2,2′,3,3′,4,4′,5,5′,6,6′‐Decafluoro­diphenyl­amine and its 1:1 cocrystal with diphenyl­amine

In the structures of deca­fluoro­diphenyl­amine, C₁₂HF₁₀N, and its 1:1 cocrystal with diphenyl­amine, C₁₂HF₁₀N·C₁₂H₁₁N, the mol­ecules are located on special positions of C₂ symmetry. The NH groups are not involved in hydrogen bonding and the usual face‐to‐face stacking inter­actions between phenyl and penta­fluoro­phenyl rings are not observed in the cocrystal.     

2,2′,4,4′,6,6′‐Hexa­methyl‐4,4′‐bi­[4H‐pyran­yl]

The title mol­ecule, C₁₆H₂₂O₂, reveals C_i point symmetry in the crystal structure. The structure was disordered. The pyran ring is not planar; the O atom lies significantly out of the least‐squares plane (ten times the r.m.s. deviation of all six atoms).     

3,3′,5,5′‐Tetramethyl‐4,4′‐bipyrazole–pentafluorophenol (2/3)

In the title compound, 2C₁₀H₁₄N₄·3C₆HF₅O, one of the pentafluorophenol molecules resides on a mirror plane bisecting the O...F axis. The components aggregate by N—H...N, N—H...O and O—H...N hydrogen bonds involving equal disordering of the H atoms into molecular ensembles based on a 2:1 pyrazole–phenol cyclic pattern [O...N = 2.7768 (16) Å and N...N = 2.859 (2) Å], crosslinked into one‐dimensional columns via hydrogen bonding between the outer pyrazole groups and additional pentafluorophenol molecules. The latter yields a 1:1 pyrazole–phenol catemer with alternating strong O—H...N [2.5975 (16) Å] and weaker N—H...O [2.8719 (17) Å] hydrogen bonds. This is the first reported molecular adduct of a pentafluorinated phenol and a nitrogen base, and suggests the utility of highly acidic phenols and pyrazoles for developing hydrogen‐bonded cocrystals.     

Oxydative Aryl-Aryl-Verknüpfung von 6,6′,7,7′-Tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-biisochinolin-Derivaten

Oxidative Aryl-Aryl-Coupling of 6,6′,7,7′-Tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-biisoquinoline Derivatives We describe the synthesis of 2 by intramolecular oxidative coupling of 1, 1′-biisoquinoline derivatives 1 (Scheme 1). This heterocyclic system can be considered as a union of two apomorphine molecules and may thus exhibit dopaminergic activity. - The readily available tetrahydrobiisoquinoline 6 was methylated to 11 (Scheme 4) and reduced (with NaBH₃CN) to rac- 7 and (catalytically) to meso- 7 (Scheme 3). Reduction of 11 with NaBH₄ and of the biurethane rac- 9 with LiAlH₄/AlCl₃ afforded meso- and rac- 10 , respectively (Scheme 4). Demethylation of 6 , meso- 10 , meso- and rac- 7 led to 12 , meso- 14 , meso- and rac- 13 , respectively (Scheme 5). The latter two phenols were converted with chloroformic ester to the hexaethoxycarbonyl derivatives meso- and rac- 15 and subsequently saponified to the biurethanes meso- and rac- 16 , respectively (Scheme 5). - In order to assure proximity of the two aromatic rings, the ethano-bridged derivatives meso- and rac- 18 were prepared by condensing meso- and rac- 7 with oxalic ester and reducing the oxalyl derivatives meso- and rac- 17 with LiAlH₄/AlCl₃, respectively (Scheme 6). The ¹H-NMR, spectra at different temperatures showed that rac- 18 populated two conformers but rac- 17 only one, all with C₂-symmetry, and that meso- 17 as well as meso- 18 populated two enantiomeric conformers with C₁-symmetry. Whereas both oxalyl derivatives 17 were fairly rigid due to the two amide groupings, the ethano derivatives 18 exhibited coalescence temperatures of -20 and 30°. - The intramolecular coupling of the two aromatic rings was successful under ‘non-phenolic oxidative’ conditions with the tetramethoxy derivatives 7, 10 and 18 , the rac-isomers leading to the desired dibenzophenanthrolines, the meso-isomers, however, mostly to dienones (Scheme 9): With VOF₃ and FSO₃H in CF₃COOH/CH₂Cl₂ rac- 7 was converted to rac- 19 , rac- 18 to rac- 21 and rac- 10 to a mixture of rac- 20 and the dienone 23b of the morphinane type. Under the same conditions meso- 10 was transformed to the dienone 23a of the morphinane type, whereas meso- 18 yielded the dienone 24 of the neospirine type, both in lower yields. The analysis of the spectral data of the six coupling products offers evidence for their structures. With the demethylation of rac- 20 and rac- 21 to rac- 25 and rac- 26 , respectively, the synthetic goal of the work was reached, but only in the rac-series (Scheme 10). - In the course of this work two cleavages of octahydro-1,1′-biisoquinolines at the C(1), C(1′)-bond were observed: (1) The biurethanes 9 and 16 in both the meso- and rac-series reacted with oxygen in CF₃COOH solution to give the 3,4-dihydroisoquinolinium salts 27 and 28 ; the latter was deprotonated to the quinomethide 30 (Scheme 11). (2) Under the Clarke-Eschweiler reductive-methylation conditions meso- and rac- 7 were cleaved to the tetrahydroisoquinoline derivative 32 .     

Energetic Materials Based on 5,5′‐Diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole

A simple and straightforward synthesis of 5,5′‐diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole by the selective nitration of 4,4′,5,5′‐tetraamino‐3,3′‐bi‐1,2,4‐triazole is presented. The interaction of the amino and nitramino groups improves the energetic properties of this functionalized bitriazole. For a deeper investigation of these properties, various nitrogen‐rich derivatives were synthesized. The new compounds were investigated and characterized by spectroscopy (¹H and ¹³C NMR, IR, Raman), elemental analysis, mass spectrometry, differential thermal analysis (DTA), X‐ray analysis, and impact and friction sensitivities (IS, FS). X‐ray analyses were performed and deliver insight into structural characteristics with which the stability of the compounds can be explained. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory, revealing highly positive heats of formation. The energetic performance of the new molecules was predicted with the EXPLO5 V6.02 computer. A small‐scale shock reactivity test (SSRT) and a toxicity test gave a first impression of the performance and toxicity of selective compounds.     

Metal Salts of 3,3′‐Diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole in Pyrotechnic Compositions

The synthesis of alkali and alkaline earth salts of 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole (H₂ANAT) is reported. The fast and convenient three steps reaction toward the target compounds does not require any organic solvents. In addition to an intensive characterization of all synthesized metal salts, the focus was on developing chlorine and nitrate‐free red‐light‐generating pyrotechnical formulations. Strontium 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bitriazolate hexahydrate served as colorant and oxidizer in one molecule. The energetic properties of all developed pyrotechnical formulations assure safe handling and manufacturing.     

High solubility,low‐dielectric constant,and optical transparency of novel polyimides derived from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4″‐isopropyltoluene

A series of novel polyimides (PIs) ( 3a–d ) were prepared from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4 ″ ‐isopropyltoluene ( 1 ) with four aromatic dianhydrides via a one‐step high temperature polycondensation procedure. The obtained PIs showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents and chlorinated solvents. Their films were nearly colorless and exhibited high‐optical transparency, with the UV cutoff wavelength in the range of 328–353 nm and the transparency at 450 nm >80%. They also showed low‐dielectric constant (2.49–2.94 at 1 MHz) and low‐water absorptions (0.44–0.65%). Moreover, these PIs possessed high‐glass transition temperatures (T_g) beyond 327 °C and excellent thermal stability with 10% weight loss temperatures in the range of 530–555 °C in nitrogen atmosphere. In comparison with some fluorinated poly(ether imide)s derived from the trifluoromethyl‐substituted bis(ether amine)s, the resultant PIs 3a–d showed better solubility, lower cutoff wavelength, and higher T_g. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3309–3317, 2009     

meso‐2,2′‐Di­phenyl‐3,3′,4,4′‐tetra­hydro‐2,2′‐bi­furan‐5,5′(2H,2′H)‐dione

The crystal structure of the title compound, C₂₀H₁₈O₄, contains a crystallographic inversion center. The C—C bond linking the two halves of the mol­ecule is slightly elongated at 1.577 (3) Å.     

C2-Symmetric 4,4′,5,5′-Tetrahydrobi(oxazoles) and 4,4′,5,5′-Tetrahydro-2,2′-methylenebis[oxazoles] as Chiral Ligands for Enantioselective Catalysis Preliminary Communication

The synthesis of a series of enantiomerically pure, C₂-symmetric 4,4′,5,5′-tetrahydro-2,2′-methylenebis[oxazoles] and 4,4′,5,5′-tetrahydro-2,2′-bi(oxazoles) is reported. Copper complexes with anionic tetrahydromethylenebis[oxazole] ligands are efficient catalysts for the enantioselective cyclopropane formation from olefins and diazo compounds (up to 96% ee in the reaction of styrene with menthyl diazoacetate). Tetrahydrobi(oxazole)iridium(I) complexes were found to catalyze transfer hydrogenations of aryl alkyl ketones with i-PrOH (up to 91% ee). Tetrahydrobi(oxazole)palladium complexes can be used as enantioselective catalysts for allylic nucleophilic substitution (up to 77% ee in the reaction of PhCH?CHCH(OAc)Ph with NaHC(COOMe)₂).     

Formation of hydrogen-bonded complexes of 3,3′,5,5′-tetrabromo-2,2′-biphenol with MTBD and triethylamine

The complexes of 3,3′,5,5′-tetrabromo-2,2′-biphenol (TBBPh) with 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (MTBD) and triethylamine (TEA) were studied by FTIR spectroscopy. In chloroform and in acetonitrile a proton transfer from TBBPh to N-bases (MTBD, TEA) occurs. In chloroform solution the protonated N-base molecules are hydrogen-bonded to the deprotonated TBBPh molecules, whereas in acetonitrile the complexes dissociate. The intra- as well as intermolecular hydrogen bonds within the chains show large proton polarizability.     

1,1′‐Di­acetyl‐3‐hydroxy‐2,2′,3,3′‐tetra­hydro‐3,3′‐bi(1H‐indole)‐2,2′‐dione

In the title compound, C₂₀H₁₆N₂O₅, both of the 1‐acetyl­isatin (1‐acetyl‐1H‐indole‐2,3‐dione) moieties are planar and form a dihedral angle of 74.1 (1)°. Weak intermolecular hydrogen bonds and C—H?π interactions stabilize the packing in the crystal.     

Form III of 2,2′,4,4′,6,6′‐hexanitro­azobenzene (HNAB‐III)

The crystal structure of form III of the title compound, HNAB [systematic name: bis(2,4,6‐trinitro­phenyl)diazene], C₁₂H₄N₈O₁₂, has finally been solved as a pseudo‐merohedral twin (monoclinic space group P2₁, rather than the ortho­rhombic space group C222₁ suggested by diffraction symmetry) using a dual space recycling method. The significant differences in the room‐temperature densities of the three crystalline forms allow examination of molecular differences due to packing arrangements. An interesting relationship with the stilbene analog, HNS, is discussed. Interatomic separations are compared with other explosives and/or nitro‐containing compounds.     

Pseudopolymorphism in hydroxybenzophenones: the dihydrate of 2,2′,4,4′‐tetrahydroxybenzophenone

A dihydrate pseudopolymorph of bis(2,4‐dihydroxyphenyl)methanone, C₁₃H₁₀O₅·2H₂O, (I), was obtained during polymorphism screening of hydroxybenzophenone derivatives. This structure, in which the molecule sits on a twofold axis, was compared with the known anhydrous form of (I) [Schlemper (1982). Acta Cryst. B 38 , 554–559]. The role of water in the crystal assembly was established on the basis of the known monohydrate pseudopolymorph of 3,4‐dihydroxybenzophenone [Landre, Souza, Corrêa, Martins & Doriguetto (2010). Acta Cryst. C 66 , o463–o465].     

Functionalized 3,3′,5,5′‐Tetraaryl‐1,1′‐Biphenyls: Novel Platforms for Molecular Receptors

This paper describes the development of novel aromatic platforms for supramolecular construction. By the Suzuki cross‐coupling protocol, a variety of functionalized m‐terphenyl derivatives were prepared (Schemes 1–4). Macrolactamization of bis(ammonium salt) (S,S)‐ 6 with bis(acyl halide) 7 afforded the macrocyclic receptor (S,S)‐ 2 (Scheme 1), which was shown by ¹H‐NMR titration studies to form ‘nesting' complexes of moderate stability (K_a between 130 and 290 M ^?1, 300 K) with octyl glucosides 13 – 15 (Fig. 2) in the noncompetitive solvent CDCl₃. Suzuki cross‐coupling starting from 3,3′,5,5′‐tetrabromo‐1,1′‐biphenyl provided access to a novel series of extended aromatic platforms (Scheme 5) for cleft‐type (Fig. 1) and macrotricyclic receptors such as (S,S,S,S)‐ 1 . Although mass‐spectral evidence for the formation of (S,S,S,S)‐ 1 by macrolactamization between the two functionalized 3,3′,5,5′‐tetraaryl‐1,1′‐biphenyl derivatives (S,S)‐ 33 and 36 was obtained, the ¹H‐ and ¹³C‐NMR spectra of purified material remained rather inconclusive with respect to both purity and constitution. The versatile access to the novel, differentially functionalized 3,3′,5,5′‐tetrabromo‐1,1′‐biphenyl platforms should ensure their wide use in future supramolecular construction.     

Synthesis and characterization of new highly organosoluble poly(ether imide)s based on 3,3′,5,5′‐tetramethyl‐2,2‐bis[4‐(4‐dicarboxyphenoxy)phenyl]propane dianhydride

A new bis(ether anhydride), 3,3′,5,5′‐tetramethyl‐2,2‐bis[4‐(4‐dicarboxyphenoxy)phenyl]propane dianhydride ( 3 ), was prepared in three steps: the nitro displacement of 4‐nitrophthalonitrile with 2,2‐bis(4‐hydroxy‐3,5‐dimethylphenyl)propane, the alkaline hydrolysis of the intermediate bis(ether dinitrile), and the subsequent dehydration of the resulting bis(ether diacid). A series of new highly soluble poly(ether imide)s with tetramethyl and isopropylidene groups were prepared from the bis(ether anhydride) 3 with various diamines by a conventional two‐stage synthesis including polyaddition and chemical cyclodehydration. The resulting poly(ether imide)s had inherent viscosities of 0.54–0.73 dL g^?1. Gel permeation chromatography measurements revealed that the polymers had number‐average and weight‐average molecular weights of up to 54,000 and 124,000, respectively. All the polymers showed typical amorphous diffraction patterns. All of the poly(ether imide)s showed excellent solubility and were readily dissolved in various solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, pyridine, cyclohexanone, tetrahydrofuran, and even chloroform. Most of the polymers could be dissolved with chloroform concentrations as high as 30 wt %. These polymers had glass‐transition temperatures of 244–282 °C. Thermogravimetric analysis showed that all polymers were stable, with 10% weight losses recorded above 463 °C in nitrogen. These transparent, tough, and flexible polymer films were obtained through solution casting from N,N‐dimethylacetamide solutions. These polymer films had tensile strengths of 81–102 MPa and tensile moduli of 1.8–2.0 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2556–2563, 2002     

Spiro[3H‐pyrazole‐3,3′‐oxindoles] Derived from 1,2,3,4‐Tetrahydroquinoline

Aldol condensation of 5,6‐dihydro‐4H‐pyrrolo[3,2,1‐ij ]quinoline‐1,2‐dione with aryl methyl ketones generates 3‐(aroylmethylidene)oxindoles, which react with hydrazine to generate tricyclic spiro[3H‐pyrazole‐3,3′‐oxindoles].     

Shear‐enhanced crystallization of a thermoplastic polyimide derived from 3,3′,4,4′‐oxydiphthalic dianhydride and 4,4′‐oxydianiline

The aim of this work is to investigate the effect of consecutive shear on the crystallization of an amorphous aromatic polyimide (PI) derived from 3,3 ′ ,4,4 ′ ‐oxydiphthalic dianhydride (3,3 ′ ,4,4 ′ ‐ODPA) and 4,4 ′ ‐oxydianiline (ODA). At 260 °C, the increase of shear rate or shear time leads to the increase of crystallinity. Indeed, increasing shear rate can also accelerate the crystallization behavior. Moreover, it was found that a new melting peak appeared at higher temperature for long time or high rate sheared sample. The enhancement of crystallization behavior appears directly linked to the increase of crystal thickness. Particularly, the effect of shear temperature was investigated, and the results revealed that the crystallization of the PI was more sensitive to shear at 260 °C, which was 10° above the glass transition temperature (250 °C) of the PI. Possible mechanism was proposed to illustrate the effect of consecutive shear on the crystallization of the PI polymer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2344–2349, 2007     

Highly Soluble and Green Indigo Dyes: 4,4′,7,7′‐Tetraalkoxy‐5,5′‐diaminoindigotins

Two new types of 4,4′,7,7′‐tetraalkoxyindigotins, 1a – f and 2a – f along with the new N‐substituted indigotins 4e – f , were synthesized from dinitrobenzaldehydes 5a – f , which were prepared from 2‐hydroxy‐5‐methoxybenzaldehyde ( 7 ) via dialkoxybenzaldehydes 6a – f (Scheme). The new dialkoxyindigotin 3g was obtained from dialkoxybenzaldehyde 6g via nitrobenzaldehyde 8g . The 1,4‐dialkoxy‐2,3‐dinitrobenzenes 9 were isolated as by‐products. The 4,4′,7,7′‐tetraalkoxy‐5,5′‐diaminoindigotins 1 are soluble in organic solvents, and their solutions are green, which is highly uncommon for indigotins and is primarily caused by electronic effects of substituents, steric effects playing a minor role. The indigotins 1 produce a strong red shift of the longest‐wavelength absorption and negative solvatochromism indicating the predominance of polar resonance structures in the ground state. Tautomeric structures were excluded. These indigotins are valuable compounds for technical applications, for synthetic purposes, and for analytical studies. SANS (Small‐angle neutron scattering) experiments showed that certain 4,4′,7,7′‐tetraalkoxy‐5,5′‐diaminoindigotins 1 form rod‐like aggregates in solution. The similarly substituted 4,4′,7,7′‐tetraalkoxy‐5,5′‐dinitroindigotins 2 are far less soluble. They produce red monoanions (preferably dimers) and bluish‐purple dianions in organic solvents.     

Copolymers of Intrinsic Microporosity Based on 2,2′,3,3′‐Tetrahydroxy‐1,1′‐dinaphthyl

A series of new copolymers with high molecular weight and low polydispersity, prepared from tetrahydroxydinaphthyl, tetrahydroxyspirobisindane, and tetrafluoroterephthalonitrile monomers, prevent efficient space packing of the stiff polymer chains and consequently show intrinsic microporosity. One copolymer, DNPIM‐33, has an excellent combination of properties with good film‐forming characteristics and gas transport performance, and exhibits higher selectivity than the corresponding spirobisindane‐based homopolymer PIM‐1 for gas pairs, such as O₂/N₂, with a corresponding small decrease in permeability. This work demonstrates that significant improvements in properties may be obtained through development of copolymers with intrinsic microporosity (CoPIMs) that extends the spectrum of high‐molecular‐weight ladder structures of poly(dibenzodioxane)s.