Inhomogeneous plane waves in compressible viscous fluids

The propagation of inhomogeneous plane waves in a compressible viscous fluid is considered. The frequency and the slowness vector are both allowed to be complex. There are seen to be two types of solutions: (a) two transverse waves, which involve no density or pressure fluctuations, (b) a longitudinal wave, which involves no fluctuations in vorticity. For each type, a propagation condition is obtained giving the (complex) squared length of the slowness vector as a function of frequency. Each depends also on the viscosities. It is seen how to recover the incompressible case as the limit in which the inviscid acoustic wave speed tends to infinity. Each wave is shown to be linearly stable for real frequencies. These waves are attenuated in space and time but nevertheless it is possible to define constant weighted mean values (over a cycle of the propagating part of the wave) of the energy density, energy flux and dissipation. The energy-dissipation equation and the propagation conditions are used to derive relationships between these constant weighted means, some of which are generalizations to compressible fluids of previously known results for incompressible fluids. Explicit expressions in terms of frequency are given for the weighted means.     

Thermoelasticity without energy dissipation

This paper deals with thermoelastic material behavior without energy dissipation; it deals with both nonlinear and linear theories, although emphasis is placed on the latter. In particular, the linearized theory of thermoelasticity discussed possesses the following properties: (a) the heat flow, in contrast to that in classical thermoelasticity characterized by the Fourier law, does not involve energy dissipation; (b) a constitutive equation for an entropy flux vector is determined by the same potential function which also determines the stress; and (c) it permits the transmission of heat as thermal waves at finite speed. Also, a general uniqueness theorem is proved which is appropriate for linear thermoelasticity without energy dissipation.     

Inhomogeneous plane waves in viscous fluids

The propagation of elliptically polarised inhomogeneous plane waves in a linearly viscous fluid is considered. The angular frequency and the slowness vector are both assumed to be complex. Use is made throughout of Gibbs bivectors (complex vectors). It is seen that there are two types of solutions—the zero pressure solution, for which the increment in pressure due to the propagation of the wave is zero, and a universal solution which is independent of the viscosity.Since the waves are attenuated in time, the usual mean energy flux vector is not a suitable way of measuring energy flux. A new energy flux vector, appropriate to these waves is defined, and results relating it with energy dissipation and energy density are obtained. These results are related to a result derived directly from the balance of energy equation.     

Free vibration of microstretch thermoelastic plate with one relaxation time

The propagation of waves in microstretch thermoelastic homogeneous isotropic plate subjected to stress free thermally insulated and isothermal conditions is investigated in the context of conventional coupled thermoelasticity (CT) and Lord and Shulman (L–S) theories of thermoelasticity. The secular equations for both symmetric and skew-symmetric wave mode propagation have been obtained. At short wavelength limits, the secular equations for symmetric and skew-symmetric modes reduce to Rayleigh surface wave frequency equation. The amplitudes of dilatation, microrotation, microstretch and temperature distribution for the symmetric and skew symmetric wave modes are computed analytically and presented graphically for different theories of thermoelasticity. The theoretical and numerical computations are found to be in close agreement.     

A note on the uniqueness of solution in the linear theory of thermoelasticity without energy dissipation

In the context of the linear theory of thermoelasticity without energy dissipation for homogeneous and isotropic materials, the uniqueness of solution of a natural initial, mixed boundary value problem is proved. The proof depends on an equation of energy balance formulated entirely in terms of temperature and velocity fields.     

Thermoelastic interactions without energy dissipation in an unbounded body with a spherical cavity subjected to harmonically varying temperature

The present work is concerned with the thermally induced vibration in a homogeneous and isotropic unbounded body with a spherical cavity. The Green and Nagdhi model of thermoelasticity without energy dissipation is employed. The closed form solutions for distributions of displacement, temperature and stresses are obtained. The solutions valid in the case of small frequency are deduced and the results are compared with the corresponding results obtained in other generalized thermoelasticity theories. Numerical results applicable to a copper-like material are also presented graphically and the nature of variations of the physical quantities with radial coordinate and with frequency of vibration is analyzed.     

GUIDED THERMOELASTIC WAVE PROPAGATION IN LAYERED PLATES WITHOUT ENERGY DISSIPATION

In this paper, the propagation of guided thermoelastic waves in laminated orthotropic plates subjected to stress-free, isothermal boundary conditions is investigated in the context of the Green-Naghdi (GN) generalized thermoelastic theory (without energy dissipation). The coupled wave equations and heat conduction equation are solved by the Legendre orthogonal polynomial series expansion approach. The validity of the method is confirmed through a comparison. The dispersion curves of thermal modes and elastic modes are illustrated simultaneously. Dispersion curves of the corresponding pure elastic plate are also shown to analyze the influence of the thermoelasticity on elastic modes. The displacement and temperature distributions are shown to discuss the differences between the elastic modes and thermal modes.     

Minimum principles for the trajectories of systems governed by rate problems

Recently, Mielke and Ortiz [2007. A class of minimum principles for characterizing the trajectories of dissipative systems, ESAIM Control Optim. Calc. Var., in press] have proposed a variational reformulation of evolutionary problems that characterizes entire trajectories of a system as minimizers of certain energy-dissipation functionals. In this paper we present two examples of energy-dissipation functionals for which relaxations and optimal scalings can be rigorously derived. The first example concerns a one-dimensional bar characterized by a quadratic dissipation function and a bistable energy density; the second example concerns the coarsening kinetics of island growth in thin films exhibiting a preferred slope. In both cases, we present closed-form relaxations in the local limit of the problem and optimal scaling relations for the nonlocal problems. The relaxations rigorously characterize macroscopic properties of complex microstructural evolution by means of well-posed effective problems. The scaling relations rigorously characterize some average properties of the coarsening kinetics of the systems and lead to predictions on the growth exponents.     

Forced dissipative Boussinesq equation for solitary waves excited by unstable topography

In the paper, the effects of topographic forcing and dissipation on solitary Rossby waves are studied. Special attention is given to solitary Rossby waves excited by unstable topography. Based on the perturbation analysis, it is shown that the nonlinear evolution equation for the wave amplitude satisfies a forced dissipative Boussinesq equation. By using the modified Jacobi elliptic function expansion method and the pseudo-spectral method, the solutions of homogeneous and inhomogeneous dissipative Boussinesq equation are obtained, respectively. With the help of these solutions, the evolutional character of Rossby waves under the influence of dissipation and unstable topography is discussed.     

Propagation of modulated nonlinear waves in a relaxing gas-liquid mixture

The propagation of nonstationary weak shock waves in a chemically active medium is essentially dispersive and dissipative. The equations for short-wavelength waves for such media were obtained and investigated in [1–4]. It is of interest to study quasimonochromatic waves with slowly varying amplitude and phase. A general method for obtaining the equations for modulated oscillations in nonlinear dispersive media without dissipation was proposed in [5–8]. In the present paper, for a dispersive, weakly nonlinear and weakly dissipative medium we derive in the three-dimensional formulation equations for waves of short wavelength and a Schrödinger equation, which describes slow modulations of the amplitude and phase of an arbitrary wave. The coefficients of the equations are particularized for the considered gas-liquid mixture. Solutions are obtained for narrow beams in a given defocusing medium as well as linear and nonlinear solutions in the neighborhood of a diffraction beam. A solution near a caustic for quasimonochromatic waves was found in [9].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 133–143, January–February, 1980.     

Energy Approach to the Formulation of Boundary Problems of Nonlinear Thermomechanics for Elastic Systems

An energy approach is proposed to derive the physical constitutive equations of nonlinear thermomechanics for inertial elastic systems. A potential of local inertial thermodynamic state and a potential of thermoelastic energy dissipation are introduced. The variational formulation of nonlinear boundary problems of thermoelasticity is implemented on the basis of the Hamiltonian energy functional. Sufficient conditions for the convexity of the functional are formulated __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 9, pp. 52–59, September 2005.     

基于离散单元法的颗粒阻尼耗能减振特性研究

采用离散单元法并从能量耗散的角度研究颗粒阻尼对系统减振特性的影响。建立了颗粒介质细观下的法向、切向和滚动方向的粘弹性接触模型和能量耗散模型,通过冲击激励和简谐激励下系统振动响应的多参数能量耗散分析来研究颗粒阻尼的耗能机理和减振特性。数值试验表明,颗粒介质可以在一个较宽的振动幅值范围内有效的发挥其阻尼效应,其耗能具有阶梯状周期性的特点。填充率是影响颗粒阻尼耗能减振效果的主要工程可控参数并对系统共振频率产生重大影响,当填充率接近极值时,系统出现无阻尼共振及共振频率超出无颗粒系统固有频率的现象。系统在最优填充率下共振时,颗粒与箱体保持恒定相位差的超振幅稳态运动。较小粒径的颗粒可以提高能量耗散率并使振动系统更快趋向静平衡状态,而恢复系数和摩擦系数则对法向和切向耗能的比值有较大影响。     

Internal waves in a two-layer electrically conducting fluid in the presence of a magnetic field

The propagation of linear and nonlinear internal waves along the interface between two weakly conducting media differing in density and electrical conductivity is investigated and the influence of MHD interaction effects on their characteristics is analyzed. It is shown that in this system the waves propagate with dispersion and dissipation, and for harmonic waves of infinitesimal amplitude there exists a range of wave numbers on which propagating modes do not exist. For waves of finite amplitude a nonlinear Schrödinger equation with a dissipative perturbation is obtained and its asymptotic solution is found. It is established that the presence of electrical conductivity and an applied magnetic field leads to a decrease in the amplitude and the frequency of the envelope of the wave train.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 104–108, September–October, 1990.     

A dynamic two-equation Sub Grid Scale model

In this paper we demonstrate that the transport equation of the generalised subgrid scale (SGS) turbulent stress tensor is form-invariant but not frame-indifferent under Euclidean transformations of the frame. A new closure equation between the generalized SGS turbulent stress tensor and the resolved kinematic quantities is proposed. The closure equation at the basis of the proposed model (Two-Equation Model, TEM): a) respects the principle of the turbulence frame indifference [1]; b) takes into account both the anisotropy of the turbulence velocity scales and turbulence length scales; c) removes any balance assumption between the production and dissipation of SGS turbulent kinetic energy; d) assumes scale similarity in the definition of the second-order tensor representing the turbulent velocity scales. In the proposed model: a) the closure coefficient C which appears in the constitutive equation is uniquely determined without using Germanos dynamic procedure [2]; b) the generalized SGS turbulent stress tensor is related exclusively to the generalized SGS turbulent kinetic energy (which is calculated by means of its balance equation) and the modified Leonard tensor; c) the viscous dissipation of the generalized SGS turbulent kinetic energy is calculated by solving the balance equation. The proposed model is tested for a turbulent channel flow at Reynolds numbers (based on friction velocity and channel half-width) ranging from 180 to 2340.Received: 11 February 2004, Accepted: 20 August 2004, Published online: 22 February 2005PACS: 02.60.Cb, 47.27.Eq, 47.11. + j Correspondence to: F. Gallerano     

Localised knife waves in a structured interface

We consider a Mode III lattice with an interface layer where the dynamic crack growth is caused by a localised sinusoidal wave. In the wave–fracture scenario, the ‘feeding wave’ (here also called the knife wave) delivers energy to the moving crack front, while the dissipative waves carry a part of this energy away from the front. The questions addressed here are:

• What are the conditions of existence of the localised knife wave?

• What is the lower bound of the amplitude of the feeding wave, which supports the crack propagation, for a given deformational fracture criterion?

• How does the crack speed depend on the amplitude of the feeding wave?

• What are the dissipative waves? How much energy is irradiated by these waves and what is the total dissipation?

• What are the conditions of existence of the steady-state regime for the propagating crack?

We consider analytically two established regimes: the steady-state regime, where the motion of neighbouring masses (along the interface) differs only by a constant shift in time, and an alternating-strain regime, where the corresponding amplitudes differ by sign. We also present the numerical simulation results for a model of a high-contrast interface structure. Along with the energy of the feeding and dissipative waves, an energy radiated to the bulk of the lattice is identified.

Macroscopic properties of a two-phase potential dispersion composed of identical unit cells

The potential flow solution for flow of fluid past dispersed objects in a “unit cell” is used to derive several macroscopic properties, including the mean pressures in the phases and on the walls, the momentum and kinetic energy density, the force function and mechanical energy flux. These properties are derived from the “resistivity” of the unit cell, which has a tensorial character in general. Various macroscopic forms of Bernoulli's equation relate the properties. Equations of motion for uniform arrays of cells are derived. Various other features, such as minimization of kinetic energy density and forces at concentration jumps, are analyzed.     

Specific hardening function definition and characterization of a multimechanism generalized potential-based viscoelastoplasticity model

Given the previous complete-potential structure framework [see Int. J. Plasticity 10(3) (1994) 263], together with the notion of strain- and stress- partitioning in terms of separate contributions of several submechanisms (viscoelastic and viscoplastic) to the thermodynamic functions (stored energy and dissipation), see [Int. J. of Plasticity 17(10) (2001) 1305], a detailed viscoelastoplastic multimechanism characterization of a specific hardening functional form of the model is presented and discussed. TIMETAL 21S is the material of choice as a comprehensive test matrix, including creep, relaxation, constant strain-rate tension tests, etc. are available at various temperatures. Discussion of these correlations tests, together with comparisons to several other experimental results, are given to assess the performance and predictive capabilities of the present model particularly with regard to the notion of hardening saturation as well as the interaction of multiplicity of dissipative (reversible/irreversible) mechanisms.     

Propagation of Thermo-Elastic Waves at Several Typical Interfaces Based on the Theory of Dipolar Gradient Elasticity

The reflection and transmission properties of thermo-elastic waves at five possible interfaces between two different strain gradient thermo-elastic solids are investigated based on the generalized thermo-elastic theory without energy dissipation(the GN theory). First, the function of free energy density is postulated and the constitutive relations are defined. Then,the temperature field and the displacement field are obtained from the motion equation in the form of displacement and the thermal transport equation without energy dissipation in the strain gradient thermo-elastic solid. Finally, the five types of thermo-elastic interfacial conditions are used to calculate the amplitude ratios of the reflection and transmission waves with respect to the incident wave. Further, the reflection and transmission coefficients in terms of energy flux ratio are calculated and the numerical results are validated by the energy conservation along the normal direction. It is found that there are five types of dispersive waves, namely the coupled longitudinal wave(the CP wave), the coupled thermal wave(the CT wave), the shear wave, and two evanescent waves(the coupled SP wave and SS wave), that become the surface waves at an interface. The mechanical interfacial conditions mainly influence the coupled CP waves, SV waves, and surface waves, while the thermal interfacial conditions mainly influence the coupled CT waves.     

Homogenization in finite thermoelasticity

A homogenization framework is developed for the finite thermoelasticity analysis of heterogeneous media. The approach is based on the appropriate identifications of the macroscopic density, internal energy, entropy and thermal dissipation. Thermodynamical consistency that ensures standard thermoelasticity relationships among various macroscopic quantities is enforced through the explicit enforcement of the macroscopic temperature for all evaluations of temperature dependent microscale functionals. This enforcement induces a theoretical split of the accompanying micromechanical boundary value problem into two phases where a mechanical phase imposes the macroscopic deformation and temperature on a test sample while a subsequent purely thermal phase on the resulting deformed configuration imposes the macroscopic temperature gradient. In addition to consistently recovering standard scale transition criteria within this framework, a supplementary dissipation criterion is proposed based on alternative identifications for the macroscopic temperature gradient and heat flux. In order to complete the macroscale implementation of the overall homogenization methodology, methods of determining the constitutive tangents associated with the primary macroscopic variables are discussed. Aspects of the developed framework are demonstrated by numerical investigations on model microstructures.