A thermal degradation mechanism of polyvinyl alcohol/silica nanocomposites

The thermal degradation mechanism of a novel polyvinyl alcohol/silica (PVA/SiO₂) nanocomposite prepared with self-assembly and solution-compounding techniques is presented. Due to the presence of SiO₂ nanoparticles, the thermal degradation of the nanocomposite, compared to that of pure PVA, occurs at higher temperatures, requires more reaction activation energy (E), and possesses higher reaction order (n). The PVA/SiO₂ nanocomposite, similar to the pure PVA, thermally degrades as a two-step-degradation in the temperature ranges of 300-450 °C and 450-550 °C, respectively. However, the introduction of SiO₂ nanoparticles leads to a remarkable change in the degradation mechanism. The degradation products identified by Fourier transform infrared/thermogravimetric analysis (FTIR/TGA) and pyrolysis-gas chromatography/mass spectrometric analysis (Py-GC/MS) suggests that the first degradation step of the nanocomposite mainly involves the elimination reactions of H₂O and residual acetate groups as well as quite a few chain-scission reactions. The second degradation step is dominated by chain-scission reactions and cyclization reactions, and continual elimination of residual acetate groups is also found in this step.     

Pretreatment of polyvinyl alcohol by electrocoagulation coupling with catalytic oxidation: Performance,mechanism and pathway

In this study, various conditions for the removal of polyvinyl alcohol (PVA) by electrocoagulation (EC) coupled catalytic oxidation are systematically studied. The direct oxidation of the anode, the reduction of the cathode, the oxidation of OH and Cl, and the synergistic effect of flocculation on the degradation of polyvinyl alcohol are investigated. It is observed that the optimum experimental conditions obtained are as follows: Cell voltage 9 V, natural pH 7, NaCl concentration 0.02 mol/L, and interelectrode distance 3.0 cm. The evolution of iron ions is also discussed in the EC process. By contrast, EC had made an outstanding contribution to the removal of PVA, which removes 71.29% of PVA. Free radicals, especially OH and Cl, are equivalent to the contribution of the electrodes in the degradation of PVA. And the contribution of PVA degradation by anode oxidation and cathode reduction are 12.76% and 8.02%, respectively. Characterization of solution and floc, such as Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), GC–MS and molecular weight, showed that PVA is effectively removed by the EC process, and a possible degradation pathway is proposed     

Optically-induced second-order nonlinear optical effect in polyvinyl alcohol photopolymers

IR induced picosecond nonlinear optical effects in polyvinyl alcohol photopolymer is investigated. The second harmonic generation (SHG) is studied versus the pump power and delaying time between the pump and probing beam (λ=1.55 and 1.32 μm, respectively). The phenomena are explained within a framework of fifth-order nonlinear optical susceptibilities. An explanation of the observed dependences is given within a framework of photostimulated vibrations, which enhance acentric electron-phonon anharmonicity. Temperature dependences of the observed phenomena fully confirm the electron-phonon anharmonic origin of the observed effect.     

Dehydration of 1,4-dioxane by pervaporation using filled and crosslinked polyvinyl alcohol membrane

Polyvinyl alcohol (PVOH) membrane, was modified both physically and chemically by incorporation of inorganic filler, sodium aluminosilicate and chemical crosslinking with maleic acid and glutaraldehyde. The change of morphology and crystallinity of PVOH by this physical and chemical modification was studied by FTIR, DSC, TGA, SEM and XRD. These membranes were evaluated in terms of its potential for dehydration of dioxane by preferential sorption and permeation using pervaporation (PV) technique. These membranes were cast in the laboratory by solution casting from the polymer and other additives. The performance of the unfilled (containing no filler) glutaraldehyde (GA) crosslinked PVOH-1 and maleic acid (MA) crosslinked PVOH-2 membranes were compared with filled (containing aluminosilicate filler) but GA crosslinked PVOH-3 and filled but MA crosslinked PVOH-4 membranes. The filled membranes were found to show higher flux and water selectivity. Among all the four used membranes, the MA crosslinked filled PVOH-4 membrane was found to show best results in terms of both water selectivity and flux.     

Separation of single-stranded oligonucleotides on polyvinyl alcohol gel column

Summary Separation mechanisms for single-stranded oligodeoxyribo-or oligoribonucleic acid fragments were explored on an Asahipak polyvinyl alcohol gel column (GS-320) by use of sequential isomers of such molecules. Substrates having different base numbers were found to be separated by size-exclusion chromatography while those having the same numbers with different base sequences were isolated by use of the reversed-phase mode. By using those dual modes, a limit for the separation of the samples was found to arise because one mode shifted the peaks of the substrates in the sense opposite to the shift resulting from the other mode and it was found that when substrates had less than nine bases, the solutes eluted separately.     

Electrically induced gel-sol transition of polyvinyl alcohol/polyacrylamide semi-interpenetrated hydrogels

Polyvinyl alcohol/polyacrylamide semi-interpenetrated hydrogels were prepared via freeze-thaw process. When a 20 V of DC was applied across the gels, the gels with lower polyacrylamide content underwent a contraction or partly turned into solution, while for the gels with higher polyacrylamide concentration, a complete gel-sol transition was observed in a short time.     

Selective separation of flavonoids with a polyvinyl alcohol membrane

In order to develop a selective membrane separation process for flavonoids, i.e. baicalin, baicalein and flavone extracted from a crude drug, “Wogon”, we have measured the permeabilities of these flavonoids through a polyvinyl alcohol membrane, together with their aqueous solubilities. The aqueous solubilities of baicalin and baicalein increase with increasing aqueous solution pH due to the acid dissociation of the saccharic carboxyl group of baicalin or the phenolic hydroxyl group of baicalein. The mass transfer coefficients of flavonoids experimentally obtained in both systems of single and mixed constituents agreed well with the calculated values based on a solution-diffusion model together with the acid dissociation of the carboxyl or hydroxyl groups of baicalin and baicalein, respectively. The selective mutual separation of flavonoids can be achieved from mixed solution of constituents in the neutral pH region. Furthermore, a quantitative discussion of the permeation behavior of flavonoids through the PVA membrane is provided from a molecular modelling computational viewpoint.     

Dehydration kinetics of polyvinyl alcohol hydrogel wound dressings during wound healing process

<正>The hydrogel wound dressing based on polyvinyl alcohol(PVA) was prepared by the freezing-thawing cyclic method.The dehydration kinetics of prepared hydrogels was determined using the experimental method and mathematical modeling based on diffusion mechanism.The results show that the dehydration rate of PVA hydrogel wound dressing inversely depends on the hydrogel thickness as well as water content of the wound.On the other hand,the initial water content of hydrogel and the atmospheric humidity have little direct effect on the dehydration rate.The good agreement between experimental and mathematical modeling results in early stages of dehydration process shows that the predominate factor determining the dehydration of these wound dressings is diffusion.     

Analysis of polyvinyl alcohol microbubbles in human blood plasma using capillary electrophoresis

Recently, a new type of ultrasound contrast agent that consists of air‐filled microbubbles stabilized with a shell of polyvinyl alcohol was developed. When superparamagnetic nanoparticles of iron oxide are incorporated in the polymer shell, a multimodal contrast agent can be obtained. The biodistribution and elimination pathways of the polyvinyl alcohol microbubbles are essential to investigate, which is limited with today's techniques. The aim of the present study was, therefore, to develop a method for qualitative and quantitative analysis of microbubbles in biological samples using capillary electrophoresis with ultraviolet detection. The analysis parameters were optimized to a wavelength at 260 nm and pH of the background electrolyte ranging between 11.9 and 12. Studies with high‐intensity ultrasonication degraded microbubbles in water showed that degraded products and intact microbubbles could be distinguished, thus it was possible to quantify the intact microbubbles solely. Analysis of human blood plasma spiked with either plain microbubbles or microbubbles with nanoparticles demonstrated that it is possible to separate them from biological components like proteins in these kinds of samples.     

Characterization of Mn doped ZnS nanocrystalline powder dispersed in polyvinyl alcohol: 1st Nano Update

Manganese doped zinc sulfide nanocrystalline powder was synthesized with sodium citrate and its films were formed by mixing it with polyvinyl alcohol to study optical absorption of Mn doped ZnS dispersed in polyvinyl alcohol. The characteristics of the prepared powder and film samples were studied by X-ray diffraction, transmission electron microscopy and UV–visible absorption spectroscopy. Samples exhibited optical absorption at lower wavelength region and particle sizes were calculated from X-ray diffractogram.     

Preparation and photochromic properties of pyrazolones/polyvinyl alcohol composite films

Novel photochromic composite films have been successfully fabricated by dispersing pyrazolone derivative:1,3-Diphenyl-4-(3-chlorobenzal)-5-hydroxypyrazole 4-phenylsemicarbazone (1a) into hydrosol of polyvinyl alcohol (PVA). The microstructure, photochromic behaviors and thermal bleaching properties were investigated by Raman spectroscopy, X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and ultraviolet-visible absorption spectroscopy (UV-vis). The results showed that 1a was not only blended but also well dispersed in the PVA polymer films with a suitable content of chromophore. Upon UV light irradiation, the composite films gradually changed from colorless to yellow and recovered fully to the initial state upon thermal bleaching. The time constants of photochromic reactions were almost the same as those of 1a observed in their crystalline state, indicating that the photochromic phenomenon is barely disturbed by the polymer matrix.     

Novel covalently coated diazoresin/polyvinyl alcohol capillary column for the analysis of proteins by capillary electrophoresis

A novel method for the preparation of covalently linked capillary coatings of PVA was demonstrated using photosensitive diazoresin (DR) as coupling agents. Layer‐by‐layer self‐assembly film of DR and PVA based on hydrogen bonding was first fabricated on the inner wall of capillary, then the hydrogen bonding was converted into covalent bonding after treatment with UV light through the unique photochemistry reaction of DR. The covalently bonded coatings suppressed basic protein adsorption on the inner surface of capillary, and thus a baseline separation of lysozyme, cytochrome c and BSA was achieved using CE. Compared with bare capillary or noncovalently bonded DR/PVA coatings, the covalently linked DR/PVA capillary coatings not only improved the CE separation performance for proteins, but also exhibited good stability and repeatability. Due to the replacement of highly toxic and moisture‐sensitive silane coupling agent by DR in the covalent coating preparation, this method may provide a green and easy way to make the covalently coated capillaries for CE.     

Blended chitosan and polyvinyl alcohol membranes for the pervaporation dehydration of isopropanol

Homogeneous membranes were prepared by casting the solution of blended chitosan and polyvinyl alcohol (PVA) on a glass plate. The percent weight of chitosan in the membrane was varied from 0 to 100%. The membrane thickness was in the range of 15–30 μm. The membranes were heat treated at 150 °C for an hour. After that the membranes were crosslinked by glutaraldehyde and sulfuric acid in acetone aqueous solution. The membranes were tested at 30–60 °C for dehydration performance of 50–95% isopropanol aqueous solutions. At around 90% of isopropanol in the feed mixture, permeate flux increased whereas the percent of water in permeate tended to decrease when the feed temperature increased for all membranes, except that the water content in permeate from the membrane containing 75 wt.% chitosan remained constant. The swelling degree in water and the total flux increased with increasing chitosan content in membranes. The effect of temperature on permeate flux followed the Arrhenius relationship. The permeate flux decreased when isopropanol in the feed increased for all membranes. However, water content in permeate and isopropanol concentration in the feed formed complex relationship for different chitosan content membranes. Sorption did not appear to have significant effects on separation. The membrane containing chitosan 75% performed the best. For a feed solution containing 90% isopropanol at 60 °C, the permeate flux was 644 g/m² h with water content of nearly 100% in the permeate. At 55% isopropanol in the feed at 60 °C, the permeate flux was 3812 g/m² h. In the range of 55–95% of isopropanol in the feed, the water content in permeate was more than 99.5%. This membrane showed very excellent performance with good mechanical strength. It is promising to develop this membrane for industrial uses.     

Ion-exclusion chromatography of aliphatic car☐ylic acids on a cation-exchange resin by elution with polyvinyl alcohol

Ion-exclusion chromatography of aliphatic car☐ylic acids of different acidity (pK_a) and hydrophobicity was investigated on a polystyrene-divinylbenzene (PS-DVB) based strongly acidic cation-exchange resin in the H⁺ form and conductivity detection by elution with polyvinyl alcohol (PVA). When water was used as an eluent, the resolution of the car☐ylic acids was very low and the peak accompanied a fronting depending on their hydrophobicities. Therefore, to improve the peak shape and the peak resolution, aqueous eluents containing PVAs (degrees of polymerization, n=500, 1500and2000) with many OH groups were tested for the ion-exclusion chromatographic separation of the car☐ylic acids. When aqueous eluents containing PVA were used, the fronting was decreased dramatically by the effect of increased hydrophilicity of the PS-DVB cation-exchange resin surface due to adsorption of OH group in PVA. The high resolution ion-exclusion chromatographic separation without the fronting and highly sensitive conductimetric detection of the car☐ylic acids was accomplished successfully by elution with a 0.2% PVA (n=1500)-10% methanol-water.     

Studies on separation mechanisms of biological molecules on a polyvinyl alcohol column

Summary The chromatographic separation mechanism on a polyvinyl alcohol (PVA) column in aqueous systems was explored utilizing several different types of compound such as polyethylene glycols, carbohydrates, pyrimidine and purine bases, fatty acids, monophosphate nucleotides and glycyl-peptides. Two types of separation mechanisms were found to occur for these substrates. The polyethylene glycols and the carbohydrates were eluted by size-exclusion chromatography. The retention behavior of the other substrates could be explained by the solvophobic theory, suggesting that the predominant separation mode was reversed-phase chromatography. The occurrence of reversed-phase chromatography was also indicated by the remarkable effect of the addition of ion-association reagents to the chromatographic system on the retention of the monophosphate nucleotides.     

Enhancement in sensitivity of nitro blue tetrazolium polyvinyl alcohol film dosimeters by sodium formate and Triton X-100

Nitro blue tetrazolium polyvinyl alcohol film dosimeters, NBT-PVA were prepared and evaluated based on radiation-induced reduction of NBT²⁺. NBT-PVA film dosimeters containing different concentrations of NBT dye from 1 to 5 mM were prepared in a solution of ethanol. The dosimeters were irradiated with ?-ray from ⁶⁰Co source at doses up to 50 kGy. UV/vis spectrophotometer was used to investigate the optical density of un-irradiated and irradiated films in terms of absorbance at 529 nm. The absorbance increases with absorbed dose up to 50 kGy for NBT-PVA film dosimeters. The dose sensitivity of NBT-PVA film increases strongly with increase of concentrations of NBT dye. The effects of irradiation temperature, humidity, dose rate and the stability of the response of the films after irradiation were investigated. A considerable increase was observed in the dose response of NBT-PVA film by adding appropriate concentration of sodium formate and Triton X-100.     

Shape memory hybrid based on polyvinyl alcohol and 0D silver nanoparticles

Shape memory hybrids (SMH) have drawn significant attention because they allow an easy alternative for the design of shape memory materials with tailored properties or features. In this work, a shape memory hybrid was made, based on polyvinyl alcohol (PVA) as the elastic domain and 0D silver nanoparticles (Agnps) as the transition domain, a dissolution method of mixing both components, and evaporation of water afterward allowed the formation of films of the hybrid material. Two different size distributions of silver nanoparticles were used (13.7 ± 2.6 and 67.9 ± 14.1 nm), in order to study the effect of the size on the shape memory effect (SME) of the final SMH, under temperature stimuli. The materials obtained were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy, infrared spectroscopy (IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques. The crystallinity of PVA was slightly altered with the addition of Agnps. Finally, the shape memory effect was tested on both hybrid materials, resulting in a better response to temperature for the SMH prepared with Agnps of 68 nm, also the shape recovery time can be tuned varying both the increase of temperature and the size distribution of Agnps used.     

粘度法测定部分水解聚丙烯酰胺的分子量

在 2 5℃、浓度为 1mol L的NaCl水溶液中 ,测定了聚合度 (DP)为 1 48× 10 3～ 3 79× 10 4的聚丙烯酰胺 (PAM)及其水解度 (h)在 0 %～ 70 %之间的部份水解聚丙烯酰胺 (HPAM)的特性粘度 ([η]) .根据聚电解质理论和Kowblansky的研究结果 ,建立了特性粘度 [η]与聚合度DP、水解度h之间的定量关系式 :[η]=0 1113DP0 83 2 9+0 9973DP0 753 1 (1- 0 81h1 2 )h .用该式处理方献数据 ,其平均误差为 13 74%     

Effect of polyvinyl alcohol on rare earths (Gd and Tb) separation by extraction resin

Small amounts of polyvinyl alcohol (PVA; 0.5-1.5 wt.%) added to extraction resin was synthesized by suspension polymerization. Their effects on the separation of rare earths (RE) were then investigated by conducting a relative comparison with the performance of pure extraction resin. The supporter and extractant of extraction resin were styrene-divinyl benzene copolymer and 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]), respectively. The size of PVA added extraction resin was reduced by 40% particle size of pure extraction resin. Furthermore, a higher level of PVA addition, shorter effluent range and smaller resolution values were shown in the extraction. In constant PVA added extraction resin, more diluted effluent concentration, longer effluent range and bigger resolution values were shown in the extraction. This could be the result of the bonding force between the rare earths and the extraction resin due to the nature of the interaction between the OH⁻ group in PVA and the OH⁻ group in extractants such as HEH[EHP]. Thus, the bonding force between the RE and extractants was determined by the level of PVA in the resins and the acidity of the effluent solution became another important factor in the extraction performance of the rare earths. As a result, the optimal level of PVA addition and the concentration of effluent for RE (Gd and Tb) separation were determined to be 0.5 wt.% of PVA and 0.05 M HCl of effluent, respectively.     

Improved cellular response on multiwalled carbon nanotube-incorporated electrospun polyvinyl alcohol/chitosan nanofibrous scaffolds

We report the fabrication of multiwalled carbon nanotube (MWCNT)-incorporated electrospun polyvinyl alcohol (PVA)/chitosan (CS) nanofibers with improved cellular response for potential tissue engineering applications. In this study, smooth and uniform PVA/CS and PVA/CS/MWCNTs nanofibers with water stability were formed by electrospinning, followed by crosslinking with glutaraldehyde vapor. The morphology, structure, and mechanical properties of the formed electrospun fibrous mats were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and mechanical testing, respectively. We showed that the incorporation of MWCNTs did not appreciably affect the morphology of the PVA/CS nanofibers; importantly the protein adsorption ability of the nanofibers was significantly improved. In vitro cell culture of mouse fibroblasts (L929) seeded onto the electrospun scaffolds showed that the incorporation of MWCNTs into the PVA/CS nanofibers significantly promoted cell proliferation. Results from this study hence suggest that MWCNT-incorporated PVA/CS nanofibrous scaffolds with small diameters (around 160 nm) and high porosity can mimic the natural extracellular matrix well, and potentially provide many possibilities for applications in the fields of tissue engineering and regenerative medicine.