615(3) and the other (B) is 4.647(3) α. The two η⁵-C₅H₄ rings of both Fe^III and Ru^II are essentially staggered and the dihedral angles between the rings of FcH and RcH moieties are less than 5.8°. Typical ferrocenium-type broad singlet ⁵⁷Fe-Mössbauer lines are observed for both salts (1, 2) at all temperatures.     

C—H...π interactions in five ethynyl‐substituted [2.2]paracyclophanes: further examples of the `7,11' packing pattern

The monosubstituted derivative 4‐ethynyl[2.2]paracyclophane, C₁₈H₁₆, (I), and the four disubstituted isomers, 4,12‐, (II), 4,13‐, (III), 4,15‐, (IV), and 4,16‐diethynyl[2.2]paracyclophane, (V), all C₂₀H₁₆, show the usual distortions of the [2.2]paracyclophane framework. The crystal packing is analyzed in terms of C—H...π interactions, some with H...π as short as 2.47 Å, in which the cyclophane rings and/or the triple‐bond systems may act as acceptors. For compounds (I) and (IV), the known `7,11'‐type cyclophane packing is observed, with a herring‐bone pattern of molecules in a layer structure.     

Synthetic and structural studies of [6]-, [7]- and [10]metacyclophanes

A new preparative sequence from 2,3-polymethylene-2-cyclopentenone 5 to 2,6-polymethylenebromobenzenes 3 (n = 6, 7, 10) and 2,6-polymethylenephenyllithiums 6 has been found. The reaction of 6 with various electrophiles produces a number of new compounds to disclose the unique reactivity of the aryl C-Li moiety surrounded by the polymethylene chain. Photolysis of 3a and 3b provides transannular products 8, 10 and 11, all arising from the proximity between the aromatic bromine and the aliphatic hydrogen intraannularly opposed to be removed as HBr. Spectrometric study gives quantitative data of the dependence of the molecular geometry upon the chain length and the aromatic substituents. The energy barriers ΔG_c^≠ of the conformational flipping are 17·4 kcal/mol (T_c 76·5°) for [6]metacyclophane (7a), 11·5 kcal/mol (T_c ?28°) for [7]metacyclophane (7b), ·8 kcal/mol for [10]metacyclophane (7c). The lower-energy process of the aliphatic chain in [6]metacyclophane derivatives is the pseudorotation with substituent-dependent barrier ΔG_c^≠ 11·1 kcal/mol (T_c ?31·5°) for 7a, 12·4 kcal/mol (T_c ?4·5°) for 3a and 12·7 kcal/mol (T_c 1·0°) for 12a. The rather large rotational barrier is attributed to the compressed structure of each system. The benzene ring distortion of the cyclophanes is deduced from the bathochromic shift of the B-band and the diamagnetic shift of the benzene proton signals in the PMR.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

v-Triazolines. part XXI. Spiro[bicyclo[2.2.1]hept-2-ene[54']1',2'.s'-triazole]derivatives from cyclopentadiene and 5-amino-4-methylene-v-triazolines

1R^*, 4R^*, 5S^*, 5'S^*-5'-Amino-1'-(4-nitrophenyl)-4',5'-dihydrospiro[bicyclo [2.2. 1]hept-2-ene[5.4]-1',2',3'-triazoles]$\text{2}$ have been obtained both by ?4 +2]-cycloaddition of cyclopentadiene to amino-methylene-1-(4-nitrophenyl)-4,5-dihydro-v-triazoles $\text{1}$ and by [3+2]-cycloaddition of 4-nitrophenylazide to 5-aminomethylene-2-norborenes $\text{4}$. The configuration has been fully established by X-ray crystallographic analysis. The course of the cycloaddition and the thermal behaviour of $\text{2}$ are discussed.     

Effect of chelating agent on the oxidation rate of PCP in the magnetite/H2O2 system at neutral pH

The complex [Rh(CO)₂Cl]₂ reacts with two molar equivalent of pyridine carboxylic acids ligands Py-2-COOH(a), Py-3-COOH(b) and Py-4-COOH(c) to yield rhodium(I) dicarbonyl chelate complex [Rh(CO)₂(L^/)](1a) {L^/ = η²-(N,O) coordinated Py-2-COO⁻(a^/)} and non-chelate complexes [Rh(CO)₂ClL^//](1b,c) {L^// = η¹-(N) coordinated Py-3-COOH(b), Py-4-COOH(c)}. The complexes 1 undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to give penta coordinated Rh(III) complexes of the types [Rh(CO)(CORⁿ)XL^/], {n = 1,2,3; R¹ = CH₃(2a); R² = C₂H₅(3a); X = I and R³ = CH₂C₆H₅ (4a); X = Cl}, [Rh(CO)I₂L^/](5a), [Rh(CO)(CORⁿ)ClXL^//] {R¹ = CH₃(6b,c); R² = C₂H₅(7b,c); X = I and R³ = CH₂C₆H₅ (8b,c); X = Cl} and [Rh(CO)ClI₂L^//](9b,c). The complexes have been characterized by elemental analysis, IR and ¹H NMR spectroscopy. Kinetic data for the reaction of 1a–b with CH₃I indicate a first order reaction. The catalytic activity of 1a–c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 810–1094) is obtained compared with that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 653) at mild reaction conditions (temperature 130 ± 5 °C, pressure 35 ± 5 bar).     

Carbomolybdate clusters formed by carbonyl insertion into molybdenum-oxygen bonds. Structural investigation of the [RMo4O15X] core (R = ---C9H4O, X = OCH3; R = ---C14H10, X = ---C7H5O2; R = C14H8, X = ---OH)

[C₄H₉)₄N]₂[Mo₂O₇] reacts with a variety of organic species containing α-diketone groups to give tetranuclear complexes of general composition [RMo₄O₁₅X]³⁻. The complexes [(C₄H₉)₄N]₃[(C₉H₄O)Mo₄O₁₅(OCH₃)] (I), [(C₄H₉)₄N]₃[(C₁₄H₁₀)Mo₄O₁₅(C₆H₅CO₂)] (11) and [(C₄H₉)₄N]₃[(C₁₄H₈)Mo₄O₁₅(OH)] (III) were synthesized from the reactions of dimolybdate with ninhydrin, benzil and phenanthraquinone, respectively. Complex II may also be prepared from dimolybdate and benzoin in acetonitrile-methanol solution, from which it co-crystallizes with the binuclear species [(C₄H₉)₄N]₂[Mo₂O₅(C₆H₅C(O)C(O)C₆H₅)₂] · CH₃CN · CH₃OH (IV). Complexes I–III exhibit the tetranuclear core, previously described for the α-glyoxal derivatives [(C₄H₉)₄N]₃[(HCCH)Mo₄O₁₅X], where X = F⁻ or HCO₂⁻. The ligands may be formally described as diketals, formed by insertion of ligand carbonyl subunits into molybdenum-oxygen bonds. The structures I–III differ most dramatically in the identity and coordination mode of the anionic ligand X⁻ which occupies a position opposite the diketal moiety relative to the [Mo₄O₁₁]²⁺ central cage. Thus, I exhibits a doubly bridging methoxy group in this position, while II possesses a benzoate ligand with an unusual μ₃-O,O′coordination mode. Complex III presents a hydroxy-group unsymmetrically bonded to three of the molybdenum centres. The stereochemical consequences of the various coordination modes are discussed. Crystal data: Compound I, monoclinic space group Pc, a = 24.888(2), b = 12.897(3), c = 24.900(3) Å, β = 101.94(2)°, D_calc = 1.28 g cm⁻¹ for Z = 4. Structure solution and refinement based on 8695 reflections with F_o 6σ(F_o) (Mo-K_α, λ = 0.71073 Å) converged at a conventional discrepancy factor of 0.060. Compound II, orthorhombic space group Pbca, a = 20.426(6), b = 26.916(6), c = 32.147(7) Å, V = 17673.2(20) ų, D_calc = 1.33 g cm⁻³ for Z = 8; 5224 reflections, R = 0.076. Compound III, tetragonal space group I4₁/a, a = b = 48.129(6), c = 13.057(2) Å, V = 30246.2(12) ų, D_calc = 1.35 g cm⁻³ for Z = 16; 5554 reflections, R = 0.053. Compound IV, orthorhombic space group Pnca, a = 16.097(4), b = 16.755(4), c = 25.986(7) Å, V = 7008.1(13) ų, Z = 4, D_calc = 1.18 g cm⁻³ ; 2944 reflections, R = 0.061.