Synthesis and Characterization of a Bis(&mgr;-beta-diketonato)bis((1,2,5,6-eta)-1,5-dimethyl-1,5- cyclooctadiene)disilver Complex. An Intermediate in the Synthesis of an Isomerically Pure (beta-Diketonato)((1,2,5,6-eta)-1,5-dimethyl-1,5-cyclooctadiene)copper(I) Complex

Dimethyl-1,5-cyclooctadiene (DMCOD) is synthesized by the Ni-catalyzed dimerization of isoprene and consists of 80% 1,5-dimethyl-1,5-cyclooctadiene (1,5-DMCOD) and 20% 1,6-dimethyl-1,5-cyclooctadiene (1,6-DMCOD). Reaction of Hhfac (1,1,1,5,5,5-hexafluoro-2,4-pentanedione) with Ag(2)O in the presence of DMCOD results in the formation of isomeric Ag(I) species. Repeated recrystallizations yield an isomerically pure compound ((1,5-DMCOD)Ag(hfac))(2) that was characterized by X-ray crystallography and (1)H and (13)C NMR and IR spectroscopy. X-ray crystallography revealed a dinuclear complex with a short Ag-Ag spacing (3.0134(3) ? at -150 degrees C and 3.0278(5) ? at -20 degrees C) and bridging hfac ligands (&mgr;(2) bonding). The overall geometry around the Ag atoms is a deformed tetrahedron with two short Ag-O bonds (2.375 ? average) and two Ag-diene bonds. The methyl groups of the 1,5-DMCOD ligand are pointed toward the center of the molecule. Decomposition of the silver complex in a biphasic HCl (1 M)/CH(2)Cl(2) mixture liberates isomerially pure 1,5-DMCOD; this diene is subsequently used to synthesize isomerically pure (1,5-DMCOD)Cu(hfac). The latter compound was characterized by (1)H and (13)C NMR and IR spectroscopy and is a useful liquid precursor for Cu CVD. Crystallographic data: C(30)H(34)Ag(2)F(12)O(4), monoclinic, P2(1)/c (No. 14), Z = 4; at -150 degrees C, a = 12.428(1) ?, b = 11.071(1) ?, c = 24.520(2) ?, beta = 101.98(1) degrees; at -20 degrees C, a = 12.597(1) ?, b = 11.191(1) ?, c = 24.641(2) ?, beta = 102.08(1) degrees.     

Correlation between C and O chemical shifts and torsional strain in spiroacetals

The relationship between the ¹³C and ¹⁷O NMR chemical shifts and the dihedral energies (non-bonding interactions) of 1,4-dioxaspiro[4.4]nonane, 1,4-dioxa- and 6,10-dioxaspiro[4.5]decane, 1,4-dioxa- and 6,11-dioxaspiro[4.6]undecane, 1,5-dioxaspiro[5.5]undecane, 1,5-dioxa and 7,12-dioxaspiro[5.6]dodecane and 1,6-dioxaspiro[6.6]tridecane were analyzed. These data showed correlation of the non-bonding interactions with the chemical shift of the spiranic carbon, as well as a linear relationship between ¹³C and ¹⁷O.     

Preparation and properties of methoxycarbonylsulfenyl isocyanate, CH(3)OC(O)SNCO

Pure methoxycarbonylsulfenyl isocyanate, CH3OC(O)SNCO, is quantitatively prepared by the metathesis reaction between CH3OC(O)SCl and AgNCO. This novel species has been obtained in its pure form and characterized by 1H and 13C NMR, UV-vis, FTIR, and FT-Raman spectroscopy. The conformational properties of the gaseous molecule have been studied by vibrational spectroscopy and quantum chemical calculations (B3LYP and MP2 methods). The compound exhibits a conformational equilibrium at room temperature having the most stable form CS symmetry with the C=O double bond synperiplanar with respect to the S-N single bond. A second form was observed in the IR spectrum and corresponds to a conformer possessing the C-S bond antiperiplanar with respect to the N=C double bond of the isocyanate group. The structure of a single crystal of CH3OC(O)SNCO was determined by X-ray diffraction analysis at low temperature using a miniature zone melting procedure. The crystalline solid (triclinic, P1, a = 8.292(6) A, b = 9.839(7) A, c = 11.865(8) A, alpha = 67.290(2) degrees , beta = 71.5570(10) degrees , gamma = 83.4850(10) degrees and Z = 6) shows the presence of molecules having exclusively a synperiplanar conformation with respect to the three phi(CO-C=O), phi(O=C-SN), and phi(CS-N=C) dihedral angles.     

A solid state 13C NMR, crystallographic, and quantum chemical investigation of chemical shifts and hydrogen bonding in histidine dipeptides

We report the first solid-state NMR, crystallographic, and quantum chemical investigation of the origins of the 13C NMR chemical shifts of the imidazole group in histidine-containing dipeptides. The chemical shift ranges for Cgamma and Cdelta2 seen in eight crystalline dipeptides were very large (12.7-13.8 ppm); the shifts were highly correlated (R2= 0.90) and were dominated by ring tautomer effects and intermolecular interactions. A similar correlation was found in proteins, but only for buried residues. The imidazole 13C NMR chemical shifts were predicted with an overall rms error of 1.6-1.9 ppm over a 26 ppm range, by using quantum chemical methods. Incorporation of hydrogen bond partner molecules was found to be essential in order to reproduce the chemical shifts seen experimentally. Using AIM (atoms in molecules) theory we found that essentially all interactions were of a closed shell nature and the hydrogen bond critical point properties were highly correlated with the N...H...O (average R2= 0.93) and Nepsilon2...H...N (average R2= 0.98) hydrogen bond lengths. For Cepsilon1, the 13C chemical shifts were also highly correlated with each of these properties (at the Nepsilon2 site), indicating the dominance of intermolecular interactions for Cepsilon1. These results open up the way to analyzing 13C NMR chemical shifts, tautomer states (from Cdelta2, Cepsilon1 shifts), and hydrogen bond properties (from Cepsilon1 shifts) of histidine residue in proteins and should be applicable to imidazole-containing drug molecules bound to proteins, as well.     

Thermal decomposition of monocalcium aluminate decahydrate (CaAl2O4.10H2O) investigated by in-situ synchrotron X-ray powder diffraction, thermal analysis and 27Al, 2H MAS NMR spectroscopy

The stability of monocalcium aluminate decahydrate, with the nominal composition CaAl(2)O(4).10H(2)O (CAH(10)), has a decisive role for the strength development and durability of cementitious materials based on high alumina cements. This has prompted an investigation of the thermal transformation of crystalline monocalcium aluminate decahydrate in air to an amorphous phase by in-situ synchrotron X-ray powder diffraction in the temperature range from 25 to 500 degrees C, by DTA/TGA, and (2)H, (27)Al MAS NMR spectroscopy. The decomposition includes the loss of hydrogen-bonded water molecules in the temperature range up to 175 degrees C, coupled with a reduction of the unit cell volume from 1928 A(3) at 25 degrees C, to 1674 A(3) at 185 degrees C. Furthermore, X-ray diffraction shows that CaAl(2)O(4).10H(2)O starts to transform to an amorphous phase at approximately 65 degrees C. This phase is fully developed at approximately 175 degrees C and it converts to crystalline CaAl(2)O(4) when heated to 1300 degrees C. The thermal decomposition in the temperature range from approximately 65 to approximately 175 degrees C involves both formation of an amorphous phase including AlO(4) tetrahedra and structural changes in the remaining crystalline phase.     

Preparation, isolation, and characterization of Nalpha-Fmoc-peptide isocyanates: solution synthesis of oligo-alpha-peptidyl ureas

The N(alpha)-Fmoc-peptide isocyanates 3a-q, 4a-c, and 5a-c were prepared by the Curtius rearrangement of N(alpha)-Fmoc-peptide acid azides in toluene under thermal, microwave, and ultrasonic conditions. All the N(alpha)-Fmoc-oligo-peptide isocyanates made were isolated as stable crystalline solids with 71 to 94% yield and were fully characterized by 1H NMR, 13C NMR, and mass spectroscopy. Their utility for the synthesis of oligo-alpha-peptidyl ureas 7a-f and 8a-c by the divergent coupling approach was demonstrated. The coupling of N(alpha)-Fmoc-dipeptide isocyanates with amino acid ester or with N,O-bis(trimethylsilyl)amino acids resulted in N(alpha)-Fmoc-tripeptidyl urea ester and acids containing one each of peptide bond and urea bond. The divergent approach is extended to the synthesis of tetrapeptidyl ureas by the 2 + 2 strategy using bis-TMS-peptide acid as an amino component. To incorporate urea bonds in adjacent positions, N(alpha)-Fmoc-peptidyl urea isocyanates 9a-d were prepared and employed in the synthesis of three tetrapeptidyl ureas 10a-b and 11 containing one peptide bond and two urea bonds in series from the N-terminal end. The protocol was then employed for the synthesis of five urea analogues 13-15, 18, and 21 of [Leu5]enkephalin containing urea bonds at the 2, 3, 4 positions as well as at the 2, 4 and 2, 3, 4 positions. The analogue 2l was made by the convergent synthesis by the N --> C terminal chain extension. Finally, two urea analogues 22 and 23 of repeat units of bioelasto polymers, namely Val-Pro-Gly-Val-Gly-OH and Pro-Gly-Val-Gly-Val-OH, were synthesized incorporating the urea bond by the concomitant isocyanate generation and urea bond formation under thermal conditions.     

二、三分枝甘露糖簇衍生物的合成

采取一种有效途径合成了二、三分支的甘露糖簇分子．甘露糖经烯丙苷化、乙 酰基保护后，将其烯丙基的双键氧化得到带有羧基连接臂的甘露糖衍生物，然后再 分别与l，6-己二胺和三(2-氨乙基)胺进行缩合反应，最后脱掉保护基，得到二分 枝甘露糖簇化合物6和三分枝甘露糖簇化合物8．     

Guest driven rearrangements of protonation and hydrogen bonding in decavanadate anions as their tetraalkylammonium salts

Single crystal X-ray structure determinations of [(n-C5H11)4N]3[H3V10O28].2(CH3)2CO (TAA-acetone), [(n-C5H11)4N]8[H3V10O28]2[H4V10O28].7C4H8O2 (TAA-dioxane), [(n-C5H11)4N]3[H3V10O28] (TAAh) and [(n-C6H13)4N]2[H4V10O28].4C4H8O2 (THA-dioxane) revealed that protonation and hydrogen bond formation of decavanadate anions in their tetraalkylammonium salts are influenced by the nature of the solvent molecules incorporated as guests into the crystals. When crystallized with acetone molecules, the decavanadate anion forms a self-associated hydrogen-bonded dimer of ([H3V10O28](3-))2 to hide the protons from the aprotic protophobic acetone molecules. When crystallized with 1,4-dioxane molecules, the decavanadate anion exposes its protons to the aprotic protophilic 1,4-dioxane molecules to form a hydrogen-bond assisted solvation complex of ((C4H8O2)4...[H4V10O28)](2-)). Size effects of the tetraalkylammonium cations on crystallizing these hydrogen-bonded assemblies were also examined.     

Synthesis and structure of new water-soluble and stable tantalum compound: ammonium tetralactatodiperoxo-mu-oxo-ditantalate(V)

The stable water-soluble tantalum complex with lactic acid (ammonium tetralactatodiperoxo-mu-oxo-ditantalate(V)), (NH4)4[Ta2(C3H4O3)4(O2)2O].3H2O, was prepared in the crystalline form. According to the single-crystal X-ray diffraction data, this compound forms a monoclinic cell with a = 13.85(2) A, b = 9.06(1) A, c = 12.32(2) A, and beta = 116.30 degrees , space group C2 (No. 2), and has Z = 2 molecules per unit cell. The solid-state 13C NMR data and low flack parameter are consistent with the determined structure. Appearance of the same vibration modes in Raman and IR spectra supports the choice of the space group without inversion symmetry. The solution of the tantalum complex was successfully applied for the synthesis of two photocatalytic materials, NaTaO3 and Sr2Ta2O7.     

2,6‐Diaryl‐4,4‐disubstituted 1,4‐dihydropyridines: Source for spiro heterocycles

Novel spiro heterocycles ( 5–12 ) were obtained by the cyclocondensation of 2,6‐diaryl‐4,4‐dimethoxycarbonyl‐/4‐cyano‐4‐ethoxycarbonyl‐1,4‐dihydropyridines( 3/4 ) with hydrazine hydrate, hydroxylamine hydrochloride, urea, and thiourea. All the compounds were characterized by IR, ¹H NMR, and ¹³C NMR spectral data.© 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:513–517, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10183     

Synthetic, spectroscopic, computational and structural studies of some 13-vertex ruthenacarboranes

Reduction of 1,2-closo-C2B10H12 followed by treatment with [RuCl2(p-cymene)]2(p-cymene = C6H4MeiPr-1,4) affords the 13-vertex ruthenacarborane 4-(p-cymene)-4,1,6-closo-RuC2B10H12, characterised both spectroscopically and, in two crystalline forms, crystallographically. Although asymmetric in the solid state, having a docosahedral cage architecture with cage C atoms at vertices 1 and 6, this species clearly has Cs symmetry on the NMR timescale at room temperature. However, the fluctional process in operation can be arrested at low temperature, and an activation energy of 43.1 kJ mol(-1) is estimated. A computational study of the related species 4-(eta-C6H6)-4,1,6-closo-RuC2B10H12 reveals that the fluctionality is due to a double diamond-square-diamond process, first suggested by Hawthorne et al for the analogous CpCo species. These calculations yield an activation energy of 40.4 kJ mol(-1), in excellent agreement with that derived from experiment. Reduction of 1,2-Ph(2)-1,2-closo-C2B10H10 followed by treatment with [RuCl2(eta-C6H6)]2 or [RuCl2(p-cymene)]2 yields the analogous species 1,6-Ph2-4-(eta-C6H6)-4,1,6-closo-RuC2B10H10 and 1,6-Ph2-4-(p-cymene)-4,1,6-closo-RuC2B10H10, respectively. These C,C-diphenyl compounds were again studied spectroscopically and crystallographically, the p-cymene species again showing two crystalline modifications. In contrast to their CpCo and Cp*Co analogues all three ruthenacarboranes do not undergo isomerisation in refluxing toluene.     

Ruthenium nanoparticles inside porous [Zn4O(bdc)3] by hydrogenolysis of adsorbed [Ru(cod)(cot)]: a solid-state reference system for surfactant-stabilized ruthenium colloids

The gas-phase loading of [Zn4O(bdc)3] (MOF-5; bdc = 1,4-benzenedicarboxylate) with the volatile compound [Ru(cod)(cot)] (cod = 1,5-cyclooctadiene, cot = 1,3,5-cyclooctatriene) was followed by solid-state (13)C magic angle spinning (MAS) NMR spectroscopy. Subsequent hydrogenolysis of the adsorbed complex inside the porous structure of MOF-5 at 3 bar and 150 degrees C was performed, yielding ruthenium nanoparticles in a typical size range of 1.5-1.7 nm, embedded in the intact MOF-5 matrix, as confirmed by transmission electron microscopy (TEM), selected area electron diffraction (SAED), powder X-ray diffraction (PXRD), and X-ray absorption spectroscopy (XAS). The adsorption of CO molecules on the obtained Ru@MOF-5 nanocomposite was followed by IR spectroscopy. Solid-state (2)H NMR measurements indicated that MOF-5 was a stabilizing support with only weak interactions with the embedded particles, as deduced from the surprisingly high mobility of the surface Ru-D species in comparison to surfactant-stabilized colloidal Ru nanoparticles of similar sizes. Surprisingly, hydrogenolysis of the [Ru(cod)(cot)]3.5@MOF-5 inclusion compound at the milder condition of 25 degrees C does not lead to the quantitative formation of Ru nanoparticles. Instead, formation of a ruthenium-cyclooctadiene complex with the arene moiety of the bdc linkers of the framework takes place, as revealed by (13)C MAS NMR, PXRD, and TEM.     

Conformational equilibria in formic acid and the adduct of formic acid and hexafluoroacetone, HCO2C(CF3)2OH

Low-temperature 1H and 13C NMR spectra of formic acid (1) showed separate signals for the E and Z conformations in solvents containing a hydrogen bond acceptor, dimethyl ether. The population of E-1 (6.2% in 3:1:1 CHClF2/CHCl2F/(CH3)2O) was larger than that for 13C-labeled methyl formate in the same solvent (0.2%), which indicated that the relative populations are not determined by steric effects. The free-energy difference between the E and Z conformations of 1 was 0.9 kcal/mol. In a 1:3 CD2Cl2/(CH3)2O solvent mixture, peaks for E and Z conformations were found at low temperatures by 1H and 13C NMR for both formic acid and an adduct with hexafluoroacetone, HCO2C(CF3)2OH (2). The population of E-1 in this solvent mixture was 4.3% by 13C NMR. The carbon spectrum showed two peaks in the carbonyl carbon region of nearly equal intensities at -151.6 degrees C, with E-2 (48%) absorbing downfield of the major Z-2 (52%). The large population of E-2 confirms that electron-withdrawing groups R' in RCO2R' enhance the populations of the E-isomers. The free-energy barriers for 2 of 6.24 (E-to-Z) and 6.26 kcal/mol (Z-to-E) were determined from rate constants obtained by line shape analysis at -143.2 degrees C.     

Study of the reaction of chalcone analogs of dehydroacetic acid and o-aminothiophenol: synthesis and structure of 1,5-benzothiazepines and 1,4-benzothiazines

Treatment of α,β-unsaturated carbonyl compounds, obtained by the reaction of DHA and aromatic (or heteroaromatic) aldehydes, with o-aminothiophenol results in the formation of 1,5-benzothiazepines and/or 1,4-benzothiazines depending upon the reaction conditions and structure of the aldehydes. The products were characterized by the combined use of multinuclear 1D and 2D NMR and GIAO/DFT calculations of ¹H, ¹³C and ¹⁵N chemical shifts. The tautomerism of these compounds in solution was determined, they have an exocyclic CC double bond.     

New class of oligonuclear platinum-thallium compounds with a direct metal-metal bond. 5. Structure determination of heterodimetallic cyano complexes in aqueous solution by EXAFS and vibrational spectroscopy

The structures of three closely related heterodimetallic cyano complexes, [(NC)(5)Pt-Tl(CN)(n)()](n)()(-) (n = 1-3), formed in reactions between [Pt(II)(CN)(4)](2)(-) and Tl(III) cyano complexes, have been studied in aqueous solution. Multinuclear NMR data ((205)Tl, (195)Pt, and (13)C) were used for identification and quantitative analysis. X-ray absorption spectra were recorded at the Pt and Tl L(III) edges. The EXAFS data show, after developing a model describing the extensive multiple scattering within the linearly coordinated cyano ligands, short Pt-Tl bond distances in the [(NC)(5)Pt-Tl(CN)(n)()](n)()(-) complexes: 2.60(1), 2.62(1), and 2.64(1) A for n = 1-3, respectively. Thus, the Pt-Tl bond distance increases with increasing number of cyano ligands on the thallium atom. In all three complexes the thallium atom and five cyano ligands, with a mean Pt-C distance of 2.00-2.01 A, octahedrally coordinate the platinum atom. In the hydrated [(NC)(5)Pt-Tl(CN)(H(2)O)(4)](-) species the thallium atom coordinates one cyano ligand, probably as a linear Pt-Tl-CN entity with a Tl-C bond distance of 2.13(1) A, and possibly four loosely bound water molecules with a mean Tl-O bond distance of about 2.51 A. In the [(NC)(5)Pt-Tl(CN)(2)](2)(-) species, the thallium atom probably coordinates the cyano ligands trigonally with two Tl-C bond distances at 2.20(2) A, and in [(NC)(5)Pt-Tl(CN)(3)](3)(-) Tl coordinates tetrahedrally with three Tl-C distances at 2.22(2) A. EXAFS data were reevaluated for previously studied mononuclear thallium(III)-cyano complexes in aqueous solution, [Tl(CN)(2)(H(2)O)(4)](+), [Tl(CN)(3)(H(2)O)], and [Tl(CN)(4)](-), and also for the solid K[Tl(CN)(4)] compound. A comparison shows that the Tl-C bond distances are longer in the dinuclear complexes [(NC)(5)Pt-Tl(CN)(n)()](n)()(-) (n = 1-3) for the same coordination number. Relative oxidation states of the metal atoms were estimated from their (195)Pt and (205)Tl chemical shifts, confirming that the [(NC)(5)Pt-Tl(CN)(n)()](n)()(-) complexes can be considered as metastable intermediates in a two-electron-transfer redox reaction from platinum(II) to thallium(III). Vibrational spectra were recorded and force constants from normal-coordinate analyses are used for discussing the delocalized bonding in these species.     

Properties of chloroformyl peroxynitrate, ClC(O)OONO(2)

The synthesis of ClC(O)OONO(2) is accomplished by photolysis of a mixture of Cl(2), NO(2), and CO in large excess of O(2) at about -70 degrees C. The product is isolated after repeated trap-to-trap condensation. The solid compound melts at -84 degrees C, and the extrapolated boiling point is 80 degrees C. ClC(O)OONO(2) is characterized by IR, Raman, (13)C NMR, and UV spectroscopy. According to the IR matrix spectra, the compound exists at room temperature only as a single conformer. The molecular structure of ClC(O)OONO(2) is determined by gas electron diffraction. The molecule possesses a gauche structure with a dihedral angle of phi(COON) = 86.7(19) degrees , and the C=O bond is oriented syn with respect to the O-O bond. The short O-O bond (1.418(6) A) and the long N-O bond (1.511(8) A) are consistent with the facile dissociation of ClC(O)OONO(2) into the radicals ClC(O)OO and NO(2). The experimental geometry of ClC(O)OONO(2) is reproduced reasonably well by B3LYP/6-311+G(2df) calculations, whereas the MP2 approximation predicts the N-O bond considerably too long and the dihedral angle too small.     

Evaluation of backbone proton positions and dynamics in a small protein by liquid crystal NMR spectroscopy

NMR measurements of a large set of protein backbone one-bond dipolar couplings have been carried out to refine the structure of the third IgG-binding domain of Protein G (GB3), previously solved by X-ray crystallography at a resolution of 1.1 A. Besides the commonly used bicelle, poly(ethylene glycol), and filamentous phage liquid crystalline media, dipolar couplings were also measured when the protein was aligned inside either positively or negatively charged stretched acrylamide gels. Refinement of the GB3 crystal structure against the (13)C(alpha)-(13)C' and (13)C'-(15)N dipolar couplings improves the agreement between experimental and predicted (15)N-(1)H(N) as well as (13)C(alpha)-(1)H(alpha) dipolar couplings. Evaluation of the peptide bond N-H orientations shows a weak anticorrelation between the deviation of the peptide bond torsion angle omega from 180 degrees and the angle between the N-H vector and the C'-N-C(alpha) plane. The slope of this correlation is -1, indicating that, on average, pyramidalization of the peptide N contributes to small deviations from peptide bond planarity ( = 179.3 +/- 3.1 degrees ) to the same degree as true twisting around the C'-N bond. Although hydrogens are commonly built onto crystal structures assuming the N-H vector orientation falls on the line bisecting the C'-N-C(alpha) angle, a better approximation adjusts the C(alpha)-C'-N-H torsion angle to -2 degrees. The (15)N-(1)H(N) dipolar data do not contradict the commonly accepted motional model where angular fluctuations of the N-H bond orthogonal to the peptide plane are larger than in-plane motions, but the amplitude of angular fluctuations orthogonal the C(alpha)(i-1)-N(i)-C(alpha)(i) plane exceeds that of in-plane motions by at most 10-15 degrees. Dipolar coupling analysis indicates that for most of the GB3 backbone, the amide order parameters, S, are highly homogeneous and vary by less than +/-7%. Evaluation of the H(alpha) proton positions indicates that the average C(alpha)-H(alpha) vector orientation deviates by less than 1 degrees from the direction that makes ideal tetrahedral angles with the C(alpha)-C(beta) and C(alpha)-N vectors.     

Functional disubstituted polyacetylenes: Synthesis, liquid crystallinity, light emission, and fluorescent photopatterning of biphenyl-containing poly(1-phenyl-octyne)s with different functional bridges

Biphenyl (Biph)-containing 1-phenyl-1-octynes and their polymers are synthesized, and the effects of functional bridge groups on the mesomorphic and optical properties of the polymers are studied. The nonmesomorphic disubstituted acetylene monomers (C6H13)C[triple bond]C(C6H4)O(CH2)12O-Biph-OC7H15 (1), (C6H13)C[triple bond]C(C6H4)O(CH2)11OOC-Biph-OC7H15 (2), and (C6H13)C[triple bond]C(C6H4)CO2(CH2)12OOC-Biph-OC7H15 (3) are prepared by multistep reaction routes and converted into their corresponding polymers P1-P3 by a WCl6-Ph4Sn catalyst. The structures and properties of the polymers are characterized and evaluated by NMR, TGA, DSC, POM, XRD, UV, and PL analyses. The mesogenic pendants have endowed the polymers with high thermal stability (> or =400 degrees C). While P1 exhibits no liquid crystallinity, P2 and P3 form enantiotropic S(A) phase with a monolayer structure. Upon photoexcitation, the polymers emit blue and blue-green lights of 460 and 480 nm, respectively, in THF with quantum efficiencies larger than 30%. UV irradiation of a thin film of P2 through a mask oxidizes and quenches the light emission of the exposed regions, generating a two-dimensional luminescent photoimage.     

Synthesis, molecular structure, spectral properties and antifungal activity of polymethylene-α,ω-bis(N,N- dimethyl-N-dodecyloammonium bromides)

Hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide), pentamethylene-1,5-bis(N,N-dimethyl-N-dodecylammonium bromide), tetramethylene-1,4-bis(N,N-dimethyl-N-dodecylammonium bromide), trimethylene-1,3-bis(N,N-dimethyl-N-dodecylammonium bromide) and ethylene-1,2-bis(N,N-dimethyl-N-dodecylammonium bromide) have been obtained and characterized by FTIR and NMR spectroscopy. DFT calculations have also been carried out. The optimized bond lengths, bond angles and torsion angles calculated by Hartree-Fock/3-21G(d,p) approach have been presented. MIC values for A. niger, P. chrysogenum, C. albicans have been determined and the relationship between MIC and spacer length has been discussed.     

Synthesis and structural characterization of C(OTeF5)4 and a comparative structural study of the isoelectronic B(OTeF5)4- anion

Tetrakis(pentafluoroorthotellurate)carbon(IV), C(OTeF5)4, was synthesized by reaction of CBr4 with BrOTeF5 in SO2ClF solution at -78 degrees C and was isolated as a colorless, crystalline solid that is room-temperature stable in SO2ClF and in the solid state. Both natural abundance and 99% 13C-enriched C(OTeF5)4 have been characterized in SO2ClF solution by 13C, 19F, and 125Te NMR spectroscopy. In contrast, C(OTeF5)4 undergoes rapid decomposition to O(TeF5)2 and CO2 in CH3CN at 10 degrees C but is stable at -40 degrees C. The X-ray crystal structures of C(OTeF5)4 and [N(CH3)4][B(OTeF5)4] were determined at -30 and -170 degrees C, respectively. The averages of four smaller C/B-O-Te bond angles and O...O contacts and two larger C/B-O-Te bond angles and O...O contacts of C(OTeF5)4 and the isoelectronic B(OTeF5)4- anion are consistent with local S4 symmetry, as predicted by ligand close packing considerations. The existence of three sets of Te-O-C/B-O torsion angles and the energy-minimized geometries of C(OTeF5)4 and B(OTeF5)4- also confirm their local S4 symmetries. The low-temperature, solid-state Raman spectra of 12/13C(OTeF5)4 and B(OTeF5)4- were assigned and compared. The energy-minimized geometries, vibrational frequencies, natural charges, and natural bond orders of both species have been calculated using density functional theory methods. The calculated geometries are in accord with the S4 symmetries assigned for the experimental structures.