在石墨阳极上电化学合成癸二酸

癸二酸是重要的化工原料。至今国内外工业上均采用蓖麻油为原料生产癸二酸。人们正在积极开发新的原料合成癸二酸。国内在铂阳极上用己二酸单甲酯电化学合成癸二酸已获得了较高收率93%。因铂价格昂贵,要实现工业化还较困难。本文通过测定石墨电极的极化曲线,探索石墨成为电极材料的可能性。     

可生物降解聚酯酰胺共聚物的合成与表征

以两种合成的酰胺二元醇和癸二酸为原料合成了可生物降解的聚酯酰胺共聚物,研究了该癸半晶性聚合物的合成、结晶及其生物降解性,并应用ＩＲ,＾１Ｈ ＮＭＲ,ＳＥＭ及ＤＳＣ进行了表征。     

癸二酸二缩水甘油酯的合成

以癸二酸为原料,合成了癸二酸二缩水甘油酯(DGSE),其结构经1H NMR,MS和元素分析表征。优化反应条件为:癸二酸100 mmol,n(癸二酸)∶n(NaOH)∶n(环氧氯丙烷)=1∶2∶3,催化剂x(四乙基溴化铵)=0.5%,回流反应2 h。在优化反应条件下,DGSE的收率93.4%,纯度82.6%。     

微波辐射下从废聚酯饮料瓶中回收对苯二甲酸——推荐一个绿色有机化学实验

推荐一个绿色有机化学实验——微波辐射下从废聚酯饮料瓶中回收对苯二甲酸.以废聚酯饮料瓶为原料,乙二醇和碳酸氢钠为复合解聚剂,在催化剂氧化锌的存在下,利用微波辐射技术使废聚酯在常压下快速、彻底解聚,残留物水溶、过滤除杂,酸析回收对苯二甲酸,减压蒸馏回收乙二醇.并通过IR验证了产物的结构.     

磺酸功能化离子液体催化3-羟基丙酸甲酯酯交换聚合反应

以磺酸功能化咪唑离子液体为催化剂,以3-羟基丙酸甲酯为原料,采用自身酯交换法合成了具有生物可降解性能的聚羟基脂肪酸酯.系统考察了离子液体种类、反应温度以及聚合反应时间对反应性能的影响,同时采用红外、核磁、热分析等手段对产物进行表征.研究结果表明:阴离子为CF3SO-3的磺酸功能化离子液体在120℃的低温下催化聚合反应所得聚酯Mw可达10 159,收率82.1%;通过水洗方法可有效去除产物中的离子液体催化剂,从而避免催化剂污染产物.     

新型聚酯增塑剂的合成及增塑聚氯乙烯性能

以生物质化工产品衣康酸加氢产物2-甲基丁二酸为原料,采用熔融缩聚法制备了一种新型聚酯增塑剂聚2-甲基丁二酸1,3-丙二醇酯,采用红外光谱(FTIR)和核磁共振(1H NMR)对聚酯的结构进行了表征.通过扫描电镜(SEM)、动态力学分析(DMA)、拉伸测试对该聚酯增塑聚氯乙烯(PVC)的增塑效果进行的表征结果表明,该聚酯与PVC相容性良好,可大大改善PVC材料的硬度,增加其断裂伸长率,降低PVC的玻璃化转变温度、拉伸强度及拉伸模量.与小分子增塑剂邻苯二甲酸二辛酯(DOP)相比,合成的新型聚酯增塑剂具有优异的耐抽出性、耐挥发性和耐迁移性,可提高PVC材料的使用寿命.     

含柔性间隔基的热致液晶性共聚酯的合成

将己二酸、辛二酸、癸二酸、1,10-十二烷基羧酸经酰氯化后,分别与对羟基苯甲酸合成,得到了四种二元羧酸以及与其相应的四种二元酰氯,并发现前者具有热致液晶性。 将上述单体与对苯二酚、氯代对苯二酚以及联苯二酚用溶液缩聚的方法合成了十二种规则共聚酯,并用热台偏光显微镜、DSC、X-衍射等方法对共聚酯进行了表征。结果发现各共聚酯均为向列型热致液晶,并都具有较宽的液晶态温度范围。通过改变分子结构可使共聚酯的熔点在150—300℃之间变化。     

一类可纺丝的全芳香热致性液晶共聚酯的合成和表征

利用Higashi芳香聚酯直接缩聚法的原理 ,采用一步混合投料直接缩聚的方法 ,以对羟基苯甲酸(PHB)、间苯二甲酸 (MPA)、4 ,4′ 二羟基二苯酮 (DHBP)和对苯二酚 (HQ)为单体原料 ,合成了全芳香共聚酯 .该合成方法反应条件温和 ,简单易控 ,产物分子量高 .用差热分析 (DSC)、热重分析 (TA)、偏光显微镜 (PLM)、广角X 射线衍射 (WAXD)等测试分析手段对共聚酯的热性能和液晶特性进行了表征 .研究结果表明 ,利用此方法合成所得的聚合物呈明显的向列型热致液晶特性 ,热稳定性高 ,并具有极易成纤的特点 ,有望成为一种可用于纺丝的全芳香热致液晶共聚酯材料     

生物降解热塑性弹性体的分子结构设计与性能研究

本文以来源于生物质资源的脂肪族饱和二元醇(1,3-丙二醇、1,4-丁二醇)、饱和二元酸(丁二酸、己二酸和癸二酸)为原料,采用熔融缩聚和扩链反应成功制得一种由结晶型脂肪族饱和聚酯预聚体(HPE)和无定形脂肪族饱和聚酯预聚体(SPE)嵌段而成的生物降解热塑性弹性体(BTPE).研究结果表明,该饱和脂肪族BTPE具有较宽的使用温度范围和低硬度、高弹性等特征. BTPE的玻璃化转变温度在-50℃左右,熔点在105℃以上,初始热分解温度在340℃以上; BTPE的100%定伸回复率大于85%, 300%定伸循环拉伸回复率在75%以上,断裂伸长率可达1100%,拉伸强度在7.5～9.6 MPa,硬度在56～73 HA.在脂肪酶降解液中降解15天, BTPE的失重率可达68%;在自然土壤环境条件下降解120天, BTPE的失重率在57%以上.噻唑蓝(MTT)比色法测试结果表明, BTPE无明显细胞毒性,为一级合格.本文制备的BTPE在环境友好材料和生物医用材料领域具有广阔的应用前景.     

含柔性间隔基的热致液晶性共聚酯的合成

 将己二酸、辛二酸、癸二酸、1,10-十二烷基羧酸经酰氯化后,分别与对羟基苯甲酸合成,得到了四种二元羧酸以及与其相应的四种二元酰氯,并发现前者具有热致液晶性。 将上述单体与对苯二酚、氯代对苯二酚以及联苯二酚用溶液缩聚的方法合成了十二种规则共聚酯,并用热台偏光显微镜、DSC、X-衍射等方法对共聚酯进行了表征。结果发现各共聚酯均为向列型热致液晶,并都具有较宽的液晶态温度范围。通过改变分子结构可使共聚酯的熔点在150—300℃之间变化。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.