169 MHz repetition frequency all-fiber passively mode-locked erbium doped fiber laser

Passively mode-locked stretched-pulse erbium fiber laser is presented. With all-fiber configuration 111 fs pulses were achieved with the fundamental repetition rate of 169 MHz and an average output power of more than 30 mW. Proposed setup shows excellent stability, reliability and ‘turn-key’ operation. The impact of the pump power on laser parameters is described.     

High-energy mode-locked all-fiber laser with ultralong resonator

The first experimental results on an all-fiber mode-locked ytterbium laser whose ultralong cavity has a length of 8 km are presented. An increase in the length of the laser cavity at a constant mean power of radiation makes it possible to increase the pulse energy by more than two orders of magnitude to a level of 4 μJ, which is record-high for the pulses generated by a fiber mode-locked master oscillator in the absence of Q-switching. A pulse repetition rate of 37 kHz is the record-low repetition rate for the mode-locked lasers. The numerical simulation of the lasing in the absence of extension fiber yields a possibility of a wide-range variation in the pulse duration due to the tuning of the intracavity polarization controllers. The simulation results are in qualitative agreement with the experimental data.     

High-energy soliton pulse generation with a passively mode-locked Er/Yb-doped multifilament-core fiber laser

We report the generation of high-energy short pulses from a mode-locked erbium/ytterbium-doped large-mode-area multifilament-core fiber laser operating in the purely anomalous dispersion regime. The self-starting fiber laser emits 400 mW of average output power at a pulse repetition rate of 44 MHz, corresponding to a pulse energy of 9.1 nJ. The laser produces near transform-limited output pulses with pulse duration of 1.6 ps, corresponding to 5 kW peak power. This new type of low-nonlinearity fibers demonstrates the power and energy scaling potential of fiber-based short pulse lasers in the eye-safe region.     

High-energy femtosecond Yb-doped all-fiber monolithic chirped-pulse amplifier at repetition rate of 1 MHz

A high-energy femtosecond all ytterbium fiber amplifier based on a chirped-pulse amplification(CPA) technique at a repetition rate of 1 MHz seeded by a dispersion-management mode-locked picosecond broadband oscillator is studied.We find that the compressed pulse duration is dependent on the amplified energy,the pulse duration of 804 fs corresponds to the maximum amplified energy of 10.5 μJ,while the shortest pulse duration of 424 fs corresponds to the amplified energy of 6.75 μJ.The measured energy fluctuation is approximately 0.46% root mean square(RMS) over 2 h.The low-cost femtosecond fiber laser source with super-stability will be widely used in industrial micromachines,medical therapy,and scientific studies.     

超低频率全正色散半导体可饱和吸收镜被动锁模光纤激光器

通过延长激光器环形腔腔长,利用高浓度掺杂的单模掺镱光纤,搭建了超低重复频率、全正色散结构的半导体可饱和吸收镜被动锁模光纤激光器。激光器的中心波长、重复频率、平均功率及单脉冲能量分别为1 064 nm,281.5 kHz,11 mW和39 nJ。为了稳定中心波长,实现自启动,激光器腔体内接入了一个带通滤波器。该激光器运行稳定,无调Q不稳定现象,极大减小了半导体可饱和吸收镜被损坏的机会。     

全光纤高功率被动锁模掺铥光纤激光器

利用非线性光环形镜（NOLM）的可饱和吸收特性实现了可自启动的2 m全光纤高能量被动锁模掺铥光纤激光器。当泵浦功率大于3 W时,激光器工作在连续或不稳定脉冲运转状态;泵浦功率达到4.69 W后,输出为自启动锁模脉冲,重复频率4.26 MHz,中心波长2 061.5 nm,光谱半极大宽度18.1 nm,平均输出功率8.8 mW;继续增加泵浦功率到最大值7.56 W,可以得到中心波长2 062.2 nm、光谱半极大宽度17.1 nm、斜率效率为6.2%、脉冲宽度和能量分别为424 fs和65.6 nJ的稳定锁模脉冲。这是目前已报道的在未经放大情况下脉冲能量最高的2 m锁模脉冲光纤激光器。     

超低频率全正色散半导体可饱和吸收镜被动锁模光纤激光器

 通过延长激光器环形腔腔长,利用高浓度掺杂的单模掺镱光纤,搭建了超低重复频率、全正色散结构的半导体可饱和吸收镜被动锁模光纤激光器。激光器的中心波长、重复频率、平均功率及单脉冲能量分别为1 064 nm,281.5 kHz,11 mW和39 nJ。为了稳定中心波长,实现自启动,激光器腔体内接入了一个带通滤波器。该激光器运行稳定,无调Q不稳定现象,极大减小了半导体可饱和吸收镜被损坏的机会。     

Bound soliton pulses in passively mode-locked fiber laser

A passively mode-locked soliton fiber ring laser was successfully demonstrated, and bound soliton pulses with an FWHM pulsewidth of 326 fs and fixed separation of 938 fs were first observed. The number of bound soliton pairs in the cavity can be controlled under lower pump power. The transmission effects were investigated by injecting bound soliton pulses into a single mode fiber.     

Bidirectional passively mode-locked soliton fiber laser with a four-port circulator

We present an all-fiber bidirectional passively mode-locked soliton laser with what we believe is a novel cavity configuration. Using a four-port circulator, we incorporate two different semiconductor saturable absorber mirrors (SESAMs) into the laser cavity, which enables bidirectional mode locking. The laser allows the generation of two independent countercirculating mode-locked pulse trains, each with an individual fundamental repetition rate that can be adjusted by varying the SESAM pigtail length. Two countercirculating pulse trains with repetition rates of 21.3 and 15.2 MHz are obtained simultaneously. By controlling the intracavity loss imposed on these two pulse trains, either one of the two pulse trains can be switched on or off. The bidirectional operation with other repetition rates is also demonstrated.     

全正色散多波长被动锁模耗散孤子掺镱光纤激光器

报道了一种带有周期性双折射光纤滤波器的全正色散多波长被动锁模耗散孤子掺镱光纤激光器. 通过数值模拟发现加入滤波器后激光器能输出多波长耗散孤子脉冲, 调节滤波器带宽大小可以得到不同波长个数和波长间隔的多波长锁模耗散孤子脉冲. 在激光器产生的四波长和五波长耗散孤子脉冲中观察到了耗散孤子分子, 并且通过调节滤波器参数和饱和功率可以改变多波长脉冲中耗散孤子分子的个数和波长. 这是在被动锁模光纤激光器中首次实现包含有耗散孤子分子的多波长脉冲. 另外还在实验上实现了全正色散双波长被动锁模耗散孤子的产生. 关键词： 全正色散 耗散孤子 多波长脉冲 孤子分子     

Pulse-train nonuniformity in an all-fiber ring laser passively mode-locked by nonlinear polarization rotation

This paper reports the periodic power variation of the pulse-train in a passively mode-locked soliton fiber ring laser. It can obtain either the uniform or nonuniform pulse-train output by simply rotating the polarization controllers. The experimental results show that the pulse-train nonuniformity is caused by the interaction between the nonuniform polarization states of the soliton pulses and the passive polarizer in the cavity.     

Dissipative soliton resonance in a passively mode-locked fiber laser

The phenomenon of dissipative soliton resonance (DSR) predicts that an increase of pulse energy by orders of magnitude can be obtained in laser oscillators. Here, we prove that DSR is achievable in a realistic ring laser cavity using nonlinear polarization evolution as the mode-locking mechanism, whose nonlinear transmission function is adjusted through a set of waveplates and a passive polarizer. The governing model accounts explicitly for the arbitrary orientations of the waveplates and the polarizer, as well as the gain saturation in the amplifying medium. It is shown that DSR is achievable with realistic laser settings. Our findings provide an excellent design tool for optimizing the mode-locking performance and the enhancement of energy delivered per pulse by orders of magnitude.     

Bound soliton pulses in a passively mode-locked fibre ring laser

The bound solitons in a passively mode-locked fibre ring laser are observed and their formation mechanism is summarized in this paper. In order to obtain stable bound solitons, a strong CW laser field at the centre of the soliton spectral is necessary to suppress and synchronize the random soliton phase variations.     

Chaotic dynamics of a passively mode-locked soliton fiber ring laser

We report on the experimental and numerical studies of the chaotic dynamics of a soliton fiber ring laser passively mode-locked by using the nonlinear polarization rotation (NPR) technique. Period-doubling route to chaos on the soliton repetition rate of either the single pulse soliton or the bound solitons of the laser was experimentally observed. Based on a coupled complex Ginzburg-Landau equation model and also taking into account the laser cavity effect, we further show numerically that the period-doubling bifurcations and route to chaos are intrinsic properties of the laser, whose appearance is independent of the details of the laser cavity design and the laser soliton operation. Property of the solitons under the dynamical bifurcations is also numerically investigated.     

2 MHz repetition rate, 200 ps pulse duration from a monolithic,passively Q-switched microchip laser

We present a monolithic passively Q-switched microchip laser generating 200 ps pulses at a wavelength of 1064 nm with a repetition rate of up to 2 MHz. While maintaining transversal and longitudinal single-mode operation, the pulse energy can be changed from 130 nJ to 400 nJ by varying the pump conditions of the laser. To the best of our knowledge, the repetition rate of 2 MHz is by far the highest ever reported from such lasers operating in the sub-ns regime.     

All-fiber passively mode-locked laser oscillator at 1.5 microm with watts-level average output power and high repetition rate

We report on a passively mode-locked all-fiber laser oscillator at 1.5 microm based on heavily doped phosphate-glass active fiber. An active fiber only 20 cm long is sufficient to produce as much as 2.4 W of average output power directly from the oscillator. The width of the mode-locked pulses varies from 8 ps at the lowest output power in the mode-locked state to 44 ps at the highest power. Our picosecond laser oscillator features a high repetition rate of 95 MHz and high peak pulse power of approximately 540 W. The oscillator combines the convenience of all-fiber construction with power performance that was previously achievable only with mode-locked bulk-optic laser oscillators or more complex systems involving fiber amplifiers.     

Regimes of operation states in passively mode-locked fiber soliton ring laser

The principal of passively mode-locked fiber soliton ring lasers is summarized, including its three output operation states: normal soliton, bound–solitons and noise-like pulse. The experimental results of the passively mode-locked fiber soliton ring lasers developed by us are given. Bound–solitons with different discrete separations and three-bound–solitons state have been observed in our fiber laser for the first time. The relationship among three operation states in fiber soliton laser is analyzed.     

High power diode-pumped passively mode-locked Nd:YVO_4 laser at repetition rate of 3.2 GHz

A compact high power diode-pumped passively mode-locked Nd:YVO_4 laser with high repetition rate is realized.Using an Nd:YVO_4 crystal and a semiconductor saturable absorber mirror(SESAM) in the oscillator, the picosecond pulse output with an average power of 1.38 W, a repetition rate of 3.24 GHz, and a pulse duration of 11.4 ps is achieved. After one stage of amplification, the final output power reaches 11.34 W, corresponding to a total optical-to-optical efficiency of about 32%. The root mean square(RMS) value of power fluctuation is demonstrated to be less than 0.6% in 24 hours,showing a superior stability with the compact configuration.     

A mode-locked external-cavity quantum-dot laser with a variable repetition rate

A mode-locked external-cavity laser emitting at 1.17-μm wavelength using an InAs/GaAs quantum-dot gain medium and a discrete semiconductor saturable absorber mirror is demonstrated. By changing the external-cavity length, repetition rates of 854, 912, and 969 MHz are achieved respectively. The narrowest -3-dB radio-frequency linewidth obtained is 38 kHz, indicating that the laser is under stable mode-locking operation.     

Passively mode-locked Raman fiber laser with 100 GHz repetition rate

We experimentally demonstrate the operation of a passively mode-locked Raman fiber ring laser with an ultrahigh repetition rate of 100 GHz and up to 430 mW of average output power. This laser constitutes a simple wavelength versatile pulsed optical source. Stable mode locking is based on dissipative four-wave mixing with a single fiber Bragg grating acting as the mode-locking element.