Field-flow fractionation of magnetic particles in a cyclic magnetic field

Although magnetic field-flow fractionation (MgFFF) is emerging as a promising technique for characterizing magnetic particles, it still suffers from limitations such as low separation efficiency due to irreversible adsorption of magnetic particles on separation channel. Here we report a novel approach based on the use of a cyclic magnetic field to overcome the particle entrapment in MgFFF. This cyclic field is generated by rotating a magnet on the top of the spiral separation channel so that magnetic and opposing gravitational forces alternately act on the magnetic particles suspended in the fluid flow. As a result, the particles migrate transversely between the channel walls and their adsorption at internal channel surface is prevented due to short residence time which is controlled by the rotation frequency. With recycling of the catch-release process, the particles follow saw-tooth-like downstream migration trajectories and exit the separation channel at velocities corresponding to their sedimentation coefficients. A retention model has been developed on the basis of the combined effects of magnetic, gravitational fields and hydrodynamic flow on particle migration. Two types of core-shell structured magnetic microspheres with diameters of 6.04- and 9.40-μm were synthesized and used as standard particles to test the proposed retention theory under varying conditions. The retention ratios of these two types of particles were measured as a function of magnet rotation frequency, the gap between the magnet and separation channel, carrier flow rate, and sample loading. The data obtained confirm that optimum separation of magnetic particles with improved separation efficiency can be achieved by tuning rotation frequency, magnetic field gradient, and carrier flow rate. In view of the widespread applications of magnetic microspheres in separation of biological molecules, virus, and cells, this new method might be extended to separate magnetically labeled proteins or organisms for multiplex analyte identification and purification.     

The use of the finite element method for calculating the thermophoresis velocity of large aerosol particles

The finite element method has been employed to calculate the thermophoresis velocity of solid aerosol particles, the sizes of which are much larger than the mean free path of molecules in a gas. The thermophoretic velocities of axially symmetric particles moving along their rotation axes have been numerically calculated. Cylindrical particles, particles having a shape resulting from rhomb rotation around one of its diagonals, and spheroidal particles have been considered. The data obtained for spheroidal particles have been compared with the available results of analytical calculations.     

Magnetic-based purification system with simultaneous sample washing and concentration

Simultaneous washing and concentration of magnetic microparticles was demonstrated using a rotational magnetic system under a continuous-flow condition. The rotation of periodically arranged permanent magnets close to a fluidic channel carrying a suspension of magnetic particles allows the trapping and releasing of particles along the fluidic channel in a periodic manner. Each trapping and releasing event resembles one washing cycle in conventional biological assays. Concentration efficiencies of 99.75?±?0.083% at a flow rate of 200 µl/min and 88.10?±?3.17% at a flow rate of 1,000 µl/min and a purification efficiency of 99.10?±?4.3% at a flow rate of 900 µl/min were achieved.     

Sudden breakdown in linear response of a rotationally driven magnetic microparticle and application to physical and chemical microsensing

In this work, sensing magnetic microparticles were used to probe both the local pH and the viscosity-dependent nonlinear rotational behavior of the particles. The latter resulted from a critical transition marking a driven particle's crossover from phase-locking to phase-slipping with an externally rotating magnetic field, i.e., a sudden breakdown in its linear response that can be used to measure a variety of physical quantities. The transition from simple rotation to wobbling is described both theoretically and experimentally. The ability to measure both chemical and physical properties of a system could enable simultaneous monitoring of chemical and physical interactions in biological or other complex fluid microsystems.     

The use of the finite-element method for calculating the photophoresis velocity of large aerosol particles

The finite-element method has been employed to calculate the photophoresis velocity of solid aerosol particles, the sizes of which are much larger than the mean free path of molecules in a gas. The thermal electromagnetic radiation from the particle surface and the temperature dependences of the density, viscosity, and thermal conductivity of the gaseous medium and particle material have been taken into account. The photophoresis velocity has been numerically calculated for a number of axially symmetric particles moving along their rotation axes. Cylindrical particles, particles having a shape resulting from rhomb rotation around one of its diagonals, and spheroidal particles have been considered.     

悬浮聚合制备大尺寸梭形聚苯乙烯粒子新方法及机理研究

利用氢氧化钾对苯乙烯-马来酸酐交替共聚物(SMA)进行水解,所得中等皂化程度的SMA水解产物(SMAA)在水溶液中具有刚性棒状直链构型;将此特殊结构的大分子作为分散剂用于苯乙烯悬浮聚合,通过控制搅拌速度和油水比,可得到梭形聚苯乙烯粒子;在优化条件下,粒子平均长度6.8 mm,宽度1.4 mm,厚度0.5 mm,长径比约5.0.其可能的机理为,中等皂化程度的刚棒直链型SMAA在聚合物"软粒子"表面能形成难以"回复"的有效保护层,使由剪切形成的变形聚合物"软粒子"在聚合过程中能保持形状和尺寸的稳定,从而得到梭形聚合物粒子.     

Synthesis of polyhedral particles by dispersion polymerization in supercritical carbon dioxide

The novel synthesis of polyhedral particles was attained by the dispersion polymerization of styrene in supercritical carbon dioxide using a polydimethylsiloxane-based macroazoinitiator as a precursor of the surfactant. The macroazoinitiator, VPS-1001, composed of poly(dimethylsiloxane) and 6-8 molecules of the azo groups served as a precursor of the surfactant for the dispersion polymerization by azobisisobutylonitrile as an initiator to produce 0.8-4 μm polyhedral particles. The size of the particles decreased as a result of increasing the VPS-1001 concentration. Too high a concentration of VPS-1001 caused coagulation of the particles. A decrease in the temperature increased the particle size and size distribution, while a decrease in the pressure produced particles with nonspecific shapes. An increase in the stirring rotation speed tended to increase the size and size distribution. However, too high a speed of rotation also caused coagulation of the particles.     

Magneto-Optical Properties of Silica Gel Containing Magnetite Fine Particles

The magnetic composite materials that consist of transparent matrix and magnetic fine particles are expected to have large residual magnetization and coercive force because of their fine magnetic domain structure, and also to show magneto-optical effects. Silica gels containing magnetite (Fe₃O₄) fine particles were prepared by sol-gel method. The magnetic, optical and magneto-optical properties of the composites were investigated by measurements of magnetization curves, UV-visible spectra and Faraday rotation in visible range. The saturation magnetization of the composite was almost as same as that expected from the amount of magnetite fine particles in it. Although the composites had large and broad absorption at around 400 nm, they still maintained their transparency. The origins of decrement of transparency attributed to the optical absorption of magnetite and scattering due to magnetite fine particles. The whole composites showed positive Faraday rotation under external static magnetic field due to the large contribution of diamagnetic silica gel matrix. Magnetite contributed negative Faraday rotation with maximum at around 470–480 nm to the magneto-optical spectra of the composites.     

Dusty Plasma in Inhomogeneous Magnetic Fields in a Stratified Glow Discharge

We study the dynamics of dust particles in a stratified glow discharge in inhomogeneous magnetic fields. Dust structures are formed in standing striations, in which traps for dust particles arise. When a magnetic field is applied, these structures begin to rotate. The observations were carried out in striations near the end of the solenoid, where the region of an inhomogeneous magnetic field begins. With an increase in the magnetic field, the dusty structure can be deformed. The rotation of a dusty structure in an inhomogeneous magnetic field has been studied in detail; it has its own peculiarities in comparison with rotation in a uniform field. We have considered the mechanisms of such rotation and estimated its velocity.     

Magneto-stimulated hydrodynamic control of electrocatalytic and bioelectrocatalytic processes

Magnetic rotation of redox-functionalized magnetite particles leads to enhanced electrocatalysis and bioelectrocatalysis.     

Anomalous particle rotation and resulting microstructure of colloids in AC electric fields

We study the transition of ordered structures to disordered bands and vortices in colloidal suspensions subjected to AC electric fields. We map the critical frequencies and field biases at which particles form disordered bands and vortices. These results are interpreted based on the trajectory dynamics of particle pairs using blinking optical tweezers. Under conditions that vortices are observed, individual particle pairs rotate out of alignment with the field. The direction and magnitude of these interactions determine the orientation and average angular velocity of the band revolution. Increasing the frequency of the electric field reduces the anomalous rotation of the particles pairs, consistent with the frequency dependence of the suspension order-to-disorder transition. This anomalous rotation is consistent with a torque on doublets generated by the mutual polarization of particles and phase lag of the induced dipoles.     

Size-sorted anionic iron oxide nanomagnets as colloidal mediators for magnetic hyperthermia

Iron oxide colloidal nanomagnets generate heat when subjected to an alternating magnetic field. Their heating power, governed by the mechanisms of magnetic energy dissipation for single-domain particles (Brown and Néel relaxations), is highly sensitive to the crystal size, the material, and the solvent properties. This study was designed to distinguish between the contributions of Néel and Brownian mechanisms to heat generation. Anionic nanocrystals of maghemite and cobalt ferrite, differing by their magnetic anisotropy, were chemically synthesized and dispersed in an aqueous suspension by electrostatic stabilization. The particles were size-sorted by successive electrostatic phase separation steps. Parameters governing the efficiency of nanomagnets as heat mediators were varied independently; these comprised the particle size (from 5 to 16.5 nm), the solvent viscosity, magnetic anisotropy, and the magnetic field frequency and amplitude. The measured specific loss powers (SLPs) were in quantitative agreement with the results of a predictive model taking into account both Néel and Brown loss processes and the whole particle size distribution. By varying the carrier fluid viscosity, we found that Brownian friction within the carrier fluid was the main contributor to the heating power of cobalt ferrite particles. In contrast, Néel internal rotation of the magnetic moment accounted for most of the loss power of maghemite particles. Specific loss powers were varied by 3 orders of magnitude with increasing maghemite crystal size (from 4 to 1650 W/g at 700 kHz and 24.8 kA/m). This comprehensive parametric study provides the groundwork for the use of anionic colloidal nanocrystals to generate magnetically induced hyperthermia in various media, including complex systems and biological materials.     

Particle Network Self-Assembly of Similar Size Sub-Micron Calcium Alginate and Polystyrene Particles Atop Glass

Particle-mediated self-assembly, such as nanocomposites, microstructure formation in materials, and core-shell coating of biological particles, offers precise control over the properties of biological materials for applications in drug delivery, tissue engineering, and biosensing. The assembly of similar-sized calcium alginate (CAG) and polystyrene sub-micron particles is studied in an aqueous sodium nitrate solution as a model for particle-mediated self-assembly of biological and synthetic mixed particle species. The objective is to reinforce biological matrices by incorporating synthetic particles to form hybrid particulate networks with tailored properties. By varying the ionic strength of the suspension, the authors alter the energy barriers for particle attachment to each other and to a glass substrate that result from colloidal surface forces. The particles do not show monotonic adsorption trend to glass with ionic strength. Hence, apart from DLVO theory—van der Waals and electrostatic interactions—the authors further consider solvation and bridging interactions in the analysis of the particulate adsorption-coagulation system. CAG particles, which support lower energy barriers to attachment relative to their counterpart polystyrene particles, accumulate as dense aggregates on the glass substrate. Polystyrene particles adsorb simultaneously as detached particles. At high electrolyte concentrations, where electrostatic repulsion is largely screened, the mixture of particles covers most of the glass substrate; the CAG particles form a continuous network throughout the glass substrate with pockets of polystyrene particles. The particulate structure is correlated with the adjustable energy barriers for particle attachment in the suspension.     

Pickering stabilization of foams and emulsions with particles of biological origin

The focus in the study of Pickering foams and emulsions has recently been shifting from using inorganic particles to adopting particles of biological origin for stabilization. This shift is motivated by the incompatibility of some inorganic particles for food and biomedical applications, as well as their poor sustainability. This review focuses on major developments in foams and emulsions stabilized by particles of biological origin from the last 5 years. Recent reports in the literature have demonstrated the ability of particles derived from cellulose, lignin, chitin, starch, proteins (soy, zein, ferritin), as well as hydrophobic cells to stabilize biphasic dispersions. We review the use of such nano- and micron-sized particles of biological origin for the stabilization of foams and emulsions, summarize the current knowledge of how such particles stabilize these dispersions, provide an outlook for future work to improve our understanding of bio-derived particle-stabilized foams and emulsions, and touch upon how these systems can be used to create novel materials.     

Formation Optimization and Electrocatalytic Properties of Platinum-Modified Polyaniline Films

The electrocatalytic properties of platinum particles incorporated into polyaniline films are investigated for oxidation of methanol in sulfuric acid electrolyte. It is found that the oxidation of methanol depends greatly on the nature of both polyaniline matrix and platinum particles which can be optimized by the electrochemical formation conditions, such as cycle numbers, deposition mode, and rotation rate.     

The rotating particles probe: A new technique to measure interactions between particles and a substrate

We demonstrate a new probing technique to measure physicochemical interactions between particles and a substrate in a fluid. The technique is based on the measurement of field-induced rotation of individual magnetic particles in contact with the substrate. The parallel measurement of many particles with single-particle resolution gives reliable statistics in a short time. Using this technique, the interaction between streptavidin-coated magnetic particles and a glass substrate is measured for various buffer conditions. Increased binding is quantified for increasing ionic strength and decreasing pH. The results are found to be in agreement with calculations of electrostatic interactions. We also apply the technique to study how binding is reduced by blocking the substrate with albumin.     

Anomalous low-frequency electro-optic behavior of ferric oxide particles in the presence of poly(ethylene oxide)

Electro-optic techniques were used to investigate the influence of poly(ethylene oxide) (PEO) on the surface electric state of positively charged oxide particles. The variations in particle electrophoretic mobility of beta-FeOOH particles in the presence of PEO indicate significant changes in the surface electric state of the particles in the concentration interval of PEO 10(-2)-10(-1) g dm(-3). The electro-optic results for the same conditions were unexpected: no significant difference is observed in the value and the relaxation frequency of particle electric polarizability in the frequency domain of the alpha-relaxation (detected in the kilohertz range); particle rotational relaxation time also remains unchanged; considerable changes are detected only in the relaxation interval of particle rotation (detected in the hertz range). The obtained results reject the possibility of the formation on the particle surface of a thick polymer layer. A thin adsorption layer cannot explain the significant decrease in particle electrophoretic mobility. The variations in electrophoretic mobility are well correlated with the effects in the domain of particle rotation. A possible explanation of the observed effects is proposed, based on our previous investigations of the effects in the low-frequency domain. The presented results demonstrate that the important information on the electrokinetic charge distribution is not found in the domain of the alpha-dispersion, but in the domain of particle rotation.     

Effect of processing parameters on the corrosion behaviour of friction stir processed AA 2219 aluminum alloy

The effect of processing parameters (rotation speed and traverse speed) on the corrosion behaviour of friction stir processed high strength precipitation hardenable AA 2219-T87 alloy was investigated. The results indicate that the rotation speed has a major influence in determining the rate of corrosion, which is attributed to the breaking down and dissolution of the intermetallic particles. Corrosion resistance of friction stir processed alloy was studied by potentiodynamic polarization, electrochemical impedance spectroscopy, salt spray and immersion tests.     

铵根离子在水溶液中的跳跃转动机理

铵根离子的动力学行为与生命体内的生物和化学过程密切相关.依据流体力学理论,由于铵根离子与水分子之间存在多个强氢键,其转动应较慢,但实验结果并非如此,其转动的微观机理尚不清晰.本文分子动力学模拟研究表明,水溶液中铵根离子主要以快速、大角度的跳跃方式进行转动,像水分子一样遵从扩展分子跳跃转动模型.通过微观转动模式的分解和两种转动弛豫时间的比较发现,相对其氢键骨架的扩散转动,跳跃转动对其转动速率贡献更大,并随浓度增大不断强化.与水分子氢键交换方式相比,铵根离子更倾向于在非氢键相连的水分子间发生交换.     

Steady electro-optic characteristics of noninteracting colloidal particles

In previous papers on the electro-optic effects of beta-FeOOH particles we proposed a new procedure for analysis of the low frequency behavior of charged particles. The procedure is based on comparison of characteristic field intensity curves on an appropriate scale and helps to test the dependence of the slow effects on particle surface electric polarizability (relaxing in the kilohertz domain). The results stimulated us to test the applicability of the method to other samples and to reconsider the literature data on the electro-optic behavior of charged colloids in the hydrodynamic domain. The aim of the present paper is to demonstrate on a series of samples similar features of the electro-optic responses of charged particles in the relaxation interval of particle rotation. The analysis leads to a new hypothesis for explanation of the complicated low frequency behavior of charged particles. The superposition of two slow effects (linear and quadratic with field intensity), relaxing in the relaxation interval of particle rotation, can explain the complicated frequency curves in this domain. One of the slow effects is observed for all polarizable particles. It is of negative sign and displays the features of an induced dipole effect dependent on the "kilohertz" induced moment. It corresponds to a slow stage of the surface polarization process related to electrokinetic charge. The linear slow effect shows permanent dipole like behavior and appears only at certain ionic content of the medium. It shows no direct dependence on counterion mobility and on the "kilohertz" induced moment and is probably due to surface charge nonuniformity.