Synthesis,crystal structure,electronic structure and electrical conductivity of La3GeSb0.31Se7 and La3SnFe0.61Se7

The selenides La₃EM_1−xSe₇ (La₆E₂M_2−xSe₁₄) adopt the Ce₆Al_3.33S₁₄ structure type. La₃GeSb_0.31Se₇ and La₃SnFe_0.61Se₇ crystallize in the non-centrosymmetric space group P6₃ with La replacing Ce in the 6c site, E = Ge or Sn replacing Al in the 2b site and M = Fe or Sb replacing the other, deficient Al site (2a). The structure contains La atoms in square antiprisms of Se atoms, isolated distorted [ESe₄] tetrahedra, and face sharing distorted [MSe₆] octahedra forming a linear chain along the c-axis with short M–M distances. Band structure calculations predict semiconducting character with different gaps, which was demonstrated by electrical conductivity measurements and reflected in their different colors.     

Monoclinic Cu2Se3Sn

A previously unknown modification of dicopper(I) triselenostannate(IV), Cu₂Se₃Sn, has been obtained from the Cu₂Se–SnSe₂ quasi‐binary system and investigated using X‐ray single‐crystal diffraction. The Se atoms are stacked in a closest‐packed arrangement with the layers in the sequence ABC. The Cu atoms occupy one‐third of the tetrahedral interstices, whereas the Sn atoms are located in one‐sixth of the tetrahedral interstices. All the atoms occupy general positions. The structure possesses pseudo‐inversion symmetry. The Cu₂Se₃Sn structure investigated in this paper (96 atoms per unit cell, ordered distribution of Cu and Sn over 12 cation positions) is a superstructure of the reported cubic (eight atoms per unit cell, random distribution of Cu and Sn over one cation position) and monoclinic (24 atoms per unit cell, ordered distribution of Cu and Sn over three cation positions) modifications.     

ChemInform Abstract: Metal ion Displacements in Noncentrosymmetric Chalcogenides La3Ga1.67S7, La3Ag0.6GaCh7 (Ch: S,Se), and La3MGaSe7 (M: Zn,Cd).

The ternary and quaternary Ga‐containing chalcogenides of title are prepared by solid state reactions of the elements in stoichiometric quantities (evacuated silica tubes, 950 °C, 3 d).     

Reactions between YBa2Cu3O7−δ and La2O3 and SrCO3

Solid state reactions at 925°C between the high-T _c ceramic superconductor YBa₂Cu₃O_7?δ and La₂O₃ and SrCO₃, respectively, mixed in various molar ratiosr=MeO_n/YBa₂Cu₃O_7?δ, were studied using X-ray powder diffraction and scanning electron microscopy. The reaction between YBa₂Cu₃O_7?δ and La₂O₃ yielded (La_1?xBa_x)₂CuO_4?δ, withx≈0.075?0.10. La_2?xBa_1+xCu₂O_6?δ, withx≈0.2?0.25 and La-doped (Y_1?xLa_x)₂BaCuO₅, withx≈0.10?0.15. Forr=3.0, Y-doped La₂BaCuO₅ resulted also. The reaction between YBa₂Cu₃O_7?δ and SrCO₃ yielded (Sr_1?zBa_z)₂CuO₃, withz≈0.1, Y₂(Ba_1?zSr_z)CuO₅, withz=0.1?0.15, and a nonsuperconducting compound with an approximate composition of Y(Ba_0.5Sr_0.5)₅Cu_3.5O_10±δ. At values ofr≤2.0, unsubstituted YBa₂Cu₃O_7?delta was found in the reaction products.     

Interaction between Cr2Se3 and Cu2GeSe3

The interaction along the Cu₂GeSe₃-Cr₂Se₃ join has been investigated using differential thermal and X-ray powder diffraction analyses. It has been found that the join is quasi-binary with a degenerate eutectic based on the Cu₂GeSe₃ compound. Two new quaternary compounds have been found along the join, namely, Cu₂GeCr₆Se₁₂ and the γ phase. The phase is formed at 915°C by the peritectic reaction L + β-Cr₂Se₃ = γ and has the primary crystallization region up to 9 mol % Cr₂Se₃ in the temperature range 758–915°C. The room-temperature homogeneity range of the γ phase is 65–70 mol % Cr₂Se₃. The Cu₂GeCr₆Se₁₂ compound is formed by the peritectoid reaction γ + β-Cr₂Se₃=Cu₂GeCr₆Se₁₂ at 880°C, and its homogeneity range is 73–79 mol %. The X-ray reflections of the γ phase are indexed for the tetragonal crystal system with the unit cell parameters a = 12.043 Å and c = 9.180 Å. Samples with ferromagnetic properties are found in the homogeneity regions of both compounds.     

Superconductivity and the Anomalous Meissner Effect in La3CaBa3Cu7O15,5 + x Oxide

A superconducting oxide with a stoichiometry La₃CaBa₃Cu₇O_15.5+x, in which x = 0.75, was prepared. It had a tetragonal triple-perovskite structure with lattice parameters a = 3.879 Å and c = 11.637 Å. According to resistivity measurements, a sharp superconducting transition, ΔT_c(10-90%) = 1.5 K, and T_c(zero) = 80 K were observed. When it was measured at a small magnetic field (10-20 gauss) with field cooling, the sintered pellet showed a positive magnetic susceptibility, but the powdered sample exhibited (he diamagnetism of a typical superconductor. However, no peculiar shielding effect was found in both the sintered and powdered samples.     

Mixed Cu2Se Hexagonal Nanosheets@Co3Se4 Nanospheres for High-Performance Asymmetric Supercapacitors

Rational designing and constructing multiphase hybrid electrode materials is an effective method to compensate for the performance defects of the single component. Based on this strategy, Cu₂Se hexagonal nanosheets@Co₃Se₄ nanospheres mixed structures have been fabricated by a facile two-step hydrothermal method. Under the synergistic effect of the high ionic conductivity of Cu₂Se and the remarkable cycling stability of Co₃Se₄, Cu₂Se@Co₃Se₄ can exhibit outstanding electrochemical performance as a novel electrode material. The as-prepared Cu₂Se@Co₃Se₄ electrode displays high specific capacitance of 1005 F g⁻¹ at 1 A g⁻¹ with enhanced rate capability (56 % capacitance retention at 10 A g⁻¹), and ultralong lifespan (94.2 % after 10 000 cycles at 20 A g⁻¹). An asymmetric supercapacitor is assembled applying the Cu₂Se@Co₃Se₄ as anode and graphene as cathode, which delivers a wide work potential window of 1.6 V, high energy density (30.9 Wh kg⁻¹ at 0.74 kW kg⁻¹), high power density (21.0 Wh kg⁻¹ at 7.50 kW kg⁻¹), and excellent cycling stability (85.8 % after 10 000 cycles at 10 A g⁻¹).     

Anab initio investigation of Cu2Se and Cu4Se2

Summary Experimentally known copper selenium clusters show extraordinary geometrical features, especially short Cu-Cu distances. We report the first theoretical investigation of Cu₂Se and Cu₄Se₂. Various quantum chemical methods (SCF, MP2, CPF, CCSD, CCSD(T), LDF) are applied to determine the importance of dynamic electron correlation. We find that inclusion of correlation does not essentially change the electronic structure of the clusters but has a strong influence on geometries. To reduce the computational effort we apply effective core potentials (ECPs) in combination with small, but carefully optimized basis sets. The applicability of simple modellings of correlation energies for approximate inclusion of correlation effects in SCF geometry optimizations is tested.     

电流注入对La0.8Te0.2MnO3/YBa2Cu3O7-δ双层结构中YBa2Cu3O7-δ超导电性的影响

用电泳法在厚度为5 mm×10 mm×0.5 mm的YBa2Cu3O7-δ上沉积厚约70 μm的 La0.8Te0.2MnO3 形成La0.8Te0.2MnO3/YBa2Cu3O7-δ (F/S)双层结构. 通过扫描电子显微镜观察双层结构剖面的形貌, 采用标准的四引线法测量YBa2Cu3O7-δ层的电阻特性. 在F/S双层结构中通入1 mA的注入电流, 无论电流从S层流入F层( Iinj), 或者电流从F层流入S层(-Iinj), 正常电阻均比未加注入电流时的电阻低; 超导转变温度均比未加注入电流的转变温度高.     

Syntheses, crystal structures, and physical properties of La5Cu6O4S7 and La5Cu6.33O4S7

Single crystal and bulk powder samples of the quaternary lanthanum copper oxysulfides La5Cu6.33O4S7 and La5Cu6O4S7 have been prepared by means of high-temperature sealed-tube reactions and spark plasma sintering, respectively. In the structure of La 5Cu6.33O4S7, Cu atoms tie together the fluorite-like (2)infinity[La5O4S(5+)] and antifluorite-like (2) infinity[Cu6S6(5-)] layers of La5Cu6O4S7. The optical band gap, E g, of 2.0 eV was deduced from both diffuse reflectance spectra on a bulk sample of La5Cu6O4S7 and for the (010) crystal face of a La 5Cu6.33O4S7 single crystal. Transport measurements at 298 K on a bulk sample of La 5Cu 6O 4S 7 indicated p-type metallic electrical conduction with sigma electrical =2.18 S cm(-1), whereas measurements on a La 5Cu6.33O4S7 single crystal led to sigma electrical =4.5 10(-3) S cm(-1) along [100] and to semiconducting behavior. In going from La 5Cu6O4S7 to La5Cu6.33O4S7, the disruption of the (2)infinity[Cu6S6(5-)] layer and the decrease in the overall Cu(2+)(3d(9)) concentration lead to a significant decrease in the electrical conductivity.     

The crystal structures of Co3Se4 and Co7Se8

The crystal structures of Co₃Se₄ and Co_6.8Se₈ have been refined from twinned single crystal and powder X-ray diffraction data. The refined structures are isostructural to the Cr_3±xSe₄ and Cr₇Se₈ types, respectively. The structures are described as superstructures of the Cd(OH)₂-type structure, where the empty layers of unoccupied octahedra are replaced with alternating Co filled and empty [100] rods and Co filled Kagomè nets for Co₃Se₄ and Co_6.8Se₈, respectively. The structure of Co₃Se₄ is not a substructure of Co₇Se₈ and the path from Co₇Se₈ to Co₃Se₄ by removing 1/4 of the Co atoms in the Kagomè nets involves both gain and loss of symmetry. Yet the refinements of Co_6.8Se₈ suggest an extended homogeneity field.     

La0.5R0.5Ba2Cu3O7,Pr0.5R0.5Ba2Cu3O7以及RBa2Cu3o7（R=稀土）的键共价性计

使用复杂晶体化学键理论计算了Ｌａ０．５Ｒ０．５Ｂａ２Ｃｕ３Ｏ７（Ｒ＝Ｐｒ,Ｎｄ,Ｓｍ,Ｅｕ,Ｇｄ,Ｄｙ,Ｙ,Ｈｏ,Ｅｒ,Ｔｍ,Ｙｂ,Ｌｕ）（Ｌａ－Ｒ１２３）,Ｐｒ０．５Ｒ０．５Ｂａ２Ｃｕ３Ｏ７（Ｒ＝Ｌａ,Ｎｄ,Ｓｍ,Ｅｕ,Ｇｄ,Ｄｙ,Ｈｏ,Ｙ,Ｅｒ,Ｔｍ,Ｙｂ,Ｌｕ）（Ｐｒ－Ｒ１２３）以及ＲＢａ２Ｃｕ３Ｏ７（Ｒ＝Ｌａ,Ｐｒ,Ｎｄ,Ｓｍ,Ｅｕ,Ｇｄ,Ｄｙ,Ｈｏ,Ｙ,Ｅｒ,Ｔｍ）（Ｒ１２３）中Ｃｕ－Ｏ键的键共价性,结果表明Ｐｒ－Ｒ１２３,Ｌａ－Ｒ１２３,以及Ｒ１２３都应具有超导性,而实验结果是Ｌａ０．５Ｐｒ０．５Ｂａ２Ｃｕ０７,Ｒ０．５,Ｐｒ０．５Ｂａ２Ｃｕ３Ｏ７（Ｒ＝Ｌａ,Ｎｄ,Ｓｍ,Ｅｕ,Ｇｄ）无超导性,产生这种矛盾的原因尚不明确,需要做进一步的研究。     

Orthogonal spin arrangement in quasi-two-dimensional La2Co2O3Se2

The crystal, electronic, and magnetic structures of the cobalt oxyselenide La(2)Co(2)O(3)Se(2) were investigated through powder neutron diffraction measurements and band structure calculations. This oxyselenide crystallizes in a tetragonal layered structure with space group I4/mmm. The Co ion is sixfold-coordinated by two oxide ions and four selenide ions, and the face-sharing CoO(2)Se(4) octahedra form Co(2)OSe(2) layers. The band structure calculations revealed that the Co ion is in the divalent high-spin state. Rietveld analysis of the neutron diffraction profiles below 200 K demonstrated that the Co moments have a noncollinear antiferromagnetic structure with the propagation vector k = (?, ?, 0). The ordered magnetic moment was determined to be 3.5 μ(B) at 10 K, and the directions of the nearest-neighbor Co moments are orthogonal each other in the c plane.     

Synthese und Kristallstruktur von Cs3Y7Se12

Synthesis and Crystal Structure of Cs₃Y₇Se₁₂ The oxidation of yttrium metal with selenium in the presence of CsCl (7 d, 700°C, evacuated silicia tubes) results in the formation of pale yellow, lath-shaped single crystals of Cs₃Y₇Se₁₂. The crystal structure (orthorhombic, Pnnm, Z = 2, a = 1272.8(3), b = 2627.7(5), c = 413.32(8) pm) consists of edge- and vertex-connected [YSe₆] octahedra forming a rocksalt-related network [Y₇Se₁₂]^3?. One-dimensional infinite channels along [001], apt to take up extra cations, provide coordination numbers of 6 and 7 + 1, respectively, for two crystallographically different Cs⁺.     

Syntheses and Crystal Structures of Rb2B2Se7, Tl2B2Se7, Cs3B3Se10, and Tl3B3Se10: New Perseleno‐selenoborates with Polymeric Anionic Chains

The perseleno‐selenoborates Rb₂B₂Se₇ and Cs₃B₃Se₁₀ were prepared from the metal selenides, amorphous boron and selenium, the thallium perseleno‐selenoborates Tl₂B₂Se₇ and Tl₃B₃Se₁₀ directly from the elements in evacuated carbon coated silica tubes by solid state reactions at temperatures between 920 K and 950 K. All structures were refined from single crystal X‐ray diffraction data. The isotypic perseleno‐selenoborates Rb₂B₂Se₇ and Tl₂B₂Se₇ crystallize in the monoclinic space group I 2/a (No. 15) with lattice parameters a = 12.414(3) Å, b = 7.314(2) Å, c = 14.092(3) Å, β = 107.30(3)°, and Z = 4 for Rb₂B₂Se₇ and a = 11.878(2) Å, b = 7.091(2) Å, c = 13.998(3) Å, β = 108.37(3)° with Z = 4 for Tl₂B₂Se₇. The isotypic perseleno‐selenoborates Cs₃B₃Se₁₀ and Tl₃B₃Se₁₀ crystallize in the triclinic space group P1 (Cs₃B₃Se₁₀: a = 7.583(2) Å, b = 8.464(2) Å, c = 15.276(3) Å, α = 107.03(3)°, β = 89.29(3)°, γ = 101.19(3)°, Z = 2, (non‐conventional setting); Tl₃B₃Se₁₀: a = 7.099(2) Å, b = 8.072(2) Å, c = 14.545(3) Å, α = 105.24(3)°, β = 95.82(3)°, γ = 92.79(3)°, and Z = 2). All crystal structures contain polymeric anionic chains of composition ([B₂Se₇]^2–)_n or ([B₃Se₁₀]^3–)_n formed by spirocyclically fused non‐planar five‐membered B₂Se₃ rings and six‐membered B₂Se₄ rings in a molar ratio of 1 : 1 or 2 : 1, respectively. All boron atoms have tetrahedral coordination with corner‐sharing BSe₄ tetrahedra additionally connected via Se–Se bridges. The cations are situated between three polymeric anionic chains leading to a nine‐fold coordination of the rubidium and thallium cations by selenium in M₂B₂Se₇ (M = Rb, Tl). Coordination numbers of Cs⁺ (Tl⁺) in Cs₃B₃Se₁₀ (Tl₃B₃Se₁₀) are 12(11) and 11(9).     

Synthesis and Single Crystal Structure of RbEr_2Cu_3Se_5

1 INTRODUCTION Halide fluxes are excellent media for growing single crystals of chalcogenides[1~3]. It is well known that during the single crystal growth via flux methods, occasional inclusion of the flux elements in the structure leads to the formation of new phases[4~9]. Several rare earth chalcogenides have been prepared through such reactive halid flux methods[4~9]. Thus we used RbCl as reactive flux to explore a new quaternary selenide by the reaction of ErCuSe precursor with Rb…