吡啶-芴类电荧光聚合物的光谱特性

用Suzuiki聚合反应将二溴代吡啶 (2 ,5 、2 ,6 、3,5 取代 )与芴共聚 ,合成了不同主链结构的吡啶 芴共聚物 .研究结果表明 ,将吡啶基引人聚芴主链可以调节共聚物的发光颜色 .间位吡啶基引入聚芴主链 ,使聚合物的能级加宽 ,PL、EL光谱发生蓝移 ;对位吡啶基则使光谱红移 .间位吡啶基 (3,5 Py、2 ,6 Py)引入聚芴主链 ,可提高聚合物的色纯度 .共聚物中 3,5 Py含量为 4 0mol%时 ,可得到较纯的蓝光 .     

芴-苯并噻二唑-苯胺类共聚物的合成与发光性能

用Suzuki缩聚反应分别将窄带隙单元-苯并噻二唑-二苯胺(DPABT)和苯并噻二唑-三苯胺(TPABT)引入聚芴主链,合成了共聚物PF-DPABT和PF-TPABT,并比较了共聚物的发光性能.随着窄带隙单元含量的增加,其特征发射逐渐增强,说明发生了从聚合物主体单元到窄带隙单元有效的能量转移.两种共聚物在低窄带隙单元含量(1mol%)下的电致发光光谱仅出现窄带隙单元的特征发射,PF-DPABT共聚物为650～680nm之间的饱和红光,而PF-TPABT共聚物为590～610nm之间的橙红光,聚芴主体单元的发射被完全淬灭,说明与光致发光过程相比,电致发光过程中的能量转移更完全.基于共聚物PF-DPABT-1及PF-TPABT-5器件的最大外量子效率分别为1.3%和2.0%,器件结构为ITO/PEDOT:PSS/polymer/Ba/Al,是一类有希望的红光材料.     

电致蓝光芴取代聚芴的合成与光谱稳定性

为了筛选高效稳定的聚合物电致蓝光材料, 设计合成了三苯胺和芴取代的二芳基芴单体, 并通过Suzuki缩聚合成了交替共聚物TPAFF-co-F和TPAFF-co-P. 将二辛基芴引入聚芴的9位可以增加其溶解度, 同时具有屏蔽主链和减少主链芴9位被氧化的作用, 三苯胺基团将有利于提高空穴在阳极界面的注入能力. 200 ℃下空气中退火24 h实验表明, 在相同条件下, 绿光指数(Igreen/Iblue)顺序为聚(9,9-二辛基芴)(1.07)>TPAFF-co-F(0.65)>TPAFF-co-P (0.47), 证明了烷基芴引入减少了主链氧化的几率. 还制作了发光二极管器件, 其结构为ITO/PEDOT:PSS(40 nm)/TPAFF-co-F或TPAFF-co-P(80 nm)/Ba(4 nm)/Al(120 nm). 在高电流密度下它们保持了良好的光谱稳定性, 在547 mA·cm-2电流密度下, TPAFF-co-F的CIE(国际发光照明委员会)坐标为(0.22, 0.24), TPAFF-co-P的CIE坐标为(0.24, 0.26), 后者的电流效率为0.712 cd·A-1.     

一种基于三苯胺类共轭聚合物荧光信号开启的汞离子检测方法

通过Suzuki反应合成出主链中含9,9-二(4-二苯胺基苯基)-3,6-芴的蓝光共轭聚合物—聚[2,7-(9,9-二辛基芴)-co-3,6-(9,9-二三苯胺基芴)] (36PFT).36PFT可特异地与I-相互作用,并淬灭36PFT的荧光.当I-的浓度为0.24 mmol/L时,36PFT的荧光淬灭程度可达95％,...     

芴与噻吩发光共聚物的合成及其电致发光性能

采用Suzuki偶合方法合成出了一系列新型的 9,9 二辛基芴 (DOF)和噻吩 (Th)的共聚物 .其中 ,DOF与Th的投料比 (摩尔比 )分别为 95∶5 (PTF5 )、90∶1 0 (PTF1 0 )、85∶1 5 (PTF1 5 )、70∶3 0 (PTF3 0 )、5 0∶5 0 (PTF5 0 ) .所有的聚合物均可溶于常用的有机溶剂 ,如THF,CHCl3等 ,其分子量在 60 0 0～ 5 3 0 0 0之间 .当在聚芴主链中引入噻吩后 ,其发光波长发生了红移 ,最大发光波长由PTF5时的 490nm红移到PTF5 0时的 5 41nm .随着聚芴主链中噻吩含量的增加 ,最大电致发光和光致发光效率都逐渐降低 由这些聚合物所制得的器件 ,最大电致发光效率为PTF5和PTF1 0的 0 45 %.由此表明 ,在聚芴主链中引入少量的低带隙单体噻吩可以调节聚芴的发光颜色及发光效率     

三苯胺-螺硅芴共聚物的合成

三苯胺-螺硅芴共聚物的合成;螺硅芴;三苯胺;共聚物;合成     

侧链接枝低聚对亚苯基亚乙烯基聚芴衍生物的合成及其电致发光性能

采用Wittig-Horner反应,将少量端基为磷脂的黄光发射客体低聚对亚苯基亚乙烯基链段(MOPV)接枝到含有醛基单体的蓝光发射主体材料聚芴的侧链上,合成了一种新型的接枝聚芴衍生物PF-g-MOPV.这种接枝聚合物具有很好的热稳定性,可溶于常用的有机溶剂.以接枝共聚物PF-g-MOPV为发光层的单层器件发射出黄绿光,色坐标为(0.30,0.57),最大发光亮度达到1550cm/m2,这说明蓝光聚芴主链向侧链MOPV进行了有效地能量转移.     

含噻吩单元的硅芴共聚物的合成及其蓝色电致发光性能

将少量(摩尔分数为1%—3％)含噻吩的窄带隙单体和宽带隙硅芴单体进行共聚, 合成了聚{9,9-二己基-3,6-硅芴-co-[2,5-二(2-甲基苯撑-4-基)-噻吩]}和聚{9,9-二己基-3,6-硅芴-co-[2,5-二(2-苯撑-4-基)-噻吩]}两类硅芴共聚物, 通过紫外-可见吸收光谱、光致发光光谱, 并制作聚合物发光二极管器件测试电致发光光谱等手段, 系统表征了两类硅芴共聚物材料的性能. 实验结果表明, 噻吩的加入形成了新的蓝色发光中心, 并且实现了从硅芴链段到含噻吩发光中心的有效能量转移. 通过增加发光中心结构的空间位阻来减小其共轭程度, 可以使聚合物的PL和EL光谱发生较大蓝移. 最终得到了效率为0.46%和色坐标(CIE)为(0.19, 0.16)的蓝光LED器件.     

含硅芳香二胺的合成及其聚酰亚胺硅氧烷的热性能

从ｐ－或ｍ－氯苯胺出发，经三步反应合咸位置弄构的四甲基［双（苯胺）］二硅氧烷和六甲基［双（苯胺）］三硅二氧烷，总产率为２５％．与芳香二胺和芳香四酸二酐共聚得聚酰亚胶硅氧烷．研究了共聚物在玻璃化转变区的热松弛行为．对位异构体的共聚物，其分子链段的构象熵大，运动较易．     

主链含有非共轭结构的聚芴类蓝光聚合物的合成与性能研究

通过Suzuki偶合反应合成出了主链中含有非共轭烷氧基组分(-O-CH2-CH2-CH2-CH2-O-)的聚芴类衍生物聚- 2,7-(9,9-二辛基芴)-co-4,4’-丁氧基二苯(PFP)和聚-2,7-(9,9-二辛基芴)-co-4,4’-丁氧基二苯-co-N-苯基-4,4’-二苯胺(PFTP11)并通过相同的条件合成出主链由芴和三苯胺交替相连的聚合物聚-2,7-(9,9-二辛基芴)-co-N-苯基-4,4’-二苯胺(PFTPA)作为参比材料. 通过1H NMR和FT-IR分析对这些聚合物的化学结构进行了表征. 这三种聚合物在常用的有机溶剂中具有很好的溶解性, 可通过溶液加工的方式制备聚合物薄膜. 这些聚合物均具有较高的热分解温度(＞400 ℃), 聚合物PFP具有较高的玻璃化转变温度(～130 ℃)而PFTP11和PFTPA则未出现明显的玻璃化转变过程. 通过对聚合物的吸收特性进行测试得知它们具有较大的光学带宽(2.89～3.29 eV). 所有聚合物在固体薄膜状态下均发射出蓝色荧光, PFP, PFTP11和PFTPA的最大PL发射分别位于425, 437和440 nm. 通过对其电化学性能进行测试可知由于三苯胺基团的引入聚合物的HOMO能级明显提高, 这意味着聚合物的空穴传输能力得到了有效的改善.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.