A new ammine dual-cation (Li, Mg) borohydride: synthesis, structure, and dehydrogenation enhancement

A new ammine dual-cation borohydride, LiMg(BH(4))(3)(NH(3))(2), has been successfully synthesized simply by ball-milling of Mg(BH(4))(2) and LiBH(4)·NH(3). Structure analysis of the synthesized LiMg(BH(4))(3)(NH(3))(2) revealed that it crystallized in the space group P6(3) (no. 173) with lattice parameters of a=b=8.0002(1) ?, c=8.4276(1) ?, α=β=90°, and γ=120° at 50 °C. A three-dimensional architecture is built up through corner-connecting BH(4) units. Strong N-H···H-B dihydrogen bonds exist between the NH(3) and BH(4) units, enabling LiMg(BH(4))(3)(NH(3))(2) to undergo dehydrogenation at a much lower temperature. Dehydrogenation studies have revealed that the LiMg(BH(4))(3)(NH(3))(2)/LiBH(4) composite is able to release over 8 wt% hydrogen below 200 °C, which is comparable to that released by Mg(BH(4))(3)(NH(3))(2). More importantly, it was found that release of the byproduct NH(3) in this system can be completely suppressed by adjusting the ratio of Mg(BH(4))(2) and LiBH(4)·NH(3). This chemical control route highlights a potential method for modifying the dehydrogenation properties of other ammine borohydride systems.     

Probing Lewis acidity of Y(BH4)3 via its reactions with MBH4 (M = Li, Na, K, NMe4)

High-energy milling of Y(BH(4))(3) (containing LiCl as a by-product, which has not been removed) with MBH(4) (M = Li, Na, K, (CH(3))(4)N) leads to the first two examples of quasi-ternary yttrium borohydrides: KY(BH(4))(4) and (CH(3))(4)NY(BH(4))(4), while no chemical reaction is observed for LiBH(4) and NaBH(4). KY(BH(4))(4) is isostructural to NaSc(BH(4))(4) (Cmcm, a = 8.5157(4) ?, b = 12.4979(6) ?, c = 9.6368(5) ?, V = 1025.62(9) ?(3), Z = 4), while (CH(3))(4)NY(BH(4))(4) crystallises in primitive orthorhombic cell, similarly to KSc(BH(4))(4) (Pnma, a = 15.0290(10) ?, b = 8.5164(6) ?, c = 12.0811(7) ?, V = 1546.29(17) ?(3), Z = 4). The thermal decomposition of hydrogen-rich KY(BH(4))(4) (8.6 wt.% H) involves the formation of an unidentified intermediate at 200 °C and recovery of KBH(4) at higher temperatures; at 410 °C, KCl and YH(2) are observed. The thermal decomposition of (CH(3))(4)NY(BH(4))(4) occurs via two partly overlapping endothermic steps with concomitant emission of H(2) and organic compounds. Heating of a NaBH(4)/Y(BH(4))(3) mixture above 165 °C results in a mixed-cation mixed-anion borohydride, NaY(BH(4))(2)Cl(2), but not NaY(BH(4))(4). The reduced reactivity of Y(BH(4))(3) towards borohydride Lewis bases when compared to hypothetical scandium borohydride can be explained by the lower Lewis acidity of Y(BH(4))(3) than Sc(BH(4))(3).     

The structure, thermal properties and phase transformations of the cubic polymorph of magnesium tetrahydroborate

The structure of the cubic polymorph of magnesium tetrahydroborate (γ-Mg(BH(4))(2)) has been determined in space group Ia3[combining macron]d from a structural database of the isoelectronic compound SiO(2); this has been corroborated by DFT calculations. The structure is found to concur with that recently determined by Filinchuk et al. (Y. Filinchuk, B. Richter, T. R. Jensen, V. Dmitriev, D. Chernyshov and H. Hagemann, Angew. Chem. Int. Ed., 2011, DOI: 10.1002/anie.201100675). The phase transformations and subsequent decomposition of γ-Mg(BH(4))(2) on heating have been ascertained from variable-temperature synchrotron X-ray diffraction data combined with thermogravimetric and mass spectrometry measurements. At ～160 °C, conversion to a disordered variant of the β-Mg(BH(4))(2) phase (denoted as β') is observed along with a further unidentified polymorph. There is evidence of amorphous phases during decomposition but there is no direct crystallographic indication of the existence of Mg(B(12)H(12)) or other intermediate Mg-B-H compounds. MgH(2) and finally Mg are observed in the X-ray diffraction data after decomposition.     

Promotion of hydrogen release from ammonia borane with magnesium nitride

Hydrogen release from ammonia borane (NH(3)BH(3), AB) can be greatly promoted by mechanical milling with magnesium nitride (Mg(3)N(2)). For example, a post-milled 6AB/Mg(3)N(2) sample started to release hydrogen from ～65 °C and gave a material-based hydrogen capacity of ～11 wt% upon heating to 300 °C. In addition to the improved dehydrogenation kinetics, the 6AB/Mg(3)N(2) sample also showed satisfactory performance in suppressing the volatile byproducts. X-ray diffraction, Fourier transform infrared spectroscopy and solid-state (11)B MAS NMR, as well as a series of designed experiments, were carried out to gain mechanistic understanding of the property improvements that arise from addition of Mg(3)N(2). Our study found that the formation of 3Mg(NH(2)BH(3))(2)·2NH(3), which is in single or mixed amidoborane ammoniate phases in nature, is an important mechanistic step in the dehydrogenation process of the 6AB/Mg(3)N(2) sample.     

Binuclear magnesium amidoborane complexes: characterization of a trinuclear thermal decomposition product

The bis-β-diketimine with a meta-phenylene bridge (META-H(2): DIPPN(H)CMeCHCMeN-C(6)H(4)-NCMeCHCMeN(H)DIPP; DIPP = 2,6-iPr-C(6)H(3)) reacted with two equivalents of nBu(2)Mg to give the bis-β-diketiminate complex META-(MgnBu)(2). The latter binuclear magnesium complex was converted to META-[MgNH(iPr)BH(3)](2) by reaction with H(2)N(iPr)BH(3). The thermal decomposition of this binuclear iPr-substituted magnesium amidoborane complex has been investigated. In benzene it starts to eliminate H(2) at 90 °C. Two decomposition products could be obtained by fractional crystallization of the residue. The first product is the trinuclear magnesium complex META-Mg(3)[iPrNB(H)N(iPr)BH(3)](2) and the second product is (META-Mg)(2). These products have been formed by ligand exchange reactions of the expected complex META-Mg(2)[iPrNB(H)N(iPr)BH(3)] and were characterized by single crystal X-ray diffraction. The central Mg(2+) ion in META-Mg(3)[iPrNB(H)N(iPr)BH(3)](2) is not connected to the ligand system and its coordination geometry could be representative of that in a solid-state magnesium salt containing the RNB(H)N(R)BH(3)(2-) ion.     

New insights into the polymerization of methyl methacrylate initiated by rare-earth borohydride complexes: a combined experimental and computational approach

Polymerization of methyl methacrylate (MMA) initiated by the rare-earth borohydride complexes [Ln(BH(4))(3)(thf)(3)] (Ln=Nd, Sm) or [Sm(BH(4))(Cp*)(2)(thf)] (Cp*=eta-C(5)Me(5)) proceeds at ambient temperature to give rather syndiotactic poly(methyl methacrylate) (PMMA) with molar masses M(n) higher than expected and quite broad molar mass distributions, which is consistent with a poor initiation efficiency. The polymerization of MMA was investigated by performing density functional theory (DFT) calculations on an eta-C(5)H(5) model metallocene and showed that in the reaction of [Eu(BH(4))(Cp)(2)] with MMA the borate [Eu(Cp)(2){(OBH(3))(OMe)C=C(Me)(2)}] (e-2) complex, which forms via the enolate [Eu(Cp)(2){O(OMe)C=C(Me)(2)}] (e), is calculated to be exergonic and is the most likely of all of the possible products. This product is favored because the reaction that leads to the formation of carboxylate [Eu(Cp)(2){OOC-C(Me)(=CH(2))}] (f) is thermodynamically favorable, but kinetically disfavored, and both of the potential products from a Markovnikov [Eu(Cp)(2){O(OMe)C-CH(Me)(CH(2)BH(3))}] (g) or anti-Markovnikov [Eu(Cp)(2){O(OMe)C-C(Me(2))(BH(3))}] (h) hydroboration reaction are also kinetically inaccessible. Similar computational results were obtained for the reaction of [Eu(BH(4))(3)] and MMA with all of the products showing extra stabilization. The DFT calculations performed by using [Eu(Cp)(2)(H)] to model the mechanism previously reported for the polymerization of MMA initiated by [Sm(Cp*)(2)(H)](2) confirmed the favorable exergonic formation of the intermediate [Eu(Cp)(2){O(OMe)C=C(Me)(2)}] (e') as the kinetic product, this enolate species ultimately leads to the formation of PMMA as experimentally observed. Replacing H by BH(4) thus prevents the 1,4-addition of the [Eu(BH(4))(Cp)(2)] borohydride ligand to the first incoming MMA molecule and instead favors the formation of the borate complex e-2. This intermediate is the somewhat active species in the polymerization of MMA initiated by the borohydride precursors [Ln(BH(4))(3)(thf)(3)] or [Sm(BH(4))(Cp*)(2)(thf)].     

Dehydrogenation tuning of ammine borohydrides using double-metal cations

The strategy of using double-cations to tune the temperature and purity of dehydrogenation of ammine borohydrides is reported. The first double-cation ammine borohydride, Li(2)Al(BH(4))(5)·6NH(3), which forms a novel structure with ordered arrangement of Al(NH(3))(6)(3+) ammine complexes and Li(2)(BH(4))(5)(3-) complex anions, is found to release over 10.0 wt % hydrogen below 120 °C with favorable kinetics and high H-purity (>99%).     

Magnesium borohydride complexed by tetramethylethylenediamine

A complex of magnesium borohydride, Mg(BH4)2.Me2NC2H4NMe2, has been synthesized and structurally characterized. This monomer complex has a pseudotetrahedral geometry around the Mg atom with tridentate BH4 groups and short Mg...B distances.     

Ammine magnesium borohydride complex as a new material for hydrogen storage: structure and properties of Mg(BH4)2.2NH3

The ammonia complex of magnesium borohydride Mg(BH4)2.2NH3 (I), which contains 16.0 wt % hydrogen, is a potentially promising material for hydrogen storage. This complex was synthesized by thermal decomposition of a hexaaammine complex Mg(BH4)2.6NH3 (II), which crystallizes in the cubic space group Fm3 m with unit cell parameter a=10.82(1) A and is isostructural to Mg(NH3) 6Cl2. We solved the structure of I that crystallizes in the orthorhombic space group Pcab with unit cell parameters a=17.4872(4) A, b=9.4132(2) A, c=8.7304(2) A, and Z=8. This structure is built from individual pseudotetrahedral molecules Mg(BH4)2.2NH3 containing one bidentate BH4 group and one tridentate BH4 group that pack into a layered crystal structure mediated by N-H...H-B dihydrogen bonds. Complex I decomposes endothermically starting at 150 degrees C, with a maximum hydrogen release rate at 205 degrees C, which makes it competitive with ammonia borane BH 3NH3 as a hydrogen storage material.     

Synthesis and structural diversity of barium (N,N-dimethylamino)diboranates

The reaction of a slurry of BaBr(2) in a minimal amount of tetrahydrofuran (THF) with 2 equiv of Na(H(3)BNMe(2)BH(3)) in diethyl ether followed by crystallization from diethyl ether at -20 °C yields crystals of Ba(H(3)BNMe(2)BH(3))(2)(Et(2)O)(2) (1). Drying 1 at room temperature under vacuum gives the partially desolvated analogue Ba(H(3)BNMe(2)BH(3))(2)(Et(2)O)(x) (1') as a free-flowing white solid, where the value of x varies from <0.1 to about 0.4 depending on whether desolvation is carried out with or without heating. The reaction of 1 or 1' with Lewis bases that bind more strongly to barium than diethyl ether results in the formation of new complexes Ba(H(3)BNMe(2)BH(3))(2)(L), where L = 1,2-dimethoxyethane (2), N,N,N',N'-tetramethylethylenediamine (3), 12-crown-4 (4), 18-crown-6 (5), N,N,N',N'-tetraethylethylenediamine (6), and N,N,N',N",N"-pentamethylethylenetriamine (7). Recrystallization of 4 and 5 from THF affords the related compounds Ba(H(3)BNMe(2)BH(3))(2)(12-crown-4)(THF)·THF (4') and Ba(H(3)BNMe(2)BH(3))(2)(18-crown-6)·2THF (5'). In addition, the reaction of BaBr(2) with 2 equiv of Na(H(3)BNMe(2)BH(3)) in the presence of diglyme yields Ba(H(3)BNMe(2)BH(3))(2)(diglyme)(2) (8), and the reaction of 1 with 15-crown-5 affords the diadduct [Ba(15-crown-5)(2)][H(3)BNMe(2)BH(3)](2) (9). Finally, the reaction of BaBr(2) with Na(H(3)BNMe(2)BH(3)) in THF, followed by the addition of 12-crown-4, affords the unusual salt [Na(12-crown-4)(2)][Ba(H(3)BNMe(2)BH(3))(3)(THF)(2)] (10). All of these complexes have been characterized by IR and (1)H and (11)B NMR spectroscopy, and the structures of compounds 1-3, 4', 5', and 6-10 have been determined by single-crystal X-ray diffraction. As the steric demand of the Lewis bases increases, the structure changes from polymers to dimers to monomers and then to charge-separated species. Despite the fact that several of the barium complexes are monomeric in the solid state, none is appreciably volatile up to 200 °C at 10(-2) Torr.     

LEV-zeotype magnesium aluminophosphates with variable Mg/Al ratios

By using two different organic amines, n-methylpiperidine and 1,2-diaminocyclohexane (DACH), as the structure-directing agents (SDAs), two magnesium aluminophosphate molecular sieves |(C(6)H(14)N)(2)|[Mg(2)Al(7)(PO(4))(9)] and |(C(6)H(14)N(2))(1.4)(H(2)O)(2)H(2)|[Mg(2)Al(5)(PO(4))(7)], denoted as MgAPO-CJ67(a) and MgAPO-CJ67(b), have been synthesized under hydrothermal conditions. They are the first example of Mg incorporated aluminophosphates with the LEV-zeotype structure. The magnesium and aluminum atoms co-occupy the same crystallographic positions in the frameworks of MgAPO-CJ67(a) and MgAPO-CJ67(b), but with different Mg/Al ratios of 1 : 3.5 and 1 : 2.5, respectively. MgAPO-CJ67(a) exhibits higher thermal stability upon calcination than MgAPO-CJ67(b), and its framework keeps intact after the removal of occluded organic SDAs. The N(2) adsorption on the calcined MgAPO-CJ67(a) sample gives the BET surface area of 386 m(2) g(-1). NH(3)-temperature programmed desorption (NH(3)-TPD) analysis shows that MgAPO-CJ67(a) has a medium acidity.     

Role of NH3 in the dehydrogenation of calcium amidoborane ammoniate and magnesium amidoborane ammoniate: a first-principles study

First-principles calculations show that [NH(3)] molecules play crucial roles as both activator for the break-up of B-H bond and supplier of protic H for the establishment of dihydrogen bonding, which could facilitate the dehydrogenation of Ca(NH(2)BH(3))(2)·2NH(3) or Mg(NH(2)BH(3))(2)·NH(3) occurring at lower temperatures compared to those of Ca(NH(2)BH(3))(2) and Mg(NH(2)BH(3))(2). Moreover, the calculations of Helmholtz Free energy and [NH(3)] molecule removal energy evidence that coordination between [NH(3)] and Mg cation is stronger than that between [NH(3)] and Ca cation; therefore, Mg(NH(2)BH(3))(2)·NH(3) will undergo directly dehydrogenation rather than deammoniation at lower temperatures.     

Stoichiometric reactivity of dialkylamine boranes with alkaline earth silylamides

Reactions of β-diketiminato group 2 silylamides, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)M(THF)(n){N(SiMe(3))(2)}] (M = Mg, n = 0; M = Ca, Sr, n = 1), and an equimolar quantity of pyrrolidine borane, (CH(2))(4)NH·BH(3), were found to produce amidoborane derivatives of the form [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)MN(CH(2))(4)·BH(3)]. In reactivity reminiscent of analogous reactions performed with dimethylamine borane, addition of a second equivalent of (CH(2))(4)NH·BH(3) to the Mg derivative induced the formation of a species, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)Mg{N(CH(2))(4) BH(2)NMe(2)BH(3)}], containing an anion in which two molecules of the amine borane substrate have been coupled together through the elimination of one molecule of H(2). Both this species and a calcium amidoborane derivative have been characterised by X-ray diffraction techniques and the coupled species is proposed as a key intermediate in catalytic amine borane dehydrocoupling, in reactivity dictated by the charge density of the group 2 centre involved. On the basis of further stoichiometric reactions of the homoleptic group 2 silylamides, [M{N(SiMe(3))(2)}(2)] (M = Mg, Ca, Sr, Ba), with (CH(3))(2)NH·BH(3) and (i)Pr(2)NH·BH(3) reactivity consistent with successive amidoborane β-hydride elimination and [R(2)N[double bond, length as m-dash]BH(2)] insertion is described as a means to induce the B-N dehydrocoupling between amine borane substrates.     

In situ hybridization of LiNH2-LiH-Mg(BH4)2 nano-composites: intermediate and optimized hydrogenation properties

Nano-composites of LiNH(2)-LiH-xMg(BH(4))(2) (0 ≤ x ≤ 2) were prepared by plasma metal reaction followed by a nucleation growth method. Highly reactive LiNH(2)-LiH hollow nanoparticles offered a favorable nucleus during a precipitation process of liquid Mg(BH(4))(2)·OEt(2). The electron microscopy results suggested that more than 90% of the obtained nano-composites were in the range 200-400 nm. Because of the short diffusion distance and ternary mixture self-catalyzing effect, this material possesses enhanced hydrogen (de)sorption attributes, including facile low-temperature kinetics, impure gases attenuation and partial reversibility. The optimal hydrogen storage properties were found at the composition of LiNH(2)-LiH-0.5Mg(BH(4))(2), which was tentatively attributed to a Li(4)(NH(2))(2)(BH(4))(2) intermediate. 5.3 wt% hydrogen desorption could be recorded at 150 °C, with the first 2.2 wt% release being reversible. This work suggests that controlled in situ hybridization combined with formula optimization can improve hydrogen storage properties.     

Scandium and yttrium metallocene borohydride complexes: comparisons of (BH4)1- vs. (BPh4)1- coordination and reactivity

The synthetically accessible borohydride complexes (C(5)Me(4)H)(2)Ln(THF)(BH(4)) and (C(5)Me(5))(2)Ln(THF)(BH(4)) (Ln = Sc, Y) were examined as precursors alternative to the heavily-used tetraphenylborate analogs, [(C(5)Me(4)H)(2)Ln][BPh(4)] and [(C(5)Me(5))(2)Ln][BPh(4)], employed in LnA(2)A'/M reduction reactions (A = anion; M = alkali metal) that generate "LnA(2)" reactivity and form reduced dinitrogen complexes [(C(5)R(5))(2)(THF)(x)Ln](2)(μ-η(2):η(2)-N(2)) (x = 0, 1). The crystal structures of the yttrium borohydrides, (C(5)Me(4)H)(2)Y(THF)(μ-H)(3)BH, 1, and (C(5)Me(5))(2)Y(THF)(μ-H)(2)BH(2), 2, were determined for comparison with those of the yttrium tetraphenylborates, [(C(5)Me(4)H)(2)Y][(μ-Ph)(2)BPh(2)], 3, and [(C(5)Me(5))(2)Y][(μ-Ph)(2)BPh(2)], 4. The complex (C(5)Me(4)H)(2)Sc(μ-H)(2)BH(2), 5, was synthesized and structurally characterized for comparison with (C(5)Me(5))(2)Sc(μ-H)(2)BH(2), 6, [(C(5)Me(4)H)(2)Sc][(μ-Ph)BPh(3)], 7, and [(C(5)Me(5))(2)Sc][(μ-Ph)BPh(3)], 8. Structural information was also obtained on the borohydride derivatives, (C(5)Me(4)H)(2)Sc(μ-H)(2)BC(8)H(14), 9, and (C(5)Me(5))(2)Sc(μ-H)(2)BC(8)H(14), 10, obtained from 9-borabicyclo(3.3.1)nonane (9-BBN) and (C(5)Me(4)R)(2)Sc(η(3)-C(3)H(5)), where R = H, 11; Me, 12. The preference of the metals for borohydride over tetraphenylborate binding was shown by the facile displacement of (BPh(4))(1-) in 3, 4, 7, and 8 by (BH(4))(1-) to make the respective borohydride complexes 1, 2, 5, and 6. These results are consistent with the fact that the borohydrides are not as useful as precursors in A(2)LnA'/M reductions of N(2). An unusual structural isomer of [(C(5)Me(4)H)(2)Sc](2)(μ-η(2):η(2)-N(2)), 13', was isolated from this study that shows the variations in ligand orientation that can occur in the solid state.     

Synthesis and characterization of methylammonium borohydride

A new borohydride, [CH(3)NH(3)](+)[BH(4)](-), has been synthesized through the metathesis of CH(3)NH(3)F and NaBH(4) in methylamine. Room-temperature X-ray diffraction studies have shown that [CH(3)NH(3)](+)[BH(4)](-) adopts a tetragonal unit cell with considerable hydrogen mobility similar to that observed in NH(3)BH(3). The kinetics and thermodynamics of hydrogen release have been investigated and were found to follow a similar pathway to that of [NH(4)](+)[BH(4)](-). Decomposition of [CH(3)NH(3)](+)[BH(4)](-) occurred slowly at room temperature and rapidly at ca. 40 °C to form [BH(2)(CH(3)NH(2))(2)](+)[BH(4)](-), the methylated analogue of the diammoniate of diborane. The decomposition has been investigated by means of in situ X-ray diffraction and solid state (11)B NMR spectroscopy and occurred in the absence of any detectable intermediates to form crystalline [BH(2)(CH(3)NH(2))(2)](+)[BH(4)](-). [(CH(3))(2)NH(2)](+)[BH(4)](-) and [BH(2){(CH(3))(2)NH}(2)](+)[BH(4)](-) have also been synthesized through analogous routes, indicating a more general applicability of the synthetic method.     

Sodium magnesium amidoborane: the first mixed-metal amidoborane

The first example of a mixed-metal amidoborane Na(2)Mg(NH(2)BH(3))(4) has been successfully synthesized. It forms an ordered arrangement in cation coordinations, i.e., Mg(2+) bonds solely to N(-) and Na(+) coordinates only with BH(3). Compared to ammonia borane and monometallic amidoboranes, Na(2)Mg(NH(2)BH(3))(4) can release 8.4 wt% pure hydrogen with significantly less toxic gases.     

Rhenium hydride/boron Lewis acid cocatalysis of alkene hydrogenations: activities comparable to those of precious metal systems

Dibromonitrosyl(dihydrogen)rhenium(I) complexes [ReBr(2)(NO)(PR(3))(2)(η(2)-H(2))] (1; R = iPr, a; Cy, b) and Me(2)NH·BH(3) (DMAB) catalyze at either 90 °C or ambient temperature under 10 bar of H(2) the hydrogenation of various terminal and cyclic alkenes (1-hexene, 1-octene, cyclooctene, styrene, 1,5-cyclooctadiene, 1,7-octadiene, α-methylstyrene). Maximum turnover frequency (TOF) values of 3.6 × 10(4) h(-1) at 90 °C and 1.7 × 10(4) h(-1) at 23 °C were achieved in the hydrogenation of 1-hexene. The extraordinary catalytic performance of the 1/DMAB system is attributed to the formation of five-coordinate rhenium(I) hydride complexes [Re(Br)(H)(NO)(PR(3))(2)] (2; R = iPr, a; Cy, b) and the action of the Lewis acid BH(3) originating from DMAB. The related 2/BH(3)·THF catalytic system also exhibits under the same conditions high activity in the hydrogenation of various alkenes with a maximum turnover number (TON) of 1.2 × 10(4) and a maximum TOF of 4.0 × 10(4) h(-1). For the hydrogenations of 1-hexene with 2a and 2b, the effect of the strength of the boron Lewis acid was studied, the acidity being in the following order: BCl(3) > BH(3) > BEt(3) ≈ BF(3) > B(C(6)F(5))(3) > BPh(3) ? B(OMe)(3). The order in catalytic activity was found to be B(C(6)F(5))(3) > BEt(3) ≈ BH(3)·THF > BPh(3) ? BF(3)·OEt(2) > B(OMe)(3) ? BCl(3). The stability of the catalytic systems was checked via TON vs time plots, which revealed the boron Lewis acids to cause an approximate inverse order with the Lewis acid strength: BPh(3) > BEt(3) ≈ BH(3)·THF > B(C(6)F(5))(3). For the 2a/BPh(3) system a maximum TON of 3.1 × 10(4) and for the 2a/B(C(6)F(5))(3) system a maximum TOF of 5.6 × 10(4) h(-1) were obtained in the hydrogenation of 1-hexene. On the basis of kinetic isotope effect determinations, H(2)/D(2) scrambling, halide exchange experiments, Lewis acid variations, and isomerization of terminal alkenes, an Osborn-type catalytic cycle is proposed with olefin before H(2) addition. The active rhenium(I) monohydride species is assumed to be formed via reversible bromide abstraction with the "cocatalytic" Lewis acid. Homogeneity of the hydrogenations was tested with filtration and mercury poisoning experiments. These "rhenium(I) hydride/boron Lewis acid" systems demonstrate catalytic activities comparable to those of Wilkinson- or Schrock-Osborn-type hydrogenations accomplished with precious metal catalysts.     

Raman spectroscopic study of crystallization from solutions containing MgSO4 and Na2SO4: Raman spectra of double salts

Mg(2+), Na(+), and SO(4)(2-) are common ions in natural systems, and they are usually found in water bodies. Precipitation processes have great importance in environmental studies because they may be part of complex natural cycles; natural formation of atmospheric particulate matter is just one case. In this work, Na(2)Mg(SO(4))(2)·5H(2)O (konyaite), Na(6)Mg(SO(4))(4) (vanthoffite), and Na(12)Mg(7)(SO(4))(13)·15H(2)O (loeweite) were synthesized and their Raman spectra reported. By slow vaporization (at 20 °C and relative humidity of 60-70%), crystallization experiments were performed within small droplets (diameter ≤ 1-2 mm) of solutions containing MgSO(4) and Na(2)SO(4), and crystal formations were studied by Raman spectroscopy. Crystallization of Na(2)Mg(SO(4))(2)·4H(2)O (bloedite) was observed, and the formation of salt mixtures was confirmed by Raman spectra. Bloedite, konyaite, and loeweite, as well as Na(2)SO(4) and MgSO(4)·6H(2)O, were the components found to occur in different proportions. No crystallization of Na(6)Mg(SO(4))(4) (vanthoffite) was observed under the crystallization condition used in this study.     

Ditopic hydridoborates and hydridoboranes: bridging ligands in coordination polymers and versatile hydroboration reagents

Single crystals of the meta- and para-phenylene-bridged ditopic trihydridoborates (Li(THF)(2))(2)[m-C(6)H(4)(BH(3))(2)] and (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)] have been prepared and investigated by X-ray crystallography. The compounds turned out to be coordination polymers in which each trihydridoborate substituent is connected with one trihydridoborate substituent of a neighbouring monomer via two bridging Li(THF)(2)(+) ions. (Li(THF)(2))(2)[m-C(6)H(4)(BH(3))(2)] and (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)] suffer from poor solubility in all common non-protic solvents. Thus, a more soluble derivative of (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)], equipped with n-hexyl groups at the positions 2 and 5 of the phenylene ring, has been used for all further investigations (i.e., compound Li(2)[6]). Treatment of Li(2)[6] with Me(3)SiCl in the presence of excess N(Me)(2)Et leads to the abstraction of one hydride ion per boron atom under formation of the ditopic amine-borane adduct p-C(6)H(2)(n-hexyl)(2)(BH(2)-N(Me)(2)Et)(2) (7). The compound turned out to be an efficient hydroboration reagent both for internal olefins (i.e., 1,5-cyclooctadiene) and terminal alkynes (i.e., tert-butyl acetylene) to give p-C(6)H(2)(n-hexyl)(2)(9-BBN)(2) (8; 9-BBN = 9-borabicyclo[3.3.1]nonyl) and p-C(6)H(2)(n-hexyl)(2)(B(C(H)=C(H)tBu)(2))(2) (9), respectively.