Entanglement and photon statistics of output fields from beam splitter for binomial state inputs

The entanglement properties are investigated based on linear entropy, and nonclassicalities are examined of output fields from a beam splitter for pure binomial state inputs. It is shown that the properties of the entanglement and the photon statistics of output fields are not only strongly dependent on the parameters of input binomial states but also quite involved with the nature of the beam splitter. The best entanglement can be obtained when the parameters of both input states and the beam splitter are chosen appropriately. Finally, we analyse briefly the distinguishability between the joint input state and the joint output state.     

Design of an all-optical switch and arbitrary proportion of energy output beam splitter

Based on the Kerr effect of photonic crystal, we design a simple structure of all-optical switch, which can be controlled by the pump intensity. At the same time, the structure can also realize the free control of energy output. It has low insertion loss and crosstalk. Numerical simulation results embody its high efficiency.     

一种全光开关及任意比能量输出光分束器的设计

基于光子晶体非线性Kerr效应设计了一种结构简单的任意比能量输出光分束器, 通过控制抽运光的强度来控制端口能量输出比. 该结构还可以实现控制光传输的动态开关作用, 并且具有插入损耗低、无串扰、信号光的开/关两个状态下的透射率相差非常大的特点, 因此该光开关具有很高的开关比. 关键词： 全光开关 光分束器 非线性Kerr效应 光子晶体     

Five-port beam splitter of a single-groove grating

A single-groove grating for five-port TE-polarization beam splitting under normal incidence at the wavelength of 1550 nm is presented. The transmitted diffraction efficiency of the gratings is over 94.5% with uniformity better than 2%. A physical view of diffraction inside the grating is presented by the simplified modal method(SMM).Initial parameters of the grating profiles are obtained by use of SMM and then optimized by employing rigorous coupled-wave analysis and the simulated annealing algorithm.     

Optical realization of a quantum beam splitter

We show how the quantum process of splitting light may be modeled in classical optics. A second result is the possibility to engineer specific forms of a classical field.     

Optimal quantum cloning on a beam splitter

We demonstrate how a beam splitter in combination with different light sources can be used as an optimal universal 1-->2 quantum cloner and as an optimal universal quantum NOT machine for the polarization qubit of a single photon. For the cloning a source of single photons with maximally mixed polarization is required and for the NOT operation a source of maximally entangled photon pairs. We demonstrate both operations with near optimal fidelity. Our scheme can be generalized in a natural way to clone and NOT the spin state of electrons.     

The design of a polarizing beam splitter made from a dielectric rectangular-groove grating

It has been reported that a polarizing beam splitter based on a rectangular-groove grating (a grating polarizing beam splitter) can be easily designed for specific applications using the modal method. In this paper, the eigenvalue equation of the modal method is transformed to a new form. Using this new form of the eigenvalue equation, it is shown that the design of a grating polarizing beam splitter can be independent of the incident wavelength. The period and the groove depth can be designed using values normalized to the incident wavelength, which apply to a range of wavelengths as long as the effects of dispersion can be neglected. Numerical simulations of fused silica gratings are presented and analyzed. It is concluded that the preferable choice for the grating period is 0.8–0.9 times the incident wavelength.     

Full counting statistics of a superconducting beam splitter

We study the statistics of charge transport in a mesoscopic three-terminal device with one superconducting terminal and two normal-metal terminals. We calculate the full distribution of transmitted charges into the two symmetrically biased normal terminals. In a wide parameter range, we find large positive cross correlations between the currents in the two normal arms. We also determine the third cumulant that provides additional information on the statistics not contained in the current noise.     

Atomic beam splitter from a mixture of atoms in the Bragg regime

We investigate the interaction of a standing-wave light field with the beam of two-level atoms moving in the Bragg regime. The atomic beam consists of two different isotopes and the density is sufficiently small so that at most one atom is inside the cavity at any time. The experimental setup is such that both the isotopes have the same momenta. The momentum transfer between the atoms and photons in the process essentially effects the center-of-mass motion of the atoms, thus separating the isotopes in different directions after specific interaction times.     

Polarizing beam splitter of a deep-etched fused-silica grating

We described a highly efficient polarizing beam splitter (PBS) of a deep-etched binary-phase fused-silica grating, where TE- and TM-polarized waves are mainly diffracted in the -1st and 0th orders, respectively. To achieve a high extinction ratio and diffraction efficiency, the grating depth and period are optimized by using rigorous coupled-wave analysis, which can be well explained based on the modal method with effective indices of the modes for TE/TM polarization. Holographic recording technology and inductively coupled plasma etching are employed to fabricate the fused-silica PBS grating. Experimental results of diffraction efficiencies approaching 80% for a TE-polarized wave in the -1st order and more than 85% for a TM-polarized wave in the 0th order were obtained at a wavelength of 1550 nm. Because of its compact structure and simple fabrication process, which is suitable for mass reproduction, a deep-etched fused-silica grating as a PBS should be a useful device for practical applications.     

Diffractive beam splitter characterization via a power-recycled interferometer

We used the high-precision laser interferometer technique of power recycling to characterize the optical loss of an all-reflective grating beam splitter. This beam splitter was used to set up a Michelson interferometer with a power-recycling resonator with a finesse of 883. Analyzing the results obtained, we determined the beam splitter's total optical loss to be (0.193+/-0.019)%. Low loss all-reflective beam splitters might find application in future high-power laser interferometers for the detection of gravitational waves.     

Experimental demonstration of a controllable electrostatic molecular beam splitter

We experimentally demonstrate a controllable electrostatic beam splitter for guided ND3 molecules with a single Y-shaped charged wire and a homogeneous bias field generated by a charged metallic parallel-plate capacitor. We study the dependences of the splitting ratio R of the guided ND3 beam and its relative guiding efficiency η on the voltage difference between two output arms of the splitter. The influences of the molecular velocity v and the cutting position L on the splitting ratio R are investigated as well, and the guiding and splitting dynamic processes of cold molecules are simulated. Our study shows that the splitting ratio R of our splitter can be conveniently adjusted from 10% to 90% by changing ΔU from -6 kV to +6 kV, and the simulated results are consistent with our experimental ones.     

近红外消偏振分光膜设计近红外消偏振分光膜设计

大角度倾斜入射时,光学薄膜表现出强烈的偏振效应。入射光S分量和P分量的反射率和透射率曲线,以及反射或透射引起的两个分量的相位变化都不再相同,彼此有一定的偏振分离。通过对产生偏振效应内在原因的分析,采用一个在近红外波段对于45倾斜入射光的S分量和P分量等效导纳非常接近的膜系结构,结合单纯形法优化算法,设计得到一个1 500～1 600 nm范围内反射率都是50％的近红外消偏振分光膜。结果显示,在45入射时,S分量和P分量的反射率曲线偏振分离小,反射和透射引起的相位变化也控制在很小范围。     

Transparency induced by two-photon interference in a beam splitter

We propose a special two-photon state which is completely transparent in a 50/50 beam splitter. This effect is caused by the destructive two-photon interference and shows the signature of photon entanglement. We find that the symmetry of the two-photon spectrum plays the key role for the properties of two-photon interference.     

Polarizing beam splitter based on a double-layer subwavelength grating

A Si–ZnS double-layer subwavelength grating is theoretically used as a high-efficient polarizing beam splitter. To design this structure, the rigorous coupled-wave analysis (RCWA) is applied to study the reflectivity and transmissivity for the TE and TM polarization, respectively. Simulation results show that both the zero-order reflection for TE polarization and the zero-order transmission for TM polarization can exceed 90% in a wide tunable working incident angle range from 48° to 72°. Moreover, the proposed polarizing beam splitter has a working wavelength that is in the range of 1500–1600 nm.     

Positive cross correlations in a normal-conducting fermionic beam splitter

We investigate a beam-splitter experiment implemented in a normal-conducting fermionic electron gas in the quantum Hall regime. The cross correlations between the current fluctuations in the two exit leads of the three terminal device are found to be negative, zero, or even positive, depending on the scattering mechanism within the device. Reversal of the cross correlation sign occurs due to interaction between different edge states and does not reflect the statistics of the fermionic particles which "antibunch."     

Polarization beam splitter based on a photonic crystal heterostructure

The design and characterization of a photonic crystal (PC) polarization beam splitter (PBS) that operates with an extinction ratio of greater than 15 dB for both polarizations are presented. The PBS is fabricated on a silicon-on-insulator (SOI) wafer where the input and output ports consist of 5 mum wide ridge waveguides. A large spectral shift is observed in the dispersion plots of the lowest-order even (TE-like) and odd (TM-like) modes due to the SOI confinement. Because of this shift, the TE-like mode is close to a directional gap at the top of the band, and the TM-like mode is in a low-frequency regime where the dispersion surface is almost isotropic. We show that the TE-like mode has very high reflection at the interface between the two PCs, whereas the TM-like mode exhibits a very high transmission.     

Polarization beam splitter using a binary blazed grating coupler

A novel polarization beam splitter using a two-layer grating coupler is proposed and demonstrated. It can directly couple the normally incident light from fiber into two separate waveguides according to their polarization states while splitting them. It realizes high coupling efficiency and a good extinction ratio by using binary blazed grating couplers. The coupling length is less than 14 microm. The extinction ratio is better than 20 dB for both polarizations over a 40 nm wavelength range, and the coupling efficiencies for the two layers are 58% and 50%.