Negative index photonic crystal lenses based on carbon nanotube arrays

We report a novel utilization of periodic arrays of carbon nanotubes in the realization of diffractive photonic crystal lenses. Carbon nanotube arrays with nanoscale dimensions (lattice constant 400 nm and tube radius 50 nm) displayed a negative refractive index in the optical regime where the wavelength is of the order of array spacing. A detailed computational analysis of band gaps and optical transmission through the nanotubes based planar, convex and concave shaped lenses was performed. Due to the negative-index these lenses behaved in an opposite fashion compared to their conventional counter parts. A plano-concave lens was established and numerically tested, displaying ultra-small focal length of 1.5 μm (～2.3 λ) and a near diffraction-limited spot size of 400 nm (～0.61 λ).     

Broadband super-collimation with low-symmetric photonic crystal

We investigate dispersive properties of two dimensional photonic crystal (PC) called star-shaped PC (STAR-PC) in order to succeed super-collimation over a broad bandwidth. Both time- and frequency-domain numerical methods are conducted. Due to introduced low-symmetry in the primitive cell, flat contours are observed at the fifth band for transverse magnetic mode. The proposed structure supports a super-collimation effect over a broad wavelength range between 1443 nm and 1701 nm with a bandwidth of Δω = 16.42%. The intrinsic characteristic of STAR-PC provides in-plane beam propagation with a limited diffraction length of 120a, where a is the lattice constant. By means of STAR-PC, one may realize super-collimation based single-mode optical devices with a low insertion loss, reduced dispersion and wide bandwidth.     

Experimental verification of enhanced electromagnetic field intensities at the photonic stop band edge of 3D polystyrene photonic crystals using Z-Scan technique

Enhancement of nonlinear absorption of polystyrene (PS) was investigated using 3D PS photonic crystals (PCs) with Z-scan technique. The Z-scan experiment was carried out at 532 nm in the picosecond (ps) regime. The transmittance of the PC was found to get modified because of the nonlinear absorption of PS particularly when 532 nm is near the photonic stop band (PSB) edge of PC. Calculations show that the field gets enhanced by 1.4 times the input field intensity within the crystal when the 532 nm wavelength falls at the PSB edge while keeping the crystal at an angle of 35°.     

Transmission characteristics simulation of an erbium-doped lithium niobate film photonic crystal slab

A photonic crystal slab (PhC slab) which was constructed as a 2D hexagonal lattice with a finite depth was etched into an Er:LiNbO₃ film waveguide. The band diagrams and transmission spectra were simulated by plane wave expansion (PWE) and the finite-difference time-domain (FDTD) method. A high refractive index contrast of 0.5 enables strong light confinement in the vertical direction and a broad band gap. The simulated transmittance spectra indicate that the stop band is determined by lattice constant. The transmission spectra along ΓM of the PhC slab with a lattice constant 500 nm show a 250-nm broad stop band in the wavelength range from 1.33 to 1.58 μm and sharp band edge.     

Novel ultracompact wavelength division demultiplexer based on photonic band gap

We propose ultra-compact wavelength division demultiplexer based on photonic band gap in two dimensional photonic crystals. The structure consists of two different types of lattice, which can separate two communication wavelengths, 1310 and 1490 nm. In addition, it also can be used to separate the wavelengths of 1310 and 1550 nm if we change the structural parameters. The total size of the present structure is only 12.5 μm × 12.5 μm. The transmission efficiency is above 97%, and the good performance is verified with plane wave expansion and finite-difference time-domain simulation.     

Shape analysis of wavelength-insensitive grating in the resonance domain

A triangular grating was compared with a rectangular one to investigate the effect of the shape, polarization and wavelength on the transmissivity and the diffraction angle distribution. The rigorous coupled-wave analysis (RCWA) and the nonstandard finite-difference time-domain (NS-FDTD) algorithm were used for the calculation. We found that the triangular grating in TE mode had the least wavelength dependence in the resonance domain, and this was explained by two independent parameters—(depth/wavelength) and (diffraction order × wavelength / period), whose ratio of the contribution to the diffraction efficiency equation was dependent on grating shape and polarization.     

Tunable dual-wavelength fiber laser based on an opto-VLSI processor and four-wave mixing in a photonic crystal fiber

A stable wavelength and wavelength spacing tunable dual-wavelength fiber laser based on an Opto-very-large-scale-integration (Opto-VLSI) processor and four-wave mixing (FWM) in a high-nonlinear photonic crystal fiber is experimentally demonstrated. The results show that the line width of the tunable dual-wavelength fiber laser is 0.02 nm, and the wavelength spacing can be tuned from 0.8 nm to 4 nm with a 0.15 nm step. Under the influence of the FWM, the uniformity is below 0.6 dB and the measured side mode suppression ratio (SMSR) is above 45 dB.     

Reflective plasmonic waveplates based on metal–insulator–metal subwavelength rectangular annular arrays

We propose and present a quarter-wave plate using metal–insulator–metal (MIM) structure with sub-wavelength rectangular annular arrays (RAA) patterned in the upper Au film. It is found that by manipulating asymmetric width of the annular gaps along two orthogonal directions, the reflected amplitude and phase of the two orthogonal components can be well controlled via the RAA metasurface tuned by the MIM cavity effect, in which the localized surface plasmon resonance dip can be flattened with the cavity length. A quarter-wave plate has been realized through an optimized design at 1.55 μm, in which the phase difference variation of less than 2% of the π/2 between the two orthogonal components can be obtained in an ultra-wide wavelength range of about 130 nm, and the reflectivity is up to ∼90% within the whole working wavelength band. It provides a great potential for applications in advanced nanophotonic devices and integrated photonic systems.     

Extraordinary wavelength dependence of self-collimation effect in photonic crystal with low structural symmetry

We present the optical properties of a new type of photonic crystal (PC) named star-shaped PC (STAR-PC) with anomalous equi-frequency contours. Intentionally introducing low-symmetry in the primitive unit cell gives rise to progressively tilting flat contours, which are observed in the fifth band of the transverse magnetic mode. Due to the intrinsic dispersive feature of the proposed PCs, i.e. tilted self-collimation, the incident signal with different wavelengths can be successfully separated in a spatial domain without introducing any corrugations or complexities inside the structure. We show numerical investigations of wavelength selective characteristic of the proposed PC structure in both time and frequency domains. The STAR-PC approach can be considered a good candidate for the wavelength division applications in the design of compact photonic integrated circuits. For the purpose of wavelength separation implementations, the proposed structure may operate within the wavelength interval of 1484.5–1621.5 nm with a broad bandwidth of 8.82%. The corresponding inter-channel crosstalk value is as low as ?19 dB and the calculated transmission efficiency is above 97%.     

High spatial resolution imaging in a clipping Kagomé lattice photonic crystal

In this paper, a two-dimensional Kagomé lattice photonic crystal (PC) made of GaAs (ɛ = 12.96) dielectric rods in air is considered. This Kagomé lattice PC has an effective refractive index n_eff = −1 at a low normalized frequency ω = 0.187 × 2πc/a. Imaging quality and the capability of the super-resolution of two point sources are studied for a superlens made of such PC structure. In order to achieve a high quality image and to improve the spatial super-resolution of two sources, a clipping Kagomé lattice PC is designed. Results simulated by finite-difference time-domain method show that imaging quality and super-resolution of two sources can be enhanced greatly as the perfect Kagomé lattice structure are superseded by the clipping Kagomé lattice structure. Coupled-mode theory analysis gives an explanation why the clipping structure is superior to the perfect one for both the imaging quality and the capability of the super-resolution of two sources. This clipping Kagomé lattice PC structure would be widely used in optical devices and integrated circuit.     

Compact WDM demultiplexer for seven channels in photonic crystal

We demonstrate a new device concept for wavelength division demultiplexing based on planar photonic crystal waveguides. The filtering of wavelength channels is realized by shifting the cutoff frequency of the fundamental photonic bandgap mode in consecutive sections of the waveguide. The shift is realized by modifying the size of the border holes.The proposed demultiplexer has an area equal to (16.5 μm × 6.5 μm) and thus it is verified that this structure is very small and can be integrated easily into optical integrated circuits with nanophotonic technologies. The output wavelengths of designed structure can be tuned for communication applications, around 1550 nm. The wavelengths of demultiplexer channels are λ₁ = 1.590 μm, λ₂ = 1.566 μm, λ₃ = 1.525 μm, λ₄ = 1.510 μm, λ₅ = 1.484 μm, λ₆ = 1.450 μm, λ₇ = 1.400 μm respectively. Designs offering improvement of number of the separate wavelengths (seven), miniaturization of the structure (107.25 μm²) is our aim in this work.In our structure, we consider that the 2D triangular lattice photonic crystal is composed of air holes surrounded by dielectric. Its parameters are: radius of holes (r = 0.130 μm), lattice constant (a = 0.380 μm), and index of membrane (n = 3.181:InP). The numerical model used to simulate the structure of the demultiplexer is based on the finite difference time domain (FDTD).     

Tunable multi-wavelength fiber laser based on a polarization-maintaining erbium-doped fiber and a polarization controller

A stable and tunable multi-wavelength fiber laser with a polarization-maintaining erbium-doped fiber (PM-EDF) and a polarization controller (PC) is proposed and demonstrated. A homemade PM-EDF incorporated in the ring cavity is used as the gain medium. Simultaneous multi-wavelength oscillation is achieved at room temperature. The theory of the PM-EDF and PC to suppress the wavelength competition is described in detail. The 3 dB bandwidth is less than 0.01 nm. The power fluctuation and wavelength shift are measured to be less than 0.5 dB and 0.05 nm over 32 min. The wavelength tuning between single-, double-, triple-, and four-wavelength is realized.     

Design of a compact polarization splitter based on the dual-elliptical-core photonic crystal fiber

We propose a compact polarization splitter based on dual-elliptical-core photonic crystal fiber. Two elliptical cores are introduced to increase the difference of effective index between x-polarized and y-polarized mode and three elliptical modulation air holes are used to control the power transfer between the two cores. By optimizing the structure parameters, the length of the polarization splitter is distinctly shortened. Numerical results demonstrate that the compact splitter has the length of 775 μm and up to 50 dB extinction ratio at the central wavelength of 1.55 μm. The corresponding bandwidth of 32 nm could be achieved from the wavelength of 1.534–1.566 μm with the extinction ratio over 20 dB     

Multi-wavelength bismuth-based erbium-doped fiber laser based on four-wave mixing effect in photonic crystal fiber

A stable multi-wavelength erbium-doped fiber laser based on four-wave mixing (FWM) in a photonic crystal fiber (PCF) is demonstrated in this paper. The phase matching condition for four-wave mixing in the photonic crystal fiber has been enhanced using a seed signal and a polarisation controller to control the states of polarisation in the ring laser cavity. At a maximum pump power of 1480 nm, 5 lines are observed with nearly 2.15 nm spacing between the lines, and with a signal to noise ratio of more than 20 dB. The number of channels and wavelength spacing can be controlled by varying the output coupler ratio.     

Design,optimization and fabrication of 2D photonic crystals for solar cells

This paper presents the optimization of 2D photonic crystals (PCs) onto Si wafers to improve the performance of c-Si PV cells. The objective is to find a structure capable of minimizing the reflectance of the Si wafer in the spectral range between 400 nm and 1000 nm. The study has been limited to PCs that can be fabricated and characterized with the tools and technology available and to dimensions in the same order as the visible light wavelength. PCs with different shapes and dimensions have been simulated and finally the optimum structure has been fabricated by a process based on laser interference lithography (LIL) and reactive ion etching (RIE). This optimized PC presents an average reflectance of 3.6% in the selected wavelength range, without any other material used as antireflective coating. This result means a drastic reduction in comparison with reflectance obtained out of the standard wet etch texturization used in current solar cell manufacturing lines.     

CdSe/PMMA: Plastic fiber material containing CdSe quantum dots

An optical gain plastic, CdSe/PMMA, poly-methyl methacrylate doped with CdSe quantum dot (QD), is reported in this study. With a narrow size distribution of the QD prepared by organic synthesis, the measured results show that the photoluminescence (PL) peak intensity is enhanced by ～2.5 times, FWHM broadened by ～10 nm, and the PL peak wavelength blue shifted by ～25 nm in the CdSe/PMMA compared with plain CdSe QD. Under continuous irradiation of 473-nm laser, the PL peak intensity is positively correlated with time within the first hour after the samples are fabricated, but gradually stabilizes afterward. The obtained results suggest that the CdSe/PMMA material reported here is a desirable optical gain plastic. Potential applications include high gain wideband fiber amplifiers or other photonic devices in the future due to its high flexibility, low weight and low cost.     

Real-space observation of photonic nanojet in dielectric microspheres

The three-dimensional real-space observation of photonic nanojet in different microspheres illuminated by a laser is reported. The finite-difference time-domain technique is used to perform the three-dimensional numerical simulation for the dielectric microspheres. The key parameters of photonic nanojet are measured by using a scanning optical microscope system. We reconstruct the three-dimensional real-space photonic nanojets from the collected stack of scanning images for polystyrene microspheres of 3 μm, 5 μm, and 8 μm diameters deposited on a glass substrate. Experimental results are compared to calculations and are found in good agreement with simulation results. The full width at half-maximum of the nanojet is 331 nm for a 3 μm microsphere at an incident wavelength of 633 nm. Our investigations show that photonic nanojets can be efficiently imaged by a microsphere and straightforwardly extended to rapidly distinguish the nano-objects in the far-field optical system.     

QWIP focal plane arrays on InP substrates for single and dual band thermal imagers

Alternative material systems on InP substrate provide certain advantages for mid-wavelength infrared (MWIR), long-wavelength infrared (LWIR) and dual band MWIR/LWIR quantum well infrared photodetector (QWIP) focal plane arrays (FPAs). While InP/InGaAs and InP/InGaAsP LWIR QWIPs provide much higher responsivity when compared to the AlGaAs/GaAs QWIPs, AlInAs/InGaAs system facilitates completely lattice matched single band MWIR and dual band MWIR/LWIR FPAs.We present an extensive review of the studies on InP based single and dual band QWIPs. While reviewing the characteristics of InP/InGaAs and InP/InGaAsP LWIR QWIPs at large format FPA level, we experimentally demonstrate that the cut-off wavelength of AlInAs/InGaAs QWIPs can be tuned in a sufficiently large range in the MWIR atmospheric window by only changing the quantum well (QW) width at the lattice matched composition. The cut-off wavelength can be shifted up to ～5.0 μm with a QW width of 22 Å in which case very broad spectral response (Δλ/λ_p = ～30%) and a reasonably high peak detectivity are achievable leading to a noise equivalent temperature difference as low as 14 mK (f/2) with 25 μm pitch in a 640 × 512 FPA. We also present the characteristics of InP based two-stack QWIPs with wavelengths properly tuned in the MWIR and LWIR bands for dual color detection. The results clearly demonstrate that InP based material systems display high potential for dual band MWIR/LWIR QWIP FPAs needed by third generation thermal imagers.     

Performance analysis of an eight channel demultiplexer using a 2D-photonic crystal quasi square ring resonator

Recent years, the design of photonic crystal (PC) based optical devices is receiving keen interest in research and scientific community. In this paper, two dimensional (2D) PC based eight channel demultiplexer is proposed and designed and the functional characteristics of demultiplexer namely resonant wavelength, transmission efficiency, quality factor, spectral width, channel spacing and crosstalk are investigated. The demultiplexer is designed to drop the wavelength centred at 1537.6 nm, 1538.5 nm, 1539.4 nm, 1540.4 nm, 1541.2 nm, 1541.9 nm, 1542.6 nm and 1543.1 nm. The proposed demultiplexer is primarily composed of bus waveguide, drop waveguide and quasi square ring resonator. The quasi square ring resonator and square ring micro cavity (inner rods) are playing a vital role for a desired channel selection. The operating range of the devices is identified through a photonic band gap (PBG) which is obtained using a plane wave expansion (PWE) method. The functional characteristics of the proposed demultiplexer are attained using a 2D finite difference time domain (FDTD) method. The proposed device offers low crosstalk and high transmission efficiency with ultra-compact size, hence, it is highly desirable for DWDM applications.