Microfibrillated cellulose with sizing for reinforcing composites with LDPE

Microfibrillated cellulose (MFC) fibers were acylated by the sizing agent, alkenyl succinic anhydride (ASA) reagent in an aqueous medium, by simple impregnation. The chemical modification was confirmed by Fourier transform infrared spectroscopy and solid-state ¹³C NMR. All the samples were combined with low-density polyethylene and the morphology, thermal properties, mechanical properties and water absorption behavior of the ensuing composites were investigated. The chemical modification of the MFC with ASA improved the interfacial adhesion with the matrix and hence the mechanical properties of the composites while decreasing their water uptake capacity. In addition, it was shown that the degree of substitution strongly influenced the performance of the composites.     

Renal function study with 111In-DTPA--in comparison with 99mTc-DTPA

Technetium-99m-diethylene-triamine-penta-acetic acid (DTPA) and 111In-DTPA were injected simultaneously into 21 patients with various levels of renal function. Scintiphoto, camera data renograms and clearance values (plasma sampling) were obtained for each patient. The mixed isotope scintiphoto images were of intermediate quality and the images with 111In-DTPA were apparently inferior to those with 99mTc-DTPA. These equations were obtained: (1) y = 0.30 + 0.91 x (coefficient of correlation r = 0.98) where x is the value at T peak (time of maximum count on renogram) obtained with 99mTc-DTPA and where y is the value at T peak with 111In-DTPA. (2) y = -0.09 + 1.006 x (r = 0.99) where x is the value at T3/4 (time interval between the time of maximum count to the time of 3/4 of maximum count on renogram) and where y is the value at T3/4 obtained with 111In-DTPA. (3) y = -0.01 + 1.007 x (r = 0.98) where the x and y values were for the excretion ratios (counts at 20 min/maximum counts on renogram). (4) y = 0.81 + 0.98 x (r = 0.99) where x and y are the clearance values.     

Reactions of indole derivatives with cardioprotective activity with reactive oxygen species. Comparison with melatonin

We have previously reported on the synthesis of novel indole derivatives containing an amine-triazole moiety (1a-d, 2a-c), and their antioxidant activity on in vitro non-enzymatic rat hepatic microsomal lipid peroxidation. Some of the compounds showed protective activity against oxidative injury of ischemic myocardium. In the present paper we investigated the interactions of these derivatives with reactive oxygen species, in order to find a mechanism of their antioxidant capacity and to identify structural characteristics responsible for these properties. These interactions were compared with melatonin, which is also an indole derivative. The antioxidant profiles of the compounds were established by different in vitro protocols as follows: 1) by the interaction of the compounds with the 1,1-diphenyl-2-picrylhydrazyl (DPPH) stable free radical, 2) their scavenging effects on superoxide anions using an enzymic system of xanthine-xanthine oxidase, 3) their inhibitory effects on xanthine oxidase and 4) their ability to scavenge hydroxyl radicals by comparison with dimethyl sulfoxide (DMSO) for *OH. All compounds were found to interact with DPPH, most of them to be superoxide anion scavengers and to be strong hydroxyl radical scavengers. Derivatives 1a and 1d substituted on the nitrogen of the indolic nucleus were found to have better antioxidant properties than the reference compounds used and melatonin.     

Copolymerizations of 2-hydroxyethylmethacrylate with vinylpyridines and with N-substituted methacrylamides

Studies were made of the copolymerizations of 2-hydroxyethylmethacrylate with 2-, 3- and 4-vinylpyridine. N-(trans-4′-nitro-4-stilbenyl)methacrylamide and N-(trans-4-stilbenyl)methacrylamide. Methods of Fineman-Ross, Joshi-Joshi, Tidwell-Mortimer and Tosi were employed to determine monomer reactivity ratios; the results for 2- and 4-vinylpyridine were compared with those calculated from the Q-e scheme. The monomer reactivity ratios for 2-hydroxyethylmethacrylate with vinylpyridines calculated by different methods showed good agreement. The monomer reactivity is briefly discussed.     

LC Coupled with TOFMS for Metabonomics Study of Mini-pigs with Atherosclerosis

In this study, serum metabolic profiles of mini-pigs with atherosclerosis (AS) were analyzed by LC–TOFMS. Partial least-squares to latent structure-discriminant analysis and orthogonal projection to latent structure-discriminant analysis were used for group differentiation and selection of potential biomarkers. The mini-pig disease models were constructed by feeding a high-fat diet and inducing coronary injury, in accordance with the mechanism of AS pathogenesis. To characterize the development of AS, serum samples were collected and analyzed at two time points (two and ten weeks). Separate distinct clustering of results from normal and model mini-pigs could be observed for both the two and ten-week samples. With the development of AS, the metabolism of the model mini-pigs was more substantially disturbed. Major metabolites contributing to the discrimination were fatty acids, lysophosphatidylcholines, and bile acids. These potential biomarkers are related with inflammation, oxidative stress, and abnormal lipid and energy metabolism.

     

Ferrocenes with perfluorinated side chains and ferrocenophanes with fluorinated handles

Trifluorovinyl groups are introduced onto the cyclopentadienyl ligands of ferrocene at the 1-, 1,1'-, and 1,2-positions by Negishi-type and Stille-type coupling reactions of trifluorovinylzinc chloride and tri-n-butyltrifluorovinyl stannane with several iodoferrocenes. Modification of the trifluorovinyl group by nucleophilic substitution and [2+2] cycloaddition make them versatile building blocks for synthetic transformations. 1,1'-Bis(trifluorovinyl) ferrocene reacts upon contact with silica or oxidizing agents and in the presence of a suitable nucleophile through a redox autocatalytic mechanism to afford ferrocenophanes with fluorinated handles. C(F)(H) and C(F)(OMe) moieties in α-positions allowed further modifications to be performed by nucleophilic substitution of the fluorine atoms. A series of ferrocenes with fluorinated side chains and ferrocenophanes with fluorinated handles were isolated and characterized. Several molecular structures were determined by single-crystal X-ray diffraction. The influence of the fluorine substituents on the redox properties of the iron center were studied by cyclic voltammetry.     

Fluorescence chemosensors with pyrene and their interaction with nucleotide phosphate

A group of fluorescence chemosensor with pyrene, compounds (Ⅰ), (Ⅱ) and (Ⅲ), were synthesized The fluorescence spectra and the lifetime of these compounds were carefully measured. The fluorescence quenching spec tra of pyrenyl butyric acid, compounds (Ⅰ), (Ⅱ) and (Ⅲ) by different nucleotide phosphates, AMP ADP, ATP dTTP, were also recorded and studied. The quenching and the stability constants were calculated by Stern-Volmer equa tion and eq. (2), respectively. The mechanism of interaction between fluorescence chemosensor and nucleotide phos phate was didscussed based on the comparison of the results obtained with the CPK model of free molecules of these com pounds in the ground state.     

Multielement analysis with ICP-AES-possibilities for quality control with CRMs

Summary An analysis using Certified Reference Materials (CRMs) together with routine samples is by far the best approach for quality control in multielement analysis of environmental samples. The selection of the correct CRM is thus the first important step for all reliable analysis. The chosen material should have a similar matrix, similar concentration of the element(s) of interest and a sufficient number of well-certified elements. For the analysis of samples from the Environmental Specimen Bank only a few CRMs could be successfully used. These were analyzed for a considerable period of time, together with the routine samples for quality control. The results of these analyses were compared with the certified values.     

Properties of novel gel particles with projections and preparations of composite particles with gold nanoparticles

Mono-dispersed gel particles with projections were prepared by dispersion polymerization with ethyleneglycol dimethacrylate and a polyethyleneglycol (PEG) block macro azo initiator in H₂O/ethanol solutions. The effects of molecular weight of PEG blocks and polymerization conditions on the morphology and some properties were examined for the gel particles. The diameters and the extent of coagulation were different with the polymerization conditions. Relatively large specific areas and large swelling ratio with H₂O were obtained, and these values were related with the polymerization conditions. By mixing the gel particles with gold nanoparticles in solutions, composite particles were formed, which were composed of gold nanoparticles adsorbed on the gel particles. Interaction between gold nanoparticles and reactive azo groups remained in the gel particles concerned for the formation of the composite particles.     

Characterisation of iota-carrageenans oligosaccharides with high-performance liquid chromatography coupled with evaporative light scattering detection

Enzymatically digested oligo-iota-carrageenans were separated with liquid chromatography, coupled to evaporative light scattering detection. As expected, compared to oligo-kappa-carrageenans, the additional sulphate group in the neocarrabiose unit of iota-carrageenans significantly modified the separation mechanisms on ion-exchange chromatography, porous graphitic carbon and ion-pair chromatography. The oligomers were then isolated and characterised off-line with electrospray ionisation mass spectrometry in positive-ion mode. The tetrasaccharide, hexasaccharide and octasaccharide that were identified were associated with protonated heptylamine molecules whose number depended on the number of sulphate groups.     

Reaction of Lithium Cellulosate with Episulfides

The reactions of propylene, ethylene, and styrene sulfide with cotton fabrics in the form of their lithium cellulosate derivative, obtained by metallation with lithium methoxide, were studied. Both graft and homo-polymerization took place and in the reaction with propylene and ethylene sulfide, cotton fabrics with high polysulfide content were obtained. With propylene sulfide 50% of the monomer polymerized was grafted. The effects of monomer concentration, cellulosate degree of substitution, reaction time, and solvent on the polymerization were investigated. In contrast with propylene and ethylene sulfide, only small conversions were obtained in the reaction with styrene sulfide. The results were attributed to steric effects.     

Cationic surfmers with benzyl groups: Synthesis and copolymerization with acrylamide

A series of cationic surfmers with benzyl groups（QARBCs）with different R groups on the benzene ring were synthesized and characterized by IR,¹H-NMR,¹³C-NMR.The aggregation of QARBCs was studied by the steady-state fluorescence technique.It turned out that QARBCs had surface activity and their critical micelle concentration（CMC）values varied in the range of 10^-2—10^-3mol/L with slight increase with temperature.The copolymerization of acrylamide（M₁）and QARBCs（M₂）was studied below and above CMC,their reactivity ratios were determined by the Finemann-Ross method.It was found that below CMC,copolymerization took place in a homogeneous system and reactivity ratios of acrylamide and QARBCs were less than 1;while above CMC,reactivity ratios of QARBCs were greater than 1.The copolymerization mechanism of QARBC was observed to be similar to that of micellar polymerization.QARBCs tended to homopolymerization,which gave rise to micro-blocky sequences in the polymer backbone.The Q and e values of QARBCs were calculated according to the Alfrey-Price equation by using r_1（AM）and r_2（qarBC）.Samples of poly（AM-co-QARBC） were prepared above and below CMC and their hydrophobic associations were studied by the steady-state fluorescence spectra and 2D NOESY spectra,and their critical associating concentrations（CAC）were estimated.The results showed that samples of poly（AM-co-QARBC）prepared above CMC had stronger hydrophobic association in aqueous solution than those prepared below CMC.     

Stabilized liposomes with phospholipid polymers and their interactions with blood cells

To stabilize a phospholipid liposome, addition of various water-soluble polymers into a liposomal aqueous suspension was investigated. The water-soluble polymers were poly(ethylene oxide) (PEO), poly(N-vinyl pyrrolidone) (PVPy) and poly[2-methacryloyloxyethyl phosphorylcholine(MPC)], and poly[MPC-co-n-butyl methacrylate(BMA)]. The gel–liquid crystal transition temperature (T_c) of the diparmitoylphosphatidylcholine (DPPC) liposome was not changed by addition of these polymers significantly. However, membrane fluidity of DPPC liposome treated with water-soluble polymers, which was measured with fluorescence probe, depended on the chemical structure of the water-soluble polymers. In the case of PEO and PVPy, the temperature dependence of membrane fluidity was the same as that of the original DPPC liposome, on the other hand, poly(MPC) and poly(MPC-co-BMA) induced a rise in the temperature where an increase in the membrane fluidity was observed. The release of carboxy fluorescein from the DPPC liposome was suppressed by the addition of the MPC polymers. The liposomes in the MPC polymer solution were stable compared with those in water when plasma was added into the suspension. Interactions with stabilized liposome with blood cells such as platelets and erythrocytes were evaluated. Activation of platelets in contact with liposome covered with poly(MPC) or poly(MPC-co-BMA) was less than PEO-stabilized liposome. On the other hand, no hemolysis of erythrocytes was observed when every polymer-treated liposome was added in the suspension of erythrocytes. Based on these results, the MPC polymers could interact with the liposome surface, adsorb on the liposomes and stabilize them, and had no adverse effect to the blood cells even when they were in a physiological environment.     

SOFA评分联合超声对脓毒症合并AKI患者的预后价值分析

本文主要探究SOFA评分联合超声对脓毒症合并急性肾损伤(AKI)患者的预后价值。选取2017年1月~2019年1月本院脓毒症合并AKI患者50例作为观察组,并分为AKI 1、2、3期,将同期入院的50例脓毒症患者作为对照组,两组患者均采用SOFA评分联合超声进行预后评估。结果发现,观察组PDU评分低于对照组(P<0.05),RI值、SOFA评分高于对照组(P<0.05);不同分期的3组间的PDU评分、SOFA评分不同,随着AKI分期的增加,PDU评分降低、SOFA评分增加(P<0.05),但3组间的RI值并无不同(P>0.05);50例脓毒症合并AKI患者发生院内死亡率为44.00%。经单因素分析发现,年龄、机械通气时间、ICU住院时间、AKI分期、脓毒症休克、SOFA评分、PDU评分为影响患者预后不佳的因素(P<0.05);AKI3期、发生脓毒性休克、SOFA评分、PDU评分是脓毒症合并AKI患者预后不佳的独立因素(P<0.05),ROC曲线下面积(AUC)越大,对预后的预测效能越好,当AUC>70.00%时具有临床价值。两者联合显著高于单独应用SOFA评分(AUC=74.28%)或PDU评分(P<0.001)。上述结果说明,脓毒症合并AKI患者采用SOFA评分联合超声用于评估患者的预后,优于单独采用SOFA评分或超声,两者联合的预测价值更大。     

茂钛化合物／改性MAO催化剂制备聚丙烯-b-间规聚苯乙烯嵌段共聚物

以五甲基环戊二烯基三苄氧基钛化合物 [Cp Ti(OBz) 3 ]为主催化剂 ,改性甲基铝氧烷作助催化剂 ,采用单体顺序投入法 ,合成了聚丙烯 b 间规聚苯乙烯嵌段共聚物 .外加三异丁基铝可以使活性中心的氧化态由Ti(Ⅳ )还原为Ti(Ⅲ ) ,从而提高苯乙烯共聚单体的转化率 .实验表明此催化体系对共聚物的合成具有较高活性 ,适宜的茂钛化合物浓度可阻止活性中心被丙烯预聚物包埋 .抽除残余丙烯气也可促进苯乙烯的共聚合 .对聚合产物进行溶剂连续萃取 ,可分离出嵌段共聚物 ,并用 13 CNMR和DSC进行结构表征     

Rigid-rod polymers with polysiloxane side chains. I. Synthesis and characterization of rigid-rod polyimides with polysiloxane side chains and their compatibility with linear polysiloxanes

Rigid-rod aromatic polyimdies having polydimethylsiloxane side chains were prepared for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The polyimides were obtained by imidizing the polyamide-acids bearing the side chains either thermally or chemically, which were synthesized by reacting 4,4′-diaminobiphenyl-terminated polysiloxane macromonomers with pyromellitic dianhydride in THF. The polyamide-acid films obtained by removing the solvent were soluble in THF, but the polyimides were insoluble in any common solvent. The polyimides showed no melting transition below 350°C on DSC analysis, at which temperature the side chain started decomposing. Although all the polyimides were anisotropic as observed by a polarizing microscope, x-ray diffraction analysis suggested the presence of only limited chain organization. Blends with linear polydimethylsiloxanes were prepared by casting the THF solution containing the polyamide-acid and the polydimethylsiloxane, followed by solvent evaporation and thermal imidization. With relatively longer side chains, the polyimides were proved to be compatibilized with polydimethylsiloxanes. © 1994 John Wiley & Sons, Inc.     

Interaction of chitosan with Cefotaxime

Features of complexation of chitosan with Cefotaxime antibiotic were examined. Optimal conditions for preparing the complexes were found, and their chemical composition and physicochemical properties were studied.     

Oxidation of sulfide with ArIO catalyzed with TPPM(III)Cl

Various sulfides were easily converted to the corresponding sulfoxides in high yields in TPPM(III)Cl-catalyzed oxidation with ArIO, to which the influence of structures of sulfides and iodosylaromatics, and kinds of metals centered on the catalysts were investigated.     

氧化锌微晶的制备和形貌控制

本文在溶液体系中合成了多种形貌的氧化锌(ZnO)微晶。所得花状、雪花状、棒状、多刺球状和棱柱状氧化锌微晶用粉末X射线衍射(XRD)和扫描电镜(SEM)进行了鉴定和表征,考察了反应条件如溶剂、温度及pH值对ZnO微粒尺寸和形貌的影响,初步探讨了不同形貌ZnO微粒的生长机理。该文对制备形貌可控的氧化物具有一定的指导意义。     

Properties of rubber filled with montmorillonite with various surface modifications

Layered silicate/natural rubber composites were prepared by direct polymer melt intercalation. Na‐montmorillonite Kunipia‐F and its organic derivates (organo‐clays) prepared by ion exchange were used as clay fillers. Silica (SiO₂) Ultrasil VN3, a filler commonly used in the rubber industry, was used in combination with clay fillers. The effect of clay or organo‐clay loading from 1 up to 10 phr without (0 phr) or with silica (15 phr) showed significant improvement of the tensile properties (stress at break, strain at break and modulus M100). Modification of montmorillonite by three alkylammonium cations with the same length of alkylammonium chain (18 carbons) and different structure resulted in altered reinforcing and plasticizing effects of the filler in composites with rubber matrix. Copyright © 2011 John Wiley & Sons, Ltd.