Synthesis,crystal growth and characterization of a semiorganic material: Calcium dibromide bis(glycine) tetrahydrate

Single crystals of semiorganic material calcium dibromide bis(glycine) tetrahydrate were grown from aqueous solution. The crystal belongs to monoclinic system, with a = 13.261(5) Å, b = 6.792(2) Å, c = 15.671(9) Å and β = 91.68(4)°. The presence of the elements in the title compound was confirmed by energy dispersive X-ray analysis. The solubility and metastable zone width were found. The grown crystals were tested by powder XRD, FTIR, Thermo Gravimetric and Differential Thermal Analysis, UV–vis–NIR analysis, dielectrical and mechanical studies. The transmittance of calcium dibromide bis(glycine) tetrahydrate crystal has been used to calculate the refractive index n, the extinction coefficient K and both the real ɛ_r and imaginary ɛ_i components of the dielectric constant as functions of wavelength. The optical band gap of calcium dibromide bis(glycine) tetrahydrate is 3.23 eV.     

Structural and vibrational properties of PVT grown Bi2Te3 microcrystals

High-quality Bi₂Te₃ microcrystals have been grown by physical vapor transport (PVT) method without using a foreign transport agent. The microcrystals grown under optimal temperature gradient are well facetted and they have dimensions up to ～100 μm. The phase composition of grown crystals has been identified by X-ray single crystal structure analysis in space group R3?m, a=4.3896(2) Å, b=30.5019(10) Å, Z=3 (R=0.0271). Raman microspectrometry has been used to describe the vibration parameters of Bi₂Te₃ microcrystals. The FWHM parameters obtained for representative Raman lines at 61 cm^?1 and 101 cm^?1 are as low as 3.5 cm^?1 and 4.5 cm^?1, respectively.     

Experimental and theoretical studies on bis(glycine) lithium nitrate (BGLiN): A physico-chemical approach

Good quality and bulk size single crystal (size: 20×13×8 mm³) of bis(glycine) lithium nitrate (BGLiN) was grown by a slow evaporation solution technique from the aqueous solutions at constant temperature i.e. 27 °C using synthesized materials. Crystal system and lattice parameters were determined by single crystals as well as powder X-ray diffraction analysis. The lattice parameters of the titled compound are a=10.0223 Å, b=5.0343 Å, c=17.0510 Å, and V=860.312 Å³ and it crystallized in an orthorhombic system with space group Pca2₁ obtained by single crystal XRD. Elemental composition was confirmed by energy dispersive X-ray spectroscopic analysis. Optical absorption spectrum was recorded and various optical parameters such as optical transmission (~60%), and optical band gap (4.998 eV) were calculated. Photoluminescence study shows that the grown crystal is free from major defects. Crystalline perfection of the grown crystal was assessed and found good. Ground state optimized geometry has been obtained by using DFT with 6-31G(d,p) basis set. HOMO and LUMO energy gap was found to be 6.01 eV and dipole moment was 1.65 D.     

Synthesis,growth and characterization of a semiorganic nonlinear optical single crystal: L-Valine cadmium bromide

A semiorganic nonlinear optical material L-valine cadmium bromide was synthesized and single crystal grown from an aqueous solution by the method of slow evaporation technique at room temperature. The grown crystal was characterized by Powder X-ray diffraction and FT IR studies. The LVCB crystallizes in monoclinic system with cell parameters a = 10.144(2) Å, b = 5.54(1) Å, c = 12.07(2) Å, β = 109.115(2)° with space group P₂₁. Thermal behavior and stability of crystal were studied using thermogravimetric analyses (TGA) and differential thermal analysis (DTA) techniques. The suitability of this material for NLO application was studied by optical absorption studies and second harmonic generation (SHG) efficiency measurement by Kurtz–Perry powder method.     

Synthesis and growth of sodium bitartrate monohydrate a new organometallic nonlinear optical single crystal

Sodium bitartrate monohydrate (SBTMH) a new organometallic nonlinear optical material, with molecular formula, [C₄H₅NaO₆ · H₂O] has been synthesized at ambient temperature. Spectral, thermal and optical techniques have been employed to characterize the new material. Bulk single crystals of size 13 × 4 × 4 mm³ of SBTMH have been grown by slow cooling method. The unit cell parameters of the grown crystal were determined by single crystal XRD. Functional groups present in the sample were identified by FTIR spectral analysis. Thermal stability of SBTMH was determined using TGA/DTA. The grown crystals exhibit nonlinear properties. The dielectric response of the crystal with varying frequencies was studied. The optical transparency range and the lower cut-off wavelength of the material were identified from the UV–vis–NIR absorption spectrum.     

Crystal growth and characterization of a new co-ordination complex—barium tetrakis(maleate) dihydrate

Crystals of barium tetrakis(maleate) dihydrate [Ba₄(C₄H₂O₄)₄]^?2H₂O are grown in gelated hydrosilica matrix. Single crystal X-ray diffraction studies show that the crystal system is monoclinic with space group P2₁/c. The unit cell dimensions are a=9.3721(2)  Å, b=20.5880(7)  Å, c=14.0744(4) Å, α=γ=90°, β=90.289(2)°. Powder XRD studies confirmed the single phase nature of the grown crystals. The FTIR data is in conformity with the XRD results. The TG–DTA curves of the material indicate a three-step thermal decomposition. The response of the dielectric properties in the temperature range 30 °C to 500 °C is correlated with the TG–DTA results.     

Structural,optical, thermal and mechanical characterization of an organic nonlinear optical material: 4-methyl-3-nitrobenzoic acid single crystal

Organic single crystals of 4-methyl-3-nitrobenzoic acid (4M3N) have been grown by slow evaporation solution growth technique at room temperature. The single crystal X-ray diffraction study reveals that 4M3N crystallizes in monoclinic system with space group P21/n. The crystalline perfection of the crystal was analyzed by high resolution X-ray diffraction (HRXRD) measurements. The functional groups present in 4M3N have been identified from FT-IR and FT-Raman spectra. The lower cut-off wavelength of 4M3N is found to be 404 nm and the optical band gap is calculated as 2.91 eV. The refractive index shows normal behavior with wavelength. The physio chemical changes, decomposition and stability of the 4M3N compound were established by TG-DTA studies. Vickers microhardness measurement concludes that 4M3N belongs to soft material (n=2.5) category. The LDT value is found to be higher than that of KDP and some of the important organic NLO materials. The third order nonlinear refractive index and nonlinear absorption coefficient of the 4M3N have been measured by Z-scan studies. The imaginary and real parts of the third-order susceptibility values were determined as Im χ³=9.129×10⁻¹¹ esu and Re χ³=1.4034×10⁻⁹ esu respectively. The dislocation density was calculated to be 3.0448×10⁶ cm⁻² which indicates the quality of the crystal.     

Optical spectroscopy and laser parameters of Zn2+/Er3+/Yb3+-tridoped LiNbO3 crystal

The Zn/Er/Yb:LiNbO₃ and Er/Yb:LiNbO₃ crystals were grown by the Czochralski technique. The laser characteristics of 1.54 μm emission were predicted based on the Judd–Ofelt theory, and the intensity parameters Ω_t (Ω₂=7.23×10^?20 cm², Ω₄=3.15×10^?20 cm² and Ω₆=1.43×10^?20 cm²) were obtained. The stimulated emission cross sections (σ_em) at 1.54 μm emission in Zn/Er/Yb:LiNbO₃ were calculated based on the McCumber theory and the Füchtbauer–Ladenburg theory. The gain cross section spectrum of Zn/Er/Yb:LiNbO₃ crystal was also investigated. Under 980 nm excitation, a lenghthening lifetime of 1.54 μm emission and an enhancement of green upconversion emission were observed for Zn/Er/Yb:LiNbO₃ crystal. The studies on the power pump dependence and the upconversion mechanism suggested that both green and red upconversion emissions were populated via the three-photon process, and Zn²⁺ ion tridoping increases the probability of cross relaxation process between the two neighboring Er³⁺ ions.     

Optical and dielectric studies of solution grown glycinium maleate single crystal

Bulk single crystals of glycinium maleate have been grown from aqueous solution by slow evaporation method by optimizing the growth parameters within a period of 15 days. From X-ray diffraction analysis, the crystal was found to crystallize in monoclinic structure (space group C_2/c) with a = 17.866 Å, b = 5.684 Å, c = 17.408 Å and β = 112.65°. Presence of characteristic functional groups was confirmed in FTIR analysis. UV–Vis spectral analysis has revealed the absence of any high absorbance region between the wavelengths ranging from 300 to 900 nm. The optical band gap was calculated and found to be 3.91 eV. The activation energy for conduction at different frequencies was calculated and found to decrease from 0.54 eV to 0.41 eV as frequency increased from 100 Hz to 2 MHz. The dielectric behavior, conduction mechanism and the optical characterization of the glycinium maleate single crystals are being reported for the first time.     

Growth and characterization of pure and doped bis thiourea zinc acetate: Semiorganic nonlinear optical single crystals

Metal–organic coordination complex single crystals bis thiourea zinc acetate (BTZA) and Cd²⁺ doped BTZA have been synthesized and grown successfully by slow-cooling technique from their aqueous solutions. Single crystals of pure and Cd²⁺ doped BTZA with dimensions of 35 × 4 × 2 mm³ and 10 × 5 × 6 mm³, respectively were obtained with well defined morphology. The as grown single crystals are characterized by single crystal XRD studies and melting point measurements which reveal the incorporation of metallic dopants has not changed the structure of the parent crystal. The powder X-ray diffractogram of the grown crystals has been recorded and the various planes of reflection identified shows shift in the peak positions. The metal coordination with thiourea through sulphur in pure and Cd²⁺ doped BTZA were ascertained by FTIR studies and optical absorption study to identify the UV cut-off range. The presence of metals in pure and Cd²⁺ doped BTZA crystal lattice were confirmed by atomic absorption spectroscopy (AAS). The thermal decomposition of pure and Cd²⁺ doped BTZA crystals were investigated by thermo gravimetric analyses (TGA) and differential thermal analysis (DTA) indicate that doped crystals are more stable than pure crystals. The dielectric response of the crystals were studied in the frequency range 100 Hz–5 MHz at different temperatures and the results are discussed. Second harmonic generation (SHG) measurement confirms that the pure and Cd²⁺ doped BTZA have nonlinear optical (NLO) property. Laser damage threshold value of 12.44 MW/cm² has been determined using Q-switched Nd:YAG laser operating at 1064 nm and with 8 ns pulses in single shot mode for pure BTZA single crystal is reported for the first time.     

Linear and nonlinear optical properties of N-(3-nitrophenyl) acetamide single crystals

Optically transparent nonlinear optical bulk single crystal of N-(3-nitrophenyl) acetamide (3NAA) of dimension 7 mm × 6 mm × 5 mm has been grown from its aqueous solution by slow solvent evaporation technique. The grown crystal was characterized by powder X-ray diffraction to confirm the crystal structure. Investigation has been carried out to assign the vibrational frequencies of the grown crystals by Fourier Transform Infrared Spectroscopy and FT-NMR technique. Thermal behaviour of the grown crystals was studied by thermogravimetric analysis. The second harmonic generation efficiency of 3NAA was determined by Kurtz and Perry powder technique. The optical absorption study confirms the suitability of the crystal for device applications. The mechanical properties of the grown crystals have been studied using Vickers microhardness tester. Dielectric, microhardness and photoconductivity studies also carried out for the grown sample.     

Crystal growth and structural properties of the spinel-type Li1 + xMn2 − xO4 (x = 0.10, 0.14)

Single crystals of the lithium-rich lithium manganese oxide spinels Li_1 + xMn_2 − xO₄ with x = 0.10 and 0.14 have been successfully synthesized in high-temperature molten chlorides at 1023 K. The single-crystal X-ray diffraction study confirmed the cubic Fd3¯m space group and the lattice parameters of a = 8.2401(9) Å for x = 0.10 and a = 8.2273(10) Å for x = 0.14 at 300 K, respectively. The crystal structures have been refined to the conventional values R = 3.7% for x = 0.10 and R = 3.1% for x = 0.14, respectively. Low-temperature single-crystal X-ray diffraction experiments revealed that these single crystal samples showed no phase transition between 100 and 300 K. The electron-density distribution images in these compounds by the single-crystal MEM analysis clearly showed strong covalent bonding features between the Mn and O atoms due to the Mn–3d and O–2p interaction.     

Adsorption of chlorine on Ru(0001)—A combined density functional theory and quantitative low energy electron diffraction study

Chlorine adsorption on Ru(0001) surface has been studied by a combined density functional theory (DFT) and quantitative low energy electron diffraction (LEED) approach. The (√3 × √3)R30°-Cl phase with Θ_Cl = 1/3 ML and chlorine sitting in fcc sites has been identified by DFT calculations as the most stable chlorine adsorbate structure on Ru(0001) with an adsorption energy of ? 220 kJ/mol. The atomic geometry of (√3 × √3)R30°-Cl was determined by quantitative LEED. The achieved agreement between experimental and simulated LEED data is quantified by a Pendry factor of r_P = 0.19 for a fcc adsorption site with a Cl-Ru bond length of 2.52 Å. At chlorine coverages beyond 1/3 ML LEED reveals diffuse diffraction rings, indicating a continuous compression of the hexagonal Cl overlayer with a preferred average Cl–Cl distance of 4.7 Å in the (√3 × √3)R30°-Cl, Θ_Cl = 1/3 ML phase towards 3.9 Å at saturation coverage of 0.48 ML.     

Growth,structure and physical properties of single crystals of pure and Pb-doped Bi-based high Tc superconductors

Single crystals of (Bi_1−xPb_x)₂Sr₂Ca₂Cu₃O_10+δ (x = 0 and 0.16) (sizes up to 3 × 2 × 0.1 mm³) have been grown by means of a newly developed “vapour-assisted travelling solvent floating zone” technique (VA-TSFZ). Post-annealing under high pressure of O₂ (up to 10 MPa at T = 500 °C) was applied to enhance T_c (up to 111 K) and improve the homogeneity of the crystals (ΔT_c ⩽ 1 K). The structure of both Pb-free and Pb-doped Bi-2223 was refined for the first time from single crystal X-ray diffraction (XRD) data. The unit cell of the average structure is pseudo-tetragonal with a = 5.4210(7), b = 5.4133(6) and c = 37.010(7) Å, and a = 5.395(1), b = 5.413(1) and c = 37.042(11) Å, for the Pb-free and the Pb-doped phase, respectively. An incommensurate modulation in the direction of one of the short cell vectors has been defined (q ∼ 0.21 a¹), however, the structure can be conveniently described in a supercell with a fivefold volume (a = 27.105(4) Å). With respect to the “non-modulated” structure, one additional oxygen atom for ten initial O was found to be inserted into the BiO layers. The superconducting anisotropy of Bi-2223 was found to be ∼50, from measurements of the lower critical field. The anisotropy of Bi-2223 is significantly reduced compared to that of Bi-2212, and this accounts for the enhanced irreversibility fields in Bi-2223. Furthermore, Bi-2223 has a higher critical current density, and a reduced magnetic relaxation rate compared to Bi-2212, which are both signatures of more effective pinning in Bi-2223 due to its reduced anisotropy.     

Interfacial reactions of Ba2YCu3O6+z with coated conductor buffer layer,LaMnO3

Chemical interactions between the Ba₂YCu₃O_6+x superconductor and the LaMnO₃ buffer layers employed in coated conductors have been investigated experimentally by determining the phases formed in the Ba₂YCu₃O_6+x–LaMnO₃ system. The Ba₂YCu₃O_6+x–LaMnO₃ join within the BaO–(Y₂O₃–La₂O₃)–MnO₂–CuO_x multi-component system is non-binary. At 810 °C (p_O2 = 100 Pa) and at 950 °C in purified air, four phases are consistently present along the join, namely, Ba_2?x(La_1+x?yY_y)Cu₃O_6+z, Ba(Y_2?xLa_x)CuO₅, (La_1?xY_x)MnO₃, (La,Y)Mn₂O₅. The crystal chemistry and crystallography of Ba(Y_2?xLa_x)CuO₅ and (La_1?xY_x)Mn₂O₅ were studied using the X-ray Rietveld refinement technique. The Y-rich and La-rich solid solution limits for Ba(Y_2?xLa_x)CuO₅ are Ba(Y_1.8La_0.2)CuO₅ and Ba(Y_0.1La_1.9)CuO₅, respectively. The structure of Ba(Y_1.8La_0.2)CuO₅ is Pnma (No. 62), a = 12.2161(5) Å, b = 5.6690(2) Å, c = 7.1468(3) Å, V = 494.94(4) Å³, and D_x = 6.29 g cm^?3. YMn₂O₅ and LaMn₂O₅ do not form solid solution at 810 °C (p_O2 = 100 Pa) or at 950 °C (in air). The structure of YMn₂O₅ was confirmed to be Pbam (No. 55), a = 7.27832(14) Å, b = 8.46707(14) Å, c = 5.66495(10) Å, and V = 349.108(14) Å³. A reference X-ray pattern was prepared for YMn₂O₅.     

Growth,structural, optical and mechanical studies on acid mixed glycine metal salt (GABN) crystal as potential NLO material

Transparent crystals of α-glycine with ammonium nitrate and barium nitrate (GABN) have been grown from aqueous solution by slow evaporation technique at room temperature. Crystals of size 11 × 7 × 4 mm³ have been obtained in about 3–4 weeks time. The solubility of GABN has been determined in water. The grown crystal belongs to orthorhombic system with cell parameters a = 7.317 A.U, b = 12.154 A.U and c = 5.468 A.U with a unit cell volume 486.35 (A.U)³. The presence of chemical components/groups has been identified by CHN, EDAX and NMR analysis. Comparative IR and Raman studies indicate a molecule with a lack of centre of symmetry. A wide transparency window useful for optoelectronic applications is indicated by the UV Studies. Using a Nd-YAG laser (1064 nm), the optical second harmonic generation (SHG) conversion efficiency of GABN is found to be 1.406 times of that of standard KDP. On exposure to light the GABN crystals are found to exhibit negative photoconductivity. I–V characteristics, SEM studies, dielectrics studies, and Vickers micro hardness measurement have been carried out.     

Novel polymeric potassium complex: Its synthesis,structural characterization,photoluminescence and electrochemical properties

In this paper, we obtained a novel poly(vanillinato potassium) complex (PVP) as a single crystal and characterized by analytical and spectroscopic methods. A single crystal of the PVP was obtained from the acetone solution. X-ray structural data show that crystals contain polymeric K⁺ complex of vanillin. Each potassium ion in the polymeric structure is identical and seven-coordinate, bonded to two methoxy, two phenoxy and three aldehyde oxygen atoms from four vaniline molecules. Two aldehyde oxygen atoms are bridging between potassium ions. It crystallizes in the monoclinic system, space group P2₁/c, with lattice parameters a=9.6215(10) Å, b=17.4139(19) Å, c=9.6119(10) Å, β=100.457(2)° and Z=4. Thermal properties of the PVP were investigated by TGA, DTA and DSC methods. The electrochemical properties of the complex were studied in different solvents and at various scan rates. The luminescence properties of the complex in different solvents and at different pH values have been investigated. The results show that the complex exhibits more efficient luminescence property in CH₃CN and n-butanol.     

Structural and magnetic properties of thin epitaxial Fe films on (1 1 0) GaAs prepared by metalorganic chemical vapor deposition

Iron films have been grown on (1 1 0) GaAs substrates by atmospheric pressure metalorganic chemical vapor deposition at substrate temperatures (T_s) between 135°C and 400°C. X-ray diffraction (XRD) analysis showed that the Fe films grown at T_s between 200°C and 330°C were single crystals. Amorphous films were observed at T_s below 200°C and it was not possible to deposit films at T_s above 330°C. The full-width at half-maximum of the rocking curves showed that crystalline qualities were improved at T_s above 270°C. Single crystalline Fe films grown at different substrate temperature showed different structural behaviors in XRD measurements. Iron films grown at T_s between 200°C and 300°C showed bulk α-Fe like behavior regardless of film thickness (100–6400 Å). Meanwhile, Fe films grown at 330°C (144 and 300 Å) showed a biaxially compressed strain between substrate and epilayer, resulting in an expanded inter-planar spacing along the growth direction. Magnetization measurements showed that Fe films (>200 Å) grown at 280°C and 330°C were ferromagnetic with the in-plane easy axis along the [1 1 0] direction. For the thinner Fe films (⩽200 Å) regardless of growth temperature, square loops along the [1 0 0] easy axis were very weak and broad.     

Proton conduction in LaSrScO3 single crystals

Transparent single crystals of La_1−xSr_xScO₃ (x = 0.01, 0.03) were grown by the floating zone method. The optical and the electrical properties were studied by infrared absorption spectra and AC-impedance measurements, respectively. Our results showed that proton conduction becomes dominant in La_0.97Sr_0.03ScO₃ single crystals below 700 °C. The electrical conductivity increases as the amount of Sr increases. At 600 °C, La_0.97Sr_0.03ScO₃ had a proton conductivity of 4.89 × 10^− 3 S/cm. This value is almost the same as that in the literature for La_0.9Sr_0.1ScO₃ ceramic samples. It was revealed from infrared absorption spectra that several different sites are occupied by protons in this material. Furthermore, it was found that the intensity of high-frequency O–H bands can be related to the dopant-concentration dependence of the electrical conductivity.     

Structural,vibrational study and superprotonic behavior of a new mixed dipotassium hydrogenselenate dihydrogenphosphate K2(HSeO4)1.5(H2PO4)0.5

Ongoing studies of the KHSeO₄–KH₂PO₄ system aiming at developing novel proton conducting solids resulted in the new compound K₂(HSeO₄)_1.5(H₂PO₄)_0.5 (dipotassium hydrogenselenate dihydrogenphosphate). The crystals were prepared by a slow evaporation of an aqueous solution at room temperature. The structural properties of the crystals were characterized by single-crystal X-ray analysis: K₂(HSeO₄)_1.5(H₂PO₄)_0.5 (denoted KHSeP) crystallizes in the space group P 1¯ with the lattice parameters: a = 7.417(3) Å, b = 7.668(2) Å, c = 7.744(5) Å, α = 71.59(3)°, β = 87.71(4)° and γ = 86.04(6)°. This structure is characterized by HSeO₄⁻ and disordered (H_xSe/P)O₄⁻ tetrahedra connected to dimers via hydrogen bridges. These dimers are linked and stabilized by additional hydrogen bonds (O–H–O) and hydrogen bridges (O–H…O) to build chains of dimers which are parallel to the [0, 1, 0] direction at the position x = 0.5.The differential scanning calorimetry diagram showed two anomalies at 493 and 563 K. These transitions were also characterized by optical birefringence, impedance and modulus spectroscopy techniques. The conductivity relaxation parameters of the proton conductors in this compound were determined in a wide temperature range. The transport properties in this material are assumed to be due to H⁺ protons hopping mechanism.