Speckle noise reduction in digital holography by use of multiple polarization holograms

A novel speckle reduction technique for digital holography is proposed. Multiple off-axis holograms are recorded using a circularly polarized illumination beam and a rotating linearly polarized reference beam. The speckle noise in the reconstructed images is suppressed by averaging these fields. We demonstrate the effectiveness of this technique experimentally and conduct additional statistical evaluation.     

Computer-generated hologram fabricated by electron-beam lithography for noise reduction

A Lohmann-type computer-generated hologram (CGH) is fabricated using an electron-beam lithographic system. A high-resolution groove width of 0.2 μm is attained in relief gratings by changing the e-beam exposures. A diffraction efficiency close to ∼30.4% is obtained by using resist-on-silicon recording materials and cell-structural apertures in a CGH. The reconstructed images exhibit fewer phase noises owing to the incorporation of a non-overflow cell structure into a CGH. The CGH is designed for reconstruction-noise reduction by using an iterative error-reduction algorithm. The designed CGH exhibits fewer reconstruction noises such that the performance function in the convergence is smaller by a factor of 1/3 than that in the first iteration. Experiments demonstrating the performance of CGHs obtained by electron-beam lithography are presented.     

Study on the reduction of speckle noise in the reconstructed image of digital hologram

As one of the most important 3-D display technique, reduction of speckle noise in the reconstructed image of digital holography should be grounded on the digital hologram itself. Based on the whole process of the recording and reconstruction of digital holography, the optical distributions of recorded object and reconstructed image of digital holography have been studied. It has been proposed that the root formation cause of speckle noise in its reconstructed image is the speckle noise formed on the recorded object surface when illuminated by coherent light because of its optical roughness. A novel approach has been presented to reduce speckle noise in digital holography by changing the interference structure of hologram itself. First, by reducing the speckle noise in the reconstructed image, the distribution of ideal reconstruction light with reduced speckle noise is acquired. Then in turn, taking the ideal reconstruction light with reduced speckle noise as ideal object light, a new hologram can be rebuilt, which can reconstruct the ideal object light. The experimental results are given to confirm the proposed method. Therefore, it offers a brand-new thought and practical way to reduce the speckle noise in the reconstructed image of digital holography.     

Speckle noise reduction in digital holography with spatial light modulator and nonlocal means algorithm

An integrated method based on optical and digital image processing is presented to suppress speckle in digital holography. A spatial light modulator is adopted to introduce random phases to the illuminating beam. Multiple holograms are reconstructed and superimposed, and the intensity is averaged to smooth the noise. The adaptive algorithm based on the nonlocal means is designed to further suppress the speckle. The presented method is compared with other methods reduction is improved, and the proposed method is effective The experimental results show that speckle and feasible.     

Speckle reduction by selective spatial-domain mask in digital holography

An improved method of using a selective spatial-domain mask to reduce speckle noise in digital holography is proposed.The sub-holograms are obtained from the original hologram filtered by the binary masks including a shifting aperture for being reconstructed. Normally, the speckle patterns of these sub-reconstructed images are different. The speckle intensity of the final reconstructed image is suppressed by averaging the favorable sub-reconstructed images which are selected based on the most optimal pixel intensity sub-range in the sub-holograms. Compared with the conventional spatial-domain mask method, the proposed method not only reduces the speckle noise more effectively with fewer sub-reconstructed images,but also reduces the redundant information used in the reconstruction process.     

Speckle noise reduction by the composition of diffused Fraunhofer holograms

The image reconstructed from a composite hologram is compared with that obtained by multiple-exposure of images independently reconstructed from a single element and also with that from a synthetic-aperture hologram. The experimental results show the difference in the principle of speckle noise reduction with these three methods and prove that the composite hologram arranged only in a row is sufficient for reducing the speckle noise.     

The influence of hologram aperture on speckle noise in the reconstructed image of digital holography and its reduction

Based on the whole process of the recording and reconstruction of digital holography, we study the formation cause of speckle noise in its reconstructed image and acquire the conclusion that the small size of hologram aperture diffraction aggravates the speckle noise of reconstructed image and the speckle noise has been one of primary noise sources in the reconstruction process. In order to reduce the speckle noise resulting from little hologram aperture diffraction, we set an appropriate aperture function matching the recording parameter and aperture size of hologram and deconvolve the reconstructed image with it. The validity has been proved in theory and experiment. Therefore, it offers a brand-new thought and practical way to reduce the speckle noise in the reconstructed image of digital holography.     

扫频光学相干层析视网膜图像配准去噪算法

多帧叠加平均处理是去除扫频光学相干层析系统散斑噪声、获得较为清晰结构信息的有效方法,但眼睛的震颤、漂移、微眼跳等生理特性和系统光路特性会使图像之间存在错位,导致叠加效果不佳、结构稳定性差,为此本文提出一种基于灰度分布信息和目标几何信息相结合的配准算法。该方法根据图像平均灰度分布提取包含目标信息的感兴趣区域,通过相位相关算法和基于分段拟合的灰度投影算法的双重作用校正图像的平移变换;通过拟合视网膜上边界作为特征点迭代确定最佳旋转参数,并再次重新估计平移参数,实现图像的刚性配准;最后通过轴向扫描一对一映射法以能量函数为约束条件实现图像的非刚性配准。对活体兔眼进行实验,结果表明,本文算法配准后的叠加图像边界清晰,结构信息增强,信噪比和对比度平均有效提高一倍多。本算法适用于强噪声视网膜B-Scans图像的配准,能满足多种类型OCT系统的叠加成像需要,具有较高的鲁棒性和图像配准精度。     

Reduction of speckle noise in digital holography by using digital image processing

A fundamental problem in optical and digital holography is the presence of speckle noise in the reconstruction process. Many approaches have been carried out in order to overcome such a problem ranging from modifying the spatial coherence of the illumination (optical techniques) to image processing techniques (digital techniques). This work shows the merged use of digital image processing techniques in order to reduce the speckle noise in digital reconstruction of optically recorded Fresnel's holograms. The proposed filtering techniques are illustrated with experimental results.     

Speckle reduction by energy time-frequency filtering

Structural noise is a very important limitation to the visibility of flaw echoes in ultrasonic testing and evaluation of highly scattering materials. In order to enhance the signal-to-noise ratio, different algorithms have been developed. One of these techniques is based on filtering the spectrum low band of the received echo to obtain a significant improvement of the defect visibility. Based on this idea, in this work a new time-frequency technique is presented. In this method, block-processing autoregressive techniques are used to estimate the instantaneous center frequency of the traveling wave. From this information, a time-frequency filter is designed tuned at half the estimated instantaneous center frequency. Experimental results and the comparison with the non-time-frequency filtering technique are also included, showing that the proposed method has an excellent performance on SNR enhancement.     

Recording and reconstruction of digital Gabor hologram

This paper looks at some as yet undisclosed observations in the recording and reconstruction of digital Gabor hologram. Small particles on the specimen plane diffract the illuminating spherical wave to form the object wave which interferes with the un-diffracted reference to form the in-line hologram. The interference is similar to that between two spherical wavefronts. It is shown that resolution enhancement can be achieved in the recording process through the use of wavefronts with different curvature. Numerical reconstruction of this hologram with a conjugate of the illuminating (reference) wave provides the in-focus real image at the object plane. It is exemplified that the proper choice of the reconstruction wavefront can optically magnify the reconstructed image enabling one to better visualize the resolution enhancement. Both theoretical analysis and experimental confirmation are provided for these observations.     

Materials for noise reduction in food processing environments

Government standards for noise levels in industrial environments including the food processing industry have led to a program of materials selection for noise reduction. In addition to traditional architectural considerations, the constraints of sanitation and cost were factors. Primary materials systems studied were: (i) metal/polymer composites for impact noise reduction, (ii) polymer film/foam composites for sound absorption and (iii) transparent polymer barrier/enclosures. Of these three material systems, the third appears to be the most effective choice for reducing noise in the canneries.     

Dynamic recording of a digital hologram with single exposure by a wave-splitting phase-shifting method

The wave-splitting phase-shifting digital holography using a pixelated microretarder array is proposed. By using four intensity images recorded by the pixelated microretarder array, Stokes parameters of the incident wave can be calculated. The fully complex amplitude distribution of the object wave can be obtained by using Stokes parameters, if the polarization states of the object and reference waves are linear and orthogonal. Two sets of experimental results are provided to verify the feasibility of the proposed method. One is the result for a movie recording using a CW laser and the other is the result for instant recording using a single pulsed laser.     

基于图像熵的各向异性扩散相干斑噪声抑制

本文提出了一种基于图像熵的各向异性扩散滤波方法. 该方法使用图像熵作为边缘检测算子, 避免了由于均值和方差等统计量的估计带来的误差, 提高了边缘检测能力. 试验结果表明该方法能够获得比传统方法更好的相干斑噪声抑制效果. 关键词： 相干斑抑制 各向异性扩散 图像熵 合成孔径雷达     

Speckle reduction by a rotating aperture at the fourier transform plane

Statistical properties of the time-averaged speckle-reduced pattern at the image plane of a coherently illuminated uniform diffuse object are theoretically and experimentally studied. The diffuse object is assumed to be approximated by a deep random phase screen and zero-mean circular complex Gaussian statistics is also assumed to hold for the formation of speckles. The time-averaging process is performed by using a rotating aperture at the Fourier transform plane of the object. A theoretical study of the speckle reduction is conducted for a rotating Gaussian soft aperture at the Fourier transform plane. Expressions are analytically derived for the mean, autocorrelation function, power spectrum, and contrast of the time-averaged speckle pattern at the image plane. In particular, the contrast of the time-averaged speckle pattern is theoretically evaluated and its characteristics are discussed in detail. The theoretical results for the contrast are experimentally confirmed using a TV/film recording system. Excellent agreement between theoretical and experimental results is obtained.     

基于Hilbert变换实现数字全息高精度相位重建

为了提高数字全息相位重建精度,研究了基于Hilbert变换重建相位的理论和方法,并通过像面数字全息实验对该方法的有效性进行了验证,同时与数字全息常规重建方法得到的结果进行了比较.结果表明:Hilbert变换本身具有消除直流项的作用,对利用频域滤波滤除零级谱后的全息图进行Hilbert变换,能够彻底消除零级衍射项的干扰,从而提高相位重建精度.与常规重建结果相比,基于Hilbert变换的相位重建结果的标准偏差降低了14.0%.本文结果对提高数字全息相位重建精度具有重要的指导意义.     

合成孔径雷达图像的Contourlet域空间选择滤波降斑算法

合成孔径雷达(SAR)图像的相干斑噪声降低了影像分割和分类的效果,会导致影像判识困难。结合Con-tourlet系数的结构特点和SAR图像相干斑乘性噪声模型,提出了一种新的基于Contourlet变换的降斑算法。该算法利用信号与噪声在Contourlet域尺度间相关性的不同,通过空间选择滤波对系数进行分类,采用混合分布模型,实现了SAR图像的降斑处理。实验结果表明,该算法不仅能有效地抑制相干斑,而且还能有效地保护图像的细节特征。     

Speckle averaging by phase shift for digital shearography fringe

ＳｐｅｃｋｌｅａｖｅｒａｇｉｎｇｂｙｐｈａｓｅｓｈｉｆｔｆｏｒｄｉｇｉｔａｌｓｈｅａｒｏｇｒａｐｈｙｆｒｉｎｇｅＦ．Ｃｈｅｎ；Ｙ．Ｙ．Ｈｕｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆｍｅｃｈａｎｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＯａｋｌａｎｄＵｎｉｖｅｒｓｉｔｙ，Ｒ...     

单幅层析全息图的记录及数据重建

进行了数字单幅离轴层析全息图记录和数值处理模拟分析及实验研究.首先定义了单幅层析全息图并分析了基于多向投影的数字单幅离轴层析全息图频谱分布特点, 由此表明它的可处理性.在此基础上,数值模拟分析了基于三向投影的单幅离轴层析全 息图记录与各向投影信息的分离提取, 最后选择了具有周期结构的透明光栅(周期为100 μm)作为实验样本, 实现了三向投影的单幅层析全息图的记录以及数值重建, 三束物光波重建周期值误差在4%-5%范围内.模拟分析及实验结果验证了单幅层 析全息图记录与信息分离的可行性,同时为实现具备实时检测功能的极少量投影数字全息 层析系统提供了重要的技术基础.     

The reconstruction of diffractive object digital hologram at a short distance

By using a spherical wave as the reference wave, we recorded the in-line phase-shifting digital hologram of the 25th element of Chinese standard No. 3 resolution test pattern, and gave the corresponding numerical reconstructed results. Some problems concerning with the digital hologram recording and reconstruction of the diffractive object at a short distance are discussed. The experimental result shows that the resolution of the reconstructed image is better than 10μm, which is the limit by using this experimental arrangement.