基于分数阶傅里叶变换的水下目标宽带回波精确提取

线性调频信号可能将成为水下目标强度宽带测试的一种主要信号形式。本文在分析水中目标回声构成特点的基础上,探讨了一种滤除界面反射精确提取目标回波的方法。利用线性调频信号在一定分数阶傅立叶域呈现高度聚集的特性,将线性调频信号作为收发合置换能器的发射信号,在适当的分数阶傅立叶域中,目标回波和界面反射波如果表现为两个可分离的谱峰,就可以用窄带滤波的方法去除界面反射。本文给出了算法仿真及水池试验结果,即使对于和线性调频回波相距很近的界面反射,仍然可以有效去除,精确提取出目标回波。     

基于分数阶傅里叶变换的模式测控一体化方法

提出了一种基于分数阶傅里叶变换的模式测控一体化方法。利用分数阶傅里叶变换光路对光纤模式耦合态进行空间调制和相位调制,以实现模式的有效分解。与双重傅里叶变换（F²）法以及空间和频谱成像（S²）法相比,采用的分数阶傅里叶变换法,通过改变分数阶参数,控制模式的空间分布以及模式间的叠加状态,更易于分解出高阶模式。基于分数阶傅里叶变换的模式测量方法可在更广泛空间,研究模式的空间和相位叠加以及模式分解,也可退化为F²法和S²法。     

基于分数阶傅里叶变换的光学加密影片

随着通信与网络的快速发展,能够包含大容量信息的影片得到了广泛应用。利用分数阶傅里叶变换的特点,提出了一种全光学加密解密影片的方法。将现有的影片加密密钥从二重变为了四重,显著增加了影片的安全性。通过改变振幅型正弦光栅的作用位置,将影片的加密解密次数由现有的每帧各一次减小为总共一次,优化了算法。仿真结果验证了该方法的有效性。     

水下目标几何声散射回波在分数阶傅里叶变换域中的特性

水下目标散射回波在时域、频域混叠在一起, 而且受声波入射角度的影响严重, 在不同的入射角度下表现出很大的差异, 需要建立全方位入射角度下回波分量的理论分析模型. 本文推导了目标几何声散射分量在分数阶傅里叶变换域中随入射角度变化的解析表达式; 确定了目标几何声散射回波分量在最佳分数阶傅里叶变换域中的全方位模型, 从理论上证明了目标回波的几何特征形式; 给出了离散分数阶傅里叶变换对声散射分量的分辨能力和计算精度与发射信号带宽和观测时间之间的关系. 实验数据处理表明, 建立的分数阶傅里叶变换域的全方位模型与目标几何特征是一致的, 对未知入射角度下的目标识别提供了理论依据.     

基于分数阶傅里叶变换的弹载SAR成像算法

针对弹载合成孔径雷达(SAR)回波信号的多普勒参数随斜距变化大及传统脉冲压缩成像算法分辨率低的问题,本文提出了一种基于分数阶傅里叶变换(FrFT)的弹载SAR成像算法.首先建立弹载SAR末制导阶段回波信号模型,然后通过局部最优处理来测量回波信号的调频率,并以此计算FrFT的最优阶次,在最优阶次下分别对回波信号进行距离向和方位向的FrFT,从而得到成像区域的SAR图像,最后分别采用传统脉冲压缩成像算法与本文基于FrFT的成像算法进行仿真和实测对比实验.实验结果表明,该算法能够对目标区域精确成像;由于在成像处理过程中,对每个距离向和方位向的回波信号进行独立的局部最优处理,因此该算法更适应于弹载SAR的非线性飞行轨迹,大大提高了弹载SAR的成像性能.该研究成果在目标探测与识别,精确制导等领域中具有重要的应用价值.     

一种基于混沌和分数阶傅里叶变换的数字水印算法

基于混沌序列及离散分数阶傅里叶变换,提出了一种基于混沌和分数阶傅里叶变换的数字水印算法,并对算法及抗攻击性能进行了仿真分析.结果表明,该算法简单有效,对JPEG压缩、噪声、滤波等攻击具有良好的鲁棒性. 关键词： 数字水印 混沌 分数阶傅里叶变换 鲁棒性     

基于短时分数阶傅里叶变换域滤波的多项式相位信号时频检测

针对低信噪比下多个多项式相位信号提出了一种基于短时分数阶滤波的时频检测方法。分数阶傅里叶变换作为一种线性变换,能够实现线性调频信号检测与分离。而多项式相位信号在短时间内可以由线性调频信号提供良好的近似,故可以采用短时分数阶傅里叶变换实现多线性调频分量的检测与分离。对每个短时信号的时频分析进行叠加组合,即得到多个多项式相位信号的时频分析检测。计算机模拟仿真证明了此方法的有效性。     

离散分数阶傅里叶变换快速算法的DSP详细实现

为满足在数字信号处理器DSP(digital signal processor)上进行离散分数阶傅里叶变换DFRFT(discrete fractional fourier transform) 实时计算的要求，通过对多种DFRFT计算方法进行比较,选择Ozaktas提出的DFRFT快速算法进行基于DSP的详细实现处理。在对该快速算法进行理论分析的基础上，将快速算法的计算过程进行优化配置，并给出完整的计算量统计结果。在保证精度要求的情况下，提出的详细实现方法将快速算法的实数乘法计算量减至最小。工程实际应用表明：该方法满足DSP运算精度和实时性要求。     

简明分数阶傅里叶变换及其对线性调频信号的检测和参数估计

针对低信噪比下线性调频信号的检测问题,提出了一种简明分数阶傅里叶变换方法。该变换借助chirp相乘和傅里叶变换对时频平面上的频率轴进行旋转,以获取信号在各个角度下频率轴上的频谱分布。对时频分布呈直线状的线性调频信号,简明分数阶傅里叶变换能在特定角度上将信号能量聚集成尖锐的强能量峰,从而提高信噪比,实现对线性调频信号的可靠检测和参数估计。数值仿真和实验验证结果表明,简明分数阶傅里叶变换可对较低信噪比的线性调频信号实现有效检测,并由变换域峰值的位置对信号参数进行准确估计。相比于传统的分数阶傅里叶变换方法,简明分数阶傅里叶变换的复杂度更低,离散计算效率更高,在对噪声掩盖下的线性调频信号进行检测和参数估计时能更好地满足实时处理的要求。     

简明分数阶傅里叶变换及其对线性调频信号的检测和参数估计

针对低信噪比下线性调频信号的检测问题,提出了一种简明分数阶傅里叶变换方法。该变换借助chirp相乘和傅里叶变换对时频平面上的频率轴进行旋转,以获取信号在各个角度下频率轴上的频谱分布。对时频分布呈直线状的线性调频信号,简明分数阶傅里叶变换能在特定角度上将信号能量聚集成尖锐的强能量峰,从而提高信噪比,实现对线性调频信号的可靠检测和参数估计。数值仿真和实验验证结果表明,简明分数阶傅里叶变换可对较低信噪比的线性调频信号实现有效检测,并由变换域峰值的位置对信号参数进行准确估计。相比于传统的分数阶傅里叶变换方法,简明分数阶傅里叶变换的复杂度更低,离散计算效率更高,在对噪声掩盖下的线性调频信号进行检测和参数估计时能更好地满足实时处理的要求。     

A method for detecting target echo in reverberation based on fractional Fourier transform

A method for detecting the target echo in reverberation was proposed based on fractional Fourier transform theory when the transmitted signal is linear frequency modulation signal. The slow time-varying envelope of reverberation is computed to process reverberation to be stationary. The stationary reverberation is cut into blocks using a sliding window. A narrow-band filter is applied in FrFT domain for each block and the signal is recovered through inverse FrFT. Output of the system is the energy of the recovered signal. When the target echo is included in one of the blocks, the reverberation noise is reduced, and the output is the energy of the target echo. All the simulation and lake experiment results show that the detection performance of the present method is better than that of the matched filter.     

基于分数阶傅立叶变换的线性调频回波参数估计

本文提出了一种适用于宽带线性调频回波的分数阶傅立叶变换参数估计方法。它通过寻找合适的信号代替发射信号做模版,使得模版信号与接收信号的模糊函数匹配度高,峰值尖锐,失真率低。再利用分数阶傅立叶变换与模糊函数的关系,使用两次分数阶域的峰值搜索代替原有的一次二维搜索降低计算量。仿真实验结果表明,本文提出的方法在精确估计宽带回波的时延和频移的同时降低了计算复杂度。     

不对称离散分数傅里叶变换实现数字图像的加密变换

利用不对称分数傅里叶变换的特性,提出了一种图像加密变换的新方法。对图像的x,y方向分别实施不同级次的一维分数傅里叶变换,得到加密图像。解密方法就是对变换后的图像实施对应级次的分数傅里叶逆变换,只有当x,y方向的逆变换级次分别与原变换级次都相同或者满足周期条件时,才能恢复原图像。加密变换有效地提高了图像加密和防伪力度。数值计算验证了方法的正确性和可行性。     

Single phase encoding method based on the fractional Fourier transform

We propose a single phase encoding scheme for encrypting image by using fractional Fourier transform. Single phase mask is designed in order to be symmetrical about certain direction, which can be used in the process of both encryption and decryption. A conjugate mask is not required in the image decryption process, which is very convenient for the practical application in optics. Moreover, the optical implementation of the image encryption and decryption is given. The implementing structure is composed of lens and spherical mirror. Numerical simulations have demonstrated the validity and security of the encryption algorithm.     

Improved space time prewhitener for linear frequency modulation reverberation using fractional Fourier transform

This letter presents an improved space time prewhitening method for linear frequency modulation (LFM) reverberation. The proposed method transforms the reverberation to fractional Fourier domain to whiten using fractional Fourier transform. The linear varying frequency in LFM reverberation is focused on a stationary frequency, and the adjacent block signal is used as the reference signal of prewhitening. Finally, experiment results with real reverberation data verify that the proposed method improves the detection performance of active sonar in shallow sea significantly.     

The performance of methods based on the fractional Fourier transform for detecting marine mammal vocalizations

The analysis of cetacean vocalizations is considered using Fourier-based techniques that employ chirp functions in their decomposition. In particular, the paper considers a short-time methods based on the fractional Fourier transform for detecting frequency modulated narrow-band signals, such as dolphin whistles, and compares this to the classical short-time Fourier methods. The fractional Fourier technique explored computes transforms associated with a range of chirp rates and automatically selects the rate for the final analysis. This avoids the need for prior knowledge of signal's chirp rate. An analysis is presented that details the performance of both methods as signal detectors and allows one to determine their detection thresholds. These thresholds are then used to measure the detectability of synthetic signals. This principle is then extended to measure performance on a set of recordings of narrow-band vocalizations from a range of cetacean species.     

Nonlinear joint fractional Fourier transform correlation for target detection in hyperspectral image

In this paper, we present a spectral joint fractional Fourier transform correlation (SJFRTC) for detecting and identifying very small target with only a few pixels using reflectance spectral information in the hyperspectral imagery. In this technique, fractional correlation (FC) between input spectral signature and known reference spectral signature is performed digitally or optically. Binary differential technique is utilized to enhance the performance of the SJFRTC, resulting in delta-function-like correlation peaks without dc interference. Distinctive and distinguishable correlation performance is obtained using peak-to-clutter ratio (PCR) instead of absolute correlation peak value, which makes the proposed technique independent from the intensity variation of the spectral signature. Simulation results using real-life hyperspectral images show that the binary SJFRTC can detect both single or/and multiple targets successfully with excellent detection capability, as compared to the other traditional hyperspectral detection algorithms.