脉冲激光对类金刚石（DLC）薄膜的热冲击效应研究

强激光辐照红外热像系统时，可造成系统的干扰和破坏，激光的波长不同，对系统的破坏效果也不同.为了保护红外系统窗口以及提高窗口的透过率，红外窗口广泛沉淀类金刚石（DLC）薄膜.当入射的激光波长位于红外系统响应波段外时，激光对系统的破坏首先是激光对DLC薄膜的破坏.以波长为1.06μm的激光为例，研究了脉冲激光对DLC薄膜的损伤机理，建立了DLC薄膜的热冲击效应模型，并通过求解热传导和应力平衡方程，得出了薄膜的温度场和应力场分布.理论分析表明，热应力破坏在脉冲强激光对DLC膜的损伤机理中占主导地位.当 辐照能量密度为E₀=100mJ·cm^-2时，在薄膜表面距光斑中心约 40μm区域内的压应 力明显超出其断裂强度，将造成膜层的剥离、脱落.理论分析与实验结果基本相符，表明建 立热冲击效应模型的正确性. 关键词： 激光辐照 类金刚石（DLC）薄膜 热冲击效应     

CO2激光局域辐照对熔石英损伤特性的影响

研究了CO₂激光局域辐照对熔石英损伤特性的影响, 发现当辐照中心温度较低时(1139 K), 辐照对损伤阈值没有明显影响, 但辐照中心温度较高时(1638 K), 辐照对损伤阈值有明显的影响, 损伤阈值随距离辐照中心间距的增大而减小, 在残余应力产生光程差最大处附近, 损伤阈值降到最小, 随着与辐照中心间距的进一步增加, 损伤阈值略有上升. 对导致此现象的原因做了分析. 由于残余应力的存在, 在辐照中心发生再损伤产生的裂纹后, 裂纹先沿径向扩展, 在残余应力产生光程差最大处附近, 裂纹转而向切向扩展, 这可能与径向和环向张应力随半径的变化有关. 在采用热处理炉退火消除残余应力时, 必须注意元件的洁净处理, 否则退火会出现析晶现象, 对损伤阈值和透射率造成不良影响. 关键词： 2激光局域辐照')" href="#">CO₂激光局域辐照 熔石英 损伤特性     

不同沉积参量下ZrO2薄膜的微结构和激光损伤阈值

ZrO2采用X射线衍射(XRD)技术分析了不同充氧条件和沉积温度对ZrO2溥膜组成结构的影响,并对不同工艺下制备的薄膜的表面粗糙度和激光损伤阈值进行了测量。结果发现随着氧压的升高,ZrO2溥膜将由单斜相多晶态逐渐转变为非晶态结构,而随着基片温度的增加,溥膜将由非晶态逐渐转变为单斜相多晶态。同时发现随着氧压升高晶粒尺寸减小,而随着沉积温度增加,晶粒尺寸增大。氧压增加时工艺对表面粗糙度有一定程度的改善,而沉积温度升高,工艺对表面粗糙度的改善不明显。晶粒尺寸大小变化与表面粗糙度变化存在对应关系。激光损伤测量表明,氧压条件和沉积温度对ZrO2薄膜的抗激光损伤能力有着较大影响。     

考虑变井筒存储的三重介质凝析气井压力动态分析

基于Xu & Lee的凝析气井试井分析数学模型,采用Hegeman提出的井筒相再分布压力的误差函数表达式,建立考虑变井筒存储的三重介质凝析气井试井解释数学模型.通过Laplace变换和Stehfest数值反演进行求解,绘制其压力及压力导数曲线,并分析研究井筒相再分布压力系数等对压力和压力导数动态的影响.     

Effect of porosity on the laser induced damage threshold of porous anodic alumina films

Thermal stress of porous alumina films has been simulated by finite element method based on thermal transfer equation and thermal stress formulas. The influence of equivalent thermal conductivity and elastic modulus on laser induced damage threshold (LIDT) has been studied. It was found that the biggest circumferential tensile stress will be small with the porosity from 15% to 35%, and it effectively improves the LIDT. The equivalent thermal conductivity and LIDT decreases with the increase of porosity. The equivalent elastic modulus decreases and LIDT increase with the increase of porosity.     

High pressure-induced structural effects in plastic packaging

Today, flexible vacuum packages are predominantly used for products to be subjected to high pressure treatment. However, tray packages with a modified atmosphere are in demand, which provide a high failure rate with respect to gas and water vapour permeability and packaging integrity. Methods to follow permeation processes under high pressure were developed and used together with optical microscopy, confocal scanning laser microscopy, Raman spectroscopy and atomic force microscopy to identify the mechanisms for changes in permeability and damage to the packaging materials. Single film samples and pouch packages filled with model products were studied. Results indicate a reversible decrease in the coefficients of diffusion and permeation under the impact of high pressure, due to the compression of the polymeric bulk. Irreversible changes in the polymeric materials are associated with gases in the packaging head space, which cause high local temperatures and create damage due to rapid deliberation upon the pressure drop at the end of the high pressure cycle.     

无限流体中孔隙介质圆柱周向导波的传播特性

为研究无限大流体约束的孔隙圆柱中周向导波的传播规律,分析孔隙参数对导波传播特性的影响,建立了无限流体中孔隙介质圆柱的理论模型,利用孔隙介质弹性波动理论,建立了周向导波频散方程,通过数值模拟计算得到无限流体中孔隙介质圆柱的频散曲线,探讨了圆柱半径和孔隙参数对导波传播特性的影响,并对导波的衰减特性进行了分析;通过数值计算,得到了周向导波的时域波形,讨论了孔隙参数对波形的影响.结果表明,孔隙介质圆柱半径的改变影响圆柱尺度,孔隙度的改变影响孔隙介质中体声波的波速,都对周向导波频散曲线产生一定的影响,所得到的频散曲线特征及衰减曲线与时域波形吻合.研究结果对开展无限流体中孔隙介质圆柱的超声无损评价提供了一定的理论参考.     

K9玻璃在脉冲CO_2激光作用下的热应力分析

根据已建立的理论模型,计算得到了K9玻璃受脉冲CO_2激光辐照时产生的热应力分布,研究了热应力的时间特征,在分析样品尺寸对损伤结果影响的基础上,提出了K9玻璃抗激光损伤的最佳半径。结果表明:K9玻璃产生的热应力损伤主要由环向应力控制,热应力以热冲击波的形式在样品内传播,大小随时间变化而来回振荡,且激光脉冲结束后比激光作用时间内产生的热应力要大。这说明若样品在激光加热期间产生的热应力不足以造成材料破坏,则有可能会在其后的冷却过程中产生更大的热应力,材料将会在冷却过程中发生破裂。根据样品参数对损伤结果的影响,进一步验证了K9玻璃抗激光损伤最佳半径的通用性。     

Intrinsic stress analysis of sputtered carbon film

Intrinsic stresses of carbon films deposited by direct current （DC） magnetron sputtering were investigated. The bombardments of energetic particles during the growth of films were considered to be the main reason for compressive intrinsic stresses. The values of intrinsic stresses were determined by measuring the radius of curvature of substrates before and after film deposition. By varying argon pressure and target-substrate distance, energies of neutral carbon atoms impinging on the growing films were optimized to control the intrinsic stresses level. The stress evolution in carbon films as a function of film thickness was investigated and a void-related stress relief mechanism was proposed to interpret this evolution.     

激光等离子体效应对薄膜损伤特性的影响

高能激光的发展对光学元件的抗损伤能力要求越来越高,其中光学薄膜是最薄弱的环节之一。实验研究了激光的聚焦位置对石英基片上HfO2/SiO2减反射薄膜损伤形貌的影响,研究发现:激光等离子体的高压冲击波对薄膜产生强烈的冲击剥离效应,其压强随膨胀半径的增加而迅速减小。激光等离子体光谱的辐射波长小于入射激光波长,这会增强薄膜对辐射光能量的吸收;位于深紫外波段、能量大于HfO2薄膜带隙的光子能量,将被薄膜直接吸收,从而加剧薄膜的电离破坏。激光等离子体的辐射效应和冲击波效应的共同作用决定了薄膜的损伤形貌。当激光聚焦到薄膜表面时,冲击波压强极大会使薄膜发生大面积的电离去除,同时基底发生击穿;当两者距离大到一定距离时,冲击波只会使得中心处小面积薄膜发生剥离,基底未出现断裂。     

The pore opening process and its influence on conductivity measurements of irradiated polymer films by application of the electrochemical etching method

The technique of the electrochemical etching of irradiated polymer films is an useful method to investigate structures of the track cores.

The transversale etching rate as a function of the radius, derived from the time-dependence of the radius of the etching pore, can be interpreted as a corresponding magnitude of the degree of the damage within the track core.

In the case of polymer films irradiated by a high track density, the influence of the time distribution of the breakthroughs (pore opening process) of the etching microchannels on the conductivity changes during the etching process is to be discussed. First represented results lead to statements about the statistical nature of the pore opening process.     

He-Ne散射光检测光学薄膜激光损伤阈值

准确测定光学薄膜的激光损伤阈值可以衡量光学薄膜的抗激光损伤能力,测定损伤阈值的关键是准确地判定损伤的发生与否。建立了He-Ne散射光检测光学薄膜激光损伤阈值系统。通过测量同一样品点的He-Ne散射光能量变化来判断薄膜表面发生的损伤,并对制备的类金刚石薄膜与HfO₂/SiO₂反射膜进行了阈值测试。与等离子体闪光法的阈值测试结果进行比较,具有较好的一致性。分析表明：He-Ne散射光测试系统能有效地判断出激光诱导损伤,易于实现在线检测。     

含少量气泡流体饱和孔隙介质中的弹性波

考虑孔隙流体中含有少量气泡,且气泡在声波作用下线性振动,研究声波在这种孔隙介质中的传播特性.本文先由流体质量守恒方程和孔隙度微分与流体压力微分的关系推导出了含有气泡形式的渗流连续性方程;在处理渗流连续性方程中的气体体积分数时间导数时,应用Commander气泡线性振动理论导出气体体积分数时间导数与流体压强时间导数的关系,进而得到了修正的Biot形式的渗流连续性方程;最后结合Biot动力学方程求得了含气泡形式的位移场方程,便可得到两类纵波及一类横波的声学特性.通过对快、慢纵波的频散、衰减及两类波引起的流体位移与固体位移关系的考察,发现少量气泡的存在对快纵波和慢纵波的传播特性影响较大.     

Structural phase transformation in ZnS nanocrystalline thin films by swift heavy ion irradiation

Zinc sulfide (ZnS) thin films in zinc-blende (ZB) and wurtzite (W) phases have been fabricated by pulsed laser deposition. 150 MeV Ni ion beam irradiation has been carried out at different fluences ranging from 10¹¹ to 10¹³ ions/cm² at room temperature for ion induced modifications. Structural phase transformation in ZnS from W to ZB phase is observed after high energy ion irradiation which leads to the decrease in bandgap. Generation of high pressure and temperature by thermal spike during MeV ion irradiation along the ion trajectory in the films is responsible for the structural phase transformation.     

Equilibrium partitioning of a simple fluid in a matrix-filled cylindrical pores with adsorbing walls: A grand canonical Monte Carlo study

We have studied a model of a hard sphere fluid adsorbed in a cylindrical pore filled with quenched disordered matrix of hard sphere particles using Grand canonical Monte Carlo simulations. The interactions between matrix species and pore walls are assumed of a hard sphere type. However, the pore walls exert a short-range attraction upon adsorbed fluid particles. We discuss the adsorption isotherms and the density profiles of fluid particles in pores with different microporosity for several values of the pore radius. We have observed that like in homogeneous microporous media the adsorption increases with increasing porosity. However, trends of behavior of the isotherms also reflect layering of adsorbed fluid. The data obtained in this study may serve as a benchmark for the development of the theory of confined quenched-annealed systems and for computer simulation investigation of models permitting phase transitions in pores. This project has been supported in parts by DGAPA of the UNAM under research grant IN111597, by the National Council for Science and Technology (CONACyT), grant No. 25301-E.     

Structure and piezoelectric properties of microporous polyvinylidene fluoride films

A method to produce microporous polyvinylidene fluoride films characterized by a high content of a piezoactive crystalline phase and a developed relief surface is elaborated. The porous films are obtained in the process based on melt extrusion with subsequent isometric annealing and uniaxial extension. It is found that the samples have an oriented lamellar structure containing both α- and β-modifications of the crystallites. The effect of temperature and degree of uniaxial extention of the annealed films on the characteristics of the porous samples, that is, the content of the piezoactive crystalline β-phase, overall porosity, breakdown voltage and the piezoelectric modulus is studied.

     

冲击加载过程中苯的液—固相转变

利用一级轻气炮加载技术和最近发展的一种透光性测量技术,在线观测到液态苯在多次冲击压缩过程中透光性随时间变化特征.分析表明,导致透光性下降的原因是局部发生液—固相变而引起的光散射效应,且散射特征反映了相变过程的时间弛豫和空间积累特性.结果澄清了苯在冲击条件下液—固相变是否发生的争论,对冲击相变动力学研究提供了重要实验依据. 关键词： 苯 多次冲击压缩 液—固相变 透光性     

Molecular simulation of phase coexistence in adsorption in porous solids

In this work a recently proposed method, the gauge-cell Gibbs ensemble Monte Carlo, is extended to deal with polar substances. The behaviour of water, a hydrogen bonding, weakly adsorbing fluid, is compared with that of methane, a strongly adsorbing, non-polar fluid, in the vicinity of the phase transition. The mechanisms of condensation for the two species are seen to be significantly different in nature. A systematic study of the effect of the pore width on the phase equilibrium of water is also performed. Our results show that the narrowing of the pore shifts the equilibrium transition pressure to lower values and reduces the extent of vapour metastability, but exerts little influence on the stability of the liquid phase.     

川南龙马溪组页岩储层水相渗吸规律

基于川南龙马溪组页岩多重孔隙特征,建立渗吸解析模型,定量计算不同孔隙类型渗吸深度。在此基础之上,开展考虑页岩储层温度、围压、流体压力共同作用下的水相渗吸实验,分析页岩水相渗吸规律。结果表明：基于渗吸饱和度渗吸过程可分为3个阶段：渗吸扩散段、渗吸过渡段、渗吸平衡段,其中渗吸扩散段为渗吸能力主要贡献段。在焖井初期由于流体压力作用页岩渗吸能力大幅度提高,为后续自发渗吸作用提供了渗吸液体。储层围压对页岩渗吸能力有抑制作用,但仍能提高储层改造效果,孔隙度增加倍数范围为0.42倍~1.63倍,渗透率增加倍数范围为17.6倍~67.3倍。黏土孔渗吸深度远大于脆性矿物孔和有机质孔,粘土矿物为页岩水化作用诱导微裂缝主控因素。焖井有利于提高川南龙马溪组页岩储层改造效果。研究成果可为页岩气井返排制度优化提供依据。     

强激光干扰下运动目标热损伤效应的有限元研究

为对空中飞行目标实施合理有效的强激光干扰,需要综合考虑采用的干扰方式、干扰效果以及考虑光斑偏移对干扰效果的影响。以热传导理论为基础,建立了激光辐照下移动目标温度场模型,采用伽辽金法建立了有限元分析模型,采用了等效比热容的方法处理材料的相变过程;并以Ansys软件为仿真平台,对目标在高斯分布的强激光作用下的温度场和热应力进行了综合仿真分析。结果表明,光斑与目标辐照区域的相对偏移对目标表面温度影响较大,对目标纵深破坏效应相对较小,应力变化主要发生在激光辐照区域,应力最大处也会随热源的移动而变化。